summaryrefslogtreecommitdiff
path: root/drivers/of
AgeCommit message (Collapse)Author
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-20Merge tag 'devicetree-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Rewrite of the unflattening code to avoid recursion and lessen the stack usage. - Rewrite of the phandle args parsing code to get rid of the fixed args size. This is needed for IOMMU code. - Sync to latest dtc which adds more dts style checking. These warnings are enabled with "W=1" compiles. - Tegra documentation updates related to the above warnings. - A bunch of spelling and other doc fixes. - Various vendor prefix additions. * tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits) devicetree: Add Creative Technology vendor id gpio: dt-bindings: add ibm,ppc4xx-gpio binding of/unittest: Remove unnecessary module.h header inclusion drivers/of: Fix build warning in populate_node() drivers/of: Fix depth when unflattening devicetree of: dynamic: changeset prop-update revert fix drivers/of: Export of_detach_node() drivers/of: Return allocated memory from of_fdt_unflatten_tree() drivers/of: Specify parent node in of_fdt_unflatten_tree() drivers/of: Rename unflatten_dt_node() drivers/of: Avoid recursively calling unflatten_dt_node() drivers/of: Split unflatten_dt_node() of: include errno.h in of_graph.h of: document refcount incrementation of of_get_cpu_node() Documentation: dt: soc: fix spelling mistakes Documentation: dt: power: fix spelling mistake Documentation: dt: pinctrl: fix spelling mistake Documentation: dt: opp: fix spelling mistake Documentation: dt: net: fix spelling mistakes Documentation: dt: mtd: fix spelling mistake ...
2016-05-20Merge tag 'powerpc-4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V - Live patching support for ppc64le (also merged via livepatching.git) Various cleanups & minor fixes from: - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin Rothberg, Vipin K Parashar. General: - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot - Fix branching to OOL handlers in relocatable kernel from Hari Bathini - Add support for userspace Power9 copy/paste from Chris Smart - Always use STRICT_MM_TYPECHECKS from Michael Ellerman - Add mask of possible MMU features from Michael Ellerman PCI: - Enable pass through of NVLink to guests from Alexey Kardashevskiy - Cleanups in preparation for powernv PCI hotplug from Gavin Shan - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G Piccoli - Remove the dependency on EEH struct in DDW mechanism from Guilherme G Piccoli selftests: - Test cp_abort during context switch from Chris Smart - Add several tests for transactional memory support from Rashmica Gupta perf: - Add support for sampling interrupt register state from Anju T - Add support for unwinding perf-stackdump from Chandan Kumar cxl: - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud - Allow initialization on timebase sync failures from Frederic Barrat - Increase timeout for detection of AFU mmio hang from Frederic Barrat - Handle num_of_processes larger than can fit in the SPA from Ian Munsie - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie - Check periodically the coherent platform function's state from Christophe Lombard Freescale: - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum workaround, and a kconfig dependency fix." * tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits) powerpc/86xx: Fix PCI interrupt map definition powerpc/86xx: Move pci1 definition to the include file powerpc/fsl: Fix build of the dtb embedded kernel images powerpc/fsl: Fix rcpm compatible string powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC powerpc/fsl-pci: Add a workaround for PCI 5 errata powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb powerpc/powernv/npu: Add PE to PHB's list powerpc/powernv: Fix insufficient memory allocation powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner() powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover() powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover() powerpc/eeh: Don't report error in eeh_pe_reset_and_recover() Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()" powerpc/powernv/npu: Enable NVLink pass through powerpc/powernv/npu: Rework TCE Kill handling powerpc/powernv/npu: Add set/unset window helpers powerpc/powernv/ioda2: Export debug helper pe_level_printk() ...
