summaryrefslogtreecommitdiff
path: root/drivers/nvdimm
AgeCommit message (Collapse)Author
2016-08-08nvdimm, btt: add a size attribute for BTTsVishal Verma
To be consistent with other namespaces, expose a 'size' attribute for BTT devices also. Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block/mm: make bdev_ops->rw_page() take a bool for read/writeJens Axboe
Commit abf545484d31 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04mm/block: convert rw_page users to bio op useMike Christie
The rw_page users were not converted to use bio/req ops. As a result bdev_write_page is not passing down REQ_OP_WRITE and the IOs will be sent down as reads. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixes: 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code") Modified by me to: 1) Drop op_flags passing into ->rw_page(), as we don't use it. 2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-29Merge tag 'libnvdimm-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-24Merge branch 'for-4.8/libnvdimm' into libnvdimm-for-nextDan Williams
2016-07-24libnvdimm-btt: Delete an unnecessary check before the function call ↵Markus Elfring
"__nd_device_register" The __nd_device_register() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24nfit, libnvdimm: allow an ARS scrub to be triggered on demandVishal Verma
Normally, an ARS (Address Range Scrub) only happens at boot/initialization time. There can however arise situations where a bus-wide rescan is needed - notably, in the case of discovering a latent media error, we should do a full rescan to figure out what other sectors are bad, and thus potentially avoid triggering an mce on them in the future. Also provide a sysfs trigger to start a bus-wide scrub. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23libnvdimm: register nvdimm_bus devices with an nd_bus driverDan Williams
A recent effort to add a new nvdimm bus provider attribute highlighted a race between interrogating nvdimm_bus->nd_desc and nvdimm_bus tear down. The typical way to handle these races is to take the device_lock() in the attribute method and validate that the device is still active. In order for a device to be 'active' it needs to be associated with a driver. So, we create the small boilerplate for a driver and register nvdimm_bus devices on the 'nvdimm_bus_type' bus. A result of this change is that ndbusX devices now appear under /sys/bus/nd/devices. In fact this makes /sys/class/nd somewhat redundant, but removing that will need to take a long deprecation period given its use by ndctl binaries in the field. This change naturally pulls code from drivers/nvdimm/core.c to drivers/nvdimm/bus.c, so it is a nice code organization clean-up as well. Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23pmem: clarify a debug print in pmem_clear_poisonVishal Verma
Prefix the sector number being cleared with a '0x' to make it clear that this is a hex value. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-22libnvdimm: move ->module to struct nvdimm_bus_descriptorDan Williams
Let the provider module be explicitly passed in rather than implicitly assumed by the module that calls nvdimm_bus_register(). This is in preparation for unifying the nfit and nfit_test driver teardown paths. Reviewed-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21block: add QUEUE_FLAG_DAX for devices to advertise their DAX supportToshi Kani
Currently, presence of direct_access() in block_device_operations indicates support of DAX on its block device. Because block_device_operations is instantiated with 'const', this DAX capablity may not be enabled conditinally. In preparation for supporting DAX to device-mapper devices, add QUEUE_FLAG_DAX to request_queue flags to advertise their DAX support. This will allow to set the DAX capability based on how mapped device is composed. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <linux-s390@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-13pmem: kill __pmem address spaceDan Williams
The __pmem address space was meant to annotate codepaths that touch persistent memory and need to coordinate a call to wmb_pmem(). Now that wmb_pmem() is gone, there is little need to keep this annotation. Cc: Christoph Hellwig <hch@lst.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-12libnvdimm, pmem: use nvdimm_flush() for namespace I/O writesDan Williams
nsio_rw_bytes() is used to write info block metadata to the namespace, so it should trigger a flush after every write. Replace wmb_pmem() with nvdimm_flush() in this path. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-12libnvdimm, pmem: flush posted-write queues on shutdownDan Williams
Commit writes to media on system shutdown or pmem driver unload. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, pmem: use REQ_FUA, REQ_FLUSH for nvdimm_flush()Dan Williams
Given that nvdimm_flush() has higher overhead than wmb_pmem() (pointer chasing through nd_region), and that we otherwise assume a platform has ADR capability when flush hints are not present, move nvdimm_flush() to REQ_FLUSH context. Note that we still arrange for nvdimm_flush() to be called even in the ADR case. We need at least once wmb() fence to push buffered writes in the cpu out to the ADR protected domain. Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm: cycle flush hintsDan Williams
