summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2014-07-22Merge branches 'exynos-fix', 'for-rc', 'int3403-fix', 'misc', 'rcar-thermal' ↵Zhang Rui
and 'sti-thermal' of .git into next
2014-07-22thermal: cpu_cooling: fix typo highjack -> hijackJavi Merino
Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: samsung: Add TMU support for Exynos3250 SoCChanwoo Choi
This patch add registers, bit fields and compatible strings for Exynos3250 TMU (Thermal Management Unit). Exynos3250 uses the Cortex-A7 dual cores and has a target speed of 1.0 GHz. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Add MUX address setting bits by Jonghwa Lee] Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Amit Daniel Kachhap<amit.daniel@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: exynos: fix ordering in exynos_tmu_remove()Bartlomiej Zolnierkiewicz
It might not be a problem currently but unregister/uninitialize things in the reverse order that they are registered/initialized. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: allow building dove_thermal with mvebuRiku Voipio
DT-enabled Dove has moved from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE to thermal Kconfig. This was originally supposed to go in via "ARM: dove: prepare new Dove DT Kconfig" patch from Sebastian Hesselbarth for 3.15, but slipped through the cracks. I've tested on CuBox that without this patch you can't compile dove_thermal into a mach-mvebu based kernel, and with this patch I can build the driver and it works as expected run-time. v2: non-ascii char creeped in somehow Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: sti: Add support for ST's Memory Mapped based Thermal controllerLee Jones
This is the traditional way of obtaining a device driver's register address space. The aim of this driver is to supply controller specific information to the ST Thermal Core. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: sti: Add support for ST's System Config Register based Thermal ↵Lee Jones
controller Supply controller specific information to the ST Thermal Core. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-15thermal: sti: Introduce ST Thermal core codeLee Jones
This core is shared by both ST's 'memory mapped' and 'system configuration register' based Thermal controllers. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-01thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checkedRickard Strandqvist
Wrong address is checked after memory allocation. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-01Thermal: imx: correct critical trip temperature settingAnson Huang
On latest i.MX6 SOC with thermal calibration data of 0x5A100000, the critical trip temperature will be an invalid value and cause system auto shutdown as below log: thermal thermal_zone0: critical temperature reached(42 C),shutting down So, with universal formula for thermal sensor, only room temperature point is calibrated, which means the calibration data read from fuse only has valid data of bit [31:20], others are all 0, the critical trip point temperature can NOT depend on the hot point calibration data, here we set it to 20 C higher than default passive temperature. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-30thermal: Bind cooling devices with the correct argumentsPunit Agrawal
When binding cooling devices to thermal zones created from the device tree the minimum and maximum cooling states are in the wrong order leading to failure to bind. Fix the order of cooling states in the call to thermal_zone_bind_cooling_device to fix this. Cc:Zhang Rui <rui.zhang@intel.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-30thermal: Add braces around suspect codeStephen Boyd
It looks like this code is missing braces, otherwise the if statement shouldn't have been indented. Fix it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-30thermal: hwmon: Make the check for critical temp valid consistentAaron Lu
On 05/21/2014 04:22 PM, Aaron Lu wrote: > On 05/21/2014 01:57 PM, Kui Zhang wrote: >> Hello, >> >> I get following error when rmmod thermal. >> >> rmmod thermal >> Killed While dealing with this problem, I found another problem that also results in a kernel crash on thermal module removal: From: Aaron Lu <aaron.lu@intel.com> Date: Wed, 21 May 2014 16:05:38 +0800 Subject: [PATCH] thermal: hwmon: Make the check for critical temp valid consistent We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp) to decide if we need to create the temp_crit attribute file but we just check if tz->ops->get_crit_temp exists to decide if we need to remove that attribute file. Some ACPI thermal zone doesn't have a valid critical trip point and that would result in removing a non-existent device file on thermal module unload. Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-30Thermal: int3403: Add CRT and PSV tripSrinivas Pandruvada
The ACPI object definition can contain passive and critical trip temperature. Export them via thermal sysfs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-06-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Specifics: - fix a bug in Exynos thermal driver, which overwrites the hardware trip point threshold when updating software trigger levels and results in emergency shutdown. From: Tushar Behera. - add thermal sensor support for Armada 375 and 38x SoCs. From Ezequiel Garcia. - add TMU (Thermal Management Unit) support for Exynos5260 and Exynos5420 SoCs. From Naveen Krishna Chatradhi. - add support for the additional digital temperature sensors in the Intel SoCs like Bay Trail. From: Srinivas Pandruvada. - a couple of cleanups and small fixes from Jingoo Han, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Jacob Pan, Paul Walmsley and Lan,Tianyu" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (21 commits) thermal: spear: remove unnecessary OOM messages thermal: exynos: remove unnecessary OOM messages thermal: rcar: remove unnecessary OOM messages thermal: armada: Support Armada 380 SoC thermal: armada: Support Armada 375 SoC thermal: armada: Allow to specify an 'inverted readout' sensor thermal: armada: Pass the platform_device to init_sensor() thermal: armada: Add generic infrastructure to handle the sensor thermal: armada: Add infrastructure to support generic formulas thermal: armada: Rename armada_thermal_ops struct thermal/intel_powerclamp: add newer cpu ids thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync() thermal: samsung: Only update available threshold limits Thermal/int3403: Fix thermal hysteresis unit conversion thermal: Intel SoC DTS thermal thermal: samsung: Add TMU support for Exynos5260 SoCs thermal: samsung: Add TMU support for Exynos5420 SoCs thermal: samsung: change base_common to more meaningful base_second thermal: samsung: replace inten_ bit fields with intclr_ thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined ...
