summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2010-02-16USB: gadget: fix EEM gadget CRC usageBrian Niebuhr
eem_wrap() is sending a sentinel CRC, but it didn't indicate that to the host, it should zero bit 14 (bmCRC) in the EEM packet header, instead of setting it. Also remove a redundant crc calculation in eem_unwrap(). Signed-off-by: Steve Longerbeam <stevel@netspectrum.com> Acked-by: Brian Niebuhr <bniebuhr@efjohnson.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI optionValentin Longchamp
With CONFIG_USB_ULPI=y, CONFIG_USB<=m, CONFIG_PCI=n and CONFIG_USB_OTG_UTILS=n, which is the default used for mx31moboard, the build for all mx3 platforms fails because drivers/usb/otg/ulpi.c where otg_ulpi_create is defined is not compiled. Build error: arch/arm/mach-mx3/built-in.o: In function `mxc_board_init': kzmarm11.c:(.init.text+0x73c): undefined reference to `otg_ulpi_create' kzmarm11.c:(.init.text+0x1020): undefined reference to `otg_ulpi_create' This isn't a strong dependency as drivers/usb/otg/ulpi.c doesn't use functions defined in drivers/usb/otg/otg.o and is only needed to get ulpi.o linked into the kernel image. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usageMichal Nazarewicz
g_multi used CONFIG_USB_ETH_RNDIS to check if RNDIS option was requested where it should check for CONFIG_USB_G_MULTI_RNDIS. As a result, RNDIS was never present in g_multi regardless of configuration. This fixes changes made in commit 396cda90d228d0851f3d64c7c85a1ecf6b8ae1e8. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: FHCI: Fix build after kfifo reworkAnton Vorontsov
After kfifo rework FHCI fails to build: CC drivers/usb/host/fhci-tds.o drivers/usb/host/fhci-tds.c: In function 'fhci_ep0_free': drivers/usb/host/fhci-tds.c:108: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:118: error: used struct type value where scalar is required drivers/usb/host/fhci-tds.c:128: error: used struct type value where scalar is required This is because kfifos are no longer pointers in the ep struct. So, instead of checking the pointers, we should now check if kfifo is initialized. Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: serial: add usbid for dell wwan card to sierra.cRichard Farina
This patch adds support for Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port. I stole the name from lsusb, but my card does not have a GPS on it (at least not that I can make function). I'm sure the patch is whitespace damaged but the one line addition should be fairly straightforward nonetheless. Tested-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Rick Farina <sidhayn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUSTanaka Akira
This patch adds the USB product ID of KAIREN's USB VGA Adaptor, USB20SVGA-MB-PLUS, to sisusbvga work with it. Signed-off-by: Tanaka Akira <akr@fsij.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: ehci: phy low power mode bug fixingAlek Du
1. There are two msleep calls inside two spin lock sections, need to unlock and lock again after msleep. 2. Save a extra status reg setting. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: s3c-hsotg: Export usb_gadget_register_driver()Mark Brown
USB gadget controller drivers normally export their driver registration function, allowing modular builds of the individual gadget drivers so do so for s3c-hsotg, fixing builds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()Mark Brown
The build of r8a66597-udc was failing on ARM since IS_ERR() and PTR_ERR() weren't protyped. Presumably err.h is being pulled in by another header on other platforms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)Andreas Mohr
- add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT - add hopefully helpful new_id comment - remove less helpful "Due to many user requests for multiple ELV devices we enable them by default." comment (we simply add _all_ known devices - an enduser shouldn't have to fiddle with obscure module parameters...). - add myself to DRIVER_AUTHOR The missing NXTCam ID has been found at http://www.unixboard.de/vb3/showthread.php?t=44155 , ELV devices taken from ELV Windows .inf file. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: storage: Remove unneeded SC/PR from unusual_devs.hPhil Dibowitz
This patch removes the subclass and protocol entries from a Microtech entry in unusual_devs.h. This was reported by <ryck@pacbell.net>. Greg, please apply. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: ftdi_sio: new device id for papouch AD4USBRadek Liboska
added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4USB communicates via USB. Powered is also via USB. datasheet in english is here: http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf Signed-off-by: Radek Liboska <liboska@uochb.cas.cz>
2010-02-16USB: usbfs: properly clean up the as structure on error pathsLinus Torvalds
I notice that the processcompl_compat() function seems to be leaking the 'struct async *as' in the error paths. I think that the calling convention is fundamentally buggered. The caller is the one that did the "reap_as()" to get the as thing, the caller should be the one to free it too. Freeing it in the caller also means that it very clearly always gets freed, and avoids the need for any "free in the error case too". From: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marcus Meissner <meissner@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-16USB: usbfs: only copy the actual data receivedGreg KH
We need to only copy the data received by the device to userspace, not the whole kernel buffer, which can contain "stale" data. Thanks to Marcus Meissner for pointing this out and testing the fix. Reported-by: Marcus Meissner <meissner@suse.de> Tested-by: Marcus Meissner <meissner@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-05usb: r8a66597-hcd: Fix up spinlock recursion in root hub polling.Paul Mundt
The current root hub polling code exhibits a spinlock recursion on the private controller lock. r8a66597_root_hub_control() is called from r8a66597_timer() which grabs the lock and disables IRQs. The following chain emerges: r8a66597_timer() <-- lock taken r8a66597_root_hub_control() r8a66597_check_syssts() usb_hcd_poll_rh_status() <-- acquires the same lock /* insert death here */ The entire chain requires IRQs to be disabled, so we just unlock and relock around the call to usb_hcd_poll_rh_status() while leaving the IRQ state unchanged. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2010-02-05usb: r8a66597-hcd: Flush the D-cache for the pipe-in transfer buffers.Paul Mundt
