summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.h
AgeCommit message (Collapse)Author
2017-03-22PCI: Remove pci_resource_bar() and pci_iov_resource_bar()Bjorn Helgaas
[ Upstream commit 286c2378aaccc7343ebf17ec6cd86567659caf70 ] pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22PCI: Separate VF BAR updates from standard BAR updatesBjorn Helgaas
[ Upstream commit 6ffa2489c51da77564a0881a73765ea2169f955d ] Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-03Merge branch 'pci/pm' into nextBjorn Helgaas
* pci/pm: PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM
2016-09-28PCI: Query platform firmware for device power stateLukas Wunner
Usually the most accurate way to determine a PCI device's power state is to read its PM Control & Status Register. There are two cases however when this is not an option: If the device doesn't have the PM capability at all, or if it is in D3cold (in which case its config space is inaccessible). In both cases, we can alternatively query the platform firmware for its opinion on the device's power state. To facilitate this, augment struct pci_platform_pm_ops with a ->get_power callback and implement it for acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far). It is used by a forthcoming commit to let pci_update_current_state() recognize D3cold. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-15PCI: Add Precision Time Measurement (PTM) supportJonathan Yong
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22). Enable PTM on PTM Root devices and switch ports. This does not enable PTM on endpoints. There currently are no PTM-capable devices on the market, but it is expected to be supported by the Intel Apollo Lake platform. [bhelgaas: complete rework] Signed-off-by: Jonathan Yong <jonathan.yong@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-13PCI: Put PCIe ports into D3 during suspendMika Westerberg
Currently the Linux PCI core does not touch power state of PCI bridges and PCIe ports when system suspend is entered. Leaving them in D0 consumes power unnecessarily and may prevent the CPU from entering deeper C-states. With recent PCIe hardware we can power down the ports to save power given that we take into account few restrictions: - The PCIe port hardware is recent enough, starting from 2015. - Devices connected to PCIe ports are effectively in D3cold once the port is transitioned to D3 (the config space is not accessible anymore and the link may be powered down). - Devices behind the PCIe port need to be allowed to transition to D3cold and back. There is a way both drivers and userspace can forbid this. - If the device behind the PCIe port is capable of waking the system it needs to be able to do so from D3cold. This patch adds a new flag to struct pci_device called 'bridge_d3'. This flag is set and cleared by the PCI core whenever there is a change in power management state of any of the devices behind the PCIe port. When system later on is suspended we only need to check this flag and if it is true transition the port to D3 otherwise we leave it in D0. Also provide override mechanism via command line parameter "pcie_port_pm=[off|force]" that can be used to disable or enable the feature regardless of the BIOS manufacturing date. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-15PCI: Add pci_set_vpd_size() to set VPD sizeHariprasad Shenai
After 104daa71b396 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. We don't attempt to read past that valid size because that causes some devices to crash. However, some devices do have data past that valid size. For example, Chelsio adapters contain two VPD structures, and the driver needs both of them. Add pci_set_vpd_size(). If a driver knows it is safe to read past the end of the VPD data structure at offset 0, it can use pci_set_vpd_size() to allow access to as much data as it needs. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa71b396 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-29PCI: Fold struct pci_vpd_pci22 into struct pci_vpdBjorn Helgaas
We only support one flavor of VPD, so there's no need to complicate things by having a "generic" struct pci_vpd and a more specific struct pci_vpd_pci22. Fold struct pci_vpd_pci22 directly into struct pci_vpd. [bhelgaas: remove NULL check before kfree of dev->vpd (per kfreeaddr.cocci)] Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Rename VPD symbols to remove unnecessary "pci22"Bjorn Helgaas
There's only one kind of VPD, so we don't need to qualify it as "the version described by PCI spec rev 2.2." Rename the following symbols to remove unnecessary "pci22": PCI_VPD_PCI22_SIZE -> PCI_VPD_MAX_SIZE pci_vpd_pci22_size() -> pci_vpd_size() pci_vpd_pci22_wait() -> pci_vpd_wait() pci_vpd_pci22_read() -> pci_vpd_read() pci_vpd_pci22_write() -> pci_vpd_write() pci_vpd_pci22_ops -> pci_vpd_ops pci_vpd_pci22_init() -> pci_vpd_init() Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Remove struct pci_vpd_ops.release function pointerBjorn Helgaas
The struct pci_vpd_ops.release function pointer is always pci_vpd_pci22_release(), so there's no need for the flexibility of a function pointer. Inline the pci_vpd_pci22_release() body into pci_vpd_release() and remove pci_vpd_pci22_release() and the struct pci_vpd_ops.release function pointer. Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29PCI: Move pci_vpd_release() from header file to pci/access.cBjorn Helgaas
