summaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2016-08-24xenbus: don't look up transaction IDs for ordinary writesJan Beulich
This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition") Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27Merge tag 'for-linus-4.8-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.8-rc0: - ACPI support for guests on ARM platforms. - Generic steal time support for arm and x86. - Support cases where kernel cpu is not Xen VCPU number (e.g., if in-guest kexec is used). - Use the system workqueue instead of a custom workqueue in various places" * tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits) xen: add static initialization of steal_clock op to xen_time_ops xen/pvhvm: run xen_vcpu_setup() for the boot CPU xen/evtchn: use xen_vcpu_id mapping xen/events: fifo: use xen_vcpu_id mapping xen/events: use xen_vcpu_id mapping in events_base x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op xen: introduce xen_vcpu_id mapping x86/acpi: store ACPI ids from MADT for future usage x86/xen: update cpuid.h from Xen-4.7 xen/evtchn: add IOCTL_EVTCHN_RESTRICT xen-blkback: really don't leak mode property xen-blkback: constify instance of "struct attribute_group" xen-blkfront: prefer xenbus_scanf() over xenbus_gather() xen-blkback: prefer xenbus_scanf() over xenbus_gather() xen: support runqueue steal time on xen arm/xen: add support for vm_assist hypercall xen: update xen headers xen-pciback: drop superfluous variables xen-pciback: short-circuit read path used for merging write values ...
2016-07-26mm, frontswap: convert frontswap_enabled to static keyVlastimil Babka
I have noticed that frontswap.h first declares "frontswap_enabled" as extern bool variable, and then overrides it with "#define frontswap_enabled (1)" for CONFIG_FRONTSWAP=Y or (0) when disabled. The bool variable isn't actually instantiated anywhere. This all looks like an unfinished attempt to make frontswap_enabled reflect whether a backend is instantiated. But in the current state, all frontswap hooks call unconditionally into frontswap.c just to check if frontswap_ops is non-NULL. This should at least be checked inline, but we can further eliminate the overhead when CONFIG_FRONTSWAP is enabled and no backend registered, using a static key that is initially disabled, and gets enabled only upon first backend registration. Thus, checks for "frontswap_enabled" are replaced with "frontswap_enabled()" wrapping the static key check. There are two exceptions: - xen's selfballoon_process() was testing frontswap_enabled in code guarded by #ifdef CONFIG_FRONTSWAP, which was effectively always true when reachable. The patch just removes this check. Using frontswap_enabled() does not sound correct here, as this can be true even without xen's own backend being registered. - in SYSCALL_DEFINE2(swapon), change the check to IS_ENABLED(CONFIG_FRONTSWAP) as it seems the bitmap allocation cannot currently be postponed until a backend is registered. This means that frontswap will still have some memory overhead by being configured, but without a backend. After the patch, we can expect that some functions in frontswap.c are called only when frontswap_ops is non-NULL. Change the checks there to VM_BUG_ONs. While at it, convert other BUG_ONs to VM_BUG_ONs as frontswap has been stable for some time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463152235-9717-1-git-send-email-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26xen: add static initialization of steal_clock op to xen_time_opsJuergen Gross
pv_time_ops might be overwritten with xen_time_ops after the steal_clock operation has been initialized already. To prevent calling a now uninitialized function pointer add the steal_clock static initialization to xen_time_ops. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/evtchn: use xen_vcpu_id mappingVitaly Kuznetsov
Use the newly introduced xen_vcpu_id mapping to get Xen's idea of vCPU id for CPU0. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/events: fifo: use xen_vcpu_id mappingVitaly Kuznetsov
EVTCHNOP_init_control has vCPU id as a parameter and Xen's idea of vCPU id should be used. Use the newly introduced xen_vcpu_id mapping to convert it from Linux's id. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/events: use xen_vcpu_id mapping in events_baseVitaly Kuznetsov
EVTCHNOP_bind_ipi and EVTCHNOP_bind_virq pass vCPU id as a parameter and Xen's idea of vCPU id should be used. Use the newly introduced xen_vcpu_id mapping to convert it from Linux's id. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_opVitaly Kuznetsov
HYPERVISOR_vcpu_op() passes Linux's idea of vCPU id as a parameter while Xen's idea is expected. In some cases these ideas diverge so we need to do remapping. Convert all callers of HYPERVISOR_vcpu_op() to use xen_vcpu_nr(). Leave xen_fill_possible_map() and xen_filter_cpu_maps() intact as they're only being called by PV guests before perpu areas are initialized. While the issue could be solved by switching to early_percpu for xen_vcpu_id I think it's not worth it: PV guests will probably never get to the point where their idea of vCPU id diverges from Xen's. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25xen/evtchn: add IOCTL_EVTCHN_RESTRICTDavid Vrabel
