summaryrefslogtreecommitdiff
path: root/drivers/nfc/st21nfcb
AgeCommit message (Collapse)Author
2014-12-02NFC: st21nfcb: Fix reported errorChristophe Ricard
Report error returned by devm_gpio_request_one instead of -ENODEV. Reported-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Remove useless pr_infoChristophe Ricard
- pr_info in st21nfcb_nci_i2c_disable is not necessary Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Improve ndlc commentChristophe Ricard
In ndlc_probe function we initialize timers. They are not started. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-01NFC: st21nfcb: Remove gpio_irq field in static and dts configurationChristophe Ricard
- phy->gpio_irq is never done out of the request resources. - irq_of_parse_and_map is already done in the i2c core so client->irq is already set when entering in st21nfcb_hci_i2c_of_request_resources - In case of static platform configuration client->irq can be set directly. - It simplifies the code a bit. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-01NFC: st21nfcb: Add of_st21nfcb_i2c_match to MODULE_DEVICE_TABLEChristophe Ricard
When CONFIG_OF is define add of_st21nfcb_i2c_match to MODULE_DEVICE_TABLE Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-10-06Merge tag 'master-2014-10-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-10-03 Please pull tihs batch of updates intended for the 3.18 stream! For the iwlwifi bits, Emmanuel says: "I have here a few things that depend on the latest mac80211's changes: RRM, TPC, Quiet Period etc... Eyal keeps improving our rate control and we have a new device ID. This last patch should probably have gone to wireless.git, but at that stage, I preferred to send it to -next and CC stable." For (most of) the Atheros bits, Kalle says: "The only new feature is testmode support from me. Ben added a new method to crash the firmware with an assert for debug purposes. As usual, we have lots of smaller fixes from Michal. Matteo fixed a Kconfig dependency with debugfs. I fixed some warnings recently added to checkpatch." For the NFC bits, Samuel says: "We've had major updates for TI and ST Microelectronics drivers, and a few NCI related changes. For TI's trf7970a driver: - Target mode support for trf7970a - Suspend/resume support for trf7970a - DT properties additions to handle different quirks - A bunch of fixes for smartphone IOP related issues For ST Microelectronics' ST21NFCA and ST21NFCB drivers: - ISO15693 support for st21nfcb - checkpatch and sparse related warning fixes - Code cleanups and a few minor fixes Finally, Marvell added ISO15693 support to the NCI stack, together with a couple of NCI fixes." For the Bluetooth bits, Johan says: "This 3.18 pull request replaces the one I did on Monday ("bluetooth-next 2014-09-22", which hasn't been pulled yet). The additions since the last request are: - SCO connection fix for devices not supporting eSCO - Cleanups regarding the SCO establishment logic - Remove unnecessary return value from logging functions - Header compression fix for 6lowpan - Cleanups to the ieee802154/mrf24j40 driver Here's a copy from previous request that this one replaces: ' Here are some more patches for 3.18. They include various fixes to the btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring). I've held on to this pull request a bit since we were waiting for a SCO related fix to get sorted out first. However, since the merge window is getting closer I decided not to wait for it. If we do get the fix sorted out there'll probably be a second small pull request later this week. '" And, "Unless 3.17 gets delayed this will probably be our last -next pull request for 3.18. We've got: - New Marvell hardware supportr - Multicast support for 6lowpan - Several of 6lowpan fixes & cleanups - Fix for a (false-positive) lockdep warning in L2CAP - Minor btusb cleanup" On top of all that comes the usual sort of updates to ath5k, ath9k, ath10k, brcmfmac, mwifiex, and wil6210. This time around there are also a number of rtlwifi updates to enable some new hardware and to reconcile the in-kernel drivers with some newer releases of the Realtek vendor drivers. Also of note is some device tree work for the bcma bus. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-24NFC: st21nfcb: remove error outputChristophe Ricard
In case we are not able to read out the NDLC/NCI header, we do not consider this as an issue and we will give a later chance. The NDLC layer will handle errors thanks to its internal timers. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-24NFC: st21nfcb: Add ISO15693 Reader/Writer supportChristophe Ricard
Add support for ISO/IEC 15693 RF technology and Type 5 tags. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-24NFC: nci: Add support for proprietary RF ProtocolsChristophe Ricard
In NFC Forum NCI specification, some RF Protocol values are reserved for proprietary use (from 0x80 to 0xfe). Some CLF vendor may need to use one value within this range for specific technology. Furthermore, some CLF may not becompliant with NFC Froum NCI specification 2.0 and therefore will not support RF Protocol value 0x06 for PROTOCOL_T5T as mention in a draft specification and in a recent push. Adding get_rf_protocol handle to the nci_ops structure will help to set the correct technology to target. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-24NFC: st21nfcb: Fix improper ndlc T2 managementChristophe Ricard
T2 was never started when sending a command. Start it when sending a command for the first attempt and stop it once we receive the answer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-24NFC: st21nfcb: Fix improper management of -EREMOTEIO error code.Christophe Ricard
On st21nfcb the irq line might be kept to active state because of other interfaces activity. This may generate i2c read tentative resulting in i2c NACK. This fix will currently let NDLC upper layer to decide when it is relevent to signal to the physical layer when the chip as muted. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Remove useless headersChristophe Ricard
Remove some headers as they are: - not relevent for st21nfcb. - called multiple times for no reason: example st21nfcb.h already include ndlc.h. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Fix logic when running into i2c read retryChristophe Ricard
When retrying to read the NCI header, the CLF might not be available the first time. However it may not be successful the second time and this may cause an error in the function. Enforce the retrieve data length is as expected. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Remove inappropriate kfree on a previously devm_kzalloc pointerChristophe Ricard
In case of an error during driver probe, info pointer was freed with kfree. No need to free anything when using devm_kzalloc. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Remove useless new line in nfc_err callChristophe Ricard
Remove a uselss new line in nfc_err call. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Remove double assignment of .owner in struct device_driverChristophe Ricard
The .owner member of struct device_driver is assigned THIS_MODULE twice. Introduced by: commit 35630df68d6030daf12dde12ed07bbe26324e6ac NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Convert to use devm_gpio_request_oneChristophe Ricard
Simplify the code a bit as mention by Axel Lin in a previous patch for st21nfca. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Fix scripts/checkpatch.pl error "code indent should use tabs ↵Christophe Ricard
where possible" Fixing scripts/checkpatch.pl error "code indent should use tabs where possible" in: - i2c.c in st21nfcb_nci_irq_thread_fn function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfcb: Fix depmod dependency cycleChristophe Ricard
This fix issue reported here: https://lists.01.org/pipermail/linux-nfc/2014-September/002871.html depmod: WARNING: found 6 modules in dependency cycles! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/drivers/nfc/st21nfcb/st21nfcb.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/drivers/nfc/st21nfcb/ndlc.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/rfkill/rfkill.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/nfc/nfc.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/nfc/nci/nci.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/lib/crc-ccitt.ko in dependency cycle! ./scripts/depmod.sh: line 57: 23387 Segmentation fault (core dumped) "$DEPMOD" "$@" "$KERNELRELEASE" $SYMBOL_PREFIX make: *** [_modinst_post] Error 139 Reported-by: Daniel Wagner <wagi@monom.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-22NFC: st21nfcb: few code clean upChristophe Ricard
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-22NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chipChristophe Ricard
Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v0.10.2 at 2024-11-10 01:42:57 (GMT)