2014-05-15Merge branches 'armada-375-380-soc-support', 'eduardo-thermal-soc-fixes', ↵Zhang Rui
'intel-soc-dts-thermal' and 'thermal-soc-fixes' of .git into next
2014-05-15thermal: spear: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: exynos: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: rcar: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Support Armada 380 SoCEzequiel Garcia
Now that a generic infrastructure is in place, it's possible to support the Armada 380 SoC thermal sensor. This sensor is similar to the one available in the already supported SoCs, with its specific temperature formula and specific sensor initialization. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Support Armada 375 SoCEzequiel Garcia
Now that a generic infrastructure is in place, it's possible to support the new Armada 375 SoC thermal sensor. This sensor is similar to the one available in the already supported SoCs, with its specific temperature formula and specific sensor initialization. In addition, we also add support for the Z1 SoC stepping, which needs an initialization-quirk to work properly. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Allow to specify an 'inverted readout' sensorEzequiel Garcia
In order to support inverted-formula thermal sensor readout, this commit introduces an 'inverted' field in the SoC-specific structure which allows to specify an inversion of the temperature formula. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Pass the platform_device to init_sensor()Ezequiel Garcia
In order to perform SoC-specific quirks on platforms that need them, this commit adds a new parameter to the init_sensor() function. This will be used to support early silicons of the Armada 375 SoC, to workaround some hardware issues. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Add generic infrastructure to handle the sensorEzequiel Garcia
In order to support similar SoC where the sensor value and valid bit can have different shifts and/or mask, we add such fields to the per-variant structure, instead of having the values hardcoded. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Add infrastructure to support generic formulasEzequiel Garcia
In order to support other similar SoC, with different sensor coefficients, this commit adds the coeficients to the per-variant structure, instead of having the formula hardcoded. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: armada: Rename armada_thermal_ops structEzequiel Garcia
As preparation work to add a generic infrastructure to support different SoC variants, the armada_thermal_ops will be used to host the SoC-specific fields, such as formula values and register shifts. For this reason, the name armada_thermal_ops is no longer suitable, and this commit replaces it with armada_thermal_data. Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal/intel_powerclamp: add newer cpu idsJacob Pan
Add support for Broadwell and Valleyview CPUs Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
2014-05-15thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()Geert Uytterhoeven
There's no need for this to be synchronous Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: samsung: Only update available threshold limitsTushar Behera
Currently the threshold limits are updated in 2 stages, once for all software trigger levels and again for hardware trip point. While updating the software trigger levels, it overwrites the threshold limit for hardware trip point thereby forcing the Exynos core to issue an emergency shutdown. Updating only the required fields in threshold register fixes this issue. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15Merge branch 'next' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc-fixes
2014-05-15Thermal/int3403: Fix thermal hysteresis unit conversionlan,Tianyu
Thermal hysteresis represents a temperature difference. But the original code treats it as a temperature value, Convert it from tenths of degree Kelvin to Milli-Celsius by deducing 273200. This is not right. Kelvin and Celsius have same degree size. From temperature difference view, the conversion between tenths of degree Kelvin unit and Milli-Celsius unit is just to multiply 100. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: Intel SoC DTS thermalSrinivas Pandruvada
