summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/acx.c
AgeCommit message (Collapse)Author
2012-04-12wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectoryLuciano Coelho
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: Luciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
2012-02-15wl12xx: Set different wake up conditions in case of suspendEyal Shapira
Added ability to set different wake up conditions for suspend/resume. Set default values to wake up every 3 DTIMs while suspended and every 1 DTIM while resumed Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: fw api change - add role_id to tsf_infoEliad Peller
The ACX_TSF_INFO command now takes role_id as param. change the struct accordingly, and pass the wlvif to the wl1271_acx_tsf_info() function. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-15wl12xx: remove deprecated packet detection threshold configLuciano Coelho
The ACX_PD_THRESHOLD configuration command is deprecated and should not be used anymore. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: move debugging definitions to a separate fileLuciano Coelho
Separate the debugging macros and other definitions to a new debug.h file. This is be needed because the sdio and spi modules don't need to depend on the wl12xx module anymore, but still need to include wl12xx.h. Currently they do depend on it, because of the debugging global that wl12xx exports. A future patch will remove this dependency. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: use dynamic rate policiesEliad Peller
allocate the rate policies dynamically, instead of using hardcoded indexes. this is needed for proper multi-role configuration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: rearm rx streaming per vifEliad Peller
Currently, the rx streaming doesn't support multi-vif (the actual wlvif is taken from wl->vif, and the management is global). Make the rx streaming timers/works per-vif, and pass the the actual vif as param. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move rssi_thold and last_rssi_event into wlvifEliad Peller
move rssi_thold and last_rssi_event into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move role_id into wlvifEliad Peller
move role_id into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move basic_rate into wlvifEliad Peller
move basic_rate into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move rate_set into wlvifEliad Peller
move rate_set into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: configure rate policy for p2p operationsEliad Peller
p2p packets should go out only with OFDM rates. Configure a new rate policy that will (later) be used during p2p_find (when the p2p_cli / p2p_go interfaces are in use, we won't have to use this policy, as the configured rates should already be OFDM-only). Additionally, update CONF_TX_MAX_RATE_CLASSES to reflect the current value from the fw api. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-14wl12xx: add config_hangover commandEliad Peller
Add wl12xx_acx_config_hangover() and respective conf values. This command configures how long the chip will stay awake after it was configured to enter psm. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: AP-mode - set STA HT capabilities when adding a STAArik Nemtsov
In addition, set global HT operation mode via ACX_HT_BSS_OPERATION when a change is detected by usermode Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: re-enable block ack session supportArik Nemtsov
Incorporate interface changes for HT support. Add ba_bitmap field to the wl1271_link struct, to indicate activate RX BA sessions (for AP mode). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: update BT coex configuration paramsEliad Peller
The BT coex params api have been changed. Update it, and init coex for both sta and ap. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: add set_rate_mgmt_params acxEliad Peller
Configure rate management parameters on hw init Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: use wl1271_acx_beacon_filter_opt for both sta and apEliad Peller
Use ACX_BEACON_FILTER_OPT for both station and ap roles (use the generic wl1271_acx_beacon_filter_opt() instead of wl1271_acx_set_ap_beacon_filter() ). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: update acx commandsEliad Peller
Update the acx commands according to the new fw api (fw >= 6/7.3.0.0.75). The main change in most of the ACXs is the addition of a new role_id/link_id field, which is required for multi-role operation. Currently, we don't really support multi-role, as most of our data (inside wl) is global. As the current fw doesn't support concurrent roles yet, keep it this way and add wl->role_id and wl->sta_hlid to save the active role/link. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: remove rx filtering stuffEliad Peller
The new fw doesn't support rx_filtering configuration (as a stand-alone command. the rx filtering is done automatically according to the active role). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-12drivers/net/wireless/wl12xx: add missing kfreeJulia Lawall