2016-05-20Merge branch 'i2c/for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - Peter Rosin did some major rework on the locking of i2c muxes by seperating parent-locked muxes and mux-locked muxes. This avoids deadlocks/workarounds when the mux itself needs i2c commands for muxing. And as a side-effect, other workarounds in the media layer could be eliminated. Also, Peter stepped up as the i2c mux maintainer and will keep an eye on these changes. - major updates to the octeon driver - add a helper to the core to generate the address+rw_bit octal and make drivers use it - quite a bunch of driver updates * 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (84 commits) i2c: rcar: add DMA support i2c: st: Implement bus clear i2c: only check scl functions when using generic recovery i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static i2c: tegra: disable clock before returning error [media] rtl2832: regmap is aware of lockdep, drop local locking hack [media] rtl2832_sdr: get rid of empty regmap wrappers [media] rtl2832: change the i2c gate to be mux-locked [media] si2168: change the i2c gate to be mux-locked iio: imu: inv_mpu6050: change the i2c gate to be mux-locked i2c: mux: document i2c muxes and elaborate on parent-/mux-locked muxes i2c: mux: relax locking of the top i2c adapter during mux-locked muxing i2c: muxes always lock the parent adapter i2c: allow adapter drivers to override the adapter locking i2c: uniphier: add "\n" at the end of error log i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals i2c: mv64xxx: use clk_{prepare_enable,disable_unprepare} i2c: mv64xxx: handle probe deferral for the clock i2c: mv64xxx: enable the driver on ARCH_MVEBU i2c: octeon: Add workaround for broken irqs on CN3860 ...
2016-05-20Merge tag 'iommu-updates-v4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The updates include: - rate limiting for the VT-d fault handler - remove statistics code from the AMD IOMMU driver. It is unused and should be replaced by something more generic if needed - per-domain pagesize-bitmaps in IOMMU core code to support systems with different types of IOMMUs - support for ACPI devices in the AMD IOMMU driver - 4GB mode support for Mediatek IOMMU driver - ARM-SMMU updates from Will Deacon: - support for 64k pages with SMMUv1 implementations (e.g MMU-401) - remove open-coded 64-bit MMIO accessors - initial support for 16-bit VMIDs, as supported by some ThunderX SMMU implementations - a couple of errata workarounds for silicon in the field - various fixes here and there" * tag 'iommu-updates-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (44 commits) iommu/arm-smmu: Use per-domain page sizes. iommu/amd: Remove statistics code iommu/dma: Finish optimising higher-order allocations iommu: Allow selecting page sizes per domain iommu: of: enforce const-ness of struct iommu_ops iommu: remove unused priv field from struct iommu_ops iommu/dma: Implement scatterlist segment merging iommu/arm-smmu: Clear cache lock bit of ACR iommu/arm-smmu: Support SMMUv1 64KB supplement iommu/arm-smmu: Decouple context format from kernel config iommu/arm-smmu: Tidy up 64-bit/atomic I/O accesses io-64-nonatomic: Add relaxed accessor variants iommu/arm-smmu: Work around MMU-500 prefetch errata iommu/arm-smmu: Convert ThunderX workaround to new method iommu/arm-smmu: Differentiate specific implementations iommu/arm-smmu: Workaround for ThunderX erratum #27704 iommu/arm-smmu: Add support for 16 bit VMID iommu/amd: Move get_device_id() and friends to beginning of file iommu/amd: Don't use IS_ERR_VALUE to check integer values iommu/amd: Signedness bug in acpihid_device_group() ...
2016-05-19Merge tag 'pci-v4.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger) - Provide common functions for ECAM mapping (Jayachandran C) - Allow all PCIe services on non-ACPI host bridges (Jon Derrick) - Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick) - Widen portdrv service type from 4 bits to 8 bits (Keith Busch) - Add Downstream Port Containment portdrv service type (Keith Busch) - Add Downstream Port Containment driver (Keith Busch) Resource management: - Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson) - Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas) - alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas) - Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava) - Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava) - Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki) PCI device hotplug: - acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter) - Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner) Virtualization: - Mark Intel i40e NIC INTx masking as broken (Alex Williamson) - Reverse standard ACS vs device-specific ACS enabling (Alex Williamson) - Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson) IOMMU: - Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas) - Move informational printk to pci_add_dma_alias() (Bjorn Helgaas) - Add support for multiple DMA aliases (Jacek Lawrynowicz) - Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz) Thunderbolt: - Fix double free of drom buffer (Andreas Noever) - Add Intel Thunderbolt device IDs (Lukas Wunner) - Fix typos and magic number (Lukas Wunner) - Support 1st gen Light Ridge controller (Lukas Wunner) Generic host bridge driver: - Use generic ECAM API (Jayachandran C) Cavium ThunderX host bridge driver: - Don't clobber read-only bits in bridge config registers (David Daney) - Use generic ECAM API (Jayachandran C) Freescale i.MX6 host bridge driver: - Use enum instead of bool for variant indicator (Andrey Smirnov) - Implement reset sequence for i.MX6+ (Andrey Smirnov) - Factor out ref clock enable (Bjorn Helgaas) - Add initial imx6sx support (Christoph Fritz) - Add reset-gpio-active-high boolean property to DT (Petr Štetiar) - Add DT property for link gen, default to Gen1 (Tim Harvey) - dts: Specify imx6qp version of