summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)Author
2016-01-23Merge tag 'armsoc-tegra' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
2016-01-23Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
2016-01-22soc: qcom/spm: shut up uninitialized variable warningArnd Bergmann
gcc warns about the 'found' variable possibly being used uninitialized: drivers/soc/qcom/spm.c: In function 'spm_dev_probe': drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized] However, the code is correct because we know that there is always at least one online CPU. This initializes the 'found' variable to zero before the loop so the compiler knows it does not have to warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ...
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-21Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-21drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding itStephen Boyd
Now that we have a generic library function for this, replace the open-coded instance. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: <zajec5@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15Merge tag 'powerpc-4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Core: - Ground work for the new Power9 MMU from Aneesh Kumar K.V - Optimise FP/VMX/VSX context switching from Anton Blanchard Misc: - Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan - Allow wrapper to work on non-english system from Laurent Vivier - Add rN aliases to the pt_regs_offset table from Rashmica Gupta - Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt - Include KVM guest test in all interrupt vectors from Paul Mackerras - Fix DSCR inheritance over fork() from Anton Blanchard - Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng - Print MSR TM bits in oops messages from Michael Neuling - Add TM signal return & invalid stack selftests from Michael Neuling - Limit EPOW reset event warnings from Vipin K Parashar - Remove the Cell QPACE code from Rashmica Gupta - Append linux_banner to exception information in xmon from Rashmica Gupta - Add selftest to check if VSRs are corrupted from Rashmica Gupta - Remove broken GregorianDay() from Daniel Axtens - Import Anton's context_switch2 benchmark into selftests from Michael Ellerman - Add selftest script to test HMI functionality from Daniel Axtens - Remove obsolete OPAL v2 support from Stewart Smith - Make enter_rtas() private from Michael Ellerman - PPR exception cleanups from Michael Ellerman - Add page soft dirty tracking from Laurent Dufour - Add support for Nvlink NPUs from Alistair Popple - Add support for kexec on 476fpe from Alistair Popple - Enable kernel CPU dlpar from sysfs from Nathan Fontenot - Copy only required pieces of the mm_context_t to the paca from Michael Neuling - Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey - Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt - Add HWCAP bits for Power9 from Michael Ellerman - Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V - Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins - scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand - Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand cxl: - cxl: Fix possible idr warning when contexts are released from Vaibhav Jain - cxl: use correct operator when writing pcie config space values from Andrew Donnellan - cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain - cxl: fix build for GCC 4.6.x from Brian Norris - cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris - cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan Freescale: - Freescale updates from Scott: Highlights include moving QE code out of arch/powerpc (to be shared with arm), device tree updates, and minor fixes" * tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits) powerpc/module: Handle R_PPC64_ENTRY relocations scripts/recordmcount.pl: support data in text section on powerpc powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff powerpc/mm: Fix _PAGE_PTE breaking swapoff cxl: Enable PCI device ID for future IBM CXL adapter cxl: use -Werror only with CONFIG_PPC_WERROR cxl: fix build for GCC 4.6.x powerpc: Add HWCAP bits for Power9 powerpc/powernv: Reserve PE#0 on NPU powerpc/powernv: Change NPU PE# assignment powerpc/powernv: Fix update of NVLink DMA mask powerpc/powernv: Remove misleading comment in pci.c powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing powerpc: Fix build break due to paca mm_context_t changes cxl: Fix DSI misses when the context owning task exits MAINTAINERS: Update Scott Wood's e-mail address powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery() powerpc: Fix style of self-test config prompts powerpc/powernv: Only delay opal_rtc_read() retry when necessary ...
