summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-08-05xen-netback: Using a new state bit instead of carrierZoltan Kiss
This patch introduces a new state bit VIF_STATUS_CONNECTED to track whether the vif is in a connected state. Using carrier will not work with the next patch in this series, which aims to turn the carrier temporarily off if the guest doesn't seem to be able to receive packets. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org v2: - rename the bitshift type to "enum state_bit_shift" here, not in the next patch Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05Merge tag 'master-2014-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05net/usb/hso: Add support for Option GTM671WFSRicardo Ribalda
After this patch: [ 32.985530] hso: drivers/net/usb/hso.c: Option Wireless [ 33.000452] hso 2-1.4:1.7: Not our interface [ 33.001849] usbcore: registered new interface driver hso root@qt5022:~# ls /dev/ttyHS* /dev/ttyHS0 /dev/ttyHS1 /dev/ttyHS2 /dev/ttyHS3 /dev/ttyHS4 /dev/ttyHS5 root@qt5022:~# lsusb -d 0af0: -vvv Bus 002 Device 003: ID 0af0:9200 Option Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0af0 Option idProduct 0x9200 bcdDevice 0.00 iManufacturer 3 Option N.V. iProduct 2 Globetrotter HSUPA Modem iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 200 bNumInterfaces 8 bConfigurationValue 1 iConfiguration 1 Option Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05net: smc911x: fix %d confusingly prefixed with 0x in format stringHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05drivers: atm: fix %d confusingly prefixed with 0x in format stringsHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04Drivers: net-next: hyperv: Increase the size of the sendbuf regionKY Srinivasan
Intel did some benchmarking on our network throughput when Linux on Hyper-V is as used as a gateway. This fix gave us almost a 1 Gbps additional throughput on about 5Gbps base throughput we hadi, prior to increasing the sendbuf size. The sendbuf mechanism is a copy based transport that we have which is clearly more optimal than the copy-free page flipping mechanism (for small packets). In the forwarding scenario, we deal only with MTU sized packets, and increasing the size of the senbuf area gave us the additional performance. For what it is worth, Windows guests on Hyper-V, I am told use similar sendbuf size as well. The exact value of sendbuf I think is less important than the fact that it needs to be larger than what Linux can allocate as physically contiguous memory. Thus the change over to allocating via vmalloc(). We currently allocate 16MB receive buffer and we use vmalloc there for allocation. Also the low level channel code has already been modified to deal with physically dis-contiguous memory in the ringbuffer setup. Based on experimentation Intel did, they say there was some improvement in throughput as the sendbuf size was increased up to 16MB and there was no effect on throughput beyond 16MB. Thus I have chosen 16MB here. Increasing the sendbuf value makes a material difference in small packet handling In this version of the patch, based on David's feedback, I have added additional details in the commit log. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04net: remove spurious zd1201 rule.Francois Romieu
Leftover from 5c601d0c942f5aaf7f3cff7e08f61047d70a964e ("wireless: move zd1201 where it belongs"). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04net: phy: spi_ks8995: Introduce the use of devm_kzallocHimangi Saraogi
This patch introduces the use of devm_kzalloc and does away with the kfrees in the probe and remove functions. Also, a label is removed. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04cxgb4: only free allocated flsHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03cxgb4i : remove spurious use of rcuAnish Bhatt
As pointed out by the intel guys, there is no need to hold rcu read lock in cxgbi_inet6addr_handler(), this patch removes it. Fixes: 759a0cc5a3e1 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: Fixed guest OS panic when removing vf driverSerey Kong
Removing VF driver during device still in reset caused guest OS panic. in the i40evf_remove(), we're trying to clean mac_filter_list which has not been initialized since the device is still stuck at the reset. The change is to initialize the filter_list before setting any task. Change-ID: I8b59df7384416c7e6f2d264b598f447e1c2c92b0 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: fix memory leak on unused interfacesMitch Williams
If the driver is loaded and then unloaded before the interface is brought up, then it will allocate a MAC filter entry and never free it. To fix this, on unload, run through the mac filter list and free all the entries. We also do this during reset recovery when the driver cannot contact the PF and needs to shut down completely. Change-ID: I15fabd67eb4a1bfc57605a7db60d0b5d819839db Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: don't leak queue vectorsMitch Williams
