summaryrefslogtreecommitdiff
path: root/drivers/spi/Makefile
AgeCommit message (Collapse)Author
2016-09-30Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', ↵Mark Brown
'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next
2016-09-30Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', ↵Mark Brown
'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next
2016-09-24spi: iproc-qspi: Add Broadcom iProc SoCs supportKamal Dasu
This spi driver uses the common spi-bcm-qspi driver and implements iProc SoCs specific interrupt controller. The common driver now calls the SoC handlers when present. Adding support for both muxed l1 and unmuxed interrupt sources. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: brcmstb-qspi: Broadcom settop platform driverKamal Dasu
Adding the settop SoC platfrom driver, this driver is compatible with the settop MSPI+BSPI and MSPI only blocks implemented on the SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: bcm-qspi: Add Broadcom MSPI driverKamal Dasu
Master SPI driver for Broadcom settop, iProc SoCs. The driver is used for devices that use SPI protocol on BRCMSTB, NSP, NS2 SoCs. SoC platform driver call exported porbe(), remove() and suspend/resume pm_ops implemented in this common driver. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-19spi: octeon: Add ThunderX driverJan Glauber
Add ThunderX SPI driver using the shared part from the Octeon driver. The main difference of the ThunderX driver is that it is a PCI device so probing is different. The system clock settings can be specified in device tree. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08spi: add driver for J-Core SPI controllerRich Felker
The J-Core "spi2" device is a PIO-based SPI master controller. It differs from "bitbang" devices in that that it's clocked in hardware rather than via soft clock modulation over gpio, and performs byte-at-a-time transfers between the cpu and SPI controller. This driver will be extended to support future versions of the J-Core SPI controller with DMA transfers when they become available. Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24spi: octeon: Split driver into Octeon specific and common partsJan Glauber
Separate driver probing from SPI transfer functions. Signed-off-by: Jan Glauber <jglauber@cavium.com> Tested-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18spi: pic32-sqi: add SPI driver for PIC32 SQI controller.Purna Chandra Mandal
This driver implements SPI master interface for Quad SPI controller, specifically for accessing quad SPI flash. It uses descriptor-based DMA transfer mode and supports half-duplex communication for single, dual and quad SPI transactions. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-04spi: spi-pic32: Add PIC32 SPI master driverPurna Chandra Mandal
The PIC32 SPI driver is capable of performing SPI transfers using PIO or external DMA engine. GPIO controlled /CS support is made default in the driver for correct operation of the controller. This can be enabled by adding "cs-gpios" property of the SPI node in board dts file. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-11Merge remote-tracking branches 'spi/topic/lp8841', 'spi/topic/msg', ↵Mark Brown
'spi/topic/pl022' and 'spi/topic/pxa2xx' into spi-next
2016-02-24spi: master driver to enable RTC on ICPDAS LP-8841Sergei Ianovich
ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI master which makes the RTC usable. The driver is not supposed to work with anything else. The driver uses the standard MicroWire half-duplex transfer timing. Master output is set on low clock and sensed by the RTC on the rising edge. Master input is set by the RTC on the trailing edge and is sensed by the master on low clock. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09Merge branch 'topic/acpi' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-pxa2xx
2016-02-05spi: Add Analog Devices AXI SPI Engine controller supportLars-Peter Clausen
