summaryrefslogtreecommitdiff
path: root/drivers/scsi/bnx2fc
AgeCommit message (Collapse)Author
2013-05-02[SCSI] bnx2fc: Bumped version to 1.0.14Bhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] bnx2fc: Update copyright datesBhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] bnx2fc: Fix race condition between IO completion and abortBhanu Prakash Gollapudi
When IO is successfully completed while an abort is pending, eh_abort incorrectly assumes that abort failed and performes recovery by issuing cleanup. Howerver, cleanup timesout as the firmware has no clue about this IO. Fix this by checking if the IO has already completed. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] bnx2fc: Include chip number in the symbolic nameBhanu Prakash Gollapudi
[jejb: move PCI_DEVICE_ID definitions to include/pci_ids.h] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] bnx2fc: Enable cached tasks to improve performanceBhanu Prakash Gollapudi
Set perf_config to 3 during firmware initialization to enable both cached connections as well as cached tasks. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-25bnx2x, bnx2fc: Use per port max exchange resourcesBhanu Prakash Gollapudi
The firmware supports a maximum of 4K FCoE exchanges. In 4-port devices, or when working in multi-function mode, this resource needs to be distributed between the various possible FCoE functions. This information needs to be calculated by bnx2x and propagated into bnx2fc via cnic. bnx2fc can then use this value to calculate corresponding xid resources instead of using global constants. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25bnx2fc: Make the fcoe_cltr the SCSI host parentRobert Love
The fcoemon userspace daemon is searching for the a hostX under the the /sys/bus/fcoe/devices/ctlrX/ entries. When interfaces created using fcoe_sysfs and fcoe.ko this linkage is setup correctly, but bnx2fc is not doing the same thing and therefore fcoemon does not create the fcoe interface for bnx2fc. This patch sets up the correct linkage for bnx2fc such that fcoemon will work correctly with fcoe_sysfs and bnx2fc. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: adjust duplicate testJulia Lawall
Delete successive tests to the same location. The code tested the result of a previous allocation, that itself was already tested. It is changed to test the result of the most recent allocation. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Bumped version to 1.0.13Bhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Support max IO size to 512KBBhanu Prakash Gollapudi
Increase max_sectors from 512 to 1024 in order to support max IO size of 512KB. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Tx/Rx byte counts reset to 0 when exceeding 32 bit valuesBhanu Prakash Gollapudi
Since the FW counters are 32-bit, accumulate the stats in the driver. [jejb: fix checkpatch warning] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Map the doorbell register between offload and enable requestsBhanu Prakash Gollapudi
We used to map doorbell register after FW enable request is complete. This causes a race condition when unsolicited event is received, and FW sends a CQE for it. Since the doorbell is not mapped, driver does not arm CQ, which means FW will not notify the driver for further CQ completions. To resolve this, map the doorbell between offload and enable, so that driver is ready to receive the unsolicited packets and arm the CQ as soon as FW enable is performed. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Move offload/upload wait logic into a functionBhanu Prakash Gollapudi
Moved the 'waiting for upload/offload completion' logic to respective functions as it is called in multiple places. Also this is done in preperation for the next patch. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: support software fcoe targetBhanu Prakash Gollapudi
Software FCoE target always advertises RETRY bit even when there are no tape LUNs behind the target. This causes the driver to enable FW support for sequence level error recovery and perform REC/SRR. This patch arrests the behavior by not enabling SLER feature for this target. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Remove potential NULL dereferenceJulia Lawall
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: remove useless calls to memset().Cyril Roelandt
These calls are followed by calls to memcpy() on the same memory area, so they can be safely removed. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-03Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-14bnx2fc: use fcoe_get_lesb/fcoe_ctlr_get_lesb() directly from libfcoeYi Zou
Drop the bnx2fc_xxx versions as they are basically the same. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14bnx2fc: use fcoe_link_speed_update() from the exported symbol in libfcoeYi Zou
We have fcoe_link_speed_update() in libfcoe ready for use now, take out the bnx2fc version which is almost the same. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14bnx2fc: add support to get_netdev for bnx2f_interfaceYi Zou
Adds support to fcoe_port's newly added get_netdev fucntion pointer for bnx2fc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14bnx2fc: Use the fcoe_sysfs control interfaceRobert Love
This patch adds support for the new fcoe_sysfs control interface to bnx2fc.ko. It keeps the deprecated interface in tact and therefore either the legacy or the new control interfaces can be used. A mixed mode is not supported. A user must either use the new interfaces or the old ones, but not both. The fcoe_ctlr's link state is now driven by both the netdev link state as well as the fcoe_ctlr_device's enabled attribute. The link must be up and the fcoe_ctlr_device must be enabled before the FCoE Controller starts discovery or login. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-19treewide: fix typo of "suppport" in various commentsMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-03Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-24[SCSI] Fix incorrect memset in bnx2fc_parse_fcp_rspAndi Kleen
gcc 4.8 warns because the memset only clears sizeof(char *) bytes, not the whole buffer. Use the correct buffer size and clear the whole sense buffer. /backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c: In function 'bnx2fc_parse_fcp_rsp': /backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c:1810:41: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess] memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer)); ^ Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-01scsi: fix various printk and comment typosMasanari Iida
Correct spelling typo within drivers/scsi Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-25Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...