2016-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2016-01-12Merge tag 'tegra-for-4.5-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into late/tegra ARM: tegra: Core SoC changes for v4.5-rc1 The big thing here is Tegra210 support, which is really only the Kconfig symbol. Other than that there's a few miscellaneous fixes. * tag 'tegra-for-4.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-05Merge branches 'misc' and 'misc-rc6' into for-linusRussell King
2015-12-31ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependencyArnd Bergmann
The firmware driver can be a loadable module, but the power domain can only be built-in, so we get a build error in an allmodconfig kernel: :(.text+0x17e59c): undefined reference to `rpi_firmware_property' :(.text+0x17e51c): undefined reference to `rpi_firmware_get' :(.text+0x17e244): undefined reference to `rpi_firmware_property' This changes the dependency to only allow the power domain code to be enabled when the firmware driver is built-in. Other users of the firmware driver may still be loadable modules and not everyone needs the power domains, so we don't change the firmware code. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-31Merge tag 'bcm2835-drivers-next-2015-12-28' of ↵Arnd Bergmann
http://github.com/anholt/linux into next/drivers Pull "BCM2835 drivers changes for 4.5" from Eric Anholt: This pull request includes the bcm2835 changes for 4.5 targeting the arm-soc next/drivers branch. * tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux: ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware.
2015-12-22QE: Move QE from arch/powerpc to drivers/socZhao Qiang
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-12-22Merge tag 'omap-for-v4.5/wakeup-m3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers TI wakeup M3 IPC device driver for v4.5 merge window. This driver will eventually allow am33xx and am437x to support PM with their Cortex-M3 power management processor. This driver has been waiting to get merged for quite a while but has had dependencies to the remoteproc that are now out of the way. * tag 'omap-for-v4.5/wakeup-m3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: Add wkup_m3_ipc driver Documentation: dt: add bindings for TI Wakeup M3 IPC device Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'v4.4-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/drivers Change the scpsys to builtin_platform_driver_probe. Add regulator support for scpsys driver. * tag 'v4.4-next-soc' of https://github.com/mbgg/linux-mediatek: drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'qcom-soc-for-4.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based SoC Updates for 4.5 * Add WCNSS_CTRL client * Various Kconfig changes to fix build issues * Update SoC Qualcomm MAINTAINERS entry * Add SMP2P, SMSM, and SMEM state machine drivers * Add SMD-RPM support for existing platforms * tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM soc: qcom: Introduce common SMEM state machine code Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hookLorenzo Pieralisi
The suspend() hook in the cpuidle_ops struct is always called on the cpu entering idle, which means that the cpu parameter passed to the suspend hook always corresponds to the local cpu, making it somewhat redundant. This patch removes the logical cpu parameter from the ARM cpuidle_ops.suspend hook and updates all the existing kernel implementations to reflect this change. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lina Iyer <lina.iyer@linaro.org> Tested-by: Lina Iyer <lina.iyer@linaro.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> [psci] Cc: Lina Iyer <lina.iyer@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-22ARM: bcm2835: add rpi power domain driverAlexander Aring
This patch adds support for several power domains on Raspberry Pi, including USB (so it can be enabled even if the bootloader didn't do it), and graphics. This patch is the combined work of Eric Anholt (who wrote USB support inside of the Raspberry Pi firmware driver, and wrote the non-USB domain support) and Alexander Aring (who separated the original USB work out from the firmware driver). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org>
2015-12-18drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/soc/mediatek/Kconfig:config MTK_SCPSYS drivers/soc/mediatek/Kconfig: bool "MediaTek SCPSYS Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-18soc: mediatek: SCPSYS: Add regulator supportSascha Hauer