This implements the same D-cache flushing logic for r8a66597-hcd as Catalin's isp1760 (http://patchwork.kernel.org/patch/76391/) change, with the same note applying here as well: When the HDC driver writes the data to the transfer buffers it pollutes the D-cache (unlike DMA drivers where the device writes the data). If the corresponding pages get mapped into user space, there are no additional cache flushing operations performed and this causes random user space faults on architectures with separate I and D caches (Harvard) or those with aliasing D-cache. This fixes up crashes during USB boot on SH7724 and others: http://marc.info/?l=linux-sh&m=126439837308912&w=2 Reported-by: Goda Yusuke <goda.yusuke@renesas.com> Tested-by: Goda Yusuke <goda.yusuke@renesas.com> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
2010-02-02usb: r8a66597-hdc disable interrupts fixMagnus Damm
This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20USB: isp1362: fix build failure on ARM systems via irq_flags cleanupLothar Wassmann
There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: isp1362: better 64bit printf warning fixesLothar Wassmann
Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf297e58721933. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix usbstorage for 2770:915d delivers no FATRyan May
Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May <rmay31@gmail.com> Cc: Rohan Hart <rohan.hart17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix level of isp1760 Reloading ptd error messageColin Tuckley
This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: FHCI: avoid NULL pointer dereferenceAlexander Beregalov
Assign fhci only if usb is not NULL. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Fix duplicate sysfs problem after device reset.Sarah Sharp
Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add speed values for USB 3.0 and wireless controllersGreg Kroah-Hartman
These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: add missing delay during remote wakeupAlan Stern
This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern
This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: EHCI: fix handling of unusual interrupt intervalsAlan Stern
This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Glynn Farrow <farrowg@sg.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: Don't use GFP_KERNEL while we cannot reset a storage deviceOliver Neukum
Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: fix bitmask merge errorAlan Stern
This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20usb: serial: fix memory leak in generic driverJohan Hovold
Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Greg KH <greg@kroah.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-20USB: serial: fix USB serial fix kfifo_len lockingStefani Seibold
This patch fix a possible race bug in drivers/usb/serial/generic with the new kfifo API. Please apply it to the 2.6.33-rc* tree. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: Fix a bug on appledisplay.c regarding signednesspancho horrillo
brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo <pancho@pancho.name> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: option: support hi speed for modem Haier CE100Donny Kurnia
I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia <donnykurnia@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: free alsa devices when unloadingCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: audio gadget: fix wTotalLength calculationCliff Cai
The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23usb: otg: isp1301_omap: fix compile errorFelipe Balbi
commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in <linux/usb/otg.h> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: workaround Blackfin FIFO anomaliesBryan Wu
Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix array index out of bounds issueMaulik Mankad
This patch fixes the below array index out of bounds issue. Buffer overflow, array index of 'aInfo' may be out of bounds. Array 'aInfo' of size 78 may use index value(s) 6..84 The data stored in 'aInfo' array exceeds the array size of 78. This patch increases the size of this array to hold the string correctly without any memory corruption. This issue was reported by Klockwork tool. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Fix null pointer dereference issueMaulik Mankad
This patch fixes the following NULL pointer dereference issue. Pointer 'request' returned from call to function 'next_request' at line 748 may be NULL and may be dereferenced at line 792. ============ Code Snippet ============ 748: request = next_request(musb_ep); 785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) { csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_P_WZC_BITS | csr); 792: request->actual += musb_ep->dma->actual_len; Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: correct DMA address for txCliff Cai
Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget_ep0: avoid SetupEnd interruptSergei Shtylyov
Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabledSwaminathan S
Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: do not work if no gadget driver is loadedFelipe Balbi
On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: gadget: set otg tranceiver to idle when registering gadgetArnaud Mandy
When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: Populate the VBUS GPIO with the correct GPIO numberSwaminathan S
This fixes a null-pointer dereference bug. Signed-off-by: Swaminathan S <swami.iyer@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: fix compiling warning with min() macroCliff Cai
Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb: move musb_remove to __exitFelipe Balbi
probe() already was on __init, so moving remove() to __exit. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: musb_gadget: fix kernel oops in txstate()Sergei Shtylyov
Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h headerAndreas Mohr
This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-23USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h headerAndreas Mohr
This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>