Move pci_vpd_release() so it's next to the other VPD functions. This puts it next to pci_vpd_pci22_init(), which allocates the space freed by pci_vpd_release(). Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-01-21Merge tag 'pci-v4.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
2015-12-09PCI / PM: constify pci_platform_pm_ops structureJulia Lawall
The pci_platform_pm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-01PCI/MSI: Remove empty pci_msi_init_pci_dev()Bjorn Helgaas
4a7cc8316705 ("genirq/MSI: Move msi_list from struct pci_dev to struct device") removed the contents of pci_msi_init_pci_dev(). All implementation of it are now empty, so remove it completely. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-25ARM/PCI: Move align_resource function pointer to pci_host_bridge structureGabriele Paoloni
Commit b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer") introduced an ARM-specific align_resource() function pointer. This is not portable to other arches and doesn't work for platforms with two different PCIe host bridge controllers. Move the function pointer to the pci_host_bridge structure so each host bridge driver can specify its own align_resource() function. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-06Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-10-29PCI: Add support for Enhanced Allocation devicesSean O. Stalley
Add support for devices using Enhanced Allocation entries instead of BARs. This allows the kernel to parse the EA Extended Capability structure in PCI config space and claim the BAR-equivalent resources. See https://pcisig.com/sites/default/files/specification_documents/ECN_Enhanced_Allocation_23_Oct_2014_Final.pdf [bhelgaas: add spec URL, s/pci_ea_set_flags/pci_ea_flags/, consolidate declarations, print unknown property in hex to match spec] Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> [david.daney@cavium.com: Add more support/checking for Entry Properties, allow EA behind bridges, rewrite some error messages.] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-12PCI / PM: Avoid resuming more devices during system suspendRafael J. Wysocki
Commit bac2a909a096 (PCI / PM: Avoid resuming PCI devices during system suspend) introduced a mechanism by which some PCI devices that were runtime-suspended at the system suspend time might be left in that state for the duration of the system suspend-resume cycle. However, it overlooked devices that were marked as capable of waking up the system just because PME support was detected in their PCI config space. Namely, in that case, device_can_wakeup(dev) returns 'true' for the device and if the device is not configured for system wakeup, device_may_wakeup(dev) returns 'false' and it will be resumed during system suspend even though configuring it for system wakeup may not really make sense at all. To avoid this problem, simply disable PME for PCI devices that have not been configured for system wakeup and are runtime-suspended at the system suspend time for the duration of the suspend-resume cycle. If the device is in D3cold, its config space is not available and it shouldn't be written to, but that's only possible if the device has platform PM support and the platform code is responsible for checking whether or not the device's configuration is suitable for system suspend in that case. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-15PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirksWei Yang
Some quirks search for a HyperTransport capability and use a hard-coded TTL value of 48 to avoid an infinite loop. Move the definition of PCI_FIND_CAP_TTL to pci.h and use it instead of the hard-coded TTL values. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-12Merge branches 'pci/aspm', 'pci/enumeration', 'pci/hotplug', 'pci/misc', ↵Bjorn Helgaas
'pci/msi', 'pci/resource' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Simplify Clock Power Management setting PCI: Use dev->has_secondary_link to find downstream PCIe links PCI/ASPM: Use dev->has_secondary_link to find downstream links PCI: Add dev->has_secondary_link to track downstream PCIe links PCI/ASPM: Remove redundant PCIe port type checking PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter * pci/enumeration: PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: designware: Use pci_scan_root_bus() for simplicity PCI: tegra: Remove tegra_pcie_scan_bus() PCI: mvebu: Remove mvebu_pcie_scan_bus() * pci/hotplug: PCI: pciehp: Wait for hotplug command completion where necessary PCI: Propagate the "ignore hotplug" setting to parent ACPI / hotplug / PCI: Check ignore_hotplug for all downstream devices PCI: pciehp: Drop pointless label from pciehp_probe() PCI: pciehp: Drop pointless ACPI-based "slot detection" check * pci/misc: PCI: Remove unused pci_dma_burst_advice() PCI: Remove unused pcibios_select_root() (again) PCI: Remove unnecessary #includes of <asm/pci.h> PCI: Include <linux/pci.h>, not <asm/pci.h> * pci/msi: PCI/MSI: Remove unused pci_msi_off() PCI/MSI: Drop pci_msi_off() calls from quirks ntb: Drop pci_msi_off() call during probe virtio_pci: drop pci_msi_off() call during probe PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() PCI/MSI: Rename msi_set_enable(), msix_clear_and_set_ctrl() * pci/resource: PCI: Add pci_bus_addr_t * pci/virtualization: ACPI / PCI: Account for ARI in _PRT lookups PCI: Move pci_ari_enabled() to global header PCI: Add function 1 DMA alias quirk for Marvell 9120 PCI: Add ACS quirks for Intel 9-series PCH root ports
