summaryrefslogtreecommitdiff
path: root/drivers/scsi/mvsas
AgeCommit message (Collapse)Author
2012-07-20[SCSI] mvsas: remove unused variable in mvs_task_exec()Dan Carpenter
We don't use "dev" any more after 07ec747a5f ("libsas: remove ata_port.lock management duties from lldds") and it causes a compile warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] libsas: trim sas_task of slow path infrastructureDan Williams
The timer and the completion are only used for slow path tasks (smp, and lldd tmfs), yet we incur the allocation space and cpu setup time for every fast path task. Cc: Xiangliang Yu <yuxiangl@marvell.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-22Merge tag 'scsi-misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates from James Bottomley: "The update includes the usual assortment of driver updates (lpfc, qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge amount of infrastructure work in the SAS library and transport class as well as an iSCSI update. There's also a new SCSI based virtio driver." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits) [SCSI] qla4xxx: Update driver version to 5.02.00-k15 [SCSI] qla4xxx: trivial cleanup [SCSI] qla4xxx: Fix sparse warning [SCSI] qla4xxx: Add support for multiple session per host. [SCSI] qla4xxx: Export CHAP index as sysfs attribute [SCSI] scsi_transport: Export CHAP index as sysfs attribute [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry [SCSI] pm8001: fix endian issue with code optimization. [SCSI] pm8001: Fix possible racing condition. [SCSI] pm8001: Fix bogus interrupt state flag issue. [SCSI] ipr: update PCI ID definitions for new adapters [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() [SCSI] isci: improvements in driver unloading routine [SCSI] isci: improve phy event warnings [SCSI] isci: debug, provide state-enum-to-string conversions [SCSI] scsi_transport_sas: 'enable' phys on reset [SCSI] libsas: don't recover end devices attached to disabled phys [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata [SCSI] libsas: set attached device type and target protocols for local phys ...
2012-03-20scsi: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-02-29[SCSI] libsas: async ata scanningDan Williams
libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix sas_find_local_phy(), take phy referencesDan Williams
In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: remove ata_port.lock management duties from llddsDan Williams
Each libsas driver (mvsas, pm8001, and isci) has invented a different method for managing the ap->lock. The lock is held by the ata ->queuecommand() path. mvsas drops it prior to acquiring any internal locks which allows it to hold its internal lock across calls to task->task_done(). This capability is important as it is the only way the driver can flush task->task_done() instances to guarantee that it no longer has any in-flight references to a domain_device at ->lldd_dev_gone() time. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: introduce sas_drain_work()Dan Williams
When an lldd invokes ->notify_port_event() it can trigger a chain of libsas events to: 1/ form the port and find the direct attached device 2/ if the attached device is an expander perform domain discovery A call to flush_workqueue() will only flush the initial port formation work. Currently libsas users need to call scsi_flush_work() up to the max depth of chain (which will grow from 2 to 3 when ata discovery is moved to its own discovery event). Instead of open coding multiple calls switch to use drain_workqueue() to flush sas work. drain_workqueue() does not handle new work submitted during the drain so libsas needs a bit of infrastructure to hold off unchained work submissions while a drain is in flight. A lldd ->notify() event is considered 'unchained' while a sas_discover_event() is 'chained'. As Tejun notes: "For now, I think it would be best to add private wrapper in libsas to support deferring unchained work items while draining." Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: kill sas_slave_destroyDan Williams
Per commit 3e4ec344 "libata: kill ATA_FLAG_DISABLED" needing to set ATA_DEV_NONE is a holdover from before libsas converted to the "new-style" ata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31[SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 supportRobin H. Johnson