IOCTL_EVTCHN_RESTRICT limits the file descriptor to being able to bind to interdomain event channels from a specific domain. Event channels that are already bound continue to work for sending and receiving notifications. This is useful as part of deprivileging a user space PV backend or device model (QEMU). e.g., Once the device model as bound to the ioreq server event channels it can restrict the file handle so an exploited DM cannot use it to create or bind to arbitrary event channels. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2016-07-08xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7Jan Beulich
As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on both Intel and AMD systems. Doing any kind of hardware capability checks in the driver as a prerequisite was wrong anyway: With the hypervisor being in charge, all such checking should be done by it. If ACPI data gets uploaded despite some missing capability, the hypervisor is free to ignore part or all of that data. Ditch the entire check_prereq() function, and do the only valid check (xen_initial_domain()) in the caller in its place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-08xenbus: simplify xenbus_dev_request_and_reply()Jan Beulich
No need to retain a local copy of the full request message, only the type is really needed. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-08xenbus: don't bail early from xenbus_dev_request_and_reply()Jan Beulich
xenbus_dev_request_and_reply() needs to track whether a transaction is open. For XS_TRANSACTION_START messages it calls transaction_start() and for XS_TRANSACTION_END messages it calls transaction_end(). If sending an XS_TRANSACTION_START message fails or responds with an an error, the transaction is not open and transaction_end() must be called. If sending an XS_TRANSACTION_END message fails, the transaction is still open, but if an error response is returned the transaction is closed. Commit 027bd7e89906 ("xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart") introduced a regression where failed XS_TRANSACTION_START messages were leaving the transaction open. This can cause problems with suspend (and migration) as all transactions must be closed before suspending. It appears that the problematic change was added accidentally, so just remove it. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-07xenbus: don't BUG() on user mode induced conditionJan Beulich
Inability to locate a user mode specified transaction ID should not lead to a kernel crash. For other than XS_TRANSACTION_START also don't issue anything to xenbus if the specified ID doesn't match that of any active transaction. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: support runqueue steal time on xenJuergen Gross
Up to now reading the stolen time of a remote cpu was not possible in a performant way under Xen. This made support of runqueue steal time via paravirt_steal_rq_enabled impossible. With the addition of an appropriate hypervisor interface this is now possible, so add the support. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop superfluous variablesJan Beulich
req_start is simply an alias of the "offset" function parameter, and req_end is being used just once in each function. (And both variables were loop invariant anyway, so should at least have got initialized outside the loop.) Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: short-circuit read path used for merging write valuesJan Beulich
There's no point calling xen_pcibk_config_read() here - all it'll do is return whatever conf_space_read() returns for the field which was found here (and which would be found there again). Also there's no point clearing tmp_val before the call. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: use const and unsigned in bar_init()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: simplify determination of 64-bit memory resourceJan Beulich
Other than for raw BAR values, flags are properly separated in the internal representation. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: fold read_dev_bar() into its now single callerJan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop rom_init()Jan Beulich
It is now identical to bar_init(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop unused function parameter of read_dev_bar()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: xenbus: Remove create_workqueueBhaktipriya Shridhar
System workqueues have been able to handle high level of concurrency for a long time now and there's no reason to use dedicated workqueues just to gain concurrency. Replace dedicated xenbus_frontend_wq with the use of system_wq. Unlike a dedicated per-cpu workqueue created with create_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantees unless the target CPU is explicitly specified and the increase of local concurrency shouldn't make any difference. In this case, there is only a single work item, increase of concurrency level by switching to system_wq should not make any difference. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: xen-pciback: Remove create_workqueueBhaktipriya Shridhar