2015-05-29PCI: Move pci_ari_enabled() to global headerAlex Williamson
pci_ari_enabled() is useful outside of drivers/pci, particularly for deriving INTx routing via ACPI _PRT, so move it to the global header. Also convert to bool return. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-07PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl()Michael S. Tsirkin
Move pci_msi_set_enable() and pci_msix_clear_and_set_ctrl() to drivers/pci/pci.h so they're available even when MSI isn't configured into the kernel. No functional change. [bhelgaas: changelog, split into separate patch] Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2015-04-16Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-08PCI: Export pci_find_host_bridge() for use inside PCI coreAaron Lu
The find_pci_host_bridge() function can be useful to other PCI code so export it. Change its name to pci_find_host_bridge(). Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-31PCI: Calculate maximum number of buses required for VFsWei Yang
An SR-IOV device can change its First VF Offset and VF Stride based on the values of ARI Capable Hierarchy and NumVFs. The number of buses required for all VFs is determined by NumVFs, First VF Offset, and VF Stride (see SR-IOV spec r1.1, sec 2.1.2). Previously pci_iov_bus_range() computed how many buses would be required by TotalVFs, but this was based on a single NumVFs value and may not have been the maximum for all NumVFs configurations. Iterate over all valid NumVFs and calculate the maximum number of bus numbers that could ever be required for VFs of this device. [bhelgaas: changelog, compute busnr of NumVFs, not TotalVFs, remove kerenl-doc comment marker] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Keep individual VF BAR size in struct pci_sriovWei Yang
Currently we don't store the individual VF BAR size. We calculate it when needed by dividing the PF's IOV resource size (which contains space for *all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability again. Keep the individual VF BAR size in struct pci_sriov.barsz[], add pci_iov_resource_size() to retrieve it, and use that instead of doing the division or reading the SR-IOV capability BAR. [bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove SR-IOV capability BAR sizing] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-02-10Merge branches 'pm-pci' and 'pm-cpuidle'Rafael J. Wysocki
* pm-pci: PCI / PM: Avoid resuming PCI devices during system suspend * pm-cpuidle: drivers: cpuidle: Don't initialize big.LITTLE driver if MCPM is unavailable
2015-01-23PCI / PM: Avoid resuming PCI devices during system suspendRafael J. Wysocki
Commit f25c0ae2b4c4 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend) modified the ACPI PM domain's system suspend callbacks to allow devices attached to it to be left in the runtime-suspended state during system suspend so as to optimize the suspend process. This was based on the general mechanism introduced by commit aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily). Extend that approach to PCI devices by modifying the PCI bus type's ->prepare callback to return 1 for devices that are runtime-suspended when it is being executed and that are in a suitable power state and need not be resumed going forward. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2015-01-16PCI: Add pci_bus_clip_resource() to clip to fit upstream windowYinghai Lu
Add pci_bus_clip_resource(). If a PCI-PCI bridge window overlaps an upstream bridge window but is not completely contained by it, this clips the downstream window so it fits inside the upstream one. No functional change (this adds the function but no callers). [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2014-12-11Merge tag 'pci-v3.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Here are the PCI changes intended for v3.19. I don't think there's anything very exciting here, but there was a lot of MSI-related stuff coming via Thomas. Details: NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert)" * tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits) PCI: Remove fixed parameter in pci_iov_resource_bar() PCI: Add informational printk for invalid BARs PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM PCI: spear: Remove unnecessary OOM message PCI: mvebu: Add a blank line after declarations PCI: designware: Add a blank line after declarations PCI: exynos: Remove unnecessary return statement PCI: imx6: Use tabs for indentation PCI: keystone: Remove unnecessary OOM message PCI: Remove unused and broken to_hotplug_slot() PCI: Make FLR and AF FLR reset warning messages different PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() PCI: layerscape: Add Freescale Layerscape PCIe driver PCI: Simplify if-return sequences PCI: Delete unnecessary NULL pointer checks PCI: Shrink decoding-disabled window while sizing BARs ...
