summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt2sas
AgeCommit message (Collapse)Author
2013-02-24[SCSI] mpt2sas: Add support for OEM specific controllerSreekanth Reddy
Defined SSDID & HW vendor brand strings. Added entries for SSDID within the function that prints the brand string. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] mpt2sas: fix for driver fails EEH, recovery from injected pci bus errorSreekanth Reddy
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. [thenzl: add a 'non_operational_loop' reset.] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-03Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-03Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-02Merge SCSI misc branch into isci-for-3.6 tagJames Bottomley
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-09-24[SCSI] mpt2sas: Add a module parameter that permits overriding protection ↵Martin K. Petersen
capabilities Add a parameter that allows the host protection capabilities mask to be provided at module load time. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: "Sreekanth Reddy" <Sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] mpt2sas: Return the correct sense key for DIF errorsMartin K. Petersen
Only a target device should return ABORTED COMMAND when a PI error is discovered. The HBA should always set the sense key to ILLEGAL REQUEST. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: "Sreekanth Reddy" <Sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] mpt2sas: fix double mutex lock in NON_BLOCKING stateAlexey Khoroshilov
If state is NON_BLOCKING and mutex_trylock is succeed, the control flow goes to mutex_lock_interruptible() that is a deadlock. [jejb: fixed coding style problems] Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: "Sreekanth Reddy" <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-17[SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBAsreekanth.reddy@lsi.com
This patch checks whether HBA is SAS2008 B0 controller. if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts. [jejb: fix whitespace problems] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-07scsi: make pci error handlers constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-24[SCSI] mpt2sas: Bump driver vesion to 14.100.00.00sreekanth.reddy@lsi.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: Fix for With post diag reset same set of device gets added, ↵sreekanth.reddy@lsi.com
removed and then again gets added with new target ids When device discovery is disabled during driver load time using module parameter "disable_discovery=1" and when diag reset is issued then from logs, it is observed that the devices get added, removed and then added with new target ids. So, in order to limit this turn-off the code which is deleting and devices across host reset when the disable_discovery module parameter is turned on. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: Fix for staged device discovery functionality of driver not ↵sreekanth.reddy@lsi.com
working This patch provides a command line option to disable "Port enable" during the driver load. The objective of this command line option is to load the driver and do all the necessary initialization excluding port enable(i.e. delay device discovery) Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas : MPI 2.0 Rev V(2.0.14) specificationsreekanth.reddy@lsi.com
Changeset in MPI 2.0 Rev V(2.0.14) specification 1) Bumped MPI2_HEADER_VERSION_UNIT. 2) Added a product specific range to event values. 3) Added clarification to Direct-Attached SAS PHY Power condition. 4) Updated timing requirements for performing Hard Reset. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: Fix for max_sectors warning message is stating the incorrect ↵sreekanth.reddy@lsi.com
range When specifying the command line option "max_sectors" less than 64, then warning message should provide correct upper boundary value 32767 instead of 8192. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: Provide sysfs attribute to report Backup Rail Monitor Statussreekanth.reddy@lsi.com
A new sysfs shost attribute called "BMR_status" is implemented to report Backup Rail Monitor status. This attribute is located in the path /sys/class/scsi_host/host#/BMR_status when reading this adapter attribute, then driver will output the state of GPIO[24]. It returns "0" if BMR is healthy and it returns "1" for failure. if it returns an empty string then it means that there was an error while obtaining the BMR status. Then check dmesg for what error has occured. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: To include more Intel Brandingsreekanth.reddy@lsi.com
Updating the customer branding string for "SSD 910 Series" controller Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] mpt2sas: 2012 source code copyrightsreekanth.reddy@lsi.com
The Copyright String in all the drivers sources were changed to 2012 Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-22[SCSI] mpt2sas: Fix for Driver oops, when loading driver with ↵sreekanth.reddy@lsi.com
max_queue_depth command line option to a very small value If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@lsi.com> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] core, classes, mpt2sas: have scsi_internal_device_unblock take new stateMike Christie
