summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
2014-08-05wdt: sunxi: Move restart code to the watchdog driverMaxime Ripard
Most of the watchdog code is duplicated between the machine restart code and the watchdog driver. Add the restart hook to the watchdog driver, to be able to remove it from the machine code eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: imx2_wdt: adds big endianness support.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: shwdt: Remove the unnecessary check of resource after ↵George Cherian
platform_get_resource() devm_ioremap_resource check for a valid resource. Remove the unnecessary check. Also group platform_get_resource and devm_ioremap_resource together for better readability. Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: lantiq_wdt: Remove the un-necessary check of resource after ↵George Cherian
platform_get_resource() devm_ioremap_resource() checks for valid resource. Remove the un-necessary check after platform_get_resource(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()George Cherian
devm_ioremap_resource() checks for valid resource. Remove the un-necessary check after platform_get_resource(). Signed-off-by: George Cherian <george.cherian@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-01MIPS: OCTEON: watchdog: don't jump to bootloader without entry addressAaro Koskinen
If CONFIG_HOTPLUG_CPU is set, the driver thinks bootloader entry address is configured and we should jump there. However, this is not necessarily true if the kernel is booted on a system with older/incompatible bootloader. Add dynamic checks for the bootloader entry address. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-22s390/watchdog: Fix module name in Kconfig help textPhilipp Hachtmann
The help text for DIAG288_WATCHDOG in drivers/watchdog/Kconfig still mentioned the misleading old module name vmwatchdog. This patch changes that to the correct new name diag288_wdt. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-10watchdog: add Intel MID watchdog driver supportDavid Cohen
Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst <eric.ernst@intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()Viresh Kumar
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10booke/watchdog: refine and clean up the codesTang Yuantian
Basically, this patch does the following: 1. Move the codes of parsing boot parameters from setup-common.c to driver. In this way, code reader can know directly that there are boot parameters that can change the timeout. 2. Make boot parameter 'booke_wdt_period' effective. currently, when driver is loaded, default timeout is always being used in stead of booke_wdt_period. 3. Wrap up the watchdog timeout in device struct and clean up unnecessary codes. Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Li Yang <leoli@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: iop_wdt only builds for mach-iop13xxArnd Bergmann
All three iop variants we support in Linux (iop32x, iop33x and iop13xx) seem to have support for the watchdog hardware, but this driver fails to build for the first two of these because it uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for iop13xx. This clarifies the dependency in Kconfig to avoid randconfig build errors. It is unlikely that anyone will ever miss support for this driver on the ancient iop3xx platforms, so we don't need to bother trying to fix it properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-06-10watchdog: Remove drivers for W83697HF and W83697UGGuenter Roeck
Since both chips are now supported by the w83627hf watchdog driver, the chip specific drivers are no longer needed and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: w83627hf_wdt: Add early_disable module parameterGuenter Roeck
Add early_disable module parameter to match functionality previously available in the w83697hf_wdt driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Add Armada 375/380 SoC supportEzequiel Garcia
This commit adds support for the Armada 375 and Armada 380 SoCs. This SoC variant has a second RSTOUT register, in addition to the already existent, which is shared with the system-controller. To handle this RSTOUT, we introduce a new MMIO register 'rstout_mask' to be required on 'armada-{375,380}-watchdog' new compatible string. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC enabled() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different enabled() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC stop() functionEzequiel Garcia
In order to support other SoCs, it's needed to have a different stop() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Remove unneeded atomic accessEzequiel Garcia
The RSTOUT register on the Armada 370 SoC variant is a dedicated register (not shared across orthogonal subsystems) and so it's not needed to write it atomically. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce a SoC-specific RSTOUT mappingEzequiel Garcia
Separate the RSTOUT register mapping for the different compatible strings supported by the driver. This allows to use devm_ioremap on SoC variants that share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO region) on SoCs that have a dedicated RSTOUT register. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Move the register ioremap'ing to its own functionEzequiel Garcia
Follow-up patches will extend the registers ioremap and request to handle SoC-specific quirks on the RSTOUT register. Therefore, in order to keep the code readable, this commit introduces a special function for this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: xilinx: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to watchdog core apiAnatolij Gustschin
