summaryrefslogtreecommitdiff
path: root/drivers/scsi/hisi_sas
AgeCommit message (Collapse)Author
2016-01-08hisi_sas: Use u64 for qw0 in free_device_v1_hw()John Garry
By reading in itct.qw0 into a 32b variable the top 32 bits were being lost. In practice this was OK as they were zeroes. Fixes: 27a3f229 ("hisi_sas: Add cq interrupt") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-08hisi_sas: Fix typo in setup_itct_v1_hw()John Garry
We were doing a arithmetic comparison instead of logical shift by accident. Mis-programming the itct did not seem to make a difference to operation. Fixes: abda97c2fe874 ("hisi_sas: Add dev_found") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-08hisi_sas: Fix v1 itct masksJohn Garry
The mask fields are for quad-words, so add ULL suffix. Also unreferenced ITCT_HDR_BREAK_REPLY and ITCT_HDR_MAX_BURST are removed. Fixes: 50af155b6c ("hisi_sas: Add v1 hardware reg") Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-17hisi_sas: use platform_get_irq()John Garry
It is preferred that drivers use platform_get_irq() instead of irq_of_parse_and_map(), so replace. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-10hisi_sas: fix error codes in hisi_sas_task_prep()Dan Carpenter
There were a couple cases where the error codes weren't set and also I changed the success return to "return 0;" which is the same as "return rc;" but more explicit. Fixes: 42e7a69368a5 ('hisi_sas: Add ssp command functio') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Remove dependency on of_irq_countJohn Garry
Originally the driver would use of_irq_count to calculate how much memory is required for storing the interrupt names, since the number of interrupt sources for the controller is variable. Since of_irq_count cannot be used by the driver, use fixed names. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add fatal irq handlerJohn Garry
Add handlers for fatal interrupts. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add control phy handlerJohn Garry
Add method for lldd_control_phy. Currently link rate control and spinup hold is unsupported. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add tmf methodsJohn Garry
Add function methods for tmf's. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add scan finished and startJohn Garry
Add functions for scsi host template scan_finished and scan_start methods. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add smp protocol supportJohn Garry
Add support for smp function, which allows devices attached by expander to be controlled. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add bcast interrupt handlerJohn Garry
This is for expander broadcast event. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add abnormal irq handlerJohn Garry
Add abnormal irq handler. This handler is concerned with phy down event. Also add port formed and port deformed handlers. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add dev_found and dev_goneJohn Garry
Add functions to deal with lldd_dev_found and lldd_dev_gone. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add cq interrupt handlerJohn Garry
Add cq interrupt handler and also slot error handler function. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add ssp command functionJohn Garry
Add path to send ssp command to HW. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add path from phyup irq to SAS frameworkJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add v1 hardware interrupt initJohn Garry
Add code to interrupts, so now we can get a phy up interrupt when a disk is connected. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add v1 hardware initialisation codeJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add v1 hardware register definitionsJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add v1 hw module initJohn Garry
Add module init code for v1 hw. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add timer and spinlock initJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add phy and port initJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add hisi sas device typeJohn Garry
Include initialisation. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add hisi_hba workqueueJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Set dev DMA maskJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add phy SAS ADDR initializationJohn Garry
The SAS address for the HBA comes from the device tree. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add cq structure initializationJohn Garry
Each completion queue has a structure. This is mainly for passing to irq handler so we know which queue the irq occured on. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add slot init codeJohn Garry
Add functionality to init slot indexing. Slot indexing is for the host to track which slots (or tags) are free and which are used. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add hisi_sas_removeJohn Garry
This patch also includes relevant memory/pool freeing and sas/scsi host removal. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Allocate memories and create poolsJohn Garry
Allocate DMA and non-DMA memories for the controller. Also create DMA pools. These include: - Delivery queues - Completion queues - Command status buffer - Command table - ITCT (For device context) - Host slot info - IO status - Breakpoint - host slot indexing - SG data - FIS - interrupts names Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add HW DMA structuresJohn Garry
Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Scan device treeJohn Garry
Scan the device tree for all properties. Also do this: - do ioremap for SAS registers - allocate memory for interrupt names Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add scsi host registrationJohn Garry
Add functionality to register device as a scsi host. The SAS domain transport ops are empty at this point. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-26hisi_sas: Add initial bare main driverJohn Garry
This patch adds the initial bare main driver for the HiSilicon SAS HBA. This only introduces the changes to build and load the main driver module. The complete driver consists of the core main module and also a module platform driver for driving the hw. The HBA is a platform device. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v0.10.2 at 2024-07-27 09:36:40 (GMT)