summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/ux500.c
AgeCommit message (Collapse)Author
2016-02-03usb: musb: ux500: Fix NULL pointer dereference at system PMUlf Hansson
The commit 7d32cdef5356 ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef5356 ("usb: musb: fail with error when no DMA...") Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2015-09-14usb: musb: ux500: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-27usb: musb: ux500: fix build warningsFelipe Balbi
This patch fixes the following build warnings: drivers/usb/musb/ux500.c:346:12: warning: ‘ux500_suspend’ defined but not used [-Wunused-function] drivers/usb/musb/ux500.c:357:12: warning: ‘ux500_resume’ defined but not used [-Wunused-function] Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: musb: Set up function pointers for DMATony Lindgren
Set up function pointers for DMA so get closer to being able to build in all the DMA engines. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-05-07usb: musb: Fix up DMA related macrosTony Lindgren
Pass struct musb to tusb_dma_omap() and is_cppi_enabled(), and add macros for the other DMA controllers. Populate the platform specific quirks with the DMA type and use it during runtime. Note that platform glue layers with no custom DMA code are tagged with MUSB_DMA_INVENTRA which may have a chance of working. Looks like the defconfigs for these use PIO_ONLY, so this should not break existing configs. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25usb: musb: Pass fifo_mode in platform dataTony Lindgren
This allows setting the correct fifo_mode when multiple MUSB glue layers are built-in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-25usb: musb: Change end point selection to use new IO accessTony Lindgren
This allows the endpoints to work when multiple MUSB glue layers are built in. Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: move the OTG state from the USB PHY to the OTG structureAntoine Tenart
Before using the PHY framework instead of the USB PHY one, we need to move the OTG state into another place, since it won't be available when USB PHY isn't used. This patch moves the OTG state into the OTG structure, and makes all the needed modifications in the drivers using the OTG state. [ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c, phy-isp1301-omap, and chipidea's debug.c ] Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03usb: musb: ux500: delete unnecessary 'out of memory' messagesPeter Chen
The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-21Merge tag 'usb-for-v3.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.17 merge window Surprisingly enough, while a big set of patches, the majority is composed of cleanups (using devm_*, fixing sparse errors, moving code around, adding const, etc). The highlights are addition of new support for PLX USB338x devices, and support for USB 2.0-only configurations of the DWC3 IP core. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-06-30usb: musb: ux500: use devm_ functionsHimangi Saraogi
This patch introduces the use of managed interfaces for clk_get and kzalloc and removes the corresponding free function calls in the probe and remove functions. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19usb: musb: ux500: don't propagate the OF nodeLinus Walleij
There is a regression in the upcoming v3.16-rc1, that is caused by a problem that has been around for a while but now finally hangs the system. The bootcrawl looks like this: pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) status -22 pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik musb-hdrc musb-hdrc.0.auto: Error applying setting, reverse things back HS USB OTG: no transceiver configured musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral (...) The ux500 MUSB driver propagates the OF node to the dynamically created musb-hdrc device, which is incorrect as it makes the OF core believe there are two devices spun from the very same DT node, which confuses other parts of the device core, notably the pin control subsystem, which will try to apply all the pin control settings also to the HDRC device as it gets instantiated. (The OMAP2430 for example, does not set the of_node member.) Cc: <stable@vger.kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-01-08usb: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-11Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Most of this branch consists of updates, additions and general churn of the device tree source files in the kernel (arch/arm/boot/dts). Besides that, there are a few things to point out: - Lots of platform conversion on OMAP2+, with removal of old board files for various platforms. - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as well - Some updates to pinctrl and other subsystems. Most of these are for DT-enablement of the various platforms and acks have been collected" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits) ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx) ARM: dts: bcm281xx: Add card detect GPIO ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt) ARM: bcm281xx: Add device node for the GPIO controller ARM: mvebu: Add Netgear ReadyNAS 104 board ARM: tegra: fix Tegra114 IOMMU register address ARM: kirkwood: add support for OpenBlocks A7 platform ARM: dts: omap4-panda: add DPI pinmuxing ARM: dts: AM33xx: Add RNG node ARM: dts: AM33XX: Add hwspinlock node ARM: dts: OMAP5: Add hwspinlock node ARM: dts: OMAP4: Add hwspinlock node ARM: dts: use 'status' property for PCIe nodes ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts ARM: mvebu: Add the core-divider clock to Armada 370/XP ...