The power domains are supplied by regulators. Add support for them so that the regulators are properly turned on before a domain is powered up and turned off when a domain is powered down. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-15Merge tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/multiplatform Merge "mvebu soc for 4.5 (part 1)" from Gregory CLEMENT: - orion5x/mv78xx0 multiplatform conversion - legacy dove PMU support conversion * tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu: ARM: dove: convert legacy dove to PMU support soc: dove: add legacy support to PMU driver ARM: orion5x: multiplatform support ARM: orion5x: clean up mach/*.h headers ARM: mv78xx0: multiplatform support ARM: mv78xx0: clean up mach/*.h headers ARM: orion: use SPARSE_IRQ everywhere ARM: orion: always use MULTI_IRQ_HANDLER ARM: orion: move watchdog setup to mach-orion5x Conflicts: arch/arm/Kconfig arch/arm/mach-dove/include/mach/entry-macro.S arch/arm/mach-orion5x/include/mach/entry-macro.S
2015-12-15Merge tag 'realview-base-armsoc-1-tag' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform Merge "Realview multiplatform support" from Linus Walleij: The board and infrastructure changes for RealView multiplatform and extended DT support. * tag 'realview-base-armsoc-1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: add an DT SMP boot method ARM: realview: select SP810 and ICST for the DT variant soc: versatile: add support for the PB11MPCore clk: versatile-icst: add device tree support clk: versatile-icst: refactor to allocate regmap separately clk: versatile-icst: convert to use regmap ARM: realview: remove private barrier implementation ARM: no longer force unbuffered DMA for realview clk/realview: stop using machine headers ARM: realview: don't map undefined PCI registers ARM: realview: remove sparsemem hack Conflicts: drivers/clk/versatile/Kconfig
2015-12-15soc: versatile: add support for the PB11MPCoreLinus Walleij
The SoC driver needs a minor update to display the correct sysfs information for the PB11MPCore. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15soc: qcom: smd-rpm: Add existing platform supportAndy Gross
This patch adds support for all current Qualcomm platforms which utilize RPM over SMD. This includes both MSM8916 and APQ8084. Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: Introduce WCNSS_CTRL SMD clientBjorn Andersson
The WCNSS_CTRL SMD client is used for among other things upload nv firmware to a newly booted WCNSS chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08ARM: qcom: select ARM_CPU_SUSPEND for power managementArnd Bergmann
The qcom spm driver uses cpu_resume_arm(), which is not included in the kernel in all configurations: drivers/built-in.o: In function `qcom_cpu_spc': :(.text+0xbc022): undefined reference to `cpu_suspend' drivers/built-in.o: In function `qcom_cpuidle_init': :(.init.text+0x610c): undefined reference to `cpu_resume_arm' This adds a 'select' Kconfig statement to ensure it's always enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: enable smsm/smp2p modular buildArnd Bergmann
The newly added smp2p and smsm drivers cannot be loadable modules but depend on smem, which can be, and that causes a link error: drivers/built-in.o: In function `qcom_smp2p_intr': :(.text+0xa6e68): undefined reference to `qcom_smem_get' drivers/built-in.o: In function `qcom_smp2p_probe': :(.text+0xa7320): undefined reference to `qcom_smem_alloc' :(.text+0xa736c): undefined reference to `qcom_smem_get' drivers/built-in.o: In function `qcom_smsm_probe': :(.text+0xa7b34): undefined reference to `qcom_smem_get' This marks all the drivers as 'tristate' to make the Kconfig dependency resolution work properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: dbb04bd7122f ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Fixes: d7387fc6add4 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: smp2p: Qualcomm Shared Memory Point to PointBjorn Andersson
Introduce the Qualcomm Shard Memory Point to Point driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: smsm: Add driver for Qualcomm SMSMBjorn Andersson
This driver exposed the Qualcomm Shared Memory State Machine bits. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: Introduce common SMEM state machine codeBjorn Andersson
This implements a common API for handling and exposing SMP2P and SMSM state information. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08treewide: Fix typos in printkMasanari Iida
This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-08soc: dove: add legacy support to PMU driverRussell King
