summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-coldfire-qspi.c
AgeCommit message (Collapse)Author
2015-10-12spi: spi-coldfire-qspi: enable RuntimePM before registering to the coreWolfram Sang
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22spi: Remove FSF mailing addressesJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-12spi: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org>
2014-03-30Merge remote-tracking branches 'spi/topic/bus-num', 'spi/topic/cleanup', ↵Mark Brown
'spi/topic/clps711x', 'spi/topic/coldfire', 'spi/topic/completion' and 'spi/topic/davinci' into spi-next
2014-03-25spi: coldfire-qspi: Simplify the code to set register bits for transfer speedAxel Lin
spi core will use spi->max_speed_hz as transfer speed if the transfer speed was not set. So we don't need to test t->speed_hz in mcfqspi_transfer_one(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10spi: coldfire-qspi: Prevent NULL pointer dereferenceAxel Lin
If pdata->cs_control is NULL, we will hit NULL pointer dereference in mcfqspi_cs_select() and mcfqspi_cs_deselect(). Thus add NULL test for pdata->cs_control in probe(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-10spi: coldfire-qspi: Enable clock before calling spi_master_resumeAxel Lin
This ensures clock has been enabled before calling spi_master_resume(). while at it, also add checking return value of spi_master_suspend and spi_master_resume because they may fail. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: coldfire-qspi: Use core message handlingAxel Lin
Convert to use default implementation of transfer_one_message(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: coldfire-qspi: Remove unused dev field from struct mcfqspiAxel Lin
Also remove unused *res variable in mcfqspi_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05spi: coldfire-qspi: Fix getting correct address for *mcfqspiAxel Lin
dev_get_drvdata() returns the address of master rather than mcfqspi. Fixes: af361079 (spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume functions) Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-02-12spi: Remove duplicate code to check chip_selectAxel Lin
In spi_add_device(), we have the code to validate spi->chip_select. So remove the duplicate code in various drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-09spi: coldfire-qspi: remove redundant return value check of ↵Wei Yongjun
platform_get_resource() Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04spi: coldfire-qspi: Use devm_*() functionsJingoo Han
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-01Merge remote-tracking branch 'spi/topic/qspi' into spi-nextMark Brown
2013-08-29spi: Use dev_get_drvdata at appropriate placesAxel Lin
Use dev_get_drvdata() instead of platform_get_drvdata(to_platform_device(dev)). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29spi: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29spi/coldfire-qspi: Convert to core runtime PMMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-26Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/coldfire-qspi' into spi-nextMark Brown
2013-05-29spi: convert drivers to use bits_per_word_maskStephen Warren
Fill in the recently added spi_master.bits_per_word_mask field in as many drivers as possible. Make related cleanups, such as removing any redundant error-checking, or empty setup callbacks. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-16spi: coldfire-qspi: fix error return code in mcfqspi_probe()Wei Yongjun
If pdev->dev.platform_data is not set, mcfqspi_probe() will return 0 and release all the resources, in this case, we should return a error code instead of 0. This patch fix to return -ENOENT in this case and move the check for pdev->dev.platform_data to the begin of this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13spi: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi: remove check for bits_per_word on transfer from low level driverLaxman Dewangan
The spi core make sure that each transfer structure have the proper setting for bits_per_word before calling low level transfer APIs. Hence it is no more require to check again in low level driver for this field whether this is set correct or not. Removing such code from low level driver. The txx9 change also removes a test for bits_per_word set to 0, and forcing it to 8 in that case. This can also be removed now since spi_setup() ensures spi->bits_per_word is not zero. if (!spi->bits_per_word) spi->bits_per_word = 8; Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-08-17spi/coldfire-qspi: Drop extra calls to spi_master_get in suspend/resume ↵Guenter Roeck
functions Suspend and resume functions call spi_master_get() without matching spi_master_put(). The extra references are unnecessary and cause subsequent module unload attempts to fail, so drop the calls. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17spi: spi-coldfire-qspi: Drop extra spi_master_put in device remove functionGuenter Roeck
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which and results in device memory being freed. The subsequent call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20spi: refactor spi-coldfire-qspi to use SPI queue framework.Steven King
Use the new SPI queue framework; remove use of workqueue, replace mcfqspi_transfer with mcfqspi_transfer_one_message, add mcfqspi_prepare_transfer_hw and mcfqspi_unprepare_transfer_hw, update power management routines. Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-24drivercore: Add helper macro for platform_driver boilerplateGrant Likely
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-24spi: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06spi: reorganize driversGrant Likely
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>