summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2011-11-22Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: ldisc, wait for ldisc infinitely in hangup TTY: ldisc, move wait idle to caller TTY: ldisc, allow waiting for ldisc arbitrarily long Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" RS485: fix inconsistencies in the meaning of some variables pch_uart: Fix DMA resource leak issue serial,mfd: Fix CMSPAR setup tty/serial: Prevent drop of DCD on suspend for Tegra UARTs pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_uart: Support new device LAPIS Semiconductor ML7831 IOH pch_uart: Fix hw-flow control issue tty: hvc_dcc: Fix duplicate character inputs jsm: Change maintainership
2011-11-17TTY: ldisc, wait for ldisc infinitely in hangupJiri Slaby
For /dev/console case, we do not kill all ldisc users. It's due to redirected_tty_write test in __tty_hangup. In that case there still might be a process waiting e.g. in n_tty_read for input. We wait for such processes to disappear. The problem is that we use a timeout. After this timeout, we continue closing the ldisc and start freeing tty resources. It obviously leads to crashes when the other process is woken. So to fix this, we wait infinitely before reiniting the ldisc. (The tiocsetd remains untouched -- times out after 5s.) This is nicely reproducible with this run from shell: exec 0<>/dev/console 1<>/dev/console 2<>/dev/console and stopping a getty like: systemctl stop serial-getty@ttyS0.service The crash proper may be produced only under load or with constified timing the same as for 92f6fa09b. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17TTY: ldisc, move wait idle to callerJiri Slaby
It is the only place where reinit is called from. And we really need to wait for the old ldisc to go once. Actually this is the place where the waiting originally was (before removed and re-added later). This will make the fix in the following patch easier to implement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17TTY: ldisc, allow waiting for ldisc arbitrarily longJiri Slaby
To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely long for ldisc to be gone. So here we add a parameter to tty_ldisc_wait_idle to allow that. This is only a preparation for the real fix which is done in the following patches. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dmitriy Matrosov <sgf.dma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-16Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"Greg Kroah-Hartman
This reverts commit 9636b755da7b498094bdf15b4ce9f6fd16995e4e. It wasn't supposed to be applied, thanks to Doug for letting me know. Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15RS485: fix inconsistencies in the meaning of some variablesClaudio Scordino
The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the serial_rs485 structure in a different way. In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead, uses these values to know if a delay must be set before and after sending. This patch makes the usage of these variables consistent across all drivers and fixes the Documentation as well. From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be understood by looking only at the value of delay_rts_before_send and delay_rts_after_send. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Darron Black <darron@griffin.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_uart: Fix DMA resource leak issueTomoya MORINAGA
Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get DMA channel resource. setserial /dev/ttyPCH0 ^low_latency setserial /dev/ttyPCH0 low_latency CAUSE: Changing mode using setserial command, ".startup" function which gets DMA channel is called before ".verify_port" function which sets dma-flag(use_dma/use_dma_flag) as 1. PIO->DMA .startup: Since dma-flag is 0, DMA channel is not requested. .verify_port: dma-flag is set as 1. .shutdown: N/A DMA->PIO .startup: Since dma-flag is 1, DMA channel is requested. .verify_port: dma-flag is set as 0. .shutdown: Since dma-flag is 0, DMA channel is not released. This means DMA channel resource leak occurs. Next time, this driver can't get DMA channel resource forever. MODIFICATION: Currently, when release DMA channel resource, this driver checks dma-flag. However, this specification occurs the above issue. This driver must check whether dma_request_channel is executed or not. The values are saved in private data variable "chan_tx/chan_tx". These variables mean if the value is NULL, DMA channel is not requested, if not NULL, DMA channel is requested. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15serial,mfd: Fix CMSPAR setupAlan Cox
This is referenced the wrong way. Mika Westerberg added some checks to the tty to support multiple console, but the real problem is simply referencing the termios object via the wrong path. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15tty/serial: Prevent drop of DCD on suspend for Tegra UARTsDoug Anderson
On Tegra UARTs (except UART1), the DTR / DCD / DSR lines are not externally accessible. Instead, the DTR line internally appears to be looped back to be the input to the DCD and DSR lines. The net effect of this is that when we drop DTR (like when we suspend), we'll see DCD drop too. ...and when we see DCD drop, we treat that as a hangup. In order to prevent this hangup from occurring at every sleep, we need to force DTR to remain high on Tegra UARTs. This patch uses the mcr_mask / mcr_force fields, which were originally added for the kludge ALPHA_KLUDGE_MCR. Using these fields does not prevent us from removing ALPHA_KLUDGE_MCR--we can just remove the "if" tests I have added and always init mcr_mask / mcr_force from the serial8250_config. NOTE: If we have people that are using UARTA on a Tegra and need to control DTR, we'll need to either add a separate port type for UARTA or we'll need to add some tegra-specific code to detect whether the DTR needs to be left high. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_uart: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15pch_uart: Fix hw-flow control issueTomoya MORINAGA
