summaryrefslogtreecommitdiff
path: root/drivers/staging/rtl8192e
AgeCommit message (Collapse)Author
2017-05-25staging: rtl8192e: GetTs Fix invalid TID 7 warning.Malcolm Priestley
commit 95d93e271d920dfda369d4740b1cc1061d41fe7f upstream. TID 7 is a valid value for QoS IEEE 802.11e. The switch statement that follows states 7 is valid. Remove function IsACValid and use the default case to filter invalid TIDs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.Malcolm Priestley
commit 90be652c9f157d44b9c2803f902a8839796c090d upstream. EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25staging: rtl8192e: fix 2 byte alignment of register BSSIDR.Malcolm Priestley
commit 867510bde14e7b7fc6dd0f50b48f6753cfbd227a upstream. BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.Malcolm Priestley
commit baabd567f87be05330faa5140f72a91960e7405a upstream. The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-02staging: rtl8188eu: core: rtw_xmit: Use macros instead of constantsGeorgiana Rodica Chelu
Replace the 0x888e with ETH_P_PAE and 0x0806 with ETH_P_ARP. These macros can be found in drivers/staging/rtl8192e/rtllib.h Hexadecimal numbers are not case sensitive, therefore 0x888e is equal with 0x888E. The modifications improve the readability of the code. Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed use a blank line after function/struct/union/enum ↵Darryl T. Agostinelli
declarations fixed use a blank line after function/struct/union/enum declarations Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed statements should start on a tabstopDarryl T. Agostinelli
fixed statements should start on a tabstop Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28staging: rtl8192e: fixed block comments use * on subsequent linesDarryl T. Agostinelli
fixed block comments use * on subsequent lines Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-26staging: rtl8192e: fixed block comments should align the * on each lineDarryl T. Agostinelli
shifted over comment block one space Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-20staging: rtl8192e: Insert blank line after function declarationNamrata A Shettar
Insert blank line after function declaration to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-20staging: rtl8192e: Add space around binary operator '+'Namrata A Shettar
Add space around binary operator '+' to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-20staging: rtl8192e: Remove unnecessary blank linesNamrata A Shettar
Remove unneccessary blank lines to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-20staging: rtl8192e: Add space around '+'Namrata A Shettar
Add space around '+' to resolve checkpatch issue. Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-18Staging: rtl8192e: Use !x instead of x == NULLSandhya Bankar
Use !x instead of x == NULL. This patch was found by checkpatch. Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12Staging: rtl8192e: mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/staging/rtl8192e/rtllib_softmac.c:279:13: warning: no previous declaration for 'softmac_ps_mgmt_xmit' [-Wmissing-declarations] drivers/staging/rtl8192e/rtllib_softmac.c:773:24: warning: no previous declaration for 'rtllib_authentication_req' [-Wmissing-declarations] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. In addition, some of these functions are declared in different files, it looks like that we need to clean the codes of this driver up, but we can repress these warnings first, then clean it up. so this patch marks these functions with 'static' now. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12staging: rtl8192e: constify local structuresJulia Lawall
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21rtl8192e: Replace semaphore ips_sem with mutexBinoy Jayan
The semaphore 'ips_sem' in the rtl8192e is a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21rtl8192e: Replace semaphore scan_sem with mutexBinoy Jayan
The semaphore 'scan_sem' in the rtl8192e is a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21rtl8192e: Replace semaphore rf_sem with mutexBinoy Jayan
The semaphore 'rf_sem' in the rtl8192e is a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21rtl8192e: r8192_priv: Replace semaphore wx_sem with mutexBinoy Jayan
The semaphore 'wx_sem' in the r8192_priv is a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21rtl8192e: rtllib_device: Replace semaphore wx_sem with mutexBinoy Jayan
The semaphore 'wx_sem' in the rtllib_device is a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21staging/rtl8192e: avoid comparing unsigned type >= 0Arnd Bergmann
There is one remaining warning about a type limit check in rtl8192e: staging/rtl8192e/rtl819x_TSProc.c:326:14: error: comparison is always true due to limited range of data type [-Werror=type-limits] This changes a macro into a local function to clarify the types and simplify the check while removing the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21staging/rtl8192e: use s8 instead of charArnd Bergmann
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of incorrect code that results from 'char' being unsigned here, e.g. staging/rtl8192e/rtl8192e/r8192E_phy.c:1072:36: error: comparison is always false due to limited range of data type [-Werror=type-limits] staging/rtl8192e/rtl8192e/r8192E_phy.c:1104:36: error: comparison is always false due to limited range of data type [-Werror=type-limits] staging/rtl8192e/rtl8192e/rtl_core.c:1987:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] staging/rtl8192e/rtl8192e/rtl_dm.c:782:37: error: comparison is always false due to limited range of data type [-Werror=type-limits] staging/rtl8192e/rtllib_softmac_wx.c:465:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] This patch changes all uses of 'char' in this driver that refer to 8-bit integers to use 's8' instead, which is signed on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04drivers: replace dev->trans_start accesses with dev_trans_startFlorian Westphal
a trans_start struct member exists twice: - in struct net_device (legacy) - in struct netdev_queue Instead of open-coding dev->trans_start usage to obtain the current trans_start value, use dev_trans_start() instead. This is not exactly the same, as dev_trans_start also considers the trans_start values of the netdev queues owned by the device and provides the most recent one. For legacy devices this doesn't matter as dev_trans_start can cope with netdev trans_start values of 0 (they are ignored). This is a prerequisite to eventual removal of dev->trans_start. Cc: linux-rdma@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-03-12staging: rtl8192e: rtllib_crypt_tkip: Remove unnecessary else after returnBhaktipriya Shridhar