PCIe core (Andrey Smirnov) - dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar) Marvell Armada host bridge driver: - add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni) - Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni) Marvell MVEBU host bridge driver: - Constify mvebu_pcie_pm_ops structure (Jisheng Zhang) - Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang) Microsoft Hyper-V host bridge driver: - Report resources release after stopping the bus (Vitaly Kuznetsov) - Add explicit barriers to config space access (Vitaly Kuznetsov) Renesas R-Car host bridge driver: - Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) Synopsys DesignWare host bridge driver: - Remove incorrect RC memory base/limit configuration (Gabriele Paoloni) - Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang) TI Keystone host bridge driver: - Add error IRQ handler (Murali Karicheri) - Remove unnecessary goto statement (Murali Karicheri) Miscellaneous: - Fix spelling errors (Colin Ian King)" * tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping PCI: hv: Add explicit barriers to config space access PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit PCI: Add Downstream Port Containment driver PCI: Add Downstream Port Containment portdrv service type PCI: Widen portdrv service type from 4 bits to 8 bits PCI: designware: Remove incorrect RC memory base/limit configuration PCI: hv: Report resources release after stopping the bus ARM: dts: imx6qp: Specify imx6qp version of PCIe core PCI: imx6: Implement reset sequence for i.MX6+ PCI: imx6: Use enum instead of bool for variant indicator PCI: thunder: Don't clobber read-only bits in bridge config registers thunderbolt: Fix double free of drom buffer PCI: rcar: Select PCI_MSI_IRQ_DOMAIN PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller ...
2016-05-19of/unittest: Remove unnecessary module.h header inclusionJavier Martinez Canillas
The OF_UNITTEST Kconfig symbol is bool so this unittest can only be built-in and not build as a module. Also, nothing defined in this header file used so is not necessary to include it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-19drivers/of: Fix build warning in populate_node()Gavin Shan
Function populate_node() is used to unflatten FDT blob to device tree. It supports maximal 64 level of device nodes. There is one array @fpsizes[64] tracking the full name length of last unflattened device node in the corresponding level (index of element in the array - 1). Build warning is seen with CONFIG_FRAME_WARN=1024 like below on ARM64 as Geert reported. The issue can be reproduced on PPC64 as well. $ make drivers/of/fdt.o drivers/of/fdt.c:443:1: warning: the frame size of 1136 bytes is \ larger than 1024 bytes [-Wframe-larger-than=] This changes the data type of @fpsizes[i] from "unsigned long" to "unsigned int" to avoid the build warning. The return value type of populate_node() and its @fpsize argument is adjusted accordingly. With this applied, 256 bytes saved from the stack frame on ARM64 and PPC64 platforms and the above warning isn't seen. Fixes: 50800082f176 ("drivers/of: Avoid recursively calling unflatten_dt_node()") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-19drivers/of: Fix depth when unflattening devicetreeRhyland Klein
When the implementation for unflatten_dt_node() changed from being recursive to being non-recursive, it had a side effect of increasing the depth passed to fdt_next_node() by 1. This is fine most of the time, but it seems that when the end of the dtb is being parsed, it will cause the FDT_END condition in fdt_next_node() to return a different value (returning nextoffset instead of -FDT_ERR_NOTFOUND). This ends up passing an FDT_ERR_TRUNCATED error back to the unflatten_dt_node() which then sees that and complains "Error -8 processing FDT" causing boot to fail. This patch simply avoids incrementing depth and uses modified accesses for local array indices so that the depth is the same as it was before the change as far as fdt_next_node() is concerned. This problem was discovered trying to boot Tegra210-Smaug platforms. Fixes: 50800082f176 ("drivers/of: Avoid recursively calling unflatten_dt_node()") Signed-off-by: Rhyland Klein <rklein@nvidia.com> [robh: squashed in KASAN fix from Rhyland] Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-18Merge tag 'armsoc-cleanups-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups and fixes from Arnd Bergmann: "Traditionally we've had two separate branches for cleanups and non-critical bug fixes, but both of these got smaller with each release and the differences are rather unclear now, so it seems more appropriate to have a combined branch. The most notable change is for OMAP, which gets a small rework to simplify handling of the AUXDATA mechanism used on machines that are not completely DT based yet, along with other work that is used as preparation for dropping the legacy board files" * tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats ARM: dts: exynos: Add MFC memory banks for Peach boards ARM: OMAP2+: n900 needs MMC slot names for legacy user space ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51 ARM: debug: remove extraneous DEBUG_HI3716_UART option ARM: OMAP2+: Simplify auxdata by using the generic match of/platform: Allow secondary compatible match in of_dev_lookup ARM: davinci: use IRQCHIP_DECLARE for cp_intc ARM: davinci: remove unused DA8XX_NUM_UARTS ARM: davinci: simplify call to of populate ARM: DaVinci USB: removed deprecated properties from MUSB config ARM: rockchip: Fix use of plain integer as NULL pointer ARM: realview: hide unused 'pmu_device' object soc: versatile: dynamically detect RealView HBI numbers
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-16of: dynamic: changeset prop-update revert fixPantelis Antoniou
