summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
AgeCommit message (Collapse)Author
2011-10-28Merge branch 'devel-stable' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-25Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits) usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push() usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB. USB: gadget: midi: memory leak in f_midi_bind_config() USB: gadget: midi: fix range check in f_midi_out_open() QE/FHCI: fixed the CONTROL bug usb: renesas_usbhs: tidyup for smatch warnings USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms EHCI: workaround for MosChip controller bug usb: gadget: file_storage: fix race on unloading USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board USB: Fix runtime wakeup on OHCI xHCI/USB: Make xHCI driver have a BOS descriptor. usb: gadget: add new usb gadget for ACM and mass storage ...
2011-10-18Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-09-26musb_debugfs.c: remove unneeded includes on ARMNicolas Pitre
Nothing actually requires that <mach/hardware.h>, <mach/memory.h> nor <asm/mach-types.h> be included here. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com>
2011-09-18Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-nextGreg Kroah-Hartman
* 'for-next' of git://gitorious.org/usb/usb: (47 commits) usb: musb: Enable DMA mode1 RX for transfers without short packets usb: musb: fix build breakage usb: gadget: audio: queue wLength-sized requests usb: gadget: audio: actually support both speeds usb: gadget: storage: make FSG_NUM_BUFFERS variable size USB: gadget: storage: remove alignment assumption usb: gadget: storage: adapt logic block size to bound block devices usb: dwc3: gadget: improve debug on link state change usb: dwc3: omap: set idle and standby modes usb: dwc3: ep0: introduce ep0_expect_in flag usb: dwc3: ep0: giveback requests on stall_and_restart usb: dwc3: gadget: drop the useless dma_sync_single* calls usb: dwc3: gadget: fix GCTL programming usb: dwc3: define ScaleDown macro helper usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN usb: dwc3: gadget: do not map/unmap ZLP transfers usb: dwc3: omap: fix IRQ handling usb: dwc3: omap: change IRQ name to dwc3-omap usb: dwc3: add module.h to dwc3-omap.c and core.c usb: dwc3: omap: distinguish between SW and HW modes ...
2011-09-18USB: irq: Remove IRQF_DISABLEDYong Zhang
This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-15Merge branch 'master' into for-nextJiri Kosina
Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
2011-09-15treewide: typo 'interrrupt' word corrections.Vitaliy Ivanov
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-09musb_gadget: Fix for spurious interrupts on endpoint zero.Hans Petter Selasky
There is a multi-year old bug in the MUSB hardware which is not documented. It causes spurious interrupts and have various symptoms, like endless "SetupEnd came in a wrong ep0stage" messages. The fix is taken from the FreeBSD's musb driver. How to reproduce: For example issue clear-stall on a couple of endpoints very fast, like one request per 125us. After a while the bug triggers and the musb-chip becomes unusable until next re-enumeration. Signed-off-by: Hans Petter Selasky <hps@bitfrost.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09usb: musb: Enable DMA mode1 RX for transfers without short packetsAnand Gadiyar
This patch enables DMA mode1 for the RX path when we know there won't be any short packets. We check that by looking into the short_no_ok flag, if it's true we enable mode1, otherwise we use mode0 to transfer the data. This will result in a throughput performance gain of around 40% for USB mass-storage/mtp use cases. [ balbi@ti.com : updated commit log and code comments slightly ] Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Tested-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-29Merge 3.1-rc4 into usb-nextGreg Kroah-Hartman
This was done to resolve a conflict in this file: drivers/usb/host/xhci-ring.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23USB: use usb_endpoint_maxp() instead of le16_to_cpu()Kuninori Morimoto
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-12usb: musb: gadget: fix error pathSebastian Andrzej Siewior
In case one "forgot" to load the receiver i.e. doing |modprobe omap2430 |modprobe musb_hdrc he ends up with: |musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) |HS USB OTG: no transceiver configured |musb-hdrc musb-hdrc: musb_init_controller failed with status -19 |(NULL device *): gadget not registered. |Unable to handle kernel NULL pointer dereference at virtual address 0000001c |Internal error: Oops: 17 [#1] SMP |[<c011383c>] (sysfs_find_dirent+0x4/0x60) from [<c01138c0>] (sysfs_get_dirent+0x28/0x78) |[<c01138c0>] (sysfs_get_dirent+0x28/0x78) from [<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) |[<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) from [<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) |[<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) from [<c01742f8>] (device_del+0x40/0x1b4) |[<c01742f8>] (device_del+0x40/0x1b4) from [<c0174478>] (device_unregister+0xc/0x18) |[<c0174478>] (device_unregister+0xc/0x18) from [<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) |[<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) from [<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) |[<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) from [<c01779c4>] (platform_drv_probe+0x1c/0x24) The problem is that musb_free() tries to figure out what was initializued and what wasn't and clean up only the initialized part. This works well for usb_del_gadget_udc() but device_unregister() can't deal with it. Therefore we rely on the fact the we always have a parent device and only then remove the device. I broke this in 0f91349 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: blackfin: include prefetch head fileBob Liu
After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/blackfin.c: In function 'musb_write_fifo': drivers/usb/musb/blackfin.c:43: error: implicit declaration of function 'prefetch' Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010: fix compilationFelipe Balbi
earlier commits have broken compilation of tusb6010 glue layer, fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: cppi: fix build errors due to DBG and missing musb variablePer Forlin
Replace DBG with dev_dbg and fix invalid access of musb->controller. With this patch cppi_dma builds successfully. Cc: <stable@kernel.org> Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: replace missing DBG with dev_dbgPer Forlin
ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Cc: stable@vger.kernel.org Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: set dma config for both src and dstPer Forlin
The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix oops on musb_gadget_pullupJohn Stultz
an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclaredSergei Trofimovich
CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-08ARM: gpio: davinci: convert drivers to use asm/gpio.h rather than mach/gpio.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-01usb: musb: fix oops on musb_gadget_pullupJohn Stultz