Using hardware flow control, currently, register of the control-bit(AFE) is not set. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15tty: hvc_dcc: Fix duplicate character inputsStephen Boyd
Reading from the DCC grabs a character from the buffer and clears the status bit. Since this is a context-changing operation, instructions following the character read that rely on the status bit being accurate need to be synchronized with an ISB. In this case, the status bit check needs to execute after the character read otherwise we run the risk of reading the character and checking the status bit before the read can clear the status bit in the first place. When this happens, the user will see the same character they typed twice, instead of once. Add an ISB after the read and the write, so that the status check is synchronized with the read/write operations. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-11Merge branches 'sh/pm-runtime' and 'common/clkfwk' into sh-fixes-for-linusPaul Mundt
2011-11-08n_gsm: Fix timingsAlan Cox
Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Revert "hvc_console: display printk messages on console."Linus Torvalds
This reverts commit 361162459f62dc0826b82c9690a741a940f457f0. It causes an infinite loop when booting Linux under Xen, as so: [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled ... as reported by Konrad Rzeszutek Wilk. And Rusty reports the same for lguest. He goes on to say: "This is not a concurrency problem: the issue seems to be that calling register_console() twice on the same struct console is a bad idea." and Greg says he'll fix it up properly at some point later. Revert for now. Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: Rusty Russell <rusty@ozlabs.org> Requested-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Miche Baker-Harvey <miche@google.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07powerpc: fix building hvc_opal.cMichael Neuling
Fix building following build error: drivers/tty/hvc/hvc_opal.c:244:12: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Michael Neuling <mikey@neuling.org> [ New file from powerpc tree not following the new rules from the module.h split, both of which were merged today. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-05Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-04serial: sh-sci: Fix up SH-2A SCIF support.Phil Edworthy
This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Tested-by: Federico Fuga <fuga@studiofuga.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02um: switch to use of drivers/KconfigAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-10-31tty: Add export.h for EXPORT_SYMBOL/THIS_MODULE to exportersPaul Gortmaker
With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31tty: Add module.h to drivers/tty users who just expect it there.Paul Gortmaker
We are cleaning up the issue that means module.h is omnipresent. These tty users are the people who implictly are relying on that. Fix up the real users to call out the include that they really need. In the case of jsm_driver.c file, it had moduleparam.h but that isn't enough and it needs the full module.h Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30Merge branches 'msm/dt', 'imx/dt' and 'at91/dt' into next/dtArnd Bergmann
2011-10-29Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
2011-10-27Merge branch 'clk' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-27Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: of_mdio: Don't phy_scan_fixups() twice Devicetree: Expand on ARM Primecell binding documentation dt: Add empty of_match_node() macro dt: add empty dt helpers for non-dt build devicetree: fix build error on drivers/tty/serial/altera_jtaguart.c devicetree: Add ARM pl022 spi controller binding doc devicetree: Add ARM pl061 gpio controller binding doc of/irq: of_irq_find_parent: check for parent equal to child MAINTAINERS: update devicetree maintainers dt: add helper to read 64-bit integers tty: use of_match_ptr() for of_match_table entry OF: Add of_match_ptr() macro dt: add empty for_each_child_of_node, of_find_property devicetree: Document Qualcomm and Atmel prefixes serial/imx: add of_alias_get_id() reference back dt: add of_alias_scan and of_alias_get_id devicetree: Add a registry of vendor prefixes
2011-10-26Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24drivercore: Add helper macro for platform_driver boilerplateGrant Likely
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-24Merge commit 'v3.1' into devicetree/nextGrant Likely
2011-10-19TTY: serial_core: Fix crash if DCD drop during suspendDoug Anderson
This crash was showing up 100% of the time on Tegra CPUs when an agetty was running on the serial port and the console was not running on the serial port. The reason the Tegra saw it so reliably is that the Tegra CPU internally ties DTR to DCD/DSR. That means when we dropped DTR during suspend we would get always get an immediate DCD drop. The specific order of operations that were running: * uart_suspend_port() would be called to put the uart in suspend mode * we'd drop DTR (ops->set_mctrl(uport, 0)). * the DTR drop would be looped back in the CPU to be a DCD drop. * the DCD drop would look to the serial driver as a hangup * the hangup would call uart_shutdown() * ... suspend / resume happens ... * uart_resume_port() would be called and run the code in the (port->flags & ASYNC_SUSPENDED) block, which would startup the port (and enable tx again). * Since the UART would be available for tx, we'd immediately get an interrupt, eventually calling transmit_chars() * The transmit_chars() function would crash. The first crash would be a dereference of a NULL tty member, but since the port has been shutdown that was just a symptom. I have proposed a patch that would fix the Tegra CPUs here (see https://lkml.org/lkml/2011/10/11/444 - tty/serial: Prevent drop of DCD on suspend for Tegra UARTs). However, even with that fix it is still possible for systems that have an externally visible DCD line to see a crash if the DCD drops at just the right time during suspend: thus this patch is still useful. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-19tty/serial: atmel_serial: bootconsole removed from auto-enumeratesNicolas Ferre