Convert the imx2_wdt driver to the new watchdog core api. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to use regmap API.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ IMX2+ LE LE Vybird LE LE LS1 LE BE LS2 LE LE Other possible SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ Soc1 BE BE Soc2 BE LE And also the watchdog's registers will be 32-bits for some versions, and though it is 16-bits in IMX2+, Vybird and LS+. Using the regmap APIs, could be more easy to support different endianness and also more easy to support 32-bits version... Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: Sort the header files alphabeticallyXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: ath79_wdt: switch to clk_prepare/clk_disableGabor Juhos
Replace clk_enable() and clk_disable() calls with clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: ath79_wdt: avoid spurious restarts on AR934xGabor Juhos
On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org>
2014-06-10watchdog: shwdt: Remove unused platform_set_drvdata()Alexander Shiyan
This patch removes platform_set_drvdata() which is not used in the driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: kempld-wdt: Use the correct value when configuring the prescaler ↵gundberg
with the watchdog Use the prescaler index, rather than its value, to configure the watchdog. This will prevent a mismatch with the prescaler used to calculate the cycles. Signed-off-by: Per Gundberg <per.gundberg@icomera.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2014-06-10watchdog: sunxi: Fix compilation with C=2Emilio López
When compiling sunxi_defconfig while using C=2, the following error causes the compilation to fail: drivers/watchdog/sunxi_wdt.c:60:15: error: constant 0b0001 is not a valid number Fix it by using hex notation instead of the non-standard binary one Signed-off-by: Emilio Lopez <emilio@elopez.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: via_wdt: replace del_timer by del_timer_syncJulia Lawall
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exits. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier i,t,ex; @@ struct t i = { .remove = ex, }; @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: Fix SBC8360 dependenciesJean Delvare
According to its Kconfig help text, the sbc8360 watchdog driver is only used on the Axiomtek SBC8360 single-board computer. This piece of hardware is 32-bit x86 so the driver is useless beyond X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10s390/watchdog: add support for LPAR operation (diag288)Philipp Hachtmann
Add the LPAR variant of the diag 288 watchdog to the driver. The only available action on timeout for LPAR is a PSW restart. Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/watchdog: use watchdog APIPhilipp Hachtmann
Converted the vmwatchdog driver to use the kernel's watchdog API. Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-02Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
2014-03-31watchdog: Fix Elan SC520 dependenciesJean Delvare
Anyone using a system based on an AMD Elan SC520 processor would be building a dedicated kernel for it, so we can make the sc520_wdt driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ib700wdt: Use platform_driver_probeJean Delvare
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: geodewdt: Use platform_driver_probeJean Delvare
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: advantechwdt: Use platform_driver_probeJean Delvare
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: acquirewdt: Use platform_driver_probeJean Delvare
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: iTCO_wdt: Fix the parent deviceJean Delvare
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich (the PCI device.) Setting the parent right makes it much easier for the user to figure out which driver/module is handling the watchdog device node. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: it87_wdt: Work around non-working CIR interruptsMarc van der Wal
On some hardware platforms, the it87_wdt watchdog resets the machine despite the watchdog daemon running and writing to /dev/watchdog. This is due to Consumer IR buffer underrun interrupts being used as triggers to reset the timer. On some buggy hardware implementations such as the iEi AFL-12A-N270 single-board computer, this method does not work. However, resetting the timer by writing its original timeout value in its configuration register over and over again suppresses the unwanted reboots. Add a module option (nocir), 0 by default in order not to break existing setups. Setting it to 1 enables the workaround. Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>. Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5. Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm281xx: Fix Kconfig dependencyMarkus Mayer
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as dependency for bcm_kona_wdt.c. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Check return value of clk_prepare_enableSachin Kamat
clk_prepare_enable can fail. Check its return value. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Remove unneeded initializationSachin Kamat
Initializing clk to NULL as a reset/error condition does not help as NULL is not an invalid condition w.r.t clk. Remove this initialization altogether as there is no state retention. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sunxi: Change compatiblesMaxime Ripard
The Allwinner A10 and A31 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the watchdog controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>