In each case, the freed data should be freed in the error handling code as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05wl12xx: always initialize AP-mode max power levelArik Nemtsov
Sometimes we only get the Tx power level via op->config when the FW is off. Record the received power level when this happens and use it to initialize the firmware during boot. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-07-05wl12xx: AP mode - support FW TX inactivity triggersArik Nemtsov
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: Support routing FW logs to the hostIdo Yariv
A recently added feature to the firmware enables the driver to retrieve firmware logs via the host bus (SDIO or SPI). There are two modes of operation: 1. On-demand: The FW collects its log in an internal ring buffer. This buffer can later be read, for example, upon recovery. 2. Continuous: The FW pushes the FW logs as special packets in the RX path. Reading the internal ring buffer does not involve the FW. Thus, as long as the HW is not in ELP, it should be possible to read the logs, even if the FW crashes. A sysfs binary file named "fwlog" was added to support this feature, letting a monitor process read the FW messages. The log is transferred from the FW only when available, so the reading process might block. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: remove unused crc7 referencesEliad Peller
crc7 is used only in wl12xx_spi. Remove redundant crc7.h includes, and update Kconfig to select CRC7 only if WL12XX_SPI is being selected. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: add support for rx streamingEliad Peller
wl12xx supports the "rx streaming" feature: When in ps mode, and @timeout msecs have been passed since the last rx/tx, it issues trigger packets (QoS-null/PS-Poll packets, according to the ac type) in const intervals (in order to reduce the rx time). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02Revert "wl12xx: support FW TX inactivity triggers"Luciano Coelho
This reverts commit 47684808fd89d6809c0886e06f8ac324252499d8. Conflicts: drivers/net/wireless/wl12xx/conf.h drivers/net/wireless/wl12xx/main.c
2011-05-02wl12xx: AP-mode - overhaul rate policy configurationArik Nemtsov
Use the minimal rate configured in the basic rates set as the AP broadcast and multicast rate. The minimal rate is used to ensure weak links can still communicate. When the basic rates contains at least one OFDM rate, configure all unicast TX rates to OFDM only. Unify rate configuration on initialization and on change notification into a single function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: AP-mode - disable beacon filtering on start upArik Nemtsov
New AP-mode FWs filter external beacons by default. Disable this filtering on start up so we can properly configure ERP protection. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: use wiphy values for setting rts, frag thresholds on initArik Nemtsov
Use the wiphy RTS and fragmentation thresholds for initializing the FW when possible. This mitigates a bug where previously set values are forgotten after interface down/up. Add checks before settings these values to ensure they are valid. Use default values when invalid thresholds are configured. Update the default RTS threshold to the maximum value given by the specification. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: add BT-coexistance for APArik Nemtsov
Initialize AP specific BT coexitance parameters to default values and enable them in AP mode. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: Modify memory configuration for 128x/APIdo Yariv
The 128x/AP firmware does not yet support dynamic memory. Temporarily, the memory configuration for the 127x was used both for 127x/AP as well as 128x/AP. Since the two chips don't have the same number of memory blocks, TP was significantly degraded. This hasn't been fine tuned yet, but using the base 128x numbers (without dynamic memory) seems to yield much better results (around 30% more). Additional fine tuning will be required in the future. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: FM WLAN coexistenceShahar Levi
Add support to FM WLAN coexistence (STA only). Some WiFi harmonics may interfere with FM operation, to avoid this problem special coexistence techniques are activated around some FM frequencies. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-28wl12xx: support FW TX inactivity triggersArik Nemtsov
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. In STA mode we register only for the MAX_TX_RETRY event. A TX failure is interpreted as a loss of connection. Support for IEEE80211_HW_REPORTS_TX_ACK_STATUS has been removed to avoid the inherent race condition of a mac80211 TX failure counter in addition to the FW counter. This patch depends on "mac80211: allow low level driver to report packet loss" Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19wl12xx: Simplify TX blocks accountingIdo Yariv