In the Intel SoCs like Bay Trail, there are 2 additional digital temperature sensors(DTS), in addition to the standard DTSs in the core. Also they support 4 programmable thresholds, out of which two can be used by OSPM. These thresholds can be used by OSPM thermal control. Out of these two thresholds, one is used by driver and one user mode can change via thermal sysfs to get notifications on threshold violations. The driver defines one critical trip points, which is set to TJ MAX - offset. The offset can be changed via module parameter (default 5C). Also it uses one of the thresholds to get notification for this temperature violation. This is very important for orderly shutdown as the many of these devices don't have ACPI thermal zone, and expects that there is some other thermal control mechanism present in OSPM. When a Linux distro is used without additional specialized thermal control program, BIOS can do force shutdown when thermals are not under control. When temperature reaches critical, the Linux thermal core will initiate an orderly shutdown. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-06thermal: samsung: Add TMU support for Exynos5260 SoCsNaveen Krishna Chatradhi
This patch adds the registers, bit fields and compatible strings required to support for the 5 TMU channels on Exynos5260. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-06thermal: samsung: Add TMU support for Exynos5420 SoCsNaveen Krishna Chatradhi
Exynos5420 has 5 TMU channels, the TRIMINFO register is misplaced for TMU channels 2, 3 and 4 TRIMINFO at 0x1006c000 contains data for TMU channel 3 TRIMINFO at 0x100a0000 contains data for TMU channel 4 TRIMINFO at 0x10068000 contains data for TMU channel 2 This patch 1 Adds the neccessary register changes and arch information to support Exynos5420 SoCs. 2. Handles the gate clock for misplaced TRIMINFO register 3. Updates the Documentation at Documentation/devicetree/bindings/thermal/exynos-thermal.txt Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-06thermal: samsung: change base_common to more meaningful base_secondNaveen Krishna Chatradhi
On Exynos5440 and Exynos5420 there are registers common across the TMU channels. To support that, we introduced a ADDRESS_MULTIPLE flag in the driver and the 2nd set of register base and size are provided in the "reg" property of the node. As per Amit's suggestion, this patch changes the base_common to base_second and SHARED_MEMORY to ADDRESS_MULTIPLE. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-06thermal: samsung: replace inten_ bit fields with intclr_Naveen Krishna Chatradhi
This patch replaces the inten_rise_shift/mask and inten_fall_shift/mask with intclr_rise_shift/mask and intclr_fall_shift/mask respectively. Currently, inten_rise_shift/mask and inten_fall_shift/mask bits are only used to configure intclr related registers. Description of H/W: The offset for the bits in the CLEAR register are not consistent across TMU modules in Exynso5250, 5420 and 5440. On Exynos5250, the FALL interrupt related en, status and clear bits are available at an offset of 16 in INTEN, INTSTAT registers and at an offset of 12 in INTCLEAR register. On Exynos5420, the FALL interrupt related en, status and clear bits are available at an offset of 16 in INTEN, INTSTAT and INTCLEAR registers. On Exynos5440, the FALL_IRQEN bits are at an offset of 4 and the RISE_IRQEN bits are at an offset of 0 Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-06thermal: offer Samsung thermal support only when ARCH_EXYNOS is definedBartlomiej Zolnierkiewicz
Menu for Samsung thermal support is visible on all Samsung platforms while thermal drivers are currently available only for EXYNOS SoCs. Fix it by replacing PLAT_SAMSUNG dependency with ARCH_EXYNOS one. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-06thermal: ti-soc-thermal: clk_round_rate() can return a zero upon errorPaul Walmsley
Treat both negative and zero return values from clk_round_rate() as errors. This is needed since subsequent patches will convert clk_round_rate()'s return value to be an unsigned type, rather than a signed type, since some clock sources can generate rates higher than (2^31)-1 Hz. Eventually, when calling clk_round_rate(), only a return value of zero will be considered a error. All other values will be considered valid rates. The comparison against values less than 0 is kept to preserve the correct behavior in the meantime. This patch also gets rid of a comparison between unsigned and signed values; a side-benefit. Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-04-29thermal: cpu_cooling: Use cpufreq_for_each_valid_entry macro for iterationStratos Karafotis
The cpufreq core now supports the cpufreq_for_each_valid_entry macro helper for iteration over the cpufreq_frequency_table, so use it. Also remove the redundant !! operator. It should have no functional changes. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-10Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "We only have a couple of fixes/cleanups for platform thermal drivers this time. Specifics: - rcar thermal driver: avoid updating the thermal zone in case an IRQ was triggered but the temperature didn't effectively change. From Patrick Titiano. - update the imx thermal driver' formula of converting thermal sensor' raw date to real temperature in degree C. From Anson Huang. - trivial code cleanups of ti soc thermal and rcar thermal driver from Jingoo Han and Patrick Titiano" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar-thermal: update thermal zone only when temperature changes thermal: rcar-thermal: fix same mask applied twice thermal: ti-soc-thermal: Use SIMPLE_DEV_PM_OPS macro thermal: imx: update formula for thermal sensor