2012-07-20[SCSI] bnx2fc: Bumped version to 1.0.12Bhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] bnx2fc: use list_entry instead of explicit castBhanu Prakash Gollapudi
Use list_for_each_entry_safe() instead of explicit cast to avoid relying on struct layout Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] bnx2fc: Improve error recovery by handling parity errorsBhanu Prakash Gollapudi
During parity errors, the ramrods are not issued to FW. bnx2fc waits for the timeout value, and proceeds with cleaning up the IOs. Since we are already out-of-sync with FW, cleanup commands timeout too, and do not get the completion. This operation takes 36 secs for each session to upload causing huge delays. To fix this, bnx2fc now gets a PARITY_ERROR from cnic driver, and upon failure, the driver does not issue any commands to the FW and finishes the upload process sooner. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] bnx2fc: Support interface creation on non-VLAN interface also.Bhanu Prakash Gollapudi
bnx2fc had an assumption that the fcoe interface will always start on the vlan dev. However, some switch implementations (Eg., HP virtual connect FlexFabric) expects the fcoe interface to be started on physical interface. Do not error out if the netdev is not a vlan dev. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] bnx2fc: Reduce object size by consolidating formatsJoe Perches
Deduplication of formats and consolidating tests makes the object much smaller. Add bnx2fc_debug.c, add functions for a few logging functions (BNX2FC_IO_DBG, BNX2FC_TGT_DBG, BNX2FC_HBA_DBG). Use printf extension %pV. Add and use pr_fmt and pr_<level>. Move the debug #include below structure definitions. $ size drivers/scsi/bnx2fc/built-in.o* text data bss dec hex filename 101563 1165 24976 127704 1f2d8 drivers/scsi/bnx2fc/built-in.o.new 138473 1109 33400 172982 2a3b6 drivers/scsi/bnx2fc/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] bnx2fc: use kthread_create_on_nodeEric Dumazet
Since bnx2fc_percpu_thread_create() creates percpu kthread, it makes sense to use kthread_create_on_node() to get proper NUMA affinity for kthread stack. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libfc, fcoe, bnx2fc: cleanup fcoe_dev_statsVasu Dev
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-27bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski
advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-23[SCSI] fcoe, bnx2fc, libfcoe: SW FCoE and bnx2fc use FCoE SyfsRobert Love
This patch has the SW FCoE driver and the bnx2fc driver make use of the new fcoe_sysfs API added earlier in this patch series. After this patch a fcoe_ctlr_device is allocated with private data in this order. +------------------+ +------------------+ | fcoe_ctlr_device | | fcoe_ctlr_device | +------------------+ +------------------+ | fcoe_ctlr | | fcoe_ctlr | +------------------+ +------------------+ | fcoe_interface | | bnx2fc_interface | +------------------+ +------------------+ libfcoe also takes part in this new model since it discovers and manages fcoe_fcf instances. The memory allocation is different for FCFs. I didn't want to impact libfcoe's fcoe_fcf processing, so this patch creates fcoe_fcf_device instances for each discovered fcoe_fcf. The two are paired using a (void * priv) member of the fcoe_ctlr_device. This allows libfcoe to continue maintaining its list of fcoe_fcf instances and simply attaches and detaches them from existing or new fcoe_fcf_device instances. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23[SCSI] bnx2fc: Allocate fcoe_ctlr with bnx2fc_interface, not as a memberRobert Love
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct bnx2fc_interface. This causes problems when when later patches attempt to use the new fcoe_sysfs APIs which allow us to allocate the bnx2fc_interface as private data to a fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data will contain the fcoe_ctlr and its private data will be the bnx2fc_interface. +-------------------+ | fcoe_ctlr_device | +-------------------+ | fcoe_ctlr | +-------------------+ | bnx2fc_interface | +-------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22[SCSI] bnx2fc: Bumped version to 1.0.11Bhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22[SCSI] bnx2fc: cleanup task management IO when it times out.Bhanu Prakash Gollapudi
When the task management IO times out, or a flush operation is performed while task management IO is pending, driver is not cleaning up the IO. This patch cleans up the IO for the above cases. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22[SCSI] bnx2fc: Decrememnt io ref count when abort times outBhanu Prakash Gollapudi
When IO abort times out during eh_abort or a flush operation is performed while abort is pending, the driver is not cleaning up the IO and thus not reducing the IO reference count. With this change, as part of explicit logout, the IO is cleaned up. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22[SCSI] bnx2fc: Allow FLOGI to be retried when receiving bad responses.Bhanu Prakash Gollapudi