2013-10-02usb: musb: ux500: use SIMPLE_DEV_PM_OPSDaniel Mack
This removes the DEV_PM_OPS macro and brings this file in line with the other musb platform drivers. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-26usb: musb: ux500: Don't supply a con_id when requesting the clockLee Jones
If we supply a con_id then the clock framework will search for that name in MUSB's Device Tree node for the 'clock-names' property. If it's absent the clock request will fail. However, if we don't supply the con_id then clk_get() will call into clk_sys() which will use the device name to search for the appropriate clock, which is much more natural than forcing 'usb'. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-30usb: musb: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-06-04usb: musb: ux500: add device tree probing supportLee Jones
This patch will allow ux500-musb to be probed and configured solely from configuration found in Device Tree. Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-usb@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04usb: musb: ux500: take the dma_mask from coherent_dma_maskLee Jones
The dma_mask will always be the same as the coherent_dma_mask, so let's cut down on the platform_data burden and set it as such in the driver. This also saves us from supporting it separately when we come to enable this driver for Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04usb: musb: ux500: move the MUSB HDRC configuration into the driverLee Jones
The MUSB HDRC configuration never changes between each of the ux500 supported platforms, so there's little point passing it though platform data. If we set it in the driver instead, we can make good use of it when booting with either ATAGs or Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-28usb: musb: fix incorrect usage of resource pointerFelipe Balbi
We can't simply pass the resource pointer from our device down to our children, otherwise module reinsertion will not work as the resource will continue to be marked as busy. Fix it by building a proper struct resource for our child musb device. Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03usb: phy: ab8500-usb: fix last notifier argumentsFabio Baltieri
Fix last ab->phy.notifier call to use vbus_draw as notifier argument, as that's used in ab8500_charger to control charging current. Also drop a related TODO comment, and the additional ux500_musb_set_vbus(musb, 0), as with this patch it was causing an erratic behaviour of gadget ep0 state machine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: phy: ab8500-usb: update irq handling codeFabio Baltieri
Update irq handling code to notify all possible link status changes of AB8500 and AB8505 to the ux500-musb glue driver. The additional event codes will be used for pm-runtime implementation, and are defined in a separate ux500-specific header. This also modify the irq registration code to use devm_* helpers and drop all non necessary fail path code. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: ux500: add otg notifier supportFabio Baltieri
Add transceiver notifier event handling to the ux500 driver to set vbus on specific transceiver events. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> [ balbi@ti.com: fix build error due to missing otg_state_string() ] Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: ux500: implement musb_set_vbusFabio Baltieri
Add ux500_musb_set_vbus() implementation for ux500. This is based on the version originally developed inside ST-Ericsson. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> [ balbi@ti.com: fix a build error due to missing otg_state_string() ] Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: fix dependency on transceiver driverMing Lei
This patch let glue driver return -EPROBE_DEFER if the transceiver is not readly, so we can support defer probe on musb to fix the below error on 3.7-rc5 if transceiver drivers are built as module: [ 19.052490] unable to find transceiver of type USB2 PHY [ 19.072052] HS USB OTG: no transceiver configured [ 19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19 [ 19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19 [ 19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430' [ 19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430 [ 19.174407] bus: 'platform': add driver twl4030_usb [ 19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb [ 19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb [ 19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3 [ 19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready [ 19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb' [ 19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: <stable@vger.kernel.org> v3.8 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepareFabio Baltieri
