Age | Commit message (Collapse) | Author |
|
When issuing I/O we check if rport is online through libfc
rport_lookup() function which needs to be protected by mutex lock that
cannot acquired in I/O context. The change is to use midlayer remote
port s dd_data which is preserved until its devloss timeout and no
protection is required. The the scsi_cmnd error code is expected to be
in the left 16 bits of the result field. Changed to correct this. Fnic
driver version changed from 1.6.0.20 to 1.6.0.21
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LUN reset
In case of LUN reset, the device reset command is issued with one of the
I/Os that has timed out on that LUN. The change is to also return this
I/O with error status set to DID_RESET. In case when the reset is issued
using the sg_reset tool (from sg3_utils) it is a new command and new_sc
is set to 1. Fnic driver version changed from 1.6.0.19 to 1.6.0.20
[mkp: Fixed checkpatch warning]
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If an I/O times out and an abort issued by host, if the abort is
successful we need to set scsi status as DID_ABORT. Or else the
mid-layer error handler which looks for this error code, will offline
the device. Also if the original I/O is not found in fnic firmware, we
will consider the abort as successful. The start_time assignment is
moved because of the new goto. Fnic driver version changed from
1.6.0.17a to 1.6.0.19, version 1.6.0.18 has been skipped
[mkp: Fixed checkpatch warning]
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch moves a printk() outside of the code section where interrupt
are disabled. In some cases a flood of error messages may cause a kernel
panic. It also removes one of the printk()s because the same error
message was printed twice.
[709686.317197] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 12
[709686.317200] CPU: 12 PID: 1963 Comm: systemd-journal Tainted: GF O-------------- 3.10.0-229.el7.x86_64 #1
[709686.317201] Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.6.030620151309 03/06/2015
[709686.317206] ffffffff8182b2e8 00000000392722ba ffff88046fcc5c48 ffffffff81603f36
[709686.317209] ffff88046fcc5cc8 ffffffff815fd7da 0000000000000010 ffff88046fcc5cd8
[709686.317211] ffff88046fcc5c78 00000000392722ba ffff88046fcc5c88 000000000000000c
[709686.317212] Call Trace:
[709686.317221] <NMI> [<ffffffff81603f36>] dump_stack+0x19/0x1b
[709686.317223] [<ffffffff815fd7da>] panic+0xd8/0x1e7
[709686.317227] [<ffffffff8110a760>] ? watchdog_enable_all_cpus.part.2+0x40/0x40
[709686.317229] [<ffffffff8110a822>] watchdog_overflow_callback+0xc2/0xd0
[709686.317233] [<ffffffff8114c901>] __perf_event_overflow+0xa1/0x250
[709686.317235] [<ffffffff8114d404>] perf_event_overflow+0x14/0x20
[709686.317239] [<ffffffff810301fd>] intel_pmu_handle_irq+0x1fd/0x410
[709686.317242] [<ffffffff811908d1>] ? unmap_kernel_range_noflush+0x11/0x20
[709686.317246] [<ffffffff81373574>] ? ghes_copy_tofrom_phys+0x124/0x210
[709686.317249] [<ffffffff8160cfcb>] perf_event_nmi_handler+0x2b/0x50
[709686.317251] [<ffffffff8160c719>] nmi_handle.isra.0+0x69/0xb0
[709686.317252] [<ffffffff8160c830>] do_nmi+0xd0/0x340
[709686.317256] [<ffffffff8160bb71>] end_repeat_nmi+0x1e/0x2e
[709686.317260] [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317263] [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317265] [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317269] <<EOE>> [<ffffffff8132c297>] ? vgacon_scroll+0x2d7/0x330
[709686.317273] [<ffffffff813a086c>] scrup+0xfc/0x110
[709686.317275] [<ffffffff813a0920>] lf+0xa0/0xb0
[709686.317278] [<ffffffff813a1b32>] vt_console_print+0x2d2/0x420
[709686.317283] [<ffffffff8106f4a1>] call_console_drivers.constprop.15+0x91/0xf0
[709686.317287] [<ffffffff8107069f>] console_unlock+0x3bf/0x400
[709686.317291] [<ffffffff81070996>] vprintk_emit+0x2b6/0x530
[709686.317294] [<ffffffff815fd961>] printk_emit+0x44/0x5b
[709686.317297] [<ffffffff81070d98>] devkmsg_writev+0x158/0x1d0
[709686.317303] [<ffffffff811c5ef9>] do_sync_readv_writev+0x79/0xd0
[709686.317307] [<ffffffff811c73ee>] do_readv_writev+0xce/0x260
[709686.317310] [<ffffffff811c8d18>] ? __sb_start_write+0x58/0x110
[709686.317314] [<ffffffff811c7615>] vfs_writev+0x35/0x60
[709686.317318] [<ffffffff811c776c>] SyS_writev+0x5c/0xd0
[709686.317322] [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags. We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
the kernel prints some warnings when compiled with CONFIG_DMA_API_DEBUG.