When the NFIT provides multiple flush hint addresses per-dimm it is expressing that the platform is capable of processing multiple flush requests in parallel. There is some fixed cost per flush request, let the cost be shared in parallel on multiple cpus. Since there may not be enough flush hint addresses for each cpu to have one, keep a per-cpu index of the last used hint, hash it with current pid, and assume that access pattern and scheduler randomness will keep the flush-hint usage somewhat staggered across cpus. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm: introduce nvdimm_flush() and nvdimm_has_flush()Dan Williams
nvdimm_flush() is a replacement for the x86 'pcommit' instruction. It is an optional write flushing mechanism that an nvdimm bus can provide for the pmem driver to consume. In the case of the NFIT nvdimm-bus-provider nvdimm_flush() is implemented as a series of flush-hint-address [1] writes to each dimm in the interleave set (region) that backs the namespace. The nvdimm_has_flush() routine relies on platform firmware to describe the flushing capabilities of a platform. It uses the heuristic of whether an nvdimm bus provider provides flush address data to return a ternary result: 1: flush addresses defined 0: dimm topology described without flush addresses (assume ADR) -errno: no topology information, unable to determine flush mechanism The pmem driver is expected to take the following actions on this ternary result: 1: nvdimm_flush() in response to REQ_FUA / REQ_FLUSH and shutdown 0: do not set, WC or FUA on the queue, take no further action -errno: warn and then operate as if nvdimm_has_flush() returned '0' The caveat of this heuristic is that it can not distinguish the "dimm does not have flush address" case from the "platform firmware is broken and failed to describe a flush address". Given we are already explicitly trusting the NFIT there's not much more we can do beyond blacklisting broken firmwares if they are ever encountered. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm: keep region data alive over namespace removalDan Williams
nd_region device driver data will be used in the namespace i/o path. Re-order nd_region_remove() to ensure this data stays live across namespace device removal Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, nfit: move flush hint mapping to region-device driver-dataDan Williams
In preparation for triggering flushes of a DIMM's writes-posted-queue (WPQ) via the pmem driver move mapping of flush hint addresses to the region driver. Since this uses devm_nvdimm_memremap() the flush addresses will remain mapped while any region to which the dimm belongs is active. We need to communicate more information to the nvdimm core to facilitate this mapping, namely each dimm object now carries an array of flush hint address resources. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, nfit: remove nfit_spa_map() infrastructureDan Williams
Now that all shared mappings are handled by devm_nvdimm_memremap() we no longer need nfit_spa_map() nor do we need to trigger a callback to the bus provider at region disable time. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-08libnvdimm: introduce devm_nvdimm_memremap(), convert nfit_spa_map() usersDan Williams
In preparation for generically mapping flush hint addresses for both the BLK and PMEM use case, provide a generic / reference counted mapping api. Given the fact that a dimm may belong to multiple regions (PMEM and BLK), the flush hint addresses need to be held valid as long as any region associated with the dimm is active. This is similar to the existing BLK-region case where multiple BLK-regions may share an aperture mapping. Up-level this shared / reference-counted mapping capability from the nfit driver to a core nvdimm capability. This eliminates the need for the nd_blk_region.disable() callback. Note that the removal of nfit_spa_map() and related infrastructure is deferred to a later patch. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-06libnvdimm: initialize struct blk_integrity with 0Johannes Thumshirn
Initialize struct blk_integrity with 0 as blk_integrity_register() takes the then unitialized struct blk_integrity::flags and ORs it to the resulting block integrity structure. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27block: remove ->driverfs_devDan Williams
Now that all drivers that specify a ->driverfs_dev have been converted to device_add_disk(), the pointer can be removed from struct gendisk. Cc: Jens Axboe <axboe@fb.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27block: convert to device_add_disk()Dan Williams
For block drivers that specify a parent device, convert them to use device_add_disk(). This conversion was done with the following semantic patch: @@ struct gendisk *disk; expression E; @@ - disk->driverfs_dev = E; ... - add_disk(disk); + device_add_disk(E, disk); @@ struct gendisk *disk; expression E1, E2; @@ - disk->driverfs_dev = E1; ... E2 = disk; ... - add_disk(E2); + device_add_disk(E1, E2); ...plus some manual fixups for a few missed conversions. Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-24libnvdimm, pmem: allow nfit_test to override pmem_direct_access()Dan Williams
Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to override it and indicate that nfit_test-pmem is not device-mapped. Now, we want to enable nfit_test to operate without DMA_CMA and the pmem it provides will no longer be physically contiguous, i.e. won't be capable of supporting direct_access requests larger than a page. Make pmem_direct_access() a weak symbol so that it can be replaced by the tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static inline now that it no longer needs to be overridden. Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-24libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignmentDan Williams
