summaryrefslogtreecommitdiff
path: root/drivers/ssb
AgeCommit message (Collapse)Author
2015-02-11treewide: Remove unnecessary SSB_DEVTABLE_END macroJoe Perches
Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29ssb: Fix Sparse error in mainPramod Gurav
This change fixes below sparse error: drivers/ssb/main.c:94:16: warning: symbol 'ssb_sdio_func_to_bus' was not declared. Should it be static? Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-12-04SSB / B44: fix WOL for BCM4401Andrey Skvortsov
Wake On Lan was not working on laptop DELL Vostro 1500. If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked. But the laptop could not be woken up with the Magic Packet. The reason for that was that PCIE was not enabled as a system wakeup source and therefore the host PCI bridge was not powered up in suspend mode. PCIE was not enabled in suspend by PM because no child devices were registered as wakeup source during suspend process. On laptop BCM4401 is connected through the SSB bus, that is connected to the PCI-Express bus. SSB and B44 did not use standard PM wakeup functions and did not forward wakeup settings to their parents. To fix that B44 driver enables PM wakeup and registers new wakeup source using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any child devices with enabled wakeup functionality. All other steps are done by PM core code. Signed-off-by: Andrey Skvortsov <Andrej.Skvortzov@gmail.com> Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-24MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling itRafał Miłecki
This makes NVRAM code less bcm47xx/ssb specific allowing it to become a standalone driver in the future. A similar patch for bcma will follow when it's ready. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7612/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-25ssb: add PCI ID 0x4351Álvaro Fernández Rojas
14e4:4351 is found on a Broadcom BCM43222. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ssb: extract power info from SPROM revs 4 and 5Rafał Miłecki
This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15ssb: extract antenna gains from SPROMs revs 4+ properlyRafał Miłecki
They are encoded the same way as in older SPROMs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15ssb: make code for antenna gain extraction more genericRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-24ssb: gpio: add own IRQ domainRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6342/
2014-01-03ssb: fix sparse warnings in driver_chipcommon_sflash.cHauke Mehrtens
CHECK drivers/ssb/driver_chipcommon_sflash.c drivers/ssb/driver_chipcommon_sflash.c:40:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:58:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:69:11: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-17ssb: convert bus code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the ssb bus code to use the correct field. Cc: Michael Buesch <m@bues.ch> Cc: <netdev@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-01ssb: drop BROKEN from SSB_SFLASHRafał Miłecki
With recent patches ssb can fetch info about serial flash and register it as a platform device. No more reasons to mark it BROKEN. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-07-01SSB: Kconfig: Amend SSB_EMBEDDED dependenciesMarkos Chandras
SSB_EMBEDDED needs functions from driver_pcicore which are only available if SSD_DRIVER_HOSTMODE is selected so make it depend on that symbol. Fixes the following linking problem: drivers/ssb/embedded.c:202: undefined reference to `ssb_pcicore_plat_dev_init' drivers/built-in.o: In function `ssb_pcibios_map_irq': drivers/ssb/embedded.c:247: undefined reference to `ssb_pcicore_pcibios_map_irq' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: netdev@vger.kernel.org Cc: Michael Buesch <m@bues.ch> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5484/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-29ssb/trivial: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
2013-06-18ssb: register serial flash as platform deviceRafał Miłecki
This allows writing MTD driver working as a platform driver. In platform_data it will receive struct ssb_sflash, which contains all important data about flash (window, size). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17ssb: add struct for serial flashRafał Miłecki
This data allow writing for example MTD driver. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17ssb: use const for serial flash hardware tableRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-03ssb: sprom: replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-09Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
2013-04-26ssb: implement ssb spuravoid for chipid BCM43222Hauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
2013-04-10ssb: implement spurious tone avoidanceRafał Miłecki
And make use of it in b43. This fixes a regression introduced with 49d55cef5b1925a5c1efb6aaddaa40fc7c693335 b43: N-PHY: implement spurious tone avoidance This commit made BCM4322 use only MCS 0 on channel 13, which of course resulted in performance drop (down to 0.7Mb/s). Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-05ssb: driver_mipscore: add a const qualifierArtem Bityutskiy
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Michael Buesch <m@bues.ch> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-25ssb: read additional sprom v2 and v3 attributes.Hauke Mehrtens
These attributes should be in the sprom for rev 2 and 3, but they were not read out. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: extract board_type from SPROMRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13ssb: pci: Fix flipping of MAC addressLarry Finger
Since commit e565275 entitled "ssb: pci: Standardize a function to get mac address", the SPROM readout of the MAC has had the values flipped so that 00:11:22:33:44:55 became 11:00:33:22:55:44. The fix has been tested on both little- and big-endian architectures. Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ssb: Convert ssb_printk to ssb_<level>Joe Perches
Use a more current logging style. Convert ssb_dbprint to ssb_dbg too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06ssb: pci: Standardize a function to get mac addressJoe Perches
Don't require alignment of mac addresses to u16. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-22Merge branch 'master' of ↵Ralf Baechle
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mips-for-linux-next Conflicts: include/linux/ssb/ssb_driver_gige.h Also resolves a logical merge conflict in drivers/net/ethernet/broadcom/- bgmac.c due to change of an API.