When reverting an update property changeset entry that created a property the reverse operation is a remove property and not an update. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Export of_detach_node()Gavin Shan
This exports of_detach_node() for PowerPC PowerNV PCI hotplug driver. No functional changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Return allocated memory from of_fdt_unflatten_tree()Gavin Shan
This returns the allocate memory chunk, storing the unflattened device tree, from of_fdt_unflatten_tree() so that memory chunk can be released on demand in PowerNV PCI hotplug driver. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Specify parent node in of_fdt_unflatten_tree()Gavin Shan
This adds one more argument to of_fdt_unflatten_tree() to specify the parent node of the FDT blob that is going to be unflattened. In the result, the function can be used to unflatten FDT blob that represents device sub-tree in PowerNV PCI hotplug driver. Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Rename unflatten_dt_node()Gavin Shan
This renames unflatten_dt_node() to unflatten_dt_nodes() as it populates multiple device nodes from FDT blob. No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Avoid recursively calling unflatten_dt_node()Gavin Shan
In current implementation, unflatten_dt_node() is called recursively to unflatten device nodes in FDT blob. It's stress to limited stack capacity, especially to adopt the function to unflatten device sub-tree that possibly has multiple root nodes. In that case, we runs out of stack and the system can't boot up successfully. In order to reuse the function to unflatten device sub-tree, this avoids calling the function recursively, meaning the device nodes are unflattened in one call on unflatten_dt_node(): two arrays are introduced to track the parent path size and the device node of current level of depth, which will be used by the device node on next level of depth to be unflattened. All device nodes in more than 64 level of depth are dropped and hopefully, the system can boot up successfully with the partial device-tree. Also, the parameter "poffset" and "fpsize" are unused and dropped and the parameter "dryrun" is figured out from "mem == NULL". Besides, the return value of the function is changed to indicate the size of memory consumed by the unflatten device tree or error code. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-16drivers/of: Split unflatten_dt_node()Gavin Shan
The function unflatten_dt_node() is called recursively to unflatten device nodes and properties in the FDT blob. It looks complicated and hard to be understood. This splits the function into 3 functions: populate_properties(), populate_node() and unflatten_dt_node(). populate_properties(), which is called by populate_node(), creates properties for the indicated device node. The later one creates the device nodes from FDT blob. populate_node() gets the offset in FDT blob for next device nodes and then calls populate_node(). No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-12PCI, of: Move PCI I/O space management to PCI core codeTomasz Nowicki
No functional changes in this patch. PCI I/O space mapping code does not depend on OF; therefore it can be moved to PCI core code. This way we will be able to use it, e.g., in ACPI PCI code. Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Liviu Dudau <Liviu.Dudau@arm.com>
2016-05-11drivers/of: Add check for null property in of_remove_property()Suraj Jitindar Singh
The validity of the property input argument to of_remove_property() is never checked within the function and thus it is possible to pass a null value. It happens that this will be picked up in __of_remove_property() as no matching property of the device node will be found and thus an error will be returned, however once again there is no explicit check for a null value. By the time this is detected 2 locks have already been acquired which is completely unnecessary if the property to remove is null. Add an explicit check in the function of_remove_property() for a null property value and return -ENODEV in this case, this is consistent with what the previous return value would have been when the null value was not detected and passed to __of_remove_property(). By moving an explicit check for the property paramenter into the of_remove_property() function, this will remove the need to perform this check in calling code before invocation of the of_remove_property() function. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-09iommu: of: enforce const-ness of struct iommu_opsRobin Murphy
As a set of driver-provided callbacks and static data, there is no compelling reason for struct iommu_ops to be mutable in core code, so enforce const-ness throughout. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-05-05mtd: nand: move of_get_nand_xxx() helpers into nand_base.cBoris Brezillon
Now that all drivers go through nand_set_flash_node() to parse the generic NAND properties, we can move all of_get_nand_xxx() helpers in to nand_base.c, make them static and remove of_mtd.c and of_mtd.h. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-01of: of_mdio: Check if MDIO bus controller is availableFlorian Fainelli
Add a check whether the 'struct device_node' pointer passed to of_mdiobus_register() is an available (aka enabled) node in the Device Tree. Rationale for doing this are cases where an Ethernet MAC provides a MDIO bus controller and node, and an additional Ethernet MAC might be connecting its PHY/switches to that first MDIO bus controller, while still embedding one internally which is therefore marked as "disabled". Instead of sprinkling checks like these in callers of of_mdiobus_register(), do this in a central location. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26of_mdio: get_phy_device() doesn't return NULL anymoreSergei Shtylyov
Now that get_phy_device() no longer returns NULL on error, we don't need to check for it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25of: document refcount incrementation of of_get_cpu_node()Masahiro Yamada