This is because the fnic driver doesn't check the return value of
pci_map_single().
[ 11.942770] scsi host12: fnic
[ 11.950811] ------------[ cut here ]------------
[ 11.950818] WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x920()
[ 11.950821] fnic 0000:0c:00.0: DMA-API: device driver failed to check map error[device address=0x0000002020a30040] [size=44 bytes] [mapped as single]
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed By: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
fnic_queuecommand() to avoid deadloack
We added changes in fnic driver patch 1.6.0.16 to acquire
io_req_lock in fnic_queuecommand() before issuing I/O so that io completion
is serialized. But when releasing the lock we check for the I/O flag and
this could be modified if IO abort occurs before I/O completion. In this case
we wont release the lock and causes deadlock in some scenerios. Using the
local variable to check the IO lock status will resolve the problem.
Fixes: 41df7b02db82cf6c14f094757bac3830d10a827f
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
|
|
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.
The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.
Also add:
- <linux/init.h> to <linux/io.h>
- <asm/pgtable_types> to <asm/io.h>
... which were two other implicit header file dependencies.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ]
Acked-by: David Miller <davem@davemloft.net>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Colin Cross <ccross@android.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When I/O is aborted by mid-layer, fnic FW will complete the I/O before
completing the abort task. In some cases abort request is completed before
the I/O, which could lead to inconsistent driver and firmware states.
In this case firmware reset would clear the inconsistent state.
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Since we got rid of ordered tag support in 2010 the prime use case of
switching on and off ordered tags has been obsolete. The other function
of enabling/disabling tagging entirely has only been correctly implemented
by the 53c700 driver and isn't generally useful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.
Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
|
|
When issuing I/O request, if the I/O completes before returning from
fnic_queuecommand(), we may be referencing scsi_cmnd structure that may
be freed by interrupt handler. Acquring IO lock would synchronize
fnic_queuecommand and interrupt handler.
- Increment fnic version from 1.6.0.15 to 1.6.0.16
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
the link is down
When physical link between standalone C series and switch is down,
the fip timer is not turned off and timer expiration will keep sending
vlan request.
It can be fixed by stopping the fip_timer and
it will be restarted automatically when Link is up.
- Increment fnic version from 1.6.0.14 to 1.6.0.15
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
IOs belonging to an rport are aborted with Internal terminate option
when rport goes offline. Any new IO issued to the rport during this
time can reuse the terminated exchange which will cause inconsistent
state of the exchange between local port and remote port.
fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by
libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set,
will avoid inconsistent state of the exchange between local port and
remote port.
- Increment fnic version from 1.6.0.13 to 1.6.0.14
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In case of receive path, we do not have eth header or fcoe header available
when we take a trace so we fill the fc trace buffer with 0xff for both
values. We copy only mimimum of received data or trace buffer size -
fc header - eth and fcoe header
- Increment fnic version from 1.6.0.12 to 1.6.0.13
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In fnic_dev_wait, Wait for finish to complete at least three times in two
seconds while loop before returning -ETIMEDOUT as sometime
schedule_timeout_uninterruptible takes more than two seconds to wake up.
- Increment fnic version from 1.6.0.11 to 1.6.0.12
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we also get proper values in cmd->request->tag for untagged
commands, there is no need to force tagged_supported to on in drivers
that need host-wide tags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth. For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.
Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway. The one other case looks
broken, but I've kept the behavior as-is for now.
Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.
Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq. This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Unless we want to build a SPI tag message we should just check SCMD_TAGGED
instead of reverse engineering a tag type through the use of
scsi_populate_tag_msg.