The total number of TX memory blocks may change when the dynamic memory option is enabled. The current implementation only tracks the available memory blocks, which over-complicates TX blocks accounting. By tracking the number of allocated blocks, calculation of the number of available blocks becomes simpler and cleaner. It simply equals the total number of TX memory blocks minus the allocated ones. Also, remove some unnecessary castings and use union member accesses instead. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-19wl12xx: 1281/1283 support - use dynamic memory for the RX/TX poolsShahar Levi
Separate the memory configuration to chip-specific structures and implement dynamic memory for wl128x. This feature allows us to move TX memory blocks to the RX pool when the RX path is overloaded. Thanks for Arik Nemtsov <arik@wizery.com> for helping simplify the wl1271_fw_status() code. [Rewrote the commit subject and message for clarity; improved some comments and changed "spare" to "padding" for consistency; added a FIXME for the AP memory configuration -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-19wl12xx: 1281/1283 support - Add acx commandsShahar Levi
New acx command that sets: Rx fifo enable reduced bus transactions in RX path. Tx bus transactions padding to SDIO block size that improve preference in Tx and essential for working with SDIO HS (48Mhz). The max SDIO block size is 256 when working with Tx bus transactions padding to SDIO block. Add new ops to SDIO & SPI that handles the win size change in case of transactions padding (relevant only for SDIO). [Fix endianess issues; simplify sdio-specific block_size handling; minor changes in comments; use "aligned_len" in one calculation instead of "pad" to avoid confusion -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-03wl12xx: Correctly set up protection if non-GF STAs are presentHelmut Schaa
Set the gf_protection bit when calling ACX_HT_BSS_OPERATION according to the GF bit passed by mac80211 in ht_operation_mode. [Added a proper commit message -- Luca] Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: AP-mode - fix race condition on sta connectionArik Nemtsov
If a sta starts transmitting immediately after authentication, sometimes the FW deauthenticates it. Fix this by marking the sta "in-connection" in FW before sending the autentication response. The "in-connection" entry is automatically removed when connection succeeds or after a timeout. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: always set mac_address when configuring ht capsEliad Peller
The mac_address should be set also when ht caps are disabled. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-09wl12xx: set supported_rates after associationEliad Peller
Instead of looking for supported_rates change on every tx packet, just extract the supported_rates after association completes (station only). Remove wl1271.sta_rate_set and WL1271_FLAG_STA_RATES_CHANGED which are not used anymore. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-09wl12xx: use the conf struct instead of macros for memory configurationEliad Peller
make the configuration management more flexible by using the conf struct, rather than predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-09wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-09wl12xx: mcp2.5 - add config_ps acxEliad Peller
mcp2.5 uses this acx to configure the fw only once, rather than passing the params in every enter psm command. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-01-24wl12xx: BA receiver supportLevi, Shahar
Add new ampdu_action ops to support receiver BA. The BA initiator session management in FW independently. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-01-24wl12xx: BA initiator supportLevi, Shahar
Add 80211n BA initiator session support wl1271 driver. Include BA supported FW version auto detection mechanism. BA initiator session management included in FW independently. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-01-24wl12xx: fix some endianess bugsEliad Peller
pointed out by sparse warnings: CHECK drivers/net/wireless/wl12xx/cmd.c drivers/net/wireless/wl12xx/cmd.c:987:20: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/cmd.c:987:20: expected restricted __le16 [usertype] aging_period drivers/net/wireless/wl12xx/cmd.c:987:20: got int CHECK drivers/net/wireless/wl12xx/tx.c drivers/net/wireless/wl12xx/tx.c:197:2: warning: cast from restricted __le16 drivers/net/wireless/wl12xx/tx.c:197:2: warning: cast from restricted __le16 drivers/net/wireless/wl12xx/tx.c:197:2: warning: cast from restricted __le16 CHECK drivers/net/wireless/wl12xx/acx.c drivers/net/wireless/wl12xx/acx.c:816:23: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/acx.c:816:23: expected restricted __le32 [usertype] rate_policy_idx drivers/net/wireless/wl12xx/acx.c:816:23: got unsigned char [unsigned] [usertype] idx Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-01-24wl12xx: AP mode - AP specific CMD_CONFIGURE sub-commandsArik Nemtsov
Add AP max retries and rate policy configuration. Rename STA rate policy configuration function. Signed-off-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-01-24wl12xx: Add AP related configuration to conf_drv_settingsArik Nemtsov
Rate class configuration has been split up for AP and STA modes. Template related configuration likewise separated. Signed-off-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit v0.10.2 at 2024-11-14 14:09:04 (GMT)