System workqueues have been able to handle high level of concurrency for a long time now and there's no reason to use dedicated workqueues just to gain concurrency. Replace dedicated xen_pcibk_wq with the use of system_wq. Unlike a dedicated per-cpu workqueue created with create_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantees unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Since the work items could be pending, flush_work() has been used in xen_pcibk_disconnect(). xen_pcibk_xenbus_remove() calls free_pdev() which in turn calls xen_pcibk_disconnect() for every pdev to ensure that there is no pending task while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: add steal_clock support on x86Juergen Gross
The pv_time_ops structure contains a function pointer for the "steal_clock" functionality used only by KVM and Xen on ARM. Xen on x86 uses its own mechanism to account for the "stolen" time a thread wasn't able to run due to hypervisor scheduling. Add support in Xen arch independent time handling for this feature by moving it out of the arm arch into drivers/xen and remove the x86 Xen hack. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: use vma_pages().Muhammad Falak R Wani
Replace explicit computation of vma page count by a call to vma_pages(). Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06ARM64: XEN: Add a function to initialize Xen specific UEFI runtime servicesShannon Zhao
When running on Xen hypervisor, runtime services are supported through hypercall. Add a Xen specific function to initialize runtime services. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-06XEN: EFI: Move x86 specific codes to architecture directoryShannon Zhao
Move x86 specific codes to architecture directory and export those EFI runtime service functions. This will be useful for initializing runtime service on ARM later. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-07-06Xen: ARM: Add support for mapping AMBA device mmioShannon Zhao
Add a bus_notifier for AMBA bus device in order to map the device mmio regions when DOM0 booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: ARM: Add support for mapping platform device mmioShannon Zhao
Add a bus_notifier for platform bus device in order to map the device mmio regions when DOM0 booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06Xen: xlate: Use page_to_xen_pfn instead of page_to_pfnShannon Zhao
Make xen_xlate_map_ballooned_pages work with 64K pages. In that case Kernel pages are 64K in size but Xen pages remain 4K in size. Xen pfns refer to 4K pages. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-07-06xen/grant-table: Move xlated_setup_gnttab_pages to common placeShannon Zhao
Move xlated_setup_gnttab_pages to common place, so it can be reused by ARM to setup grant table. Rename it to xen_xlate_map_ballooned_pages. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-06-24xen-pciback: return proper values during BAR sizingJan Beulich
Reads following writes with all address bits set to 1 should return all changeable address bits as one, not the BAR size (nor, as was the case for the upper half of 64-bit BARs, the high half of the region's end address). Presumably this didn't cause any problems so far because consumers use the value to calculate the size (usually via val & -val), and do nothing else with it. But also consider the exception here: Unimplemented BARs should always return all zeroes. And finally, the check for whether to return the sizing address on read for the ROM BAR should ignore all non-address bits, not just the ROM Enable one. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-06-23xen/pciback: Fix conf_space read/write overlap check.Andrey Grodzovsky
Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-06-23xen/balloon: Fix declared-but-not-defined warningRoss Lagerwall
Fix a declared-but-not-defined warning when building with XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by commit dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32 bit PAE"). Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-28Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ...
2016-05-24Merge tag 'for-linus-4.7-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel. * tag 'for-linus-4.7-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: use same main loop for counting and remapping pages xen/events: Don't move disabled irqs xen/x86: actually allocate legacy interrupts on PV guests Xen: don't warn about 2-byte wchar_t in efi xen/gntdev: reduce copy batch size to 16 xen/x86: don't lose event interrupts
2016-05-24xen/events: Don't move disabled irqsRoss Lagerwall