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Synchronize with 'net' in order to sort out some l2tp, wireless, and ipv6 GRE fixes that will be built on top of in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-04ssb: unregister gpios before unloading ssbHauke Mehrtens
This patch unregisters the gpio chip before ssb gets unloaded. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: add gpio_to_irqHauke Mehrtens
The old bcm47xx gpio code had support for gpio_to_irq, but the new code did not provide this function, but returned -ENXIO all the time. This patch adds the missing function. arch/mips/bcm47xx/wgt634u.c calls gpio_to_irq() and got the correct irq number with the old gpio handling code. With this patch the code in wgt634u.c should work again. I do not have a wgt634u to test this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: register platform device for parallel flashRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ssb: trivial: use pflash helper variableRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-11ssb: add database of serial flash memoriesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-09ssb: add place for serial flash driverRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) New sysctl ndisc_notify needs some documentation, from Hanns Frederic Sowa. 2) Netfilter REJECT target doesn't set transport header of SKB correctly, from Mukund Jampala. 3) Forcedeth driver needs to check for DMA mapping failures, from Larry Finger. 4) brcmsmac driver can't use usleep_range while holding locks, use udelay instead. From Niels Ole Salscheider. 5) Fix unregister of netlink bridge multicast database handlers, from Vlad Yasevich and Rami Rosen. 6) Fix checksum calculations in netfilter's ipv6 network prefix translation module. 7) Fix high order page allocation failures in netfilter xt_recent, from Eric Dumazet. 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because mac802154_process_data() can execute in process rather than interrupt context. From Alexander Aring. 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one tcp_push() too many. From Eric Dumazet and Willy Tarreau. 10) Fix skb->truesize tracking in XEN netfront driver, from Ian Campbell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) xen/netfront: improve truesize tracking ipv4: fix NULL checking in devinet_ioctl() tcp: fix MSG_SENDPAGE_NOTLAST logic net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. ip-sysctl: fix spelling errors mac802154: fix NOHZ local_softirq_pending 08 warning ipv6: document ndisc_notify in networking/ip-sysctl.txt ath9k: Fix Kconfig for ATH9K_HTC netfilter: xt_recent: avoid high order page allocations netfilter: fix missing dependencies for the NOTRACK target netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. vxlan: allow live mac address change bridge: Correctly unregister MDB rtnetlink handlers brcmfmac: fix parsing rsn ie for ap mode. brcmsmac: add copyright information for Canonical rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call ...
2013-01-03Drivers: ssb: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Michael Buesch <m@bues.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-02ssb: SSB_DRIVER_GPIO should depend on GPIOLIB instead of selecting itGeert Uytterhoeven
Commit ec43b08b5733494ad88aa618ecdf534320dd8207 ("ssb: add GPIO driver") added SSB_DRIVER_GPIO, which unconditionally selects GPIOLIB, causing a Kconfig warning: warning: (ARCH_REQUIRE_GPIOLIB && SSB_DRIVER_GPIO && BCMA_DRIVER_GPIO && MFD_TC6393XB && FB_VIA) selects GPIOLIB which has unmet direct dependencies (ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB) and build failure for m68k/allmodconfig: In file included from drivers/ssb/ssb_private.h:5, from drivers/ssb/main.c:12: include/linux/ssb/ssb.h:440: error: field ‘gpio’ has incomplete type make[4]: *** [drivers/ssb/main.o] Error 1 make[3]: *** [drivers/ssb/] Error 2 Turn the select into a dependency to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>