2014-04-08thermal: rcar-thermal: update thermal zone only when temperature changesPatrick Titiano
Avoid updating the thermal zone in case an IRQ was triggered but the temperature didn't effectively change. Note this is not a driver issue. Below is a captured debug trace illustrating the purpose of this patch: out of 8 thermal zone updates, only 2 are actually necessary. [ 41.120000] rcar_thermal_work(): cctemp=25000 [ 41.120000] rcar_thermal_work(): nctemp=30000 [ 41.120000] rcar_thermal_work(): temp is now 30000C, update thermal zone [ 58.990000] rcar_thermal_work(): cctemp=30000 [ 58.990000] rcar_thermal_work(): nctemp=30000 [ 58.990000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.290000] rcar_thermal_work(): cctemp=30000 [ 59.290000] rcar_thermal_work(): nctemp=30000 [ 59.290000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.590000] rcar_thermal_work(): cctemp=30000 [ 59.590000] rcar_thermal_work(): nctemp=30000 [ 59.590000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.890000] rcar_thermal_work(): cctemp=30000 [ 59.890000] rcar_thermal_work(): nctemp=30000 [ 59.890000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.190000] rcar_thermal_work(): cctemp=30000 [ 60.190000] rcar_thermal_work(): nctemp=30000 [ 60.190000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.490000] rcar_thermal_work(): cctemp=30000 [ 60.490000] rcar_thermal_work(): nctemp=30000 [ 60.490000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.790000] rcar_thermal_work(): cctemp=30000 [ 60.790000] rcar_thermal_work(): nctemp=35000 [ 60.790000] rcar_thermal_work(): temp is now 35000C, update thermal zone I suspect this may be due to sensor sampling accuracy / fluctuation, but no formal proof. Signed-off-by: Patrick Titiano <ptitiano@baylibre.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08thermal: rcar-thermal: fix same mask applied twicePatrick Titiano
Mask is already applied preceding the if statement. Remove the second mask. Signed-off-by: Patrick Titiano <ptitiano@baylibre.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08thermal: ti-soc-thermal: Use SIMPLE_DEV_PM_OPS macroJingoo Han
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08thermal: imx: update formula for thermal sensorAnson Huang
Thermal sensor used to need two calibration points which are in fuse map to get a slope for converting thermal sensor's raw data to real temperature in degree C. Due to the chip calibration limitation, hardware team provides an universal formula to get real temperature from internal thermal sensor raw data: Slope = 0.4297157 - (0.0015976 * 25C fuse); Update the formula, as there will be no hot point calibration data in fuse map from now on. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-03-20thermal, x86-pkg-temp: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the thermal x86-pkg-temp code by using this latter form of callback registration. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-03Thermal: thermal zone governor fixZhang Rui
This patch does a cleanup about the thermal zone govenor, setting and make the following rule. 1. For thermal zone devices that are registered w/o tz->tzp, they can use the default thermal governor only. 2. For thermal zone devices w/ governor name specified in tz->tzp->governor_name, we will use the default govenor if the governor specified is not available at the moment, and update tz->governor when the matched governor is registered. This also fixes a problem that OF registered thermal zones are running with no governor. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Javi Merino <javi.merino@arm.com>
2014-03-03Thermal: Allow first update of cooling device stateNi Wade
In initialization, if the cooling device is initialized at max cooling state, and the thermal zone temperature is below the first trip point, then the cooling state can't be updated to the right state, untill the first trip point be triggered. To fix this issue, allow first update of cooling device state during registration, initialized "updated" device field as "false" (instead of "true"). Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-03-03thermal,rcar_thermal: Add dependency on HAS_IOMEMRichard Weinberger
Commit beeb5a1e (thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST) broke build on archs wihout io memory. On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/thermal/rcar_thermal.c:404: undefined reference to `devm_ioremap_resource' drivers/thermal/rcar_thermal.c:426: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>