Commit ff1e22e7a638 ("xen/events: Mask a moving irq") open-coded irq_move_irq() but left out checking if the IRQ is disabled. This broke resuming from suspend since it tries to move a (disabled) irq without holding the IRQ's desc->lock. Fix it by adding in a check for disabled IRQs. The resulting stacktrace was: kernel BUG at /build/linux-UbQGH5/linux-4.4.0/kernel/irq/migration.c:31! invalid opcode: 0000 [#1] SMP Modules linked in: xenfs xen_privcmd ... CPU: 0 PID: 9 Comm: migration/0 Not tainted 4.4.0-22-generic #39-Ubuntu Hardware name: Xen HVM domU, BIOS 4.6.1-xs125180 05/04/2016 task: ffff88003d75ee00 ti: ffff88003d7bc000 task.ti: ffff88003d7bc000 RIP: 0010:[<ffffffff810e26e2>] [<ffffffff810e26e2>] irq_move_masked_irq+0xd2/0xe0 RSP: 0018:ffff88003d7bfc50 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88003d40ba00 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000100 RDI: ffff88003d40bad8 RBP: ffff88003d7bfc68 R08: 0000000000000000 R09: ffff88003d000000 R10: 0000000000000000 R11: 000000000000023c R12: ffff88003d40bad0 R13: ffffffff81f3a4a0 R14: 0000000000000010 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88003da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd4264de624 CR3: 0000000037922000 CR4: 00000000003406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff88003d40ba38 0000000000000024 0000000000000000 ffff88003d7bfca0 ffffffff814c8d92 00000010813ef89d 00000000805ea732 0000000000000009 0000000000000024 ffff88003cc39b80 ffff88003d7bfce0 ffffffff814c8f66 Call Trace: [<ffffffff814c8d92>] eoi_pirq+0xb2/0xf0 [<ffffffff814c8f66>] __startup_pirq+0xe6/0x150 [<ffffffff814ca659>] xen_irq_resume+0x319/0x360 [<ffffffff814c7e75>] xen_suspend+0xb5/0x180 [<ffffffff81120155>] multi_cpu_stop+0xb5/0xe0 [<ffffffff811200a0>] ? cpu_stop_queue_work+0x80/0x80 [<ffffffff811203d0>] cpu_stopper_thread+0xb0/0x140 [<ffffffff810a94e6>] ? finish_task_switch+0x76/0x220 [<ffffffff810ca731>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff810a3935>] smpboot_thread_fn+0x105/0x160 [<ffffffff810a3830>] ? sort_range+0x30/0x30 [<ffffffff810a0588>] kthread+0xd8/0xf0 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 [<ffffffff8182568f>] ret_from_fork+0x3f/0x70 [<ffffffff810a04b0>] ? kthread_create_on_node+0x1e0/0x1e0 Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-24Xen: don't warn about 2-byte wchar_t in efiArnd Bergmann
The XEN UEFI code has become available on the ARM architecture recently, but now causes a link-time warning: ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail This seems harmless, because the efi code only uses 2-byte characters when interacting with EFI, so we don't pass on those strings to elsewhere in the system, and we just need to silence the warning. It is not clear to me whether we actually need to build the file with the -fshort-wchar flag, but if we do, then we should also pass --no-wchar-size-warning to the linker, to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")
2016-05-24xen/gntdev: reduce copy batch size to 16David Vrabel
IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number of hypercalls. The stack is used to avoid a memory allocation in a hot path. However, a batch size of 24 requires more than 1024 bytes of stack which in some configurations causes a compiler warning. xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’: xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is larger than 1024 bytes [-Wframe-larger-than=] This is a harmless warning as there is still plenty of stack spare, but people keep trying to "fix" it. Reduce the batch size to 16 to reduce stack usage to less than 1024 bytes. This should have minimal impact on performance. Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-10target: make close_session optionalChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10target: make ->shutdown_session optionalChristoph Hellwig
Turns out the template and thus many drivers got the return value wrong: 0 means the fabrics driver needs to put a session reference, which no driver except for the iSCSI target drivers did. Fortunately none of these drivers supports explicit Node ACLs, so the bug was harmless. Even without that only qla2xxx and iscsi every did real work in shutdown_session, so get rid of the boilerplate code in all other drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-07Merge branch 'linus' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-04xen/evtchn: fix ring resize when binding new eventsJan Beulich
The copying of ring data was wrong for two cases: For a full ring nothing got copied at all (as in that case the canonicalized producer and consumer indexes are identical). And in case one or both of the canonicalized (after the resize) indexes would point into the second half of the buffer, the copied data ended up in the wrong (free) part of the new buffer. In both cases uninitialized data would get passed back to the caller. Fix this by simply copying the old ring contents twice: Once to the low half of the new buffer, and a second time to the high half. This addresses the inability to boot a HVM guest with 64 or more vCPUs. This regression was caused by 8620015499101090 (xen/evtchn: dynamically grow pending event channel ring). Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-04-29efi: Remove unnecessary (and buggy) .memmap initialization from the Xen EFI ↵Ingo Molnar