an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclaredSergei Trofimovich
CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-26Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-08usb: musb: restore INDEX register in resume pathAjay Kumar Gupta
Restoring the missing INDEX register value in musb_restore_context(). Without this suspend resume functionality is broken with offmode enabled. Cc: stable@kernel.org Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-01usb: musb: no need to access platform_deviceFelipe Balbi
dev_get_drvdata() is exactly the same as platform_get_drvdata(). Drop that useless access to the platform device. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: convert musb to new style bindSebastian Andrzej Siewior
udc-core checks for valid callbacks so there is no need for the driver to do so. Also "can-be-bound-once" is verified by udc-core. The pull-up callback is called by udc-core afterwords. [ balbi@ti.com : keep holding gadget_driver pointer for now remove the stupid check for gadget_driver otherwise we don't handle IRQs ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: choose correct fifo_modeFelipe Balbi
When we start building glue layers as modules, we need to be careful with the fifo_mode changes otherwise that weird ifdeferry won't evaluate correctly. Add the missing _MODULE variants for all glue layers to prevent everybody from using fifo_mode 2. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: drop a gigantic amount of ifdeferryFelipe Balbi
the MUSB IP is always OTG, so there's no point in adding so many ifdefs on the code. Drop those and always compile the driver for OTG support. This also allows us to drop the useless "driver mode" choice. For doing that, we need to make musb depend on both Host and Peripheral side. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: be careful when using different fifo_modesFelipe Balbi
if we have more endpoints configured than enabled on fifo_mode, then we need to be careful on save/restore context operations, otherwise we will try to access uninitialized __iomem pointer. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01usb: musb: update musb_platform_ops docs to match codeMike Frysinger
The "channel_program" member was renamed to "adjust_channel_params", but the documentation wasn't updated. Reported-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28usb: gadget: convert all users to the new udc infrastructureSebastian Andrzej Siewior
peripheral drivers are using usb_add_gadget()/usb_del_gadget() to register/unregister to the udc-core. The udc-core will take the first available gadget driver and attach function driver which is calling usb_gadget_register_driver(). This is the same behaviour we have right now. Only dummy_hcd was tested, the others were compiled tested. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Li Yang <leoli@freescale.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Roy Huang <roy.huang@analog.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com> Cc: cxie4 <cxie4@marvell.com> Cc: linux-geode@lists.infradead.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-24treewide: transciever/transceiver spelling fixesJoe Perches
Just tyops. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-09usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFOYauheni Kaliuta
Fixes mis-use of MUSB's hardware feature where it won't flush FIFOs when TXPKTRDY flag was set before and we are flushing setting both FLUSHFIFO and TXPKTRDY. In other words, we need to ensure that when we try to flush FIFOs, we don't accidentaly set TXPKTRDY bit too due to a read-back of the register. The MUSB Programming Guide says "May be set simultaneously with TxPktRdy to abort the packet that is currently being loaded into the FIFO". This is a situation where TXPKTRDY hasn't been set yet, but some data already loaded into the fifo. It looks, that if TXPKTRDY has been set before, and there is no loading in progress, but we set FLUSHFIFO with the TXPKTRDY, controller tries to use the same logic to abort loading and as the result just does nothing (because there is no packet been loaded currently) Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> [ balbi@ti.com : fixed one whitespace git complained about improved the commit log slightly ] Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-09usb: musb: host: compare status for negative error valuesMárton Németh
Variable d is a struct usb_iso_packet_descriptor. The status filed is usually negative when an error happens. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-06musb: fix prefetch build failureMike Frysinger
After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18usb: musb: ux500: add configuration and build options for ux500 dmaMian Yousaf Kaukab
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18usb: musb: ux500: add dma glue layer for ux500Mian Yousaf Kaukab
Unaligned sizes and buffers are not supported and they will be filtered out by is_compatible(). Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18usb: musb: ux500: add dma name for ux500Mian Yousaf Kaukab
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18usb: musb: ux500: add ux500 specific code for gadget sideMian Yousaf Kaukab
Although U8500 and U5500 platforms use paltform dma, Inventra dma specific code can work for them for the most part. Only difference is for the Rx path where this patch is making use of request->short_not_ok to select dma mode. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-18usb: musb: fix compile errorFelipe Balbi
commit 35a83365da6aa10095c6138cc428c15853409c32 (usb: musb: drop unneeded musb_debug trickery) introduced a compile error for blackfin and tusb6010 glue layers. Fix it. Reported-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: Calling VBUS pulsing API when SRP is initiated.Hema HK
Call VBUS pulsing API when there is SRP initiation from user space. Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: host: remove duplicate check in musb_ep_program()Sergei Shtylyov
musb_ep_program() contains obviously duplicate check for 'dma_channel' in its IN/receive path -- removing it allows to save one level of indentation. While at it, improve the comment style... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: export musb_interrupt symbolFelipe Balbi
currently that's used by another module (am35x) which, granted, it shouldn't be using that, but in order to avoid compile errors, let's export that symbol temporarily until re-factoring work is done on that driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: allow musb and glue layers to be modulesFelipe Balbi
This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: drop unneeded musb_debug trickeryFelipe Balbi
We have a generic way of enabling/disabling different debug messages on a driver called DYNAMIC_PRINTK. Anyone interested in enabling just part of the debug messages, please read the documentation under: Documentation/dynamic-debug-howto.txt for information on how to use that great infrastructure. Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v0.10.2 at 2024-07-16 11:49:52 (GMT)