summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2008-12-31Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-29Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-22serial: sh-sci: Fix up port pinmux for SH7366.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.Paul Mundt
sci_poll_put_char() happens to also be used by the serial console, while sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL. Add another gnarly ifdef to shut up the compiler. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Generalize port pin initialization.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Tidy up fifo overrun error handling.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: pr_debug() -> dev_dbg() conversion.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Fix up the cpufreq notifier to use the proper port clock.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Implement CONSOLE_POLL support and kill off old kgdb console.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add support for SH7201 CPU subtype.Peter Griffin
This patch adds support for the SH-2A FPU based SH7201 processor subtype. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22serial: sh-sci: Codestyle cleanup patch.Michael Trimarchi
Trivial coding style cleanups. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-21powerpc/mpc5200: fix error paths in PSC UART probe functionWolfram Sang
- error cases for mapbase and irq were unbundled - mapped irq now gets disposed on error Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21powerpc/mpc5200: add rts/cts handling in PSC UART driverWolfram Sang
Add RTS/CTS-support for the PSC of the MPC5200B. Tested with a Phytec MPC5200B-IO. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21powerpc/mpc5200: Make PSC UART driver update serial errors countersRené Bürgel
This patch adds the capability to the mpc52xx-uart to report framing errors, parity errors, breaks and overruns to userspace. These values may be requested in userspace by using the ioctl TIOCGICOUNT. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-18Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
2008-12-18Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-12-18[ARM] S3C: Remove cpufreq warnings for unset serial informationBen Dooks
As noted by Russell King, do not print any warnings if the uinfo or tty fields are not set when a CPU frequency change is sent. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C: Update CONFIG_SERIAL_SAMSUNG_UARTS handlingBen Dooks
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places in the kernel where it had been missed. This finishes fixing a long standing issue where S3C2443 and S3C64XX could not use the 4th UART Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] S3C: Update number of serial portsBen Dooks
Update the serial driver to handle the 4 ports of the S3C2443 and S364XX series. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18[ARM] MXC: remove dependency to other include files from irqs.hSascha Hauer
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and switches to more meaningful names for the irq related macros. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mx1-UART-supportPaulius Zaleckas
Adds support for MX1 architecture to UART driver. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-15[ARM] S3C: Update serial driver IRQ handlingBen Dooks
The S3C64XX code changes the order of the serial interrupts, so change the registration process to pickup the extra IRQ resources. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-15[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCsBen Dooks
Add support to the Samsung serial driver for the S3C6400 and S3C6410 serial ports. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24A0: Serial port definitions and driver support.Sandeep Patil
Add serial support for S3C24A0, based on current S3C2410 UART driver. It adds necessary new defines in regs-serial.h for S3C24A0 and the code to support this device in drivers/serial/s3c24a0.c Signed-off-by: Sandeep Patil <sandeep.patil@azingo.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] CPUFREQ: S3C24XX serial CPU frequency scaling support.Ben Dooks
Add support for CPU frequency scalling to the S3C24XX serial driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN: prevent IRQ retargetting in request_irq() [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule [IA64] Clear up section mismatch for ioc4_ide_attach_one. [IA64] Clear up section mismatch with arch_unregister_cpu() [IA64] Clear up section mismatch for sn_check_wars. [IA64] Updated the generic_defconfig to work with the 2.6.28-rc7 kernel. [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE [IA64] eliminate NULL test and memset after alloc_bootmem [IA64] remove BUILD_BUG_ON from paravirt_getreg()
2008-12-10drivers/serial/s3c2440.c: fix typo in MODULE_LICENSEBalaji Rao
Signed-off-by: Balaji Rao <balajirrao@gmail.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-09[IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submoduleTony Luck
s/ioc3uart_submodule/ioc3uart_ops/ makes the section mismatch check happy. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-05Fix incorrect use of loose in tty/serial driversNick Andrew
[Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03Merge branch 'merge'Paul Mackerras
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxa: move UART register definitions into dedicated regs-uart.hEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-30Merge branch 'clks' into develRussell King
2008-11-30[ARM] amba drivers: don't pass a consumer clock name for devices with unique ↵Russell King
clocks Where devices only have one consumer, passing a consumer clock ID has no real benefit, and it only encourages wrong implementations of the clk API. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] lh7a40x: avoid polluting the kernel's namespaceRussell King
Avoid unnecessarily pollution of the kernel's namespace by avoiding mach/hardware.h in mach/io.h. Include this header file where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-24Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into mergePaul Mackerras
2008-11-19Merge branch 'linux-2.6' into nextPaul Mackerras
2008-11-19serial/pmac_zilog: Add console polling supportChris J Arges
This implements poll_get_char and poll_put_char for console polling, which enables kgdb to work on machines that use the pmac_zilog serial driver, for example the Apple PowerMac G5. Signed-off-by: Chris J Arges <arges@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-14powerpc/virtex: fix various format/casting printk mismatchesGrant Likely
Various printk format string in code used by the Xilinx Virtex platform are not 32-bit/64-bit safe. Add correct casting to fix the bugs. Reported-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-11-13serial: sh-sci: Reorder the SCxTDR write after the TDxE clear.Paul Mundt
Under qemu there is a race between the TDxE read-and-clear and the SCxTDR write. While on hardware it can be gauranteed that the read-and-clear will happen prior to the character being written out, no such assumption can be made under emulation. As this path happens with IRQs off and the hardware itself doesn't care about the ordering, move the SCxTDR write until after the read-and-clear. Signed-off-by: Vladimir Prus <vladimir@codesourcery.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-12serial: sh-sci: fix cannot work SH7723 SCIFAYoshihiro Shimoda
SH7723 has SCIFA. This module is similer SCI register map, but it has FIFO. So this patch adds new type(PORT_SCIFA) and change some type checking. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-06atmel_serial: keep clock off when it's not neededDavid Brownell
The atmel_serial driver is mismanaging its clock by leaving it on at all times ... the whole point of clock management is to leave it off unless it's actively needed, which conserves power!! Although the kernel doesn't actually hang without my fix, it does discard quite a lot of early console output. The result still looks correct: usart users= 1 on 35000000 Hz, for atmel_usart.0 usart users= 0 off 35000000 Hz, for atmel_usart.2 when using ttyS0 as serial console. [haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01Merge branch 'cris_move' of git://www.jni.nu/crisLinus Torvalds
* 'cris_move' of git://www.jni.nu/cris: [CRIS] Move header files from include to arch/cris/include. [CRISv32] Remove warning in io.h
2008-10-31Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-10-31sh: Fix up the shared IRQ demuxer's control bit testing logic.Michael Trimarchi
Correct the interrupt handler in sh4 serial device, return the correct value and check for what is anabled in the SCSCR register. The sh7722 is broken just sending a break using minicom. Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31Define SCSPTR1 for SH 7751RMatt Fleming
After the recent commit to kill off SCI/SCIF special casing SH 7751R fails to compile with CONFIG_SH_RTS7751R2D set. This is because SCSPTR1 is undefined. Take the value for SCSPTR1 from the SH7751R Group Hardware Manual. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v0.10.2 at 2024-11-11 14:11:48 (GMT)