This patch converts the module to use clk_prepare_enable and clk_disable_unprepare variants as required by common clock framework. Without this the system crash during probe function. Cc: <stable@vger.kernel.org> # v3.7 v3.8 Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-21usb: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-06usb: musb: remove generic_interruptPhilippe De Swert
This patch is based on the discussion of a previous patch to fix an issue where the omap2430 musb driver is not working for N9/N950. Moving all the interrupt handling to the devices. Avoids inclusion of generic interrupt and breakage due to sometimes misleading CONFIG options. This makes sure usb always works if on of the subdrivers is chosen. Tested on Nokia N9/N950. Partially clean up CONFIG_SOC_OMAP3430 which is not necessary in the cases where I removed it. Also helps with the removal work of those options that Tony Lindgren predicted would happen at some point. Signed-off-by: Philippe De Swert <philippe.deswert@jollamobile.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-01usb: musb: remove hand-crafted id handlingSebastian Andrzej Siewior
This replaced the handcrafted id handling by the PLATFORM_DEVID_AUTO value which should do the same thing. This patch probably also fixes ux500 because I did not find the "musbid" variable to remove. And we close a tiny-unlikely race window becuase the old code gave the id back before device was destroyed in the remove case. [ balbi@ti.com : fixed up two failed hunks when applying patch ] Cc: B, Ravi <ravibabu@ti.com> Cc: Santhapuri, Damodar <damodar.santhapuri@ti.com> Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Cc: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-26usb: musb: ux500: use platform_device_unregister in ux500_remove()Wei Yongjun
platform_device_unregister() only calls platform_device_del() and platform_device_put(), thus use platform_device_unregister() to simplify the code. Also the documents in platform.c shows that platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15usb: musb: ux500: use module_platform_driver macroSrinivas Kandagatla
This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: musb: add musb_ida for multi instance supportB, Ravi
Added musb_ida in musb_core.c to manage the multi core ids. Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-07-02usb: phy: fix return value check of usb_get_phyKishon Vijay Abraham I
usb_get_phy will return -ENODEV if it's not able to find the phy. Hence fixed all the callers of usb_get_phy to check for this error condition instead of relying on a non-zero value as success condition. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25usb: otg: support for multiple transceivers by a single controllerKishon Vijay Abraham I
Add a linked list for keeping multiple PHY instances with different types so that we can have separate USB2 and USB3 PHYs on one single board. _get_phy_ has been changed so that the controller gets the transceiver by type. _remove_phy_ has been added to let the phy be removed from the phy list. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25usb: otg: utils: rename function name in OTG utilsKishon Vijay Abraham I
_transceiver() in otg.c is replaced with _phy. usb_set_transceiver is replaced with usb_add_phy to make it similar to other usb standard function names like usb_add_hcd. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-01Merge tag 'xceiv-for-v3.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: transceiver changes for 3.4 Here we have a big rework done by Heikki Krogerus (thanks) which splits OTG functionality away from transceivers. We have known for quite a long time that struct otg_transceiver was a bad name for the structure, considering transceiver is far from being OTG-specific (see 4e67185).
2012-02-27usb: Convert all users to new usb_phyHeikki Krogerus
Use the new usb_phy_* functions with transceiver operations instead of the old otg functions. Includes fixes from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-31usb: musb: make modules behave betterFelipe Balbi
There's really no point in doing all that initcall trickery when we can safely let udev handle module probing for us. Remove all of that trickery, by moving everybody to module_init() and making proper use of platform_device_register() rather than platform_device_probe(). Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Tested-by: Tasslehoff Kjappfot <tasskjapp@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: ux500: copy dma mask from platform device to musb deviceMian Yousaf Kaukab
musb code checks dma mask before calling dma hooks. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add support for ux500 platformMian Yousaf Kaukab
Initial support for u8500 and u5500 platform. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>