summaryrefslogtreecommitdiff
path: root/drivers/pci/setup-res.c
AgeCommit message (Collapse)Author
2010-07-16PCI: fall back to original BIOS BAR addressesBjorn Helgaas
If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew <nitr0@seti.kr.ua> Tested-by: Andrew <nitr0@seti.kr.ua> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11PCI: change resource collision messages from KERN_ERR to KERN_INFOBjorn Helgaas
We can often deal with PCI resource issues by moving devices around. In that case, there's no point in alarming the user with messages like these. There are many bug reports where the message itself is the only problem, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 . Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: for address space collisions, show conflicting resourceBjorn Helgaas
With request_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04PCI: improve discovery/configuration messagesBjorn Helgaas
This makes PCI resource management messages more consistent and adds a few new messages to aid debugging. Whenever we assign resources to a device, update a BAR, or change a bridge aperture, it's worth noting it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04vsprintf: use %pR, %pr instead of %pRt, %pRfBjorn Helgaas
Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This is the diff between v1 and v2. The changes in this patch are: - tidied vsprintf stack buffer to shrink and compute size more accurately - use %pR for decoding and %pr for "raw" (with type and flags) instead of adding %pRt and %pRf [1] http://lkml.org/lkml/2009/10/6/491 [2] http://lkml.org/lkml/2009/10/13/441 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04PCI: print resources consistently with %pRtBjorn Helgaas
This uses %pRt to print additional resource information (type, size, prefetchability, etc.) consistently. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06PCI: remove pci_assign_resource_fixed()Bjorn Helgaas
Adrian commented out this function in 2baad5f96b49, but I don't think it's even worth cluttering the file with the unused code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09PCI: export pci_claim_resource for driver useJesse Barnes
yenta needs this for example. Acked-by: Matthew Wilcox <willy@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-30PCI SR-IOV: correct broken resource alignment calculationsChris Wright
An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-02Make pci_claim_resource() use request_resource() rather than insert_resource()Linus Torvalds
This function has traditionally used "insert_resource()", because before commit cebd78a8c5 ("Fix pci_claim_resource") it used to just insert the resource into whatever root resource tree that was indicated by "pcibios_select_root()". So there Matthew fixed it to actually look up the proper parent resource, which means that now it's actively wrong to then traverse the resource tree any more: we already know exactly where the new resource should go. And when we then did commit a76117dfd6 ("x86: Use pci_claim_resource"), which changed the x86 PCI code from the open-coded pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { to using if (pci_claim_resource(dev, idx) < 0) { that "insert_resource()" now suddenly became a problem, and causes a regression covered by http://bugzilla.kernel.org/show_bug.cgi?id=13891 which this fixes. Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Linux PCI <linux-pci@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-22Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-17Fix pci_claim_resourceMatthew Wilcox
Instead of starting from the iomem or ioport roots, start from the parent bus' resources. This fixes a bug where child resources would appear above their parents resources if they had the same size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11PCI: improve resource allocation under transparent bridgesYinghai Lu
We could run out of space under under 4g, but devices under transparent bridges can use 64bit resources, so keep trying on the parent bus until we hit a non-transparent bridge. Impact: better support for assigning unassigned resources Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: allow assignment of memory resources with a specified alignmentYuji Shimada
This patch allows memory resources to be assigned with a specified alignment at boot-time or run-time. The patch is useful when we use PCI pass-through, because page-aligned memory resources are required to securely share PCI resources with guest drivers. If you want to assign the resource at boot time, please set "pci=resource_alignment=" boot parameter. This is format of "pci=resource_alignment=" boot parameter: [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...] Specifies alignment and device to reassign aligned memory resources. If <order of align> is not specified, PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. This is example: pci=resource_alignment=20@07:00.0;18@0f:00.0;00:1d.7 If you want to assign the resource at run-time, please set "/sys/bus/pci/resource_alignment" file, and hot-remove the device and hot-add the device. For this purpose, fakephp or PCI hotplug interfaces can be used. The format of "/sys/bus/pci/resource_alignment" file is the same with boot parameter. You can use "," instead of ";". For example: # cd /sys/bus/pci # echo -n 20@12:00.0 > resource_alignment # echo 1 > devices/0000:12:00.0/remove # echo 1 > rescan Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: add a new function to map BAR offsetsYu Zhao