Add support for legacy non-DT Dove to the PMU driver, so that we can transition the legacy support over. [gregory.clement@free-electrons.com: removed pm_genpd_poweroff_unused] Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-03soc: ti: Add wkup_m3_ipc driverDave Gerlach
Introduce a wkup_m3_ipc driver to handle communication between the MPU and Cortex M3 wkup_m3 present on am335x. This driver is responsible for actually booting the wkup_m3_rproc and also handling all IPC which is done using the IPC registers in the control module, a mailbox, and a separate interrupt back from the wkup_m3. A small API is exposed for executing specific power commands, which include configuring for low power mode, request a transition to a low power mode, and status info on a previous transition. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-25Merge tag 'keystone-fixes-for-4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Merge "Few Keystone fixes for 4.4-rcx" from Santosh Shilimkar: - Fix the optional PDSP firmware loading - Fix linking RAM setup for QMs - Fix crash with clk_ignore_unused * tag 'keystone-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers soc: ti: use request_firmware_direct() as acc firmware is optional
2015-11-24soc: Mediatek: Enable SCPSYS power domain driver by defaultEddie Huang
If enable Mediatek 8173 SoC, it should also enable power domain driver. Otherwise access clk subsystem register will fail. Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-11-24ARM: tegra: select USB_ULPI from EHCI rather than platformArnd Bergmann
For historic reasons, the tegra platform selects USB_ULPI from architecture code, but that hasn't really made sense for a long time, as the only user of that code is the Tegra EHCI driver that has its own Kconfig symbol. This removes the 'select' statements from mach-tegra and drivers/soc/tegra and adds them with the device driver that actually needs them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-24soc/tegra: Add Tegra210 supportThierry Reding
Also known as Tegra X1, the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53 cores in a switched configuration. It features a GPU using the Maxwell architecture with support for DX11, SM4, OpenGL 4.5, OpenGL ES 3.1 and providing 256 CUDA cores. It supports hardware accelerated en- and decoding of various video standards including H.265, H.264 and VP8 at 4K resolutions and up to 60 fps. Besides the multimedia features it also comes with a variety of I/O controllers such as GPIO, I2C, SPI, SDHCI, PCIe, SATA and XHCI, to name only a few. Add a Kconfig option for Tegra210 to allow SoC-specific support to be enabled for this new generation. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-24soc/tegra: Provide per-SoC Kconfig symbolsThierry Reding
Move per-SoC generation Kconfig symbols to drivers/soc/tegra/Kconfig to gather them all in a single place. This directory is a natural location for these options since it already contains the drivers that are shared across 32-bit and 64-bit ARM architectures. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-23soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managersMichal Morawiec
Configure linking RAM for both queue managers also in case when only linking RAM 0 is specified in device tree. Currently hwqueue driver configures linking RAM(s) to be used cooperatively by the QMs (shared mode). Therefore if both queue managers are used then both must be configured with exactly the same linking RAM info (base address and size) independent of the number of linking RAM(s) specified in the device tree. For proper operation only one linking RAM is required and in most cases this can be internal one as long as it is able to handle the number of descriptors used in the system. Current driver code however skips configuration of second queue manager if second linking RAM is not specified. If the configuration for the QM2 is missing there will be a crash when it tries to push/pop descriptors from its queues. Signed-off-by: Michal Morawiec <michal.1.morawiec.ext@nokia.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-11-23soc: ti: use request_firmware_direct() as acc firmware is optionalMurali Karicheri
When firmware image for PDSP firmware is absent in the file system the kernel boot with ramfs/nfs is stuck for 60 seconds being the the default timeout. request_firmware_direct() is to take care of such optional firmware loading and hence replace the call in the driver with this API. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-11-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
2015-11-10Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...