Commit 907c07d45199f954ddcf66c2c9763c87d012cb15 added more cases to do FLOGI retry on receiving bad response. Remove the code that drops the packet and allow the stack to handle bad FLOGI response. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] bnx2fc: Remove bh disable in softirq contextNeil Horman
As with the fcoe sw transport, the bnx2fc packet handler function runs only in softirq context. Theres no need to disable bottom halves here Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) L2TP doesn't get autoloaded when you try to open an L2TP socket due to a missing module alias, fix from Benjamin LaHaise. 2) Netlabel and RDS should propagate gfp flags given to them by callers, fixes from Dan Carpeneter. 3) Recursive locking fix in usbnet wasn't bulletproof and can result in objects going away mid-flight due to races, fix from Ming Lei. 4) Fix up some confusion about a bool module parameter in netfilter's iptable_filter and ip6table_filter, from Rusty Russell. 5) If SKB recycling is used via napi_reuse_skb() we end up with different amounts of headroom reserved than we had at the original SKB allocation. Fix from Eric Dumazet. 6) Fix races in TG3 driver ring refilling, from Michael Chan. 7) We have callbacks for IPSEC replay notifiers, but some call sites were not using the ops method and instead were calling one of the implementations directly. Oops. Fix from Steffen Klassert. 8) Fix IP address validation properly in the bonding driver, the previous fix only works with netlink where the subnet mask and IP address are changed in one atomic operation. When 'ifconfig' ioctls are used the IP address and the subnet mask are changed in two distinct operations. Fix from Andy Gospodarek. 9) Provide a sky2 module operation to work around power management issues with some BIOSes. From Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: usbnet: consider device busy at each recieved packet bonding: remove entries for master_ip and vlan_ip and query devices instead netfilter: remove forward module param confusion. usbnet: don't clear urb->dev in tx_complete usbnet: increase URB reference count before usb_unlink_urb xfrm: Access the replay notify functions via the registered callbacks xfrm: Remove unused xfrm_state from xfrm_state_check_space RDS: use gfp flags from caller in conn_alloc() netlabel: use GFP flags from caller instead of GFP_ATOMIC l2tp: enable automatic module loading for l2tp_ppp cnic: Fix parity error code conflict tg3: Fix RSS ring refill race condition sky2: override for PCI legacy power management net: fix napi_reuse_skb() skb reserve
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This contains the usual set of updates and bugfixes to target-core + existing fabric module code, along with a handful of the patches destined for v3.3 stable. It also contains the necessary target-core infrastructure pieces required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre Channel fabric module currently queued in target-pending/for-next-merge, and coming for round 2. The highlights for this series include: - Add target_submit_tmr() helper function for fabric task management (andy) - Convert tcm_fc to use target_submit_tmr() (andy) - Replace target core various cmd flags with a transport state (hch) - Convert loopback to use workqueue submission (hch) - Convert target core to use array_zalloc for tpg_lun_list (joern) - Convert target core to use array_zalloc for device_list (joern) - Add target core support for TMR_ABORT_TASK (nab) - Add target core se_sess->sess_kref + get/put helpers (nab) - Add target core se_node_acl->acl_kref for ->acl_free_comp usage (nab) - Convert iscsi-target to use target_put_session + sess_kref (nab) - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab) - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on exception (nab) - Fix target core up handling of short INQUIRY buffers (roland) - Untangle target-core front-end and back-end meanings of max_sectors attribute (roland) - Set loopback residual field for SCSI commands (roland) - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS emulation (roland) Thanks again to Andy, Christoph, Joern, Roland, and everyone who has contributed this round!" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits) ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception loopback: Fix transport_generic_allocate_tasks error handling iscsi-target: remove improper externs iscsi-target: Remove unused variables in iscsi_target_parameters.c target: remove obvious warnings target: Use array_zalloc for device_list target: Use array_zalloc for tpg_lun_list target: Fix sense code for unsupported SERVICE ACTION IN target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled target: Bump core version to v4.1.0-rc2-ml + fabric versions tcm_fc: Fix fc_exch memory leak in ft_send_resp_status target: Drop unused legacy target_core_fabric_ops API callers iscsi-target: Convert to use target_put_session + sess_kref target: Convert se_node_acl->acl_group removal to use ->acl_kref target: Add se_node_acl->acl_kref for ->acl_free_comp usage target: Add se_node_acl->acl_free_comp for NodeACL release path target: Add se_sess->sess_kref + get/put helpers target: Convert session_lock to irqsave target: Fix typo in drivers/target iscsi-target: Fix dynamic -> explict NodeACL pointer reference ...