Add a function to map a given resource number to a corresponding register so drivers can get the offset and type of device specific BARs. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: remove unnecessary arg of pci_update_resource()Yu Zhao
This cleanup removes unnecessary argument 'struct resource *res' in pci_update_resource(), so it takes same arguments as other companion functions (pci_assign_resource(), etc.). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: Don't carp about BAR allocation failures in quiet bootIngo Molnar
These are easy to trigger (more or less harmlessly) with multiple video cards, since the ROM BAR will typically not be given any space by the BIOS bridge setup. No reason to punish quiet boot for this. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: use resource_size() everywhere.Zhao, Yu
This is a cleanup that replaces the resource calculation formula with resource_size(). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20pci: Use new %pR to print resource rangesBenjamin Herrenschmidt
This converts things in drivers/pci to use %pR to printout the content of a struct resource instead of hand-casted %llx or other variants. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-25PCI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-21PCI: clean up resource alignment managementIvan Kokshaysky
Done per Linus' request and suggestions. Linus has explained that better than I'll be able to explain: On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote: > Actually, before we go any further, there might be a less intrusive > alternative: add just a couple of flags to the resource flags field (we > still have something like 8 unused bits on 32-bit), and use those to > implement a generic "resource_alignment()" routine. > > Two flags would do it: > > - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device > resources) > > - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources > during probing) > > and then the case of both flags zero (or both bits set) would actually be > "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we > actually allocate the resource (so that we don't use the "start" field as > alignment incorrectly when it no longer indicates alignment). > > That wouldn't be totally generic, but it would have the nice property of > automatically at least add sanity checking for that whole "res->start has > the odd meaning of 'alignment' during probing" and remove the need for a > new field, and it would allow us to have a generic "resource_alignment()" > routine that just gets a resource pointer. Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-21PCI: add generic pci_enable_resources()Bjorn Helgaas
Each architecture has its own pcibios_enable_resources() implementation. These differ in many minor ways that have nothing to do with actual architectural differences. Follow-on patches will make most arches use this generic version instead. This version is based on powerpc, which seemed most up-to-date. The only functional difference from the x86 version is that this uses "!r->parent" to check for resource collisions instead of "!r->start && r->end". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-21PCI: #if 0 pci_assign_resource_fixed()Adrian Bunk
An unused function that bloated the kernel only when CONFIG_EMBEDDED was enabled... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Fix warning in setup-res.c on 32-bit platforms with 64-bit resourcesBenjamin Herrenschmidt
This adds appropriate casts to avoid a warning and print the correct values in pr_debug. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: drivers/pci/: remove unused exportsAdrian Bunk
This patch removes the following unused exports: - remove the following unused EXPORT_SYMBOL's: - pci-acpi.c: pci_osc_support_set - proc.c: pci_proc_detach_bus - remove the following unused EXPORT_SYMBOL_GPL's: - bus.c: pci_walk_bus - probe.c: pci_create_bus - setup-res.c: pci_claim_resource Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-03pci: do not mark exported functions as __devinitSam Ravnborg
Functions marked __devinit will be removed after kernel init. But being exported they are potentially called by a module much later. So the safer choice seems to be to keep the function even in the non CONFIG_HOTPLUG case. This silence the follwoing section mismatch warnings: WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges' WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20PCI legacy resource fixRalf Baechle
