summaryrefslogtreecommitdiff
path: root/drivers/power/reset
AgeCommit message (Collapse)Author
2013-02-20Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "Four new drivers: - goldfish_battery: This is Android Emulator battery driver. Originally from Google, but Intel folks reshaped it for mainline - pm2301_charger: A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500 battery management core - qnap-poweroff: The driver adds poweroff functionality for QNAP NAS boxes - restart-poweroff: A generic driver that implements 'power off by restarting'. The actual poweroff functionality is implemented through a bootloader, so Linux' task is just to restart the box. The driver is useful on Buffalo Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on submitting the driver (as well as qnap-poweroff above). Additionally: - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing internal ST-Ericsson development tree with the mainline. Lee Jones @ Linaro worked on compilation and reshaping these series. - New health properties for the power supplies: "Watchdog timer expire" and "Safety timer expire" - As usual, a bunch of fixes/cleanups here and there" * tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits) bq2415x_charger: Add support for offline and 100mA mode generic-adc-battery: Fix forever loop in gab_remove() goldfish_battery: Add missing GENERIC_HARDIRQS dependency da9030_battery: Include notifier.h bq27x00_battery: Fix reporting battery temperature power/reset: Remove newly introduced __dev* annotations lp8727_charger: Small cleanup in naming ab8500_btemp: Demote initcall sequence ds2782_battery: Add power_supply_changed() calls for proper uevent support power: Add battery driver for goldfish emulator u8500-charger: Delay for USB enumeration ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures ab8500-charger: Do not touch VBUSOVV bits ab8500-fg: Use correct battery charge full design pm2301: LPN mode control support pm2301: Enable vbat low monitoring ab8500-bm: Flush all work queues before suspending ab8500-fg: Go to INIT_RECOVERY when charger removed ab8500-charger: Add support for autopower on AB8505 and AB9540 abx500-chargalg: Add new sysfs interface to get current charge status ... Fix up fairly straightforward conflicts in the ab8500 driver. But since it seems to be ARM-specific, I can't even compile-test the result..
2013-02-03power/reset: Remove newly introduced __dev* annotationsThierry Reding
__devinit, __devexit and __devexit_p have recently been removed and should no longer be used. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-20qnap-poweroff: Fix license stringAndrew Lunn
GPLv2+ is not a valid license string. Replace it with one that is. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-09Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-06power/reset: Add a new driver implementing 'power off by restarting'Andrew Lunn
Some devices, Buffalo Linkstation LS-XHL and LS-CHLv2 for example, power-off by restarting to letting u-boot hold the SoC until the user presses a key. Add a generic driver to implement this. It binds a function to pm_power_off, which calls arm_pm_restart. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-06power/reset: Add a new driver to turn QNAP board power offAndrew Lunn
The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-06Power: gpio-poweroff: Fix documentation and gpio_is_validAndrew Lunn
Improve the documentation to clarify level vs edge triggered power off. Improve the comments for level vs edge triggered power off. Make use of gpio_is_valid(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-03Drivers: power: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-24power: Add simple poweroff-gpio driverJamie Lentin
Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>