summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2014-10-20watchdog: meson: remove magic value for rebootCarlo Caione
This patch removes the magic value used for rebooting the board. This value is useless and leads to a static checker warning as reported by Dan Carpenter. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEMChen Gang
They need HAS_IOMEM, so let them depend on it, the related error (with allmodconfig under um): MODPOST 1205 modules ERROR: "devm_ioremap_resource" [drivers/watchdog/tegra_wdt.ko] undefined! ERROR: "devm_ioremap_resource" [drivers/watchdog/of_xilinx_wdt.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: sunxi: Add A31 watchdog supportChen-Yu Tsai
This patch adds support for the watchdog hardware found in A31 and newer SoCs. This new hardware has registers at different offsets, and the system reset control has been split out of the "mode" register into a new "configuration" register. Differences not supported by this driver include separate interrupt lines for each watchdog, instead of sharing an interrupt line and registers with the timer block. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: sunxi: support parameterized compatible stringsChen-Yu Tsai
This patch adds support for hardware parameters tied to compatible strings, so similar hardware can reuse the driver. This will be used to support the newer watchdog found in A31 and later SoCs. Differences in the new hardware include separate interrupt lines for each watchdog, and corresponding interrupt control/status registers. Watchdog control registers were also slightly rearranged. Also replace ioread32()/iowrite32() with readl()/writel() in various places changed. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20watchdog: imx2_wdt: add restart handler supportJingchang Lu
Register the watchdog as the system restart function to the new introducing kernel restart call chain in the driver instead of providing the restart in machine desc. This restart handler function is from the mxc_restart() in arch/arm/mach-imx/system.c Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: qcom: register a restart notifierJosh Cartwright
The WDT's BITE_TIME warm-reset behavior can be leveraged as a last resort mechanism for triggering chip reset. Usually, other restart methods (such as PS_HOLD) are preferrable for issuing a more complete reset of the chip. As such, keep the priority of the watchdog notifier low. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: s3c2410: add restart handlerHeiko Stuebner
On a lot of Samsung systems the watchdog is responsible for restarting the system and until now this code was contained in plat-samsung/watchdog-reset.c. With the introduction of the restart handlers, this code can now move into driver itself, removing the need for arch-specific code. Tested on a S3C2442 based GTA02 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20watchdog: dw_wdt: add restart handler supportJisheng Zhang
The kernel core now provides an API to trigger a system restart. Register with it to support restarting the system via. watchdog. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20ARM: meson: add watchdog driverCarlo Caione
This patch adds the watchdog driver for the Amlogic Meson SoCs used also to reboot the device. Signed-off-by: Carlo Caione <carlo@caione.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20stmp3xxx_rtc_wdt: Add suspend/resume PM supportJanusz Uzycki
There is no conflict with rtc/rtc-stmp3xxx.c parent because modified registers in PM functions of stmp3xxx_rtc_wdt are different. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Add DA9063 PMIC watchdog driver.Krystian Garbaciak
This driver supports the watchdog device inside the DA9063 PMIC. Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: add driver for Ricoh RN5T618 watchdogBeniamino Galvani
This adds a driver for the watchdog timer available in Ricoh RN5T618 PMIC. The device supports a programmable expiration time of 1, 8, 32 or 128 seconds. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7Naveen Krishna Chatradhi
Exynos7 SoC has a Watchdog for Atlas (A57) cores This patch adds support for the Atlas watchdog. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: qcom: add support for KPSS WDTJosh Cartwright
Add a driver for the watchdog timer block found in the Krait Processor Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()Jisheng Zhang
The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register may be zero, so the timeout period may be very short after initialization is done, thus the system may be reset soon after enabling. We fix this problem by also initialising the TOP_INIT when setting TOP in function dw_wdt_set_top(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: Add Cadence WDT driverHarini Katakam
Add Cadence WDT driver. This is used by Xilinx Zynq. Signed-off-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: imx2_wdt: Convert to use regmap framework's endianness method.Xiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: ts72xx_wdt: Kill superfluous variable in removeMika Westerberg
There is no need to store the return value of misc_deregister() in a variable. Instead we can just return the value directly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20powerpc: booke_wdt: Fix build error as a modulePranith Kumar
Building booke_wdt fails when trying to build as a module as there is no early_param() in module. Fix by using module_param() instead of early_param(). Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: xilinx: Remove .owner field for driverMichal Simek
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-10Merge tag 'hwmon-for-linus-v3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for menf21bmc. - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API. - register ntc_thermistor driver with thermal subsystem. - add support for F15h M60h to k10temp driver. - add driver for MEN14F021P00 BMC HWMON driver; this required a merge with tag mfd-hwmon-leds-watchdog-v3.18 * tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ab8500) Call kernel_power_off instead of pm_power_off hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor. hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups MAINTAINERS: add entry for the PWM fan driver hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups hwmon: (k10temp) Add support for F15h M60h hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups hwmon: (ads1015) Use of_property_read_u32 at appropriate places
2014-10-10Merge tag 'restart-handler-for-v3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull restart handler infrastructure from Guenter Roeck: "This series was supposed to be pulled through various trees using it, and I did not plan to send a separate pull request. As it turns out, the pinctrl tree did not merge with it, is now upstream, and uses it, meaning there are now build failures. Please pull this series directly to fix those build failures" * tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: arm/arm64: unexport restart handlers watchdog: sunxi: register restart handler with kernel restart handler watchdog: alim7101: register restart handler with kernel restart handler watchdog: moxart: register restart handler with kernel restart handler arm: support restart through restart handler call chain arm64: support restart through restart handler call chain power/restart: call machine_restart instead of arm_pm_restart kernel: add support for kernel restart handler call chain