2014-11-19PCI: Remove fixed parameter in pci_iov_resource_bar()Myron Stowe
pci_iov_resource_bar() always sets its 'pci_bar_type' parameter to 'pci_bar_unknown'. Drop the parameter and just use 'pci_bar_unknown' directly in the callers. No functional change intended. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Chris Wright <chrisw@sous-sol.org> CC: Yu Zhao <yuzhao@google.com>
2014-11-13PCI: Apply _HPX Link Control settings to all devices with a linkYinghai Lu
Previously we applied _HPX type 2 record Link Control register settings only to bridges with a subordinate bus. But it's better to apply them to all devices with a link because if the subordinate bus has not been allocated yet, we won't apply settings to the device. Use pcie_cap_has_lnkctl() to determine whether the device has a Link Control register instead of looking at dev->subordinate. [bhelgaas: changelog] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-28Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' ↵Bjorn Helgaas
into next * pci/hotplug: PCI: cpqphp: Fix possible null pointer dereference NVMe: Implement PCIe reset notification callback PCI: Notify driver before and after device reset * pci/pci_is_bridge: pcmcia: Use pci_is_bridge() to simplify code PCI: pciehp: Use pci_is_bridge() to simplify code PCI: acpiphp: Use pci_is_bridge() to simplify code PCI: cpcihp: Use pci_is_bridge() to simplify code PCI: shpchp: Use pci_is_bridge() to simplify code PCI: rpaphp: Use pci_is_bridge() to simplify code sparc/PCI: Use pci_is_bridge() to simplify code powerpc/PCI: Use pci_is_bridge() to simplify code ia64/PCI: Use pci_is_bridge() to simplify code x86/PCI: Use pci_is_bridge() to simplify code PCI: Use pci_is_bridge() to simplify code PCI: Add new pci_is_bridge() interface PCI: Rename pci_is_bridge() to pci_has_subordinate() * pci/virtualization: PCI: Introduce new device binding path using pci_dev.driver_override Conflicts: drivers/pci/pci-sysfs.c
2014-05-27PCI: Rename pci_is_bridge() to pci_has_subordinate()Yijing Wang
Previously, pci_is_bridge() returned true only when a subordinate bus existed. Rename pci_is_bridge() to pci_has_subordinate() to better indicate what we're checking. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-29PCI: Remove unnecessary __ref annotationsBjorn Helgaas
Some PCI functions used to be marked __devinit. When CONFIG_HOTPLUG was not set, these functions were discarded after boot. A few callers of these __devinit functions were marked __ref to indicate that they could safely call the __devinit functions even though the callers were not __devinit. But CONFIG_HOTPLUG and __devinit are now gone, and the need for the __ref annotations is also gone, so remove them. Relevant historical commits: 54b956b90360 Remove __dev* markings from init.h a8e4b9c101ae PCI: add generic pci_hp_add_bridge() 0ab2b57f8db8 PCI: fix section mismatch warning in pci_scan_child_bus 451124a7cc6c PCI: fix 4x section mismatch warnings Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-19PCI: Remove unused SR-IOV VF Migration supportBjorn Helgaas
This reverts commit 74bb1bcc7dbb ("PCI: handle SR-IOV Virtual Function Migration"), removing this exported interface: pci_sriov_migration() Since pci_sriov_migration() is unused, it is impossible to schedule sriov_migration_task() or use any of the other migration infrastructure. This is based on Stephen Hemminger's patch (see link below), but goes a bit further. Link: http://lkml.kernel.org/r/20131227132710.7190647c@nehalam.linuxnetplumber.net Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Stephen Hemminger <stephen@networkplumber.org>
2014-01-13PCI: Make local functions staticStephen Hemminger
Using 'make namespacecheck' identify code which should be declared static. Checked for users in other driver/archs as well. Compile tested only. This stops exporting the following interfaces to modules: pci_target_state() pci_load_saved_state() [bhelgaas: retained pci_find_next_ext_capability() and pci_cfg_space_size()] Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-07PCI: convert bus code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the PCI bus code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-10-07PCI: convert bus code to use bus_groupsGreg Kroah-Hartman
The bus_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the PCI bus code to use the correct field. Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-07-31PCI: expose pcie_link_speed and pcix_bus_speed arraysJacob Keller