This patch adds support for the AXI SPI Engine controller which is a FPGA soft-peripheral which is used in some of Analog Devices' reference designs. The AXI SPI Engine controller is part of the SPI Engine framework[1] and allows memory mapped access to the SPI Engine control bus. This allows it to be used as a general purpose software driven SPI controller. The SPI Engine in addition offers some optional advanced acceleration and offloading capabilities, which are not part of this patch though and will be introduced separately. At the core of the SPI Engine framework is a small sort of co-processor that accepts a command stream and turns the commands into low-level SPI transactions. Communication is done through three memory mapped FIFOs in the register map of the AXI SPI Engine peripheral. One FIFO for the command stream and one each for transmit and receive data. The driver translates a spi_message in a command stream and writes it to the peripheral which executes it asynchronously. This allows it to perform very precise timings which are required for some SPI slave devices to achieve maximum performance (e.g. analog-to-digital and digital-to-analog converters). The execution flow is synchronized to the host system by a special synchronize instruction which generates a interrupt. [1] https://wiki.analog.com/resources/fpga/peripherals/spi_engine Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-15spi: pxa2xx: Remove CONFIG_SPI_PXA2XX_DMAJarkko Nikula
After removal of legacy PXA DMA code by the commit 6356437e65c2 ("spi: spi-pxa2xx: remove legacy PXA DMA bits") the CONFIG_SPI_PXA2XX_DMA follows the CONFIG_SPI_PXA2XX and cannot be disabled alone. Therefore remove this config symbol and dead definitions from the spi-pxa2xx.h. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-12spi: add spi-loopback-test to build frameworkMartin Sperl
adding the spi-loopback-test module to Kconfig and Makefile Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-07spi: bcm2835aux: add bcm2835 auxiliary spi device driverMartin Sperl
The bcm2835 has 2 auxiliary spi bus masters spi1 and spi2. This implements the driver to enable these devices. The driver does not implement native chip-selects but uses the aribtrary GPIO-chip-selects provided by the spi-chipselect. Note that this driver relies on the fact that the clock is implemented by the clk-bcm2835-aux driver, which enables/disables the HW block when requesting/releasing the clock. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-31Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/xcomm' and ↵Mark Brown
'spi/topic/xlp' into spi-next
2015-08-28spi/xlp: SPI controller driver for Netlogic XLP SoCsKamlakant Patel
Add SPI Master controller driver for the SPI interface on XLP8XX, XLP3XX, XLP2XX, XLP9XX and XLP5XX family of Netlogic XLP MIPS64 processors. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-07spi: mediatek: Add spi bus for Mediatek MT8173Leilk Liu
This patch adds basic spi bus for MT8173. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-17Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev' and ↵Mark Brown
'spi/topic/zynq' into spi-next
2015-06-17Merge remote-tracking branches 'spi/topic/pxa', 'spi/topic/rb4xx', ↵Mark Brown
'spi/topic/rspi', 'spi/topic/s3c64xx' and 'spi/topic/sh-msiof' into spi-next
2015-06-12spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controllerRanjit Waghmode
This patch adds support for GQSPI controller driver used by Zynq Ultrascale+ MPSoC Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09spi: spi-pxa2xx: remove legacy PXA DMA bitsDaniel Mack
Generic DMA support was already implemented by commit cd7bed003404 ("spi/pxa2xx: break out the private DMA API usage into a separate file") which moved all the legacy PXA DMA implementation code into its own file. With generic DMA available for PXA, we can now just trash this file. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> [respin after pxa dmaengine support upstream] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-18spi: Add SPI driver for Mikrotik RB4xx series boardsBert Vermeulen
This driver mediates access between the connected CPLD and other devices on the bus. The m25p80-compatible boot flash and (some models) MMC use regular SPI, bitbanged as required by the SoC. However the SPI-connected CPLD has a two-wire mode, in which two bits are transferred per SPI clock cycle. The second bit is transmitted with the SoC's CS2 pin. Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-08Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev', ↵Mark Brown
'spi/topic/st-ssc' and 'spi/topic/ti-qspi' into spi-next
2014-12-22spi: add support for DLN-2 USB-SPI adapterLaurentiu Palcu