2014-09-26watchdog: sunxi: register restart handler with kernel restart handlerGuenter Roeck
The kernel core now provides an API to trigger a system restart. Register with it instead of setting arm_pm_restart. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-26watchdog: alim7101: register restart handler with kernel restart handlerGuenter Roeck
The kernel core now provides an API to trigger a system restart. Register with it to restart the system instead of misusing the reboot notifier. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-26watchdog: moxart: register restart handler with kernel restart handlerGuenter Roeck
The kernel now provides an API to trigger a system restart. Register with it instead of setting arm_pm_restart. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-24watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driverAndreas Werner
Added driver to support the 14F021P00 BMC Watchdog. The BMC is a Board Management Controller including watchdog functionality. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-09watchdog: Remove ARCH_KIRKWOOD dependencyAndrew Lunn
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org Link: https://lkml.kernel.org/r/1409417172-6846-7-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
2014-08-05wdt: sunxi: Move restart code to the watchdog driverMaxime Ripard
Most of the watchdog code is duplicated between the machine restart code and the watchdog driver. Add the restart hook to the watchdog driver, to be able to remove it from the machine code eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: imx2_wdt: adds big endianness support.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: shwdt: Remove the unnecessary check of resource after ↵George Cherian
platform_get_resource() devm_ioremap_resource check for a valid resource. Remove the unnecessary check. Also group platform_get_resource and devm_ioremap_resource together for better readability. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: lantiq_wdt: Remove the un-necessary check of resource after ↵George Cherian
platform_get_resource() devm_ioremap_resource() checks for valid resource. Remove the un-necessary check after platform_get_resource(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()George Cherian
devm_ioremap_resource() checks for valid resource. Remove the un-necessary check after platform_get_resource(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-01MIPS: OCTEON: watchdog: don't jump to bootloader without entry addressAaro Koskinen
If CONFIG_HOTPLUG_CPU is set, the driver thinks bootloader entry address is configured and we should jump there. However, this is not necessarily true if the kernel is booted on a system with older/incompatible bootloader. Add dynamic checks for the bootloader entry address. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-22s390/watchdog: Fix module name in Kconfig help textPhilipp Hachtmann
The help text for DIAG288_WATCHDOG in drivers/watchdog/Kconfig still mentioned the misleading old module name vmwatchdog. This patch changes that to the correct new name diag288_wdt. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-10watchdog: add Intel MID watchdog driver supportDavid Cohen
Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst <eric.ernst@intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()Viresh Kumar
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10booke/watchdog: refine and clean up the codesTang Yuantian
Basically, this patch does the following: 1. Move the codes of parsing boot parameters from setup-common.c to driver. In this way, code reader can know directly that there are boot parameters that can change the timeout. 2. Make boot parameter 'booke_wdt_period' effective. currently, when driver is loaded, default timeout is always being used in stead of booke_wdt_period. 3. Wrap up the watchdog timeout in device struct and clean up unnecessary codes. Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Li Yang <leoli@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: iop_wdt only builds for mach-iop13xxArnd Bergmann
All three iop variants we support in Linux (iop32x, iop33x and iop13xx) seem to have support for the watchdog hardware, but this driver fails to build for the first two of these because it uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for iop13xx. This clarifies the dependency in Kconfig to avoid randconfig build errors. It is unlikely that anyone will ever miss support for this driver on the ancient iop3xx platforms, so we don't need to bother trying to fix it properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-06-10watchdog: Remove drivers for W83697HF and W83697UGGuenter Roeck
Since both chips are now supported by the w83627hf watchdog driver, the chip specific drivers are no longer needed and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: w83627hf_wdt: Add early_disable module parameterGuenter Roeck
Add early_disable module parameter to match functionality previously available in the w83697hf_wdt driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Add Armada 375/380 SoC supportEzequiel Garcia
This commit adds support for the Armada 375 and Armada 380 SoCs. This SoC variant has a second RSTOUT register, in addition to the already existent, which is shared with the system-controller. To handle this RSTOUT, we introduce a new MMIO register 'rstout_mask' to be required on 'armada-{375,380}-watchdog' new compatible string. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC enabled() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different enabled() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC stop() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different stop() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Remove unneeded atomic accessEzequiel Garcia
The RSTOUT register on the Armada 370 SoC variant is a dedicated register (not shared across orthogonal subsystems) and so it's not needed to write it atomically. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce a SoC-specific RSTOUT mappingEzequiel Garcia
Separate the RSTOUT register mapping for the different compatible strings supported by the driver. This allows to use devm_ioremap on SoC variants that share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO region) on SoCs that have a dedicated RSTOUT register. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Move the register ioremap'ing to its own functionEzequiel Garcia
Follow-up patches will extend the registers ioremap and request to handle SoC-specific quirks on the RSTOUT register. Therefore, in order to keep the code readable, this commit introduces a special function for this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: xilinx: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>