The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: <stable@vger.kernel.org> Cc: Micah Parrish <micah.parrish@hpe.com> Cc: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-17libnvdimm: IS_ERR() usage cleanupDan Williams
Prompted by commit 287980e49ffc "remove lots of IS_ERR_VALUE abuses", I ran make coccicheck against drivers/nvdimm/ and found that: if (IS_ERR(x)) return PTR_ERR(x); return 0; ...can be replaced with PTR_ERR_OR_ZERO(). Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-15libnvdimm: use devm_add_action_or_reset()Dan Williams
Clean up needless calls to the action routine by letting devm_add_action_or_reset() call it automatically. This does cause the disk to registered and immediately unregistered when a memory allocation fails, but the block layer should be prepared for such an event. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-27Merge tag 'dax-misc-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull misc DAX updates from Vishal Verma: "DAX error handling for 4.7 - Until now, dax has been disabled if media errors were found on any device. This enables the use of DAX in the presence of these errors by making all sector-aligned zeroing go through the driver. - The driver (already) has the ability to clear errors on writes that are sent through the block layer using 'DSMs' defined in ACPI 6.1. Other misc changes: - When mounting DAX filesystems, check to make sure the partition is page aligned. This is a requirement for DAX, and previously, we allowed such unaligned mounts to succeed, but subsequent reads/writes would fail. - Misc/cleanup fixes from Jan that remove unused code from DAX related to zeroing, writeback, and some size checks" * tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix a comment in dax_zero_page_range and dax_truncate_page dax: for truncate/hole-punch, do zeroing through the driver if possible dax: export a low-level __dax_zero_page_range helper dax: use sb_issue_zerout instead of calling dax_clear_sectors dax: enable dax in the presence of known media errors (badblocks) dax: fallback from pmd to pte on error block: Update blkdev_dax_capable() for consistency xfs: Add alignment check for DAX mount ext2: Add alignment check for DAX mount ext4: Add alignment check for DAX mount block: Add bdev_dax_supported() for dax mount checks block: Add vfs_msg() interface dax: Remove redundant inode size checks dax: Remove pointless writeback from dax_do_io() dax: Remove zeroing from dax_io() dax: Remove dead zeroing code from fault handlers ext2: Avoid DAX zeroing to corrupt data ext2: Fix block zeroing in ext2_get_blocks() for DAX dax: Remove complete_unwritten argument DAX: move RADIX_DAX_ definitions to dax.c
2016-05-21Merge branch 'for-4.7/dax' into libnvdimm-for-nextDan Williams
2016-05-21libnvdimm, dax: fix deletionDan Williams
The ndctl unit tests discovered that the dax enabling omitted updates to nd_detach_and_reset(). This routine clears device the configuration when the namespace is detached. Without this clearing userspace may assume that the device is in the process of being configured by another agent in the system. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21libnvdimm, dax: fix alignment validationDan Williams
Testing the dax-device autodetect support revealed a probe failure with the following result: dax0.1: bad offset: 0x8200000 dax disabled The original pfn-device implementation inferred the alignment from ilog2(offset), now that the alignment is explicit the is_power_of_2() needs replacing with a real sanity check against the recorded alignment. Otherwise the alignment check is useless in the implicit case and only the minimum size of the offset matters. This self-consistency check is further validated by the probe path that will re-check that the offset is large enough to contain all the metadata required to enable the device. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21libnvdimm, dax: autodetect supportDan Williams
For autodetecting a previously established dax configuration we need the info block to indicate block-device vs device-dax mode, and we need to have the default namespace probe hand-off the configuration to the dax_pmem driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21libnvdimm: release ida resourcesDan Williams
ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-18dax: enable dax in the presence of known media errors (badblocks)Dan Williams
1/ If a mapping overlaps a bad sector fail the request. 2/ Do not opportunistically report more dax-capable capacity than is requested when errors present. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> [vishal: fix a conflict with system RAM collision patches] [vishal: add a 'size' parameter to ->direct_access] [vishal: fix a conflict with DAX alignment check patches] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-18Merge branch 'for-4.7/dsm' into libnvdimm-for-nextDan Williams
2016-05-18Merge branch 'for-4.7/libnvdimm' into libnvdimm-for-nextDan Williams
2016-05-18Merge branch 'for-4.7/dax' into libnvdimm-for-nextDan Williams
2016-05-18libnvdimm: stop requiring a driver ->remove() methodDan Williams
The dax_pmem driver was implementing an empty ->remove() method to satisfy the nvdimm bus driver that unconditionally calls ->remove(). Teach the core bus driver to check if ->remove() is NULL to remove that requirement. Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-09libnvdimm, dax: record the specified alignment of a dax-device instanceDan Williams