This adds support for Diolan DLN2 USB-SPI adapter. Information about the USB protocol interface can be found in the Programmer's Reference Manual [1], see section 5.4.6 for the SPI master module commands and responses. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Add new driver for STMicroelectronics' SPI ControllerLee Jones
This patch adds support for the SPI portion of ST's SSC device. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-08Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/fsl-espi', ↵Mark Brown
'spi/topic/gpio', 'spi/topic/img-spfi' and 'spi/topic/meson' into spi-next
2014-11-24spi: meson: Add support for Amlogic Meson SPIFCBeniamino Galvani
This is a driver for the Amlogic Meson SPIFC (SPI flash controller), which is one of the two SPI controllers available on the SoC. It doesn't support DMA and has a 64-byte unified transmit/receive buffer. The device is optimized for interfacing with SPI NOR memories and allows the execution of standard operations such as read, page program, sector erase, etc. in a simplified way, toggling a bit in a dedicated register. The driver doesn't use those predefined commands and relies only on custom transfers. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17spi: Add driver for IMG SPFI controllerAndrew Bresticker
Add support for the Synchronous Peripheral Flash Interface (SPFI) master controller found on IMG SoCs. The SPFI controller supports 5 chip-select lines and single/dual/quad mode SPI transfers. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-19spi: bcm53xx: driver for SPI controller on Broadcom bcma SoCRafał Miłecki
Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA devices). If board has a serial flash, it's connected over SPI and the bcma bus includes a SPI controller. Example log from such a board: bus0: Found chip with id 53010, rev 0x00 and package 0x02 (...) bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) This patch adds a bcma driver for SPI core, it registers SPI master controller and "bcm53xxspiflash" SPI device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-04spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPIaddy ke
In order to facilitate understanding, rockchip SPI controller IP design looks similar in its registers to designware. But IC implementation is different from designware, So we need a dedicated driver for Rockchip RK3XXX SoCs integrated SPI. The main differences: - dma request line: rockchip SPI controller have two DMA request line for tx and rx. - Register offset: RK3288 dw SPI_CTRLR0 0x0000 0x0000 SPI_CTRLR1 0x0004 0x0004 SPI_SSIENR 0x0008 0x0008 SPI_MWCR NONE 0x000c SPI_SER 0x000c 0x0010 SPI_BAUDR 0x0010 0x0014 SPI_TXFTLR 0x0014 0x0018 SPI_RXFTLR 0x0018 0x001c SPI_TXFLR 0x001c 0x0020 SPI_RXFLR 0x0020 0x0024 SPI_SR 0x0024 0x0028 SPI_IPR 0x0028 NONE SPI_IMR 0x002c 0x002c SPI_ISR 0x0030 0x0030 SPI_RISR 0x0034 0x0034 SPI_TXOICR NONE 0x0038 SPI_RXOICR NONE 0x003c SPI_RXUICR NONE 0x0040 SPI_MSTICR NONE 0x0044 SPI_ICR 0x0038 0x0048 SPI_DMACR 0x003c 0x004c SPI_DMATDLR 0x0040 0x0050 SPI_DMARDLR 0x0044 0x0054 SPI_TXDR 0x0400 NONE SPI_RXDR 0x0800 NONE SPI_IDR NONE 0x0058 SPI_VERSION NONE 0x005c SPI_DR NONE 0x0060 - register configuration: such as SPI_CTRLRO in rockchip SPI controller: cr0 = (CR0_BHT_8BIT << CR0_BHT_OFFSET) | (CR0_SSD_ONE << CR0_SSD_OFFSET); cr0 |= (rs->n_bytes << CR0_DFS_OFFSET); cr0 |= ((rs->mode & 0x3) << CR0_SCPH_OFFSET); cr0 |= (rs->tmode << CR0_XFM_OFFSET); cr0 |= (rs->type << CR0_FRF_OFFSET); For more information, see RK3288 chip manual. - Wait for idle: Must ensure that the FIFO data has been sent out before the next transfer. Signed-off-by: addy ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-02Merge remote-tracking branches 'spi/topic/adi', 'spi/topic/atmel' and ↵Mark Brown
'spi/topic/cadence' into spi-next
2014-04-14spi: Add driver for Cadence SPI controllerHarini Katakam
Add driver for Cadence SPI controller. This is used in Xilinx Zynq. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: convert spi-bfin-v3.c to a multiplatform driverScott Jiang
Spi v3 controller is not only used on Blackfin. So rename it and use ioread/iowrite api to make it work on other platform. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-30Merge remote-tracking branches 'spi/topic/xilinx' and 'spi/topic/xtfpga' ↵Mark Brown