This has scsi_internal_device_unblock/scsi_target_unblock take the new state to set the devices as an argument instead of always setting to running. The patch also converts users of these functions. This allows the FC and iSCSI class to transition devices from blocked to transport-offline, so that when fast_io_fail/replacement_timeout has fired we do not set the devices back to running. Instead, we set them to SDEV_TRANSPORT_OFFLINE. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-06-06[SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptiblenagalakshmi.nandigama@lsi.com
When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id(). This is because smp_processor_id() is not called in preempt safe condition. To fix this issue, use raw_smp_processor_id instead of smp_processor_id. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> CC: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10[SCSI] mpt2sas: move the scsi_host_put to the right placeTomas Henzl
When scsi_add_host fails the scsi_host_put should be called. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Bump driver vesion to 13.100.00.00nagalakshmi.nandigama@lsi.com
Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Fix for panic happening because of improper memory allocationnagalakshmi.nandigama@lsi.com
The ioc->pfacts member in the IOC structure is getting set to zero following a call to _base_get_ioc_facts due to the memset in that routine. So if the ioc->pfacts was read after a host reset, there would be a NULL pointer dereference. The routine _base_get_ioc_facts is called from context of host reset. The problem in _base_get_ioc_facts is the size of Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60, so there is a four byte overflow resulting from the memset. Also, there is memset in _base_get_port_facts using the incorrect structure, it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> CC: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Fix for hard drive going OFFLINE when hard reset issued and ↵nagalakshmi.nandigama@lsi.com
simultaneously another hard drive is hot unplugged Following the host reset, the firmware discovery is reassigning another hard drive in the topology to the same device handle as that device is getting hot removed. Until the driver device removal routine is called, there will be two hard drive with the matching device handle in the internal device link list. In the device removal routine, a separate function which moves the device from BLOCKED into OFFLINE state. Since this routine is passed with the device handle passed as input parameter, the routine will be traversing the internal device link list searching for matching device handle. This results in two devices with matching device handle, therefore both devices goes OFFLINE. To fix this issue,the input parameter is changed from device handle to SAS address, therefore only the device that is hot unplugged will be placed in OFFLINE state. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Set the phy identifier of the end device to the phy number ↵nagalakshmi.nandigama@lsi.com
of the parent device it is linked to The phy_identifier inside the routine _transport_set_identify() is set to sas_device_page_zero->PhyNum. This returns the phy number of the parent device this device is linked to. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas : While enabling phy, read the current port number from sas ↵nagalakshmi.nandigama@lsi.com
iounit page 0 instead of page 1 The port number is changing after disabling/enabling phys using the SysFS interface This is because the firmware behavour changed where it would read the the port number then set it to some different value even though Auto Port Config is turned on. With this change of behavour in FW, it is possible that the expanders are moved from one port to another after disabling /enabling phys. This is occuring because the port number in sas iounit page 1 is not matching up to the current port in page 0. In order to fix this the driver is modified to read the current port number from sas iounit page 0 instead of page 1. Also copy the port and phy flags over from page 0 to page 1. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Fix linux driver sparse errorsnagalakshmi.nandigama@lsi.com
Fix several endian issues found by runing sparse. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Fix security scan issues reported by source code analysis toolnagalakshmi.nandigama@lsi.com
Modified the source code as per the findings reported by the source code analysis tool. Source code for the following functionalities has been touched. None of the driver functionalities has changed. - SMP Passthrough IOCTL - Debug messages for MPT Replies (i.e. bit 9 of Logging Level) - Task Management using sysfs - Device removal, i.e. when a target device (including any PD within a volume) is removed, and Volume Deletion. - Trace Buffer Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Improvement were made to better protect the sas_device, ↵nagalakshmi.nandigama@lsi.com
