| Age | Commit message (Collapse) | Author |
|---|
|
The commit 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio") introduced a
regression causing the wlcore to time out and go into recovery. Reverting the
changes regarding write of the last partition size brings the module back to
it's functional state.
Fixes: 3719c17e1816 ("wlcore/wl18xx: fw logger over sdio")
Reported-by: Ross Green <rgkernel@gmail.com>
Signed-off-by: Emil Goode <emil.fsw@goode.io>
[kvalo@codeaurora.org: improved commit log]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Fix the below Oops when trying to modprobe wlcore_spi.
The oops occurs because the wl1271_power_{off,on}()
function doesn't check the power() function pointer.
[ 23.401447] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
[ 23.409954] pgd = c0004000
[ 23.412922] [00000000] *pgd=00000000
[ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM
[ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211
musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev
omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23
c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma
snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon
[ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted
4.2.0-00002-g951efee-dirty #233
[ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 23.468123] Workqueue: events request_firmware_work_func
[ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000
[ 23.479341] PC is at 0x0
[ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore]
[ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013
[ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000
[ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00
[ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 :
dce0d2e0
[ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 :
dc848810
[ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM
Segment kernel
[ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015
[ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218)
[ 23.539760] Stack: (0xde4efe50 to 0xde4f0000)
[...]
[ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from
[<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore])
[ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>]
(request_firmware_work_func+0x30/0x58)
[ 23.685784] [<c04387ec>] (request_firmware_work_func) from
[<c0058e2c>] (process_one_work+0x1b4/0x4b4)
[ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>]
(worker_thread+0x3c/0x4a4)
[ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>]
(kthread+0xd4/0xf0)
[ 23.711747] [<c005ee68>] (kthread) from [<c000f598>]
(ret_from_fork+0x14/0x3c)
[ 23.719357] Code: bad PC value
[ 23.722760] ---[ end trace 981be8510db9b3a9 ]---
Prevent oops by validationg power() pointer value before
calling the function.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Cc: stable@vger.kernel.org
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Enable the FW Logger to work over the SDIO interface in addition to over UART
interface. In the new design we use fw internal memory instead of packet ram
that was used in older (wl12xx) design. This change reduces the impact on TP
and stability.
A new event was added to notify fw logger is ready for reading. Dynamic
configuration to debugfs was added as well.
Signed-off-by: Shahar Patury <shaharp@ti.com>
Signed-off-by: Guy Mishol <guym@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
When the chip is in ELP mode read/write to FW is invalid and may cause
the lower layers to get stuck. The reads/writes concerning ELP wakeup
are the exception here and are checked for. In addition to blocking the
IO, produce a warning.
Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
FW memory block size and FW log end marker parameters
are added to wl structure and are initialized per
chip architecture.
convert_hwaddr hw operation is added to convert chip
dependent FW internal address.
Copy from FW log is also simplified to copy the entire
memory block as FW logger utility is repsponsible
for parsing of FW log content.
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
Some of the mmc drivers initiate DMA transfers with buffers passed from
higher layers. This means that the driver shouldn't ever pass non
DMA-able buffers, such as ones that are unaligned, allocated on the
stack or static.
Fix a couple of calls to the mmc layer in which buffers which weren't
necessarily DMA-able were passed.
[Use sizeof(*wl->buffer_32) instead of sizeof(u32) -- Luca]
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
When a function requests to recover, it would normally abort and will
not send any additional commands to the HW. However, other threads may
not be aware of the failure and could try to communicate with the HW
after a recovery was queued, but before the recovery work began.
Fix this by introducing an intermediate state which is set when recovery
is queued, and modify all state checks accordingly.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <luca@coelho.fi>
|
|
If some IO read/write fails while the FW is not loaded, a recovery
will not take place. This means the SDIO_FAILED flag will stay in place
forever and prevent further read/writes.
This can happen if a check for STATE_OFF was forgotten in some routine.
Take this opportunity to rename the flag to IO_FAILED, since we support
other buses as well.
Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
|
|
The interrupt line is disabled in op_stop using disable_irq. Since
pending interrupts are synchronized, the mutex has to be released before
disabling the interrupt to avoid a deadlock with the interrupt handler.
In addition, the internal state of the driver is only set to 'off'
after the interrupt is disabled. Otherwise, if an interrupt fires after
the state is set but before the interrupt line is disabled, the
interrupt handler will not be able to acknowledge the interrupt
resulting in an interrupt storm.
The driver's operations might be called during recovery. If these
acquire the mutex after it was released by op_stop, but before the
driver's state is changed, they may queue new work items instead of just
failing. This is especially problematic in the case of scans, in which a
new scan may be scheduled after all scan requests were cancelled.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
|
|
Set a flag and after the first read/write failure is encountered.
This flag will disallow further SDIO read/writes until op_stop() is
executed, which will clear all flags.
This prevents further errors from occurring, since one error usually
indicates that IO operations won't work anymore until the chip is
rebooted. By blocking more calls, we avoid extra timeouts and having
to wait for them to occur.
[Added second paragraph explaining why the change is needed. -- Luca]
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
All io functions' return values should be propagated and handled. Add a
__must_check annotation to verify that the return values are checked and
to avoid future mistakes.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Propagate errors from wl1271_read_hwaddr. This function is only used
when reading the FW log (following a recovery), so don't read the FW log
in case of a bus error.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Propagate errors from wl1271_raw_write32 and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Propagate errors from wl1271_raw_read32. Since the read functions had no
way of returning errors in-band, change their prototypes.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Propagate errors from wl1271_write and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Propagate errors from wl1271_read and request for recovery when
appropriate.
Also rename prefixes of wlcore functions which their prototypes had to
be changed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
wlcore_raw_read_data is called when the FW status is read which happens
while handling interrupts and when the FW log is read following a
recovery. Request a recovery in the former case, and don't read the FW
log in case the FW status read failed.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Make wl1271_raw_write and wl1271_raw_read return errors so the driver
could handle these appropriately.
Since the prototype has changed, also rename the prefix of these
functions to wlcore.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
In case a recovery is initiated, the FW can no longer be trusted, and
the driver should not handle any new FW events.
Disable the interrupt handler when a recovery is scheduled and balance
it back in the op_stop callback.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
wl12xx_sdio_power_off() manually powers down the card regardless of the
runtime pm state. If wl12xx_sdio_power_on() is called before the card
was suspended by runtime PM, it will not power up the card.
As part of the HW detection, the chip's power is toggled. Since this
happens in the context of probing sdio, the power reference counter will
be higher than zero. As a result, when wl12xx_sdio_power_off() is
called, the chip will be powered down while still having a positive
power reference counter. If the interface is quickly activated, the
driver might try to transfer data to a powered off chip.
Fix this by ensuring that wl12xx_sdio_power_on() explicitly powers on
the chip in case runtime pm claims the chip is already powered on. To
avoid cases in which it is not possible to determine if the chip was
really powered on (card's power reference counter is positive), operate
on the mmc_card instead of the function.
Also verify that the chip is indeed powered on before powering off, to
avoid wrong reference counter values in error cases.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
The top registers initialization is very specific to the actual
hardware used, even the way in which we read from and write to the top
registers varies from chip to chip. This patch moves all top
registers initialization to wl12xx. Also add a boot op for the wlcore
module to call at the right time and a few callbacks with the common
called to be called from the lower drivers boot operations.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Add register tables support in wlcore, add some new IO functions to
read and write to chip-specific register and data addresses. Move
some common register values from wl12xx to wlcore and add the
registers table to wl12xx.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Add partition tables to wlcore, move and reorganize partition setting
functions. Move wl12xx partition table to use the wlcore partition
table instead.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
|
Rename the wl12xx driver directory to wlcore as an initial step
towards the split of the driver into wlcore and wl12xx. We just
rename the directory first to keep git blame happy.
Signed-off-by: Luciano Coelho <coelho@ti.com>
|