into spi-next
2014-03-30Merge remote-tracking branches 'spi/topic/sunxi', 'spi/topic/tegra114', ↵Mark Brown
'spi/topic/ti-qspi', 'spi/topic/ti-ssp', 'spi/topic/topcliff-pch', 'spi/topic/txx9', 'spi/topic/xcomm' and 'spi/topic/xfer' into spi-next
2014-03-18spi: remove obsolete spi-ti-ssp driverArnd Bergmann
The tnetv107x platform is getting removed, so this driver will not be needed any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-13spi: add xtfpga SPI controller driverMax Filippov
This simple SPI master controller is built into xtfpga bitstreams. It always transfers 16 bit words in SPI mode 0, automatically asserting CS on transfer start and deasserting on end. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: sunxi: Add Allwinner A10 SPI controller driverMaxime Ripard
The older Allwinner SoCs (A10, A13, A10s and A20) all have the same SPI controller. Unfortunately, this SPI controller, even though quite similar, is significantly different from the recently supported A31 SPI controller (different registers offset, split/merged registers, etc.). Supporting both controllers in a single driver would be unreasonable, hence the addition of a new driver. Like its more recent counterpart, it supports DMA, but the driver only does PIO until we have a dmaengine driver for this platform. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-19spi: Add Qualcomm QUP SPI controller supportIvan T. Ivanov
Qualcomm Universal Peripheral (QUP) core is an AHB slave that provides a common data path (an output FIFO and an input FIFO) for serial peripheral interface (SPI) mini-core. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. Cc: Alok Chauhan <alokc@codeaurora.org> Cc: Gilad Avidov <gavidov@codeaurora.org> Cc: Kiran Gunda <kgunda@codeaurora.org> Cc: Sagar Dharia <sdharia@codeaurora.org> Cc: dsneddon@codeaurora.org Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-05spi: sunxi: Add Allwinner A31 SPI controller driverMaxime Ripard
The Allwinner A31 has a new SPI controller IP compared to the older Allwinner SoCs. It supports DMA, but the driver only does PIO for now, and DMA will be supported eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04spi: bcm63xx-hsspi: add bcm63xx HSSPI driverJonas Gorski
Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs. It does feature some new modes like 3-wire or dual spi, but neither of it is currently implemented. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'spi/topic/qspi' into spi-nextMark Brown
2013-09-01Merge remote-tracking branch 'spi/topic/efm32' into spi-nextMark Brown
2013-09-01Merge remote-tracking branch 'spi/topic/dspi' into spi-nextMark Brown
2013-08-22spi/qspi: Add qspi flash controllerSourav Poddar
The patch add basic support for the quad spi controller. QSPI is a kind of spi module that allows single, dual and quad read access to external spi devices. The module has a memory mapped interface which provide direct interface for accessing data form external spi devices. The patch will configure controller clocks, device control register and for defining low level transfer apis which will be used by the spi framework to transfer data to the slave spi device(flash in this case). Test details: ------------- Tested this on dra7 board. Test1: Ran mtd_stesstest for 40000 iterations. - All iterations went through without failure. Test2: Use mtd utilities: - flash_erase to erase the flash device - mtd_debug read to read data back. - mtd_debug write to write to the data flash. diff between the write and read data shows zero. Acked-by: Felipe Balbi<balbi@ti.com> Reviewed-by: Felipe Balbi<balbi@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22spi:Add Freescale DSPI driver for Vybrid VF610 platformChao Fu
The serial peripheral interface (SPI) module implemented on Freescale Vybrid platform provides a synchronous serial bus for communication between Vybrid and the external peripheral device. The SPI supports full-duplex, three-wire synchronous transfer, has TX/RX FIFO with depth of four entries. This driver is the SPI master mode driver and has been tested on Vybrid VF610TWR board. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Chao Fu <b44548@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-09spi: new controller driver for efm32 SoCsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>