In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage Controller" with "Virtualized Controller Architecture 2.0" really seems to be a Marvell 88SE9485 part, with OCZ firmware/BIOS. Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021] Should work on: - OCZ RevoDrive3 (2x SandForce 2281) - OCZ RevoDrive3 X2 (4x SandForce 2281) - OCZ zDrive R4 CM84 (4x SandForce 2281) - OCZ zDrive R4 CM88 (8x SandForce 2281) - OCZ zDrive R4 RM84 (4x SandForce 2582) - OCZ zDrive R4 RM88 (8x SandForce 2582) All of this because a friend recently bought a OCZ RevoDrive3 and was bitten by the lack of Linux support. Notes from testing: ------------------- - SMART works. - VPD Device Identification is "OCZ-REVODRIVE3" - Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP, with deterministic (non-zero) read after TRIM, but I'm not sure if it works 100% in my testing. - Some of the tuning in the firmware seems to ensure much better performance when in a RAID0 setup than using the two devices seperately. I have not tested booting from the SSD, because all of this was developed and tested remotely from the actual hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-To: Gordon Pritchard <gordp@sfu.ca> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-02[SCSI] isci: export phy events via ->lldd_control_phy()Dan Williams
Allow the sas-transport-class to update events for local phys via a new PHY_FUNC_GET_EVENTS command to ->lldd_control_phy(). Fixup drivers that are not prepared for new enum phy_func values, and unify ->lldd_control_phy() error codes. These are the SAS defined phy events that are reported in a smp-report-phy-error-log command: * /sys/class/sas_phy/<phyX>/invalid_dword_count * /sys/class/sas_phy/<phyX>/running_disparity_error_count * /sys/class/sas_phy/<phyX>/loss_of_dword_sync_count * /sys/class/sas_phy/<phyX>/phy_reset_problem_count Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: update driver versionXiangliang Yu
This will synchronize the version string with internal driver. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: fixed SMP request watchdog timeout issue.Xiangliang Yu
set SMP link timeout value to maximum. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: expander write performance enhancementXiangliang Yu
with 1 expander, connect 8 HDD, the write performance will be improved by 80%. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: change SL mode0 register valueXiangliang Yu
-- change connection behavior -- set bit8 to 1 for performance tuning -- set bit0 to 0 to enable retry for no_dest reject case. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: fixed wrong destination when hiting NAK for command frameXiangliang Yu
disable non data frame retry Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: fixed some disk spin up issueXiangliang Yu
spin up issue: some direct attached SAS device can't spin up Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: add support for 9480 device idXiangliang Yu
Add support for Marvell 88SE9480 SAS/SATA HBA Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: fix expander link errorXiangliang Yu
Expanders fail to link when the phy rates are mismatched. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-02[SCSI] mvsas: remove mvs_slave_{alloc|configure}Dan Williams
libsas now handles: 1/ limiting ata scanning to lun0 2/ maximizing the queue_depth of sas devices (up to 256, mvsas only supports 64) 3/ changes to /sys/block/<sdX>/device/queue_depth for ata devices Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-09-15Merge branch 'master' into for-nextJiri Kosina
Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
2011-09-15Remove unneeded version.h includes from drivers/scsi/Jesper Juhl
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/scsi/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-27[SCSI] libsas: export sas_alloc_task()Dan Williams
Now that isci has added a 3rd open coded user of this functionality just share the libsas version. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add support for interrupt taskletXiangliang Yu
Add support for interrupt tasklet, which will improve performance. Correct spelling of "20011" [jejb: simplified ifdefs and fixed unused variable problem] Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: update commentsXiangliang Yu
Remove obsolete comments and add new comments Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: misc improvementsXiangliang Yu
Change code to match HBA datasheet. Change code to make it readable. Add support big endian for mvs_prd_imt. Add cpu_to_le32 and cpu_to_le64 to use on addr. Add scan_finished for structure mvs_prv_info. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add new macros and functionsXiangliang Yu
Add new macros: MVS_SOFT_RESET, MVS_HARD_RESET, MVS_PHY_TUNE, MVS_COMMAND_ACTIVE, EXP_BRCT_CHG, MVS_MAX_SG Add new member sg_width in struct mvs_chip_info Use macros rather than magic number Add new functions: mvs_fill_ssp_resp_iu, mvs_set_sense, mvs_94xx_clear_srs_irq, mvs_94xx_phy_set_link_rate Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Remove unused macros, variables and functionsXiangliang Yu
Remove unused macros: VSR_PHY_VS0, VSR_PHY_VS1, MVS_SLOTS, MVS_CAN_QUEUE, MVS_MSI, SG_MX, _MV_DUMP, MV_DISABLE_NCQ Remove unused variables for mvs_info: irq, exp_req, cmd_size Remove unused functions: mvs_get_sas_addr, mvs_hexdump, mvs_hba_sb_dump, mvs_hab_memory_dump, mvs_hba_cq_dump Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: fix 94xx hotplug issueXiangliang Yu