2015-11-10Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Olof Johansson: "A handful of fixes that came in and didn't seem warranted to go in through the 4.3-rc cycle. - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx - A couple of non-critical Davinci bugfixes - A fix to reset irq affinity for TI platforms (silences a warning at reboot)" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: update lpc18xx entry with more drivers soc: ti: reset irq affinity before freeing irq ARM: cns3xxx: pci: avoid potential stack overflow ARM: davinci: clock: Correct return values for API functions ARM: davinci: re-use %*ph specifier MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs
2015-10-31soc: qcom: smd-rpm: Correct size of outgoing messageBjorn Andersson
With the removal of VLAIS the size was incorrectly changed to only cover the headers of the packet, resulting in "empty" requests being sent to the RPM. Correct this so the entire message is transfered. Fixes: 50e1b29b4438 ("soc: qcom: smd: Remove use of VLAIS") Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/soc Do the initial setting of the pmic wrap interrupt before requesting the interrupt. This fixes the corner-case where the pmic is initialized by the bootloader, but not the pmic watchdog. Add support for active wakeup to the scpsys. This allows to keep the power of a scpsys domain during suspend state. With version v4.3 new subsystem clocks are added to the clock dirver. In late init the kernel turns off all unused clocks. This can provoke a hang if the kernel tries to access the venc and venc_lt power domain registers. Add the necessary parent clocks for this power domains to the scpsys so that no random hang happens. The bootloader of mt6589, mt8135 and mt1827 does not turn on the arm-arch-timer. As there is no opensource bootloader in the near future for this architectures we enable the arch timer at kernel boot. We need the arch timer for SMP boot. Add support for SMP on mt6589, mt8127 and mt8135. * tag 'v4.3-next-soc' of https://github.com/mbgg/linux-mediatek: ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: mediatek: add scpsys support active_wakeup soc: mediatek: Move the initial setting of pmic wrap interrupt before requesting irq. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23Merge tag 'v4.4-rockchip-drivers2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Some fixes for the new power-domain driver, including restricting Rockchip Kconfig options, fixing a possible null-pointer and a typo in the dt-bindings. * tag 'v4.4-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: rockchip: Restrict to ARCH_ROCKCHIP Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-16soc: rockchip: power-domain: don't try to print the clock name in error caseHeiko Stuebner
When we never got the the clock-reference, i.e. when IS_ERR(clk) is true, don't try to print the clock name via %pC as this of course produces a null-pointer-dereference in __clk_get_name(). Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Caesar Wang <wxt@rock-chips.com>
2015-10-15soc: qcom/smem: add HWSPINLOCK dependencyArnd Bergmann
This fixes a build error when smem is enabled without hwspinlock: drivers/built-in.o: In function `qcom_smem_alloc': rockchip-efuse.c:(.text+0x7a3e4): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7a568): undefined reference to `__hwspin_unlock' drivers/built-in.o: In function `qcom_smem_remove': rockchip-efuse.c:(.text+0x7a5cc): undefined reference to `hwspin_lock_free' drivers/built-in.o: In function `qcom_smem_probe': rockchip-efuse.c:(.text+0x7a960): undefined reference to `hwspin_lock_request_specific' rockchip-efuse.c:(.text+0x7a988): undefined reference to `of_hwspin_lock_get_id' drivers/built-in.o: In function `qcom_smem_get': rockchip-efuse.c:(.text+0x7aa24): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7aafc): undefined reference to `__hwspin_unlock' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-15Merge tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm ↵Arnd Bergmann
into next/drivers Pull "Qualcomm ARM Based SoC Updates for 4.4" from Andy Gross: * Implement id_table driver matching in SMD * Avoid NULL pointer exception on remove of SMEM * Reorder SMEM/SMD configs * Make qcom_smem_get() return a pointer * Handle big endian CPUs correctly in SMEM * Represent SMD channel layout in structures * Use __iowrite32_copy() in SMD * Remove use of VLAIs in SMD * Handle big endian CPUs correctly in SMD/RPM * Handle big endian CPUs corretly in SMD * Reject sending SMD packets that are too large * Fix endianness issue in SCM __qcom_scm_is_call_available * Add missing prototype for qcom_scm_is_available() * Correct SMEM items for upper channels * Use architecture level to build SCM correctly * Delete unneeded of_node_put in SMD * Correct active/slep state flagging in SMD/RPM * Move RPM message ram out of SMEM DT node * tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm: soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs soc: qcom: smd_rpm: Handle big endian CPUs soc: qcom: smd: Remove use of VLAIS soc: qcom: smd: Use __iowrite32_copy() instead of open-coding it soc: qcom: smd: Represent channel layout in structures soc: qcom: smem: Handle big endian CPUs soc: qcom: Make qcom_smem_get() return a pointer soc: qcom: Reorder SMEM/SMD configs soc: qcom: smem: Avoid NULL pointer exception on remove soc: qcom: smd: Implement id_table driver matching