This function increments refcount. This is worth noting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-22of/unittest: convert to use an explicit i2c mux corePeter Rosin
Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select op to be in terms of the i2c mux core instead of the child adapter. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-19of: Introduce of_phandle_iterator_args()Joerg Roedel
This helper function can be used to copy the arguments of a phandle to an array. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19of: Introduce of_for_each_phandle() helper macroJoerg Roedel
With this macro any user can easily iterate over a list of phandles. The patch also converts __of_parse_phandle_with_args() to make use of the macro. The of_count_phandle_with_args() function is not converted, because the macro hides the return value of of_phandle_iterator_init(), which is needed in there. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19of: Remove counting special case from __of_parse_phandle_with_args()Joerg Roedel
The index = -1 case in __of_parse_phandle_with_args() is used to just return the number of phandles. That special case needs extra handling, so move it to the place where it is needed: of_count_phandle_with_args(). This allows to further simplify __of_parse_phandle_with_args() later on. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19of: Move phandle walking to of_phandle_iterator_next()Joerg Roedel
Move the code to walk over the phandles out of the loop in __of_parse_phandle_with_args() to a separate function that just works with the iterator handle: of_phandle_iterator_next(). Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19of: Introduce struct of_phandle_iteratorJoerg Roedel
This struct carrys all necessary information to iterate over a list of phandles and extract the arguments. Add an init-function for the iterator and make use of it in __of_parse_phandle_with_args(). Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19fdt: fix extend of cmd lineMax Uvarov
On arm CONFIG_CMDLINE_EXTEND does not append build-in cmdline in kernel to U-boot parameters. Fix it here. Theoretically this patch should repair kdump work where it adds elfcorehdr= and memmap additional parameters to second kernel. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19of: mtd: prepare helper reading NAND ECC algo from DTRafał Miłecki
NAND subsystem is being slightly reworked to store ECC details in separated fields. In future we'll want to add support for more DT properties as specifying every possible setup with a single "nand-ecc-mode" is a pretty bad idea. To allow this let's add a helper that will support something like "nand-ecc-algo" in future. Right now we use it for keeping backward compatibility. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-19of_mdio: make of_mdiobus_register_{device|phy}() *void*Sergei Shtylyov
The results of of_mdiobus_register_{device|phy}() are never checked, so we can make both these functions *void*... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15of, numa: Add NUMA of binding implementation.David Daney
Add device tree parsing for NUMA topology using device "numa-node-id" property in distance-map and cpu nodes. This is a complete rewrite of a previous patch by: Ganapatrao Kulkarni<gkulkarni@caviumnetworks.com> Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-15of/platform: Allow secondary compatible match in of_dev_lookupTony Lindgren
We currently try to match of_dev_auxdata based on compatible, IO address, and device name. But in some cases we have multiple instances of drivers that can use the same auxdata. Let's add an additional secondary lookup for generic compatible match for auxdata if no device specific match is found. This does not change the existing matching, and still allows adding device specific auxdata. This simplifies things as specifying the IO address and device name is prone errors as it requires maintaining an in kernel database for each SoC. To specify a generic match, all that is needed is to add a OF_DEV_AUXDATA entry with no device instance specified: OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata), As the auxdata is already initialized only for the booted SoC, there's not much of a chance of getting things wrong. Let's also fix two checkpatch warnings while at it to add a space before parenthesis in the for loop, and remove a comparison to NULL by using !auxdata->compatible. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-19Merge tag 'devicetree-for-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - new tool 'dtx_diff' to diff DT files - sync kernel's dtc/libfdt to current dtc repo master - fix for reserved memory regions located in highmem - document standard unit suffixes for DT properties - various DT binding doc updates * tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for eGalax_eMPIA Technology Inc Input: ads7846: Add description how to use internal reference (ADS7846) ARM: realview: add EB syscon variants to bindings devicetree: bindings: ARM: Use "uV" for micro-volt serial: fsl-imx-uart: Fix typo in fsl,dte-mode description of: add 'const' for of_property_*_string*() parameter '*np' of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays() of: alloc anywhere from memblock if range not specified kbuild: Allow using host dtc instead of kernel's copy of: resolver: Add missing of_node_get and of_node_put of: Add United Radiant Technology Corporation vendor prefix dt/bindings: add documentation on standard property unit suffixes scripts/dtc: Update to upstream commit b06e55c88b9b ARM: boot: Add an implementation of strnlen for libfdt scripts/dtc: dtx_diff - add info to error message dtc: create tool to diff device trees
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-18Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ...