raid_device, and expander_device lists There were possible race conditions surrounding reading an object from the link list while from another context in the driver was removing it. The nature of this enhancement is to rearrange locking so the link lists are better protected. Change set: (1) numerous routines were rearranged so spin locks are held through the entire time a link list object is being read from or written to. (2) added new routines for object deletion from link list. Thus ensuring lock was held during the deletion of the link list object, then and memory for object freed outside the lock. The memory was freed outside the lock so driver had access to device object info which was required for notifying the scsi mid layer that a device was getting deleted. (3) added the ioc->blocking_handles parameter. This is a bitmask used to identify which devices need blocking when there is device loss. This was introduced so that lock can be held for the entire time traversing the link list objects, and the bitmask was set to indicate which device handles need blocking. Oustide the lock the ioc->blocking_handles bitmask is traversed, with the respective device handle the scsi mid layer is called for moving devices into blocking state. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas : Perform Target Reset instead of HBA reset when a ↵nagalakshmi.nandigama@lsi.com
SATA_PASSTHROUGH cmd timeout happens Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Added multisegment mode support for Linux BSG Drivernagalakshmi.nandigama@lsi.com
Added support for Block IO requests with multiple segments (vectors) in the SMP handler of the SAS Transport Class. This is required by the BSG driver. Multisegment support added for both, Request and Response. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: Removed redundant global mutex for IOCTLsnagalakshmi.nandigama@lsi.com
When the lock_kernel and unlock_kernel routines were removed in the 2.6.39 kernel, a global mutex was added on top of the existing mutex which already existed. With this implementation, only one IOCTL will be active at any time no matter how many ever controllers are present. This causes poor performance. Removed the global mutex so that the driver can work with the existing semaphore that was already part of the existing code. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] mpt2sas: MPI next revision header updatenagalakshmi.nandigama@lsi.com
Changeset in MPI headers: 1) Bumped MPI2_HEADER_VERSION_UNIT 2) Added 4K sectors supported bit to CapabilitiesFlags field of IOC Page 6. 3) Added UEFIVersion field to BIOS Page 1 and defined additional BiosOptions bits to control UEFI behavior. Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-31Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
2012-03-28[SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revisionSergei Shtylyov
commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision) converted all drivers to use pci_dev->revision. Convert these three drivers which got missed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] mpt2sas: remove extraneous sas_log_info messagesSathisha Nanjappa
This fix ensures that the IOP_LOGINFO_CODE_TASK_TERMINATED messages do not clutter the sas_log_info messages. Bugzilla 42142 - mpt2sas: Number specified in wrong base https://bugzilla.kernel.org/show_bug.cgi?id=42142 Signed-off-by: Sathisha Nanjappa <sathisha.nanjappa@hp.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-02-27PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu
The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-19[SCSI] mpt2sas: spell "primitive" correctly in function prototypeAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] mpt2sas: add missing allocation checkTomas Henzl
The __get_free_pages can fail, so the return value should be checked. Spotted thanks to Stanislaw. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-13[SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex ↵Alexey Khoroshilov
lock-unlock If ioc->pci_error_recovery is set, goto out in mpt2sas_base_hard_reset_handler() leads to unlock unheld ioc->reset_in_progress_mutex. The patch fixes the issue by jumping afer mutex_unlock() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-03Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply patch to a newer code (namely drivers/gpu/drm/gma500/psb_intel_lvds.c)
2012-02-03mpt2sas: Fix typo in mpt2sas_config.cMasanari Iida
Correct spelling "mappping" to "mapping" in drivers/scsi/mpt2sas/mpt2sas_config.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15[SCSI] mpt2sas: Removed redundant calling of _scsih_probe_devices() from ↵nagalakshmi.nandigama@lsi.com
_scsih_probe Removed redundant calling of _scsih_probe_devices() from _scsih_probe as it is getting called from _scsih_scan_finished. Also moved the function scsi_scan_host(shost) to get called after the volumes on warp drive are reported to the OS. Otherwise by the time the (ioc->hide_drives) flags is set, the volumes on warp drive are reported to the OS already. Also modified the initialization of reply queues only in case of driver load time in the function _base_make_ioc_operational(). Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] mpt2sas: Remove unused duplicate diag_buffer_enable paramRoland Dreier
Commit 921cd8024b90 ("[SCSI] mpt2sas: New feature - Fast Load Support") moved handling of the diag_buffer_enable module parameter from mpt2sas_base.c to mpt2sas_scsih.c, but it left an old copy of the parameter in mpt2sas_base.c. Remove the unused stub. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] mpt2sas: Fix possible integer truncation of cpu_countRoland Dreier
When computing reply_queue_count (the number of MSI-X vectors to use), the driver does ioc->reply_queue_count = min_t(u8, ioc->cpu_count, ioc->msix_vector_count); However, on a big machine, ioc->cpu_count could be outside the range that fits in a u8; eg a system with 256 CPUs will end up reply_queue_count set to 0. Fix this by calculating the minimum as ints and then letting the assignment to reply_queue_count handle integer demotion. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>