Fix a memory leak. Driver was allocating memory for queue vectors on init but not freeing them on shutdown. These need to be freed at two different times: during module unload, and during reset recovery when the driver cannot contact the PF driver and needs to give up. Change-ID: I7c1d0157a776e960d4da432dfe309035aad7c670 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: do not re-arm watchdog after removeAshish Shah
Add in an adapter state check to prevent re-arming watchdog timer after i40evf_remove has been called and timer has been deleted. Change-ID: I636ba7c6322be8cbf053231959f90c0a2d8d803a Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: future-proof vfr_stat state checkAshish Shah
Previously defined state I40E_VFR_VFACTIVE uses bit 1 which is now set to "reserved." Update the state checks to also include I40E_VFR_COMPLETED. This change will allow the VF to work with both existing and future PFs. Change-ID: Ifd1d34f79f3b0ffd6d2550ee4dadc55825ff52f8 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: remove support for vf unicast promiscuous modeAshish Shah
Remove the ability of a VF to set unicast promiscuous mode. Considered to be a security risk to allow VFs to receive traffic intended for other VFs so don't allow it, simply ignore the flag. Also fix it to send the correct seid to aq for multicast promiscuous set. Change-ID: Icb9c49a281a8e9d3aeebf991ef1533ac82b84b14 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: Minor comment changesAkeem G Abodunrin
Fixes comment for reset reason Change-ID: I6fda4fa292255e6eb0f874502b4d38d722149b10 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40evf: fix scan warning on sprintfJesse Brandeburg
The driver was converted to use snprintf everywhere but this one function. Just use snprintf, instead of sprintf. Also a small spelling correction in a comment. Change-ID: I59d45f94a52754c7b4cd6034df9a61d8132b7f77 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: disable local loopback on vmdq vsiShannon Nelson
The local loopback should only be enabled for VSIs that are supporting cascaded VEBs or VEPA setups. This is not the case here, and we need to stop the VEB from echoing the VMDQ VSI packets back at the VSI. Change-ID: I9dfb6ac79db24d04360d7efde62d81e20abc5090 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: use correct vf_id offset for virtchnl messageAshish Shah
The vf_id needs to be offset by the vf_base_id from hw function capabilities for the case of multiple PFs. Change-ID: I20ca8621f98e9cdf98649380b8eeaa35db52677c Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: expose debug_write_register requestShannon Nelson
Now that the HW registers are no longer in debug mode and many are locked down for writes, we need to expose the Firmware API request used to do writes on the driver's behalf. Change-ID: I09a05c4dc9ea0b24c00193faac34d7799eaa8496 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: adds FCoE to build and updates its documentationVasu Dev
Adds newly added FCoE files to the build but only if FCoE module is configured. Also, updates i40e document for added FCoE support. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: Adds FCoE related code to i40e core driverVasu Dev
Adds FCoE specific code to existing i40e core driver to:- 1. have separate FCoE VSI with additional FCoE queues pairs. 2. have FCoE related hash defines. 3. have additional FCoE related stats code. 4. export and then re-use existing functions required by FCoE build. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03i40e: adds FCoE code to the i40e driverVasu Dev
This patch adds FCoE ( Fibre Channel Over Ethernet ) code for Intel XL710 adapters. This patch is limited to only new FCoE offloads code in newly added files by this patch and then following patches in the series modifies rest of the existing driver to enable FCoE with i40e driver. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03amd-xgbe-phy: Allow more time for Rx/Tx to become readyLendacky, Thomas
The current time range waiting for Rx/Tx to become ready can sometimes be too short if a connection is not present. Increase the number of retries and the sleep to give a bit more time. Also, change level of the message issued from _err to _dbg if Rx/Tx do not become ready since the underlying logic will function as if no link is established and retry eventually. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-03amd-xgbe: Remove unnecessary spinlocksLendacky, Thomas
Remove the spinlocks around the ethtool get and set settings functions and within the link adjustment callback routine. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: dnet: Use managed interfacesHimangi Saraogi