Also rename the function to spi_populate_tag_msg, make it behave like the
other spi message helpers, and move it to the spi transport class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Most drivers use exactly the same implementation, so provide it as a
library function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This patch set consists of the usual driver updates (megaraid_sas,
arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
assorted fixes and miscellaneous updates (including the
pci_msix_enable_range() changes that have been pending for a while)"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits)
scsi: add a CONFIG_SCSI_MQ_DEFAULT option
ufs: definitions for phy interface
ufs: tune bkops while power managment events
ufs: Add support for clock scaling using devfreq framework
ufs: Add freq-table-hz property for UFS device
ufs: Add support for clock gating
ufs: refactor configuring power mode
ufs: add UFS power management support
ufs: introduce well known logical unit in ufs
ufs: manually add well known logical units
ufs: Active Power Mode - configuring bActiveICCLevel
ufs: improve init sequence
ufs: refactor query descriptor API support
ufs: add voting support for host controller power
ufs: Add clock initialization support
ufs: Add regulator enable support
ufs: Allow vendor specific initialization
scsi: don't add scsi_device if its already visible
scsi: fix the type for well known LUs
scsi: fix comment in struct Scsi_Host definition
...
|
|
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent
to correct Mac address for VLAN Discovery otherwise VLAN request will be
sent to invalid address hence FLOGI never happens.
2) Simplify the copy_and_format_trace_data code and log the correct Link event
for fnic control path tracing in case of link status UP->UP.
3) Increment Fnic driver version
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch fix spelling typo in printk.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: "Suma Ramars (sramars)" <sramars@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Current the midlayer fakes up a struct request for the explicit reset
ioctls, and those don't have a tag allocated to them. The fnic driver pokes
into midlayer structures to paper over this design issue, but that won't
work for the blk-mq case.
Either someone who can actually test the hardware will have to come up with
a similar hack for the blk-mq case, or we'll have to bite the bullet and fix
the way the EH ioctls work for real, but until that happens we fail these
explicit requests here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Webb Scales <webbnh@hp.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Robert Elliott <elliott@hp.com>
Cc: Hiral Patel <hiralpat@cisco.com>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Brian Uchino <buchino@cisco.com>
|
|
The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.
So update the linux SCSI stack to use 64-bit LUN numbers.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc. It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In fnic abort handler, abort queuing can be failed when hardware queue is full.
The command state is left as abort queued. The command with abort queued state
will never be queued next time for abort or termiantion.
Fix restores the command state in above case.
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch contains following three minor fixes.
1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
expected, setting the internal fip state to Non FIP mode explicitly, avoids
sending FIP frame.
2) When target goes offline, all outstanding IOs belong to the target will be
terminated by driver, If the termination count is high, then it influences
firmware responsiveness. To improve the responsiveness, default IO throttle
count is reduced to 256.
3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
receiving flogi reject from switch. As CVL clears all FCFs.
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Anantha Tungarakodi <atungara@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
|
|
Pull Request for 3.13 for FCOE tree.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
This feature gathers active and cumulative per fnic stats for io,
abort, terminate, reset, vlan discovery path and it also includes
various important stats for debugging issues. It also provided
debugfs and ioctl interface for user to retrieve these stats.
It also provides functionality to reset cumulative stats through
user interface.
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Fixed appropriate error codes that returns negative error number on failure,
and 0 on success. fnic_reset() is used directly by the fc transport callback
issue_fc_host_lip which requires a negative error number on failure.
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Preliminary to removing compare_ether_addr altogether:
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
Done via cocci script:
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
|
|
Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Introduced module params to provide dynamic way of configuring
queue depth.
Added support to get max io throttle count through UCSM to
configure maximum outstanding IOs supported by fnic and push
that value to scsi mid-layer.
Supported IO throttle values:
UCSM IO THROTTLE VALUE FNIC MAX OUTSTANDING IOS
------------------------------------------------------
16 (Default) 2048
<= 256 256
> 256 <ucsm value>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Kernel panics due to NULL lport while executing the log message because
of synchronization issues between libfc and scsi transport fc. Checking
for NULL pointers at the beginning of this routine would resolve the issue
from kernel panic point of view.
Signed-off-by: Sesidhar Baddel <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset in case of
timing issue and also to some extent locking issue where abts and terminate
is happening around same timing.
The code changes are intended to update CMD_STATE(sc) and
io_req->abts_done together.
Signed-off-by: Sesidhar Beddel <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Remove fnic driver QUEUE_FULL handling code instead let SCSI mid layer
handle queue full and use its algorithm to ramp down/up queue
Signed-off-by: Suma Ramars <sramars@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Issue was seen when SCSI buffer address is more than 40 bits in system
with more than 1.1TB RAM. When SCSI buffer is passed to VIC, it is failing
to map to correct buffer address, as DMA mask is set to 40 bits in driver
initialization. Corrected DMA_MASK from 40-bits to 64-bits to avoid masking
41-64 bits addresses.
Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Code to reset fc_host statistics.
echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats,
the code also issues command to fnic firmware to clear vnic stats.
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
I hit this during driver probe with the latest fnic updates (this trace
is from a backport into a distro kernel, but the issue is the same).
> BUG: sleeping function called from invalid context at mm/slab.c:3113
> in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu
> INFO: lockdep is turned off.
> irq event stamp: 0
> hardirqs last enabled at (0): [<(null)>] (null)
> hardirqs last disabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last enabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last disabled at (0): [<(null)>] (null)
> Pid: 610, comm: work_for_cpu Not tainted
> Call Trace:
> [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0
> [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130
> [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
> [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic]
> [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic]
> [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30
> [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20
> [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30
> [<ffffffff8109cdc6>] ? kthread+0x96/0xa0
> [<ffffffff8100c1ca>] ? child_rip+0xa/0x20
> [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40
> [<ffffffff8100bb10>] ? restore_args+0x0/0x30
> [<ffffffff8109cd30>] ? kthread+0x0/0xa0
> [<ffffffff8100c1c0>] ? child_rip+0x0/0x20
The problem is in this hunk of "FIP VLAN Discovery Feature Support"
(d3c995f1dcf938f1084388d92b8fb97bec366566)
create_singlethreaded_workqueue cannot be called with irqs disabled
@@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev
*pdev,
vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
+ fnic->set_vlan = fnic_set_vlan;
fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO);
+ setup_timer(&fnic->fip_timer, fnic_fip_notify_timer,
+ (unsigned long)fnic);
+ spin_lock_init(&fnic->vlans_lock);
+ INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
+ INIT_WORK(&fnic->event_work, fnic_handle_event);
+ skb_queue_head_init(&fnic->fip_frame_queue);
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ if (!fnic_fip_queue) {
+ fnic_fip_queue =
+ create_singlethread_workqueue("fnic_fip_q");
+ if (!fnic_fip_queue) {
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ printk(KERN_ERR PFX "fnic FIP work queue "
+ "create failed\n");
+ err = -ENOMEM;
+ goto err_out_free_max_pool;
+ }
+ }
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+ INIT_LIST_HEAD(&fnic->evlist);
+ INIT_LIST_HEAD(&fnic->vlans);
} else {
shost_printk(KERN_INFO, fnic->lport->host,
"firmware uses non-FIP mode\n");
The attempts to make fnic_fip_queue a single instance for the driver
while it's being created in probe look awkward anyway, why is this not
created in fnic_init_module like the event workqueue?
Signed-off-by: Chris Leech <cleech@redhat.com>
Tested-by: Anantha Tungarakodi <atungara@cisco.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Pull first round of SCSI updates from James Bottomley:
"The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas,
megaraid_sas, bfa, ipr) and a few bug fixes. Also of note is that the
Buslogic driver has been rewritten to a better coding style and 64 bit
support added. We also removed the libsas limitation on 16 bytes for
the command size (currently no drivers make use of this)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
[SCSI] megaraid: minor cut and paste error fixed.
[SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call
[SCSI] ufs: fix register address in UIC error interrupt handling
[SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[]
[SCSI] ufs: use devres functions for ufshcd
[SCSI] ufs: Fix the response UPIU length setting
[SCSI] ufs: rework link start-up process
[SCSI] ufs: remove version check before IS reg clear
[SCSI] ufs: amend interrupt configuration
[SCSI] ufs: wrap the i/o access operations
[SCSI] storvsc: Update the storage protocol to win8 level
[SCSI] storvsc: Increase the value of scsi timeout for storvsc devices
[SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver
[SCSI] BusLogic: Port driver to 64-bit.
[SCSI] BusLogic: Fix style issues
[SCSI] libiscsi: Added new boot entries in the session sysfs
[SCSI] aacraid: Fix for arrays are going offline in the system. System hangs
[SCSI] ipr: IOA Status Code(IOASC) update
[SCSI] sd: Update WRITE SAME heuristics
[SCSI] fnic: potential dead lock in fnic_is_abts_pending()
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is an unlock missing if the == FNIC_IOREQ_ABTS_PENDING is
false.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
When you copy some code, you are supposed to read it. If nothing else,
there's a chance to spot and fix an obvious bug instead of sharing it...
X-Song: "I Got It From Agnes", by Tom Lehrer
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Tom Lehrer? You're dating yourself, Al ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|