Fix 94xx A0/B0 revision hotplug issue. Remove unused macro: DISABLE_HOTPLUG_DMA_FIX Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add driver version and interrupt coalescing to device ↵Xiangliang Yu
attributes in sysfs Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: add support for 94xx phy tuning and multiple revisionsXiangliang Yu
Add 94xx phy tuning to aid manufacturing. Add support for 94xx multiple revisions: A0, B0, C0, C1, C2. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add support for Non specific NCQ error interruptXiangliang Yu
Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-01[SCSI] mvsas: add support for Task collector mode and fixed relative bugsXiangliang Yu
1. Add support for Task collector mode. 2. Fixed relative collector mode bug: - I/O failed when disks is on two ports - system hang when hotplug disk - system hang when unplug disk during run IO 3. Unlock ap->lock within .lldd_execute_task for direct mode to improve performance Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] mvsas: add support for Marvell 88SE9445/88SE9485Xiangliang Yu
This is support for Marvell 88SE9445/88SE9485 SAS/SATA HBA, which is based on Marvell 88SE9480. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] mvsas: Add support for HighPoint RR27xx series HBAHighPoint Linux Team
This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-17scsi: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-28[SCSI] Unify SAM_ and SAM_STAT_ macrosJames Bottomley
We have two separate definitions for identical constants with nearly the same name. One comes from the generic headers in scsi.h; the other is an enum in libsas.h ... it's causing confusion about which one is correct (fortunately they both are). Fix this by eliminating the libsas.h duplicate Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] mvsas: fix potential NULL dereferenceJiri Slaby
Stanse found that in mvs_abort_task, mvi_dev is dereferenced earlier than tested for being NULL. Move the assignment below the test. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mvsas: fix hot plug handling and IO issuesSrinivas
This patch adds a bunch of fixes 1. Reduce sg table size to 64 (SG_MX) instead of default SG_ALL 2. clear task lists on phy down events 3. release all tasks on port deformation 4. release current task for device gone notification 5. Add sata abort handing 6. Add 10ms delay to each port reset (currently done serially and with interrupts disabled) [jejb: whitespace fixes and clean ups plus added description added dummy 94xx_clear_srs_irq function just to prevent the mismatch in the mvs_dispatch structure killing 94xx cards] Signed-off-by: Srinivas <satyasrinivasp@hcl.in> Cc: Andy Yan <ayan@marvell.com> Cc: qswang@marvell.com Cc: jfeng@marvell.com Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-10[SCSI] mvsas: add support for Adaptec ASC-1045/1405 SAS/SATA HBASrinivas
This is support for Adaptec ASC-1045/1405 SAS/SATA HBA on mvsas, which is based on Marvell 88SE6440 chipset. Signed-off-by: Srinivas <satyasrinivasp@hcl.in> Cc: Andy Yan <ayan@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] mvsas: Support Areca SAS/SATA HBA, ARC-1300/1320Nick Cheng
This is support for Areca SAS/SATA HBA, ARC-1300/1320, which quipped with 88SE6440/88SE9480 respectively. Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw > Cc: Ke Wei <kewei.mv@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-05-23[SCSI] mvsas: remove all the casts from void * or to void *Andy Yan
Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] mvsas: performance improvement using domain_device->lldd_devAndy Yan
Using sticky field to improve retrieve performance by eliminating some lookups in . Remove some spurious casts. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] mvsas: correct bit map usageAndy Yan
Utilize DECLARE_BITMAP to define the tags array. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] mvsas: bug fix, null pointer may be usedAndy Yan
Null pointer check to avoid corruption. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] mvsas: bug fix of dead lockAndy Yan
TMF task should be issued with Interrupt Disabled, or Deadlock may take place. Clean-up unused parameters and conditonal lock. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23[SCSI] mvsas: bug fix with setting task management frame typeAndy Yan
Correct frame type setting according to parameter. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20[SCSI] mvsas: add support for 94xx; layout change; bug fixesAndy Yan
This version contains following main changes - Switch to new layout to support more types of ASIC. - SSP TMF supported and related Error Handing enhanced. - Support flash feature with delay 2*HZ when PHY changed. - Support Marvell 94xx series ASIC for 6G SAS/SATA, which has 2 88SE64xx chips but any different register description. - Support SPI flash for HBA-related configuration info. - Other patch enhanced from kernel side such as increasing PHY type [jejb: fold back in DMA_BIT_MASK changes] Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>