This patch introduces the use of managed interfaces like devm_ioremap_resource and does away with the calls to free the allocated memory in the probe and remove functions. Also, some labels and variable are done away with. This fixes a bug as there was a missing release_mem_region in the remove function. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: ks8851-ml: Use devm_ioremap_resourceHimangi Saraogi
This patch introduces the use of devm_ioremap_resource, devm_kmalloc and does away with the functions to free the allocated memory in the probe and remove functions. Also, some labels are done away with. A bug is fixed as two regions are allocated in the probe function, but only one is freed in the remove function. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02cirrus: cs89x0: Use managed interfacesHimangi Saraogi
This patch introduces the use of managed interfaces like devm_ioremap_resource and does away with the functions to free the allocated memory in the probe and remove functions. Also, many labels are done away with. The field size in no longer needed and is hence removed from the struct net_local. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: sh_eth: Add r8a7794 supportHisashi Nakamura
Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> [uli: added bindings documentation] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02be2net: support deleting FW dump via ethtool (only for Lancer)Kalesh AP
This patch adds support to delete an existing FW-dump in Lancer via ethtool. Initiating a new dump is not allowed if a FW dump is already present in the adapter. The existing dump has to be first explicitly deleted. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02be2net: ignore VF mac address setting for the same macVasundhara Volam
ndo_set_vf_mac() call may be issued for a mac-addr that is already active on a VF. If so, silently ignore the request. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02be2net: ignore get/set profile FW cmd failuresSathya Perla
Old versions of BE3 FW may not support cmds to re-provision (and hence optimize) resources/queues in SR-IOV config. Do not treat this FW cmd failure as fatal and fail the function initialization. Instead, just enable SR-IOV with the resources provided by the FW. Prior to the "create optimal number of queues on SR-IOV config" patch such failures were ignored. Fixes: bec84e6b2 ("create optimal number of queues on SR-IOV config") Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02dm9000: NULL dereferences on error in probe()Dan Carpenter
The dm9000_release_board() function is called with NULL ->data_req and ->addr_req pointers if dm9000_probe() fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: filter: split 'struct sk_filter' into socket and bpf partsAlexei Starovoitov
clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-01ISDN: pcbit: off by one bugs in pcbit_set_msn()Dan Carpenter
1) We don't allocate enough space for the NUL terminator so we end up corrupting one character beyond the end of the buffer. 2) The "len - 1" should just be "len". The code is trying to copy a word from a buffer up to a comma or the last word in the buffer. Say you have the buffer, "foo,bar,baz", then this code truncates the last letter off each word so you get "fo", "ba", and "ba". You would hope this kind of bug would get noticed in testing... I'm not very familiar with this code and I can't test it, but I think we should copy the final character. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-01AX88179_178A: Add ethtool ops for EEE supportFreddy Xin
Add functions to support ethtool EEE manipulating, and the EEE is disabled in default setting to enhance the compatibility with certain switch. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31net: stmmac: Support devicetree configs for mcast and ucast filter entriesVince Bridgers
This patch adds and modifies code to support multiple Multicast and Unicast Synopsys MAC filter configurations. The default configuration is defined to support legacy driver behavior, which is 64 Multicast bins. The Unicast filter code previously assumed all controllers support 32 or 16 Unicast addresses based on controller version number, but this has been corrected to support a default of 1 Unicast address. The filter configuration may be specified through the devicetree using a Synopsys specific device tree entry. This information was verified with Synopsys through Synopsys Support Case #8000684337 and shared with the maintainer. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31net: stmmac: Correct set_filter for multicast and unicast casesVince Bridgers