pcie_link_speed and pcix_bus_speed are arrays used by probe.c to correctly convert lnksta register values into the pci_bus_speed enum. These static arrays are useful outside probe for this purpose. This patch makes these defines into conist arrays and exposes them with an extern header in drivers/pci/pci.h -v2- * move extern declarations to drivers/pci/pci.h CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-25PCI: Convert class code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the PCI class code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-22PCI / ACPI: Use boot-time resource allocation rules during hotplugJiang Liu
On x86 platforms, the kernel respects PCI resource assignments from the BIOS and only reassigns resources for unassigned BARs at boot time. However, with the ACPI-based hotplug (acpiphp), it ignores the BIOS' PCI resource assignments completely and reassigns all resources by itself. This causes differences in PCI resource allocation between boot time and runtime hotplug to occur, which is generally undesirable and sometimes actively breaks things. Namely, if there are enough resources, reassigning all PCI resources during runtime hotplug should work, but it may fail if the resources are constrained. This may happen, for instance, when some PCI devices with huge MMIO BARs are involved in the runtime hotplug operations, because the current PCI MMIO alignment algorithm may waste huge chunks of MMIO address space in those cases. On the Alexander's Sony VAIO VPCZ23A4R the BIOS allocates limited MMIO resources for the dock station which contains a device (graphics adapter) with a 256MB MMIO BAR. An attempt to reassign that during runtime hotplug causes the dock station MMIO window to be exhausted and acpiphp fails to allocate resources for the majority of devices on the dock station as a result. To prevent that from happening, modify acpiphp to follow the boot time resources allocation behavior so that the BIOS' resource assignments are respected during runtime hotplug too. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=56531 Reported-and-tested-by: Alexander E. Patrakov <patrakov@gmail.com> Tested-by: Illya Klymov <xanf@xanf.me> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-17PCI: Remove "extern" from function declarationsBjorn Helgaas
We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-27Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas
* pci/yinghai-root-bus-hotplug: PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found PCI/ACPI: Print info if host bridge notify handler installation fails PCI: acpiphp: Move host bridge hotplug to pci_root.c PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work() PCI: Make device create/destroy logic symmetric PCI: Fix reference count leak in pci_dev_present() PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally PCI: Add root bus children dev's res to fail list PCI: acpiphp: Add is_hotplug_bridge detection Conflicts: drivers/pci/pci.h
2013-01-27Merge branch 'pci/yijing-ari' into nextBjorn Helgaas
* pci/yijing-ari: PCI: shpchp: Iterate over all devices in slot, not functions 0-7 PCI: sgihp: Iterate over all devices in slot, not functions 0-7 PCI: cpcihp: Iterate over all devices in slot, not functions 0-7 PCI: pciehp: Iterate over all devices in slot, not functions 0-7 PCI: Consolidate "next-function" functions PCI: Rename pci_enable_ari() to pci_configure_ari() PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
2013-01-25PCI: Put pci_dev in device tree as early as possibleYinghai Lu
We want to put pci_dev structs in the device tree as soon as possible so for_each_pci_dev() iteration will not miss them, but driver attachment needs to be delayed until after pci_assign_unassigned_resources() to make sure all devices have resources assigned first. This patch moves device registering from pci_bus_add_devices() to pci_device_add(), which happens earlier, leaving driver attachment in pci_bus_add_devices(). It also removes unattached child bus handling in pci_bus_add_devices(). That's not needed because child bus via pci_add_new_bus() is already in parent bus children list. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25PCI: Rename pci_enable_ari() to pci_configure_ari()Yijing Wang
pci_enable_ari() now supports enabling or disabling ARI forwarding. So rename pci_enable_ari() to pci_configure_ari() for easy understanding. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-03ACPI / PCI: Rework the setup and cleanup of device wakeupRafael J. Wysocki
Currently, the ACPI wakeup capability of PCI devices is set up in two different places, partially in acpi_pci_bind() where runtime wakeup is initialized and partially in platform_pci_wakeup_init(), where system wakeup is initialized. The cleanup is only done in acpi_pci_unbind() and it only covers runtime wakeup. Use the new .setup() and .cleanup() callbacks in struct acpi_bus_type to consolidate that code and do the setup and the cleanup each in one place. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
generated by cgit v0.10.2 at 2024-11-18 09:34:37 (GMT)