2016-03-17Merge tag 'tty-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-14of_mdio: use PTR_ERR_OR_ZERO()Sergei Shtylyov
PTR_ERR_OR_ZERO() is open coded in of_phy_register_fixed_link(), so just call it directly... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14of_mdio: use IS_ERR_OR_NULL()Sergei Shtylyov
IS_ERR_OR_NULL() is open coded in of_mdiobus_register_phy(), so just call it directly... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14of_mdio: mdio_device_create() never returns NULLSergei Shtylyov
mdio_device_create() never returns NULL, thus checking for it in of_mdiobus_register_device() is pointless... Suggested-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03of: add 'const' for of_property_*_string*() parameter '*np'David Rivshin
The of_property_{read,count,match}_string* family of functions never modify the struct device_node pointer that is passed in, so there is no reason for it to be non-const. Equivalent functions for all other types already take a 'const struct device_node *np'. Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays()Sergey Senozhatsky
of_overlay_destroy() can return `-ENODEV' error code once it failed to find the requested overlay in `ov_idr'. However, of_unittest_destroy_tracked_overlays() does not handle this error code correctly and continues to call of_overlay_destroy() on the 'missing' overlay over and over again. This results in a printk flood [..] [ 33.497583] of_overlay_destroy: Could not find overlay #6 [ 33.497583] of_overlay_destroy: Could not find overlay #6 [ 33.497584] ### dt-test ### of_unittest_destroy_tracked_overlays: overlay destroy failed for #6 [ 33.497584] ### dt-test ### of_unittest_destroy_tracked_overlays: overlay destroy failed for #6 [ 33.497586] of_overlay_destroy: Could not find overlay #6 [ 33.497586] of_overlay_destroy: Could not find overlay #6 [ 33.497587] ### dt-test ### of_unittest_destroy_tracked_overlays: overlay destroy failed for #6 [ 33.497587] ### dt-test ### of_unittest_destroy_tracked_overlays: overlay destroy failed for #6 [..] which is not really good due to printk design, and can lead to soft lockups, hard lockups, etc. (depending on the context console_unlock() is being called from). The problem has bee observed in real life and reported by Ying Huang. This patch does not address the root cause of missing overlay in `ov_idr', it fixes the endless loop only. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: kernel test robot <ying.huang@linux.intel.com> Link: lkml.kernel.org/r/87fuwk1c0o.fsf@yhuang-dev.intel.com Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03of: alloc anywhere from memblock if range not specifiedVinayak Menon
early_init_dt_alloc_reserved_memory_arch passes end as 0 to __memblock_alloc_base, when limits are not specified. But __memblock_alloc_base takes end value of 0 as MEMBLOCK_ALLOC_ACCESSIBLE and limits the end to memblock.current_limit. This results in regions never being placed in HIGHMEM area, for e.g. CMA. Let __memblock_alloc_base allocate from anywhere in memory if limits are not specified. Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-01of_mdio: fix kernel-doc for of_phy_connect()Sergei Shtylyov
The 'flags' parameter of the of_phy_connect() function wasn't described in the kernel-doc comment... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01of_mdio: kill useless variable in of_mdiobus_register()Sergei Shtylyov
of_mdiobus_register() declares the 'paddr' variable to hold the result of the of_get_property() but only uses it once after that while the function can be called directly from the *if* statement. Remove that variable and switch to calling of_find_property() instead since we don't care about the "reg" property's value anyway... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>