This patch removes the check for the number of mulitcast addresses when using hash based filtering since it's not necessary. If the number of multicast addresses in the list exceeds the number of multicast hash bins, the bins will "fold" over into one of the bins configured and enabled for the particular component instance. The default number of maximum unicast addresses was changed from 32 to 1 since this number is not dependent on the component revision. The maximum number of multicast and unicast addresses is dependent on the configuration of the Synopsys EMAC configured by the SOC architect at the time the features were selected and configured for a particular component. Sadly, Synopsys does not provide a way to query the precise number supported by a particular component, so we must fall back on a devicetree entry. This configuration could vary from vendor to vendor (such as STMicro, Altera, etc). The multicast bins are set for every possible filtering case (including no entries) - previously the bits were set only if multicast filter entries were present. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31net: stmmac: Change MAC interface to support multiple filter configurationsVince Bridgers
The synopsys EMAC can be configured for different numbers of multicast hash bins and perfect filter entries at device creation time and there's no way to query this configuration information at runtime. As a result, a devicetree parameter is required in order for the driver to program these filters correctly for a particular device instance. This patch modifies the 10/100/1000 MAC software interface such that these configuration parameters can be set at initialization time. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31team: fix releasing uninitialized pointer to BPF progDaniel Borkmann
Commit 34c5bd66e5ed introduced the possibility that an uninitialized pointer on the stack (orig_fp) can call into sk_unattached_filter_destroy() when its value is non NULL. Before that commit orig_fp was only destroyed in the same block where it was assigned a valid BPF prog before. Fix it up by initializing it to NULL. Fixes: 34c5bd66e5ed ("net: filter: don't release unattached filter through call_rcu()") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Pablo Neira <pablo@netfilter.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31bcma: use NS prefix for names of Northstar specific coresRafał Miłecki
It's cleaner and we don't have quite identical names like BCMA_CORE_PCIEG2 and BCMA_CORE_PCIE2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31b43: N-PHY: fix "Data bus error" while working in 5 GHzRafał Miłecki
When switching from one 5 GHz channel to another 5 GHz channel we need to make sure BPHY is still in a reset. However to access BPHY register we have to switch to 2 GHz mode for a moment. Otherwise this may result in "Data bus error" (noticed by Hauke with BCM43224 connected to the SoC). Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31b43: update PHY descriptions in KconfigRafał Miłecki
Add lists of chipsets, so people can enable support for their device easier (at least after checking lspci). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Add TDLS support to msgbuf.Hante Meuleman
TDLS connections require dedicated flowrings. This patches adds TDLS event handling and flowring creation/deletion based on these events. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Fix msgbuf flow control.Hante Meuleman
Msgbuf flow control was using a function to flow off and on which was not supported without proptx enabled. Also flow control needs to be handled per ifidx. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Update pcie reset device routine.Hante Meuleman
When a pcie device gets reset then the low power modes l1 and l2 should be temporarily disabled. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Adding PCIe bus layer support.Hante Meuleman
This patch will add PCIe support. With this patch the PCIe chipsets 43602, 4354, 4356, 43567, and 43570 will be supported. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Adding msgbuf protocol.Hante Meuleman
This patch will add the msgbuf protocol. This protocol is used by the soon to be added new bus interface PCIe. Msgbuf is a protocol where most data is and remains located on the host (driver) side and transferred by DMA from and to device. Msgbuf is the protocol which takes care of the signalling of the buffers between host and device which identifies this DMA-able data. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31brcmfmac: Add protocol addressing mode and peer deletion API.Hante Meuleman
The soon to be added protocol msgbuf requires information about interface addressing mode and peer deletion. This patch adds the necessary APIs to proto, implements dummy functions in BCDC and adds calls to proto wherever necessary by wl_cfg80211. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>