Auto-enumerate mechanism conflicts with bootconsoles: remove the usage counter for this type of consoles. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-19Revert "TTY: call tty_driver_lookup_tty unconditionally"Greg Kroah-Hartman
This reverts commit 631180aca723cb92e128fdac5fd144e913ca84e5. It caused problems when /dev/tty is a pty: https://lkml.org/lkml/2011/10/12/401 Cc: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: add device tree supportNicolas Ferre
Will use aliases to enumerate ports, if available. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: auto-enumerate portsNicolas Ferre
If no platform data provided to enumerate ports, use a bit field to choose port number and check if port is already initialized. Use this mechanism for both console and plain serial ports. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: whitespace and braces modificationsNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty/serial: atmel_serial: change platform_data variable nameNicolas Ferre
Easier to follow if platform_data name is pdata. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: call tty_driver_lookup_tty unconditionallyJiri Slaby
Commit 4a2b5fddd5 (Move tty lookup/reopen to caller) made the call to tty_driver_lookup_tty conditional in tty_open. It doesn't look like it was an intention. Or if it was, it was not documented in the changelog and the code now looks weird. For example there would be no need to remember the tty driver and tty index. Further the condition depends on a tty which we drop a reference of already. If I'm looking correctly, this should not matter thanks to the locking currently done there. Thus, tty_driver->ttys[idx] cannot change under our hands. But anyway, it makes sense to change that to the old behaviour. Introduced-in: v2.6.28-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: pty, release tty in all ptmx_open fail pathsJiri Slaby
Mistakenly, commit 64ba3dc3143d (tty: never hold BTM while getting tty_mutex) switched one fail path in ptmx_open to not free the newly allocated tty. Fix that by jumping to the appropriate place. And rename the labels so that it's clear what is going on there. Introduced-in: v2.6.36-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: make tty_add_file non-failingJiri Slaby
If tty_add_file fails at the point it is now, we have to revert all the changes we did to the tty. It means either decrease all refcounts if this was a tty reopen or delete the tty if it was newly allocated. There was a try to fix this in v3.0-rc2 using tty_release in 0259894c7 (TTY: fix fail path in tty_open). But instead it introduced a NULL dereference. It's because tty_release dereferences filp->private_data, but that one is set even in our tty_add_file. And when tty_add_file fails, it's still NULL/garbage. Hence tty_release cannot be called there. To circumvent the original leak (and the current NULL deref) we split tty_add_file into two functions, making the latter non-failing. In that case we may do the former early in open, where handling failures is easy. The latter stays as it is now. So there is no change in functionality. The original bug (leak) was introduced by f573bd176 (tty: Remove __GFP_NOFAIL from tty_add_file()). Thanks Dan for reporting this. Later, we may split tty_release into more functions and call only some of them in this fail path instead. (If at all possible.) Introduced-in: v2.6.37-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18TTY: drop driver reference in tty_open fail pathJiri Slaby
When tty_driver_lookup_tty fails in tty_open, we forget to drop a reference to the tty driver. This was added by commit 4a2b5fddd5 (Move tty lookup/reopen to caller). Fix that by adding tty_driver_kref_put to the fail path. I will refactor the code later. This is for the ease of backporting to stable. Introduced-in: v2.6.28-rc2 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-188250_pci: Fix kernel panic when pch_uart is disabledTomoya MORINAGA
Currently, ".setup" function is not set. As a result, when detecting our IOH's uart device without pch_uart, kernel panic occurs at the following of pciserial_init_ports(). for (i = 0; i < nr_ports; i++) { if (quirk->setup(priv, board, &serial_port, i)) break; So, this patch adds the ".setup" function. We can use pci_default_setup because our IOH's uart is compatible with 16550. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18tty: Support compat_ioctl get/set termios_lockedThomas Meyer
When running a Fedora 15 (x86) on an x86_64 kernel, in the boot process plymouthd complains about those two missing ioctls: [ 2.581783] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005457){t:'T';sz:0} arg(ffb6a5d0) on /dev/tty1 [ 2.581803] ioctl32(plymouthd:186): Unknown cmd fd(10) cmd(00005456){t:'T';sz:0} arg(ffb6a680) on /dev/tty1 both ioctl functions work on the 'struct termios' resp. 'struct termios2', which has the same size (36 bytes resp. 44 bytes) on x86 and x86_64, so it's just a matter of converting the pointer from userland. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18hvc_console: display printk messages on console.Miche Baker-Harvey
printk only works for "registered consoles." Currently, the hvc_console code calls register_console() from hvc_instantiate(), but that's only used in the early console case. In hvc_alloc(), register_console() was not called. Add a call to register_console() in hvc_alloc(), set up the index in the hvc_console, and set up the necessary vtermnos[] and cons_op[] entries so that printk functions work. Signed-off-by: Miche Baker-Harvey <miche@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>