We want to use the alignment as the allocation and mapping unit. Previously this information was only useful for establishing the data offset, but now it is important to remember the granularity for the later use. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-09libnvdimm, dax: reserve space to store labels for device-daxDan Williams
We may want to subdivide a device-dax range into multiple devices so that each can have separate permissions or naming. Reserve 128K of label space by default so we have the capability of making allocation decisions persistent. This reservation is not something we can add later since it would result in the default size of a device-dax range changing between kernel versions. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-09libnvdimm, dax: introduce device-dax infrastructureDan Williams
Device DAX is the device-centric analogue of Filesystem DAX (CONFIG_FS_DAX). It allows persistent memory ranges to be allocated and mapped without need of an intervening file system. This initial infrastructure arranges for a libnvdimm pfn-device to be represented as a different device-type so that it can be attached to a driver other than the pmem driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-06libnvdimm, pfn: fix ARCH=alpha allmodconfig build failureDan Williams
I had relied on the kbuild robot for cross build coverage, however it only builds alpha_defconfig. Switch from HPAGE_SIZE to PMD_SIZE, which is more widely defined. Fixes: 658922e57b84 ("libnvdimm, pfn: fix memmap reservation sizing") Cc: <stable@vger.kernel.org> Reported-by: Guenter Roeck <guenter@roeck-us.net> Tested-by: Guenter Roeck <guenter@roeck-us.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-30libnvdimm, pfn: fix memmap reservation sizingDan Williams
When configuring a pfn-device instance to allocate the memmap array it needs to account for the fact that vmemmap_populate_hugepages() allocates struct page blocks in HPAGE_SIZE chunks. We need to align the reserved area size to 2MB otherwise arch_add_memory() runs out of memory while establishing the memmap: WARNING: CPU: 0 PID: 496 at arch/x86/mm/init_64.c:704 arch_add_memory+0xe7/0xf0 [..] Call Trace: [<ffffffff8148bdb3>] dump_stack+0x85/0xc2 [<ffffffff810a749b>] __warn+0xcb/0xf0 [<ffffffff810a75cd>] warn_slowpath_null+0x1d/0x20 [<ffffffff8106a497>] arch_add_memory+0xe7/0xf0 [<ffffffff811d2097>] devm_memremap_pages+0x287/0x450 [<ffffffff811d1ffa>] ? devm_memremap_pages+0x1ea/0x450 [<ffffffffa0000298>] __wrap_devm_memremap_pages+0x58/0x70 [nfit_test_iomap] [<ffffffffa0047a58>] pmem_attach_disk+0x318/0x420 [nd_pmem] [<ffffffffa0047bcf>] nd_pmem_probe+0x6f/0x90 [nd_pmem] [<ffffffffa0009469>] nvdimm_bus_probe+0x69/0x110 [libnvdimm] [..] ndbus0: nd_pmem.probe(pfn3.0) = -12 nd_pmem: probe of pfn3.0 failed with error -12 libndctl: ndctl_pfn_enable: pfn3.0: failed to enable Reported-by: Namratha Kothapalli <namratha.n.kothapalli@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-28nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanismDan Williams
There are currently 4 known similar but incompatible definitions of the command sets that can be sent to an NVDIMM through ACPI. It is also clear that future platform generations (ACPI or not) will continue to revise and extend the DIMM command set as new devices and use cases arrive. It is obviously untenable to continue to proliferate divergence of these command definitions, and to that end a standardization process has begun to provide for a unified specification. However, that leaves a problem about what to do with this first generation where vendors are already shipping divergence. The Linux kernel can support these initial diverged platforms without giving platform-firmware free reign to continue to diverge and compound kernel maintenance overhead. The kernel implementation can encourage standardization in two ways: 1/ Require that any function code that userspace wants to send be explicitly white-listed in the implementation. For ACPI this means function codes marked as supported by acpi_check_dsm() may only be invoked if they appear in the white-list. A function must be publicly documented before it is added to the white-list. 2/ The above restrictions can be trivially bypassed by using the "vendor-specific" payload command. However, since vendor-specific commands are by definition not publicly documented and have the potential to corrupt the kernel's view of the dimm state, we provide a toggle to disable vendor-specific operations. Enabling undefined behavior is a policy decision that can be made by the platform owner and encourages firmware implementations to choose public over private command implementations. Based on an initial patch from Jerry Hoemann Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-28nfit, libnvdimm: clarify "commands" vs "_DSMs"Dan Williams
Clarify the distinction between "commands", the ioctls userspace calls to request the kernel take some action on a given dimm device, and "_DSMs", the actual function numbers used in the firmware interface to the DIMM. _DSMs are ACPI specific whereas commands are Linux kernel generic. This is in preparation for breaking the 1:1 implicit relationship between the kernel ioctl number space and the firmware specific function numbers. Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-22libnvdimm: cleanup nvdimm_namespace_common_probe(), kill 'host'Dan Williams
The 'host' variable can be killed as it is always the same as the passed in device. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>