This patch fixes the checkpatch warning that else is not generally useful after a break or return. This was done using Coccinelle: @@ expression e2; statement s1; @@ if(e2) { ... return ...; } -else s1 Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12Staging: rtl8192e: Replace random_ether_addr with eth_random_addrBhumika Goyal
The macro random_ether_addr is calling the function eth_random_addr. Therefore, the call to random_ether_addr can be replaced with eth_random_addr. Remove the wrapper function rtllib_randomize_cell and replace its call with eth_random_addr as it is wrapping random_ether_addr. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12staging: rtl8192e: Drop cast on void pointerJanani Ravichandran
Void pointers need not be cast to other pointer types. Semantic patch used: @r@ expression x; void *e; type T; identifier f; @@ ( *((T *)e) | ((T *)x) [...] | ((T *)x)->f | - (T *) e ) Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12staging: rtl8192e: rtl8192e: Remove create_workqueue()Amitoj Kaur Chawla
With conccurency managed workqueues, use of dedicated workqueues can be replaced by system_wq. Drop priv_wq by using system_wq. Since there are multiple work items per priv but they do not need to be ordered, increase of concurrency by switching to system_wq should not break anything. All work items are sync canceled on so it is guaranteed that no work is running when rtl92e_suspend function is called. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12drivers: staging: rtl8192e: rtllib_rx.c: Fix blank lines before a close braceTapan Prakash T
Fixed checkpatch.pl issue 'Blank lines aren't necessary before a close brace' Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12drivers: staging: rtl8192e: rtllib_rx.c: Fix code indent for conditional ↵Tapan Prakash T
statement Fixed checkpatch.pl warning 'suspect code indent for conditional statements' Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12staging: rtl8192e: Prefer using macro DIV_ROUND_UPBhaktipriya Shridhar
The macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /(d)). It clarifies the divisor calculations. This was done using the coccinelle script: @@ expression e1; expression e2; @@ ( - ((e1) + e2 - 1) / (e2) + DIV_ROUND_UP(e1,e2) | - ((e1) + (e2 - 1)) / (e2) + DIV_ROUND_UP(e1,e2) ) Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-12staging: rtl8192e: Remove create_workqueue()Amitoj Kaur Chawla
With conccurency managed workqueues, use of dedicated workqueues can be replaced by system_wq. Drop wq by using system_wq. Since there are multiple work items per rtllib but they do not need to be ordered, increase of concurrency by switching to system_wq should not break anything. All work items are sync canceled on rtllib_stop_protocol() so it is guaranteed that no work is running when rtl92e_disable/reset/restart functions are called. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20staging: rtl8192e: Drop useless initialisationBhaktipriya Shridhar
Removed initialisation of a varible if it is immediately reassigned. Changes were made using Coccinelle. @@ type T; constant C; expression e; identifier i; @@ T i - = C ; i = e; Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-20staging: rtl8192e: Remove explicit pointer cast in assignmentsJanani Ravichandran
In this file, the values returned by rtllib_priv() are unnecessarily cast into a pointer type in some assignment statements. Remove the cast as it is unneeded. Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-12staging: rtl8192e: prefer using eth_broadcast_addr()Hari Prasath Gujulan Elango
Prefer using the eth_broadcast_addr() instead of memset to broadcast address 0xFF to the array. Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08staging: rtl8192e: use to_delayed_workGeliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08staging: rtl8192e: Clean unnecessary blank linesAmadeusz Pawlik
Fixes a couple of issues detected by checkpatch with regard to blank lines. Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08staging: rtl8192e: remove unnecessary multiple blank linesChristian Colic
remove multiple blank lines to fix some checkpatch checks Signed-off-by: Christian Colic <colic.christian@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08staging:rtl8192e: Usage count off by oneSean MacLennan
The rtllib driver is not calling try_module_get() when loading the encryption modules. Because of this, you can never remove the module once you have used it one (i.e. bring up the wireless interface). Signed-off-by: Sean MacLennan <seanm@seanm.ca> Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27staging: rtl8192e: Replace uses of obsolete blkcipher and hashHerbert Xu
The interfaces blkcipher and hash are obsolete. This patch replaces them with skcipher and ahash respectively. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-16staging: rtl8192e: Remove unnecessary variableAmitoj Kaur Chawla
This patch removes unnecessary variable by using a single line of code instead. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: _rtl92e_fw_boot_cpu: Remove unneeded gotoMateusz Kulikowski
Drop ugly label as no resource cleanup is needed. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: fw: Use netdev_dbg instead of RT_TRACEMateusz Kulikowski
Drop legacy logging system. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: Remove _rtl92e_fw_download_code()Mateusz Kulikowski
Reuse rtl92e_send_cmd_pkt() instead. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: Swap firmware endian in _rtl92e_fw_prepare()Mateusz Kulikowski
Remove endian swap from _rtl92e_fw_download_code(), this way it can be replaced with _rtl92e_send_cmd_pkt(). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: Add _rtl92e_fw_prepareMateusz Kulikowski
Add function to request and prepare firmware image. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: Add _rtl92e_wait_for_fw()Mateusz Kulikowski
Add function waiting for firmware load/boot; Remove _rtl92e_is_fw_ready() that is obsolete (can be replaced with _rtl92e_wait_for_fw(). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25staging: rtl8192e: init_fw: Drop unneded checkMateusz Kulikowski
rst_opt is always equal to OPT_SYSTEM_RESET in this scope. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-07-27 14:40:23 (GMT)