Since commit 368c73d4f689dae0807d0a2aa74c61fd2b9b075f the kernel will try to update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if pci_assign_unassigned_resources() is used to do full resource assignment of the bus. This fails because in the PIIX4 these BAR registers have implicitly assumed values and read back as zero; it used to work because the kernel used to just write zero to that register the read back value did match what was written. The fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource as non-movable. This will also be useful to keep other import system resources from being moved around - for example system consoles on PCI busses. [akpm@osdl.org: cleanup] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27[PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in pci core and hotplug ↵Greg Kroah-Hartman
drivers This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Add pci_assign_resource_fixed -- allow fixed address assignmentsKumar Gala
PCI: Add pci_assign_resource_fixed -- allow fixed address assignments On some embedded systems the PCI address for hotplug devices are not only known a priori but are required to be at a given PCI address for other master in the system to be able to access. An example of such a system would be an FPGA which is setup from user space after the system has booted. The FPGA may be access by DSPs in the system and those DSPs expect the FPGA at a fixed PCI address. Added pci_assign_resource_fixed() as a way to allow assignment of the PCI devices's BARs at fixed PCI addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-01[PATCH] PCI Hotplug/powerpc: module build breaklinas
The RPAPHP hoplug driver will not build as a module, because it calls on pci_claim_resource(), which is not exported. This exports the symbol. Problem reported by Olaf Hering <olh@suse.de> A grep indicates that building drivers/parisc/lba_pci.c would have trouble building as a module for the same reason. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] Make sparc64 use setup-res.cDavid S. Miller
There were three changes necessary in order to allow sparc64 to use setup-res.c: 1) Sparc64 roots the PCI I/O and MEM address space using parent resources contained in the PCI controller structure. I'm actually surprised no other platforms do this, especially ones like Alpha and PPC{,64}. These resources get linked into the iomem/ioport tree when PCI controllers are probed. So the hierarchy looks like this: iomem --| PCI controller 1 MEM space --| device 1 device 2 etc. PCI controller 2 MEM space --| ... ioport --| PCI controller 1 IO space --| ... PCI controller 2 IO space --| ... You get the idea. The drivers/pci/setup-res.c code allocates using plain iomem_space and ioport_space as the root, so that wouldn't work with the above setup. So I added a pcibios_select_root() that is used to handle this. It uses the PCI controller struct's io_space and mem_space on sparc64, and io{port,mem}_resource on every other platform to keep current behavior. 2) quirk_io_region() is buggy. It takes in raw BUS view addresses and tries to use them as a PCI resource. pci_claim_resource() expects the resource to be fully formed when it gets called. The sparc64 implementation would do the translation but that's absolutely wrong, because if the same resource gets released then re-claimed we'll adjust things twice. So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource() conversion before passing it on to pci_claim_resource(). 3) I was mistakedly __init'ing the function methods the PCI controller drivers provide on sparc64 to implement some parts of these routines. This was, of course, easy to fix. So we end up with the following, and that nasty SPARC64 makefile ifdef in drivers/pci/Makefile is finally zapped. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08[PATCH] PCI: restore BAR values after D3hot->D0 for devices that need itJohn W. Linville
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-26Ignore disabled ROM resources at setupLinus Torvalds
Writing even a disabled value seems to mess up some matrox graphics cards. It may be a card-related issue, but we may also be writing reserved low bits in the result. This was a fall-out of switching x86 over to the generic PCI resource allocation code, and needs more debugging. In particular, the old x86 code defaulted to not doing any resource allocations at all for ROM resources. In the meantime, this has been reported to make X happier by Helge Hafting <helgehaf@aitel.hist.no>. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-09Revert "[PATCH] PCI: restore BAR values..."Linus Torvalds
Revert commit fec59a711eef002d4ef9eb8de09dd0a26986eb77, which is breaking sparc64 that doesn't have a working pci_update_resource. We'll re-do this after 2.6.13 when we'll do it all properly.
2005-08-07[PATCH] Fix restore of 64-bit PCI BAR'sIvan Kokshaysky
For 64-bit BAR[i] only pci_dev->resource[i] is valid, ->resource[i+1] slot is unused and contains zeroes in all fields. So when we update a PCI BAR, all we need is just to check that we're going to update a _valid_ resource. Also make sure to write high bits - use "x >> 16 >> 16" (rather than the simpler ">> 32") to avoid warnings on 32-bit architectures where we're not going to have any high bits. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05[PATCH] PCI: restore BAR values after D3hot->D0 for devices that need itJohn W. Linville
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!