driver So the following commit: 884f4f66ffd6 ("efi: Remove global 'memmap' EFI memory map") ... triggered the following build warning on x86 64-bit allyesconfig: drivers/xen/efi.c:290:47: warning: missing braces around initializer [-Wmissing-braces] It's this initialization in drivers/xen/efi.c: static const struct efi efi_xen __initconst = { ... .memmap = NULL, /* Not used under Xen. */ ... which was forgotten about, as .memmap now is an embedded struct: struct efi_memory_map memmap; We can remove this initialization - it's an EFI core internal data structure plus it's not used in the Xen driver anyway. Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: ard.biesheuvel@linaro.org Cc: bp@alien8.de Cc: linux-tip-commits@vger.kernel.org Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/20160429083128.GA4925@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-06xen/balloon: Fix crash when ballooning on x86 32 bit PAERoss Lagerwall
Commit 55b3da98a40dbb3776f7454daf0d95dde25c33d2 (xen/balloon: find non-conflicting regions to place hotplugged memory) caused a regression in 4.4. When ballooning on an x86 32 bit PAE system with close to 64 GiB of memory, the address returned by allocate_resource may be above 64 GiB. When using CONFIG_SPARSEMEM, this setup is limited to using physical addresses < 64 GiB. When adding memory at this address, it runs off the end of the mem_section array and causes a crash. Instead, fail the ballooning request. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-04-04xen/events: Mask a moving irqBoris Ostrovsky
Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-22Merge tag 'for-linus-4.6-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.6: - Make earlyprintk=xen work for HVM guests - Remove module support for things never built as modules" * tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: make platform-pci.c explicitly non-modular drivers/xen: make sys-hypervisor.c explicitly non-modular drivers/xen: make xenbus_dev_[front/back]end explicitly non-modular drivers/xen: make [xen-]ballon explicitly non-modular xen: audit usages of module.h ; remove unnecessary instances xen/x86: Drop mode-selecting ifdefs in startup_xen() xen/x86: Zero out .bss for PV guests hvc_xen: make early_printk work with HVM guests hvc_xen: fix xenboot for DomUs hvc_xen: add earlycon support
2016-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add target_alloc_session() w/ callback helper for doing se_session allocation + tag + se_node_acl lookup. (HCH + nab) - Tree-wide fabric driver conversion to use target_alloc_session() - Convert sbp-target to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Chris Boot + nab) - Convert usb-gadget to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Andrzej Pietrasiewicz + nab) - Convert xen-scsiback to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Juergen Gross + nab) - Convert tcm_fc to use TARGET_SCF_ACK_KREF I/O + TMR krefs - Convert ib_srpt to use percpu_ida tag pre-allocation - Add DebugFS node for qla2xxx target sess list (Quinn) - Rework iser-target connection termination (Jenny + Sagi) - Convert iser-target to new CQ API (HCH) - Add pass-through WRITE_SAME support for IBLOCK (Mike Christie) - Introduce data_bitmap for asynchronous access of data area (Sheng Yang + Andy) - Fix target_release_cmd_kref shutdown comp leak (Himanshu Madhani) Also, there is a separate PULL request coming for cxgb4 NIC driver prerequisites for supporting hw iscsi segmentation offload (ISO), that will be the base for a number of v4.7 developments involving iscsi-target hw offloads" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits) target: Fix target_release_cmd_kref shutdown comp leak target: Avoid DataIN transfers for non-GOOD SAM status target/user: Report capability of handling out-of-order completions to userspace target/user: Fix size_t format-spec build warning target/user: Don't free expired command when time out target/user: Introduce data_bitmap, replace data_length/data_head/data_tail target/user: Free data ring in unified function target/user: Use iovec[] to describe continuous area target: Remove enum transport_lunflags_table target/iblock: pass WRITE_SAME to device if possible iser-target: Kill the ->isert_cmd back pointer in struct iser_tx_desc iser-target: Kill struct isert_rdma_wr iser-target: Convert to new CQ API iser-target: Split and properly type the login buffer iser-target: Remove ISER_RECV_DATA_SEG_LEN iser-target: Remove impossible condition from isert_wait_conn iser-target: Remove redundant wait in release_conn iser-target: Rework connection termination iser-target: Separate flows for np listeners and connections cma events iser-target: Add new state ISER_CONN_BOUND to isert_conn ...
2016-03-21drivers/xen: make platform-pci.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: arch/x86/xen/Kconfig:config XEN_PVHVM arch/x86/xen/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. In removing "module" from the init fcn name, we observe a namespace collision with the probe function, so we use "probe" in the name of the probe function, and "init" in the registration fcn, as per standard convention, as suggested by Stefano. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>