summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-08-14mfd: core: Copy DMA mask and params from parentBenedikt Spranger
The child device intends to perform DMA operations then it needs a dma mask and params set. This patches copies them from the parent device. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Holger Dengler <dengler@linutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: tps65010: Use power efficient workqueue for power pollingMark Brown
There is no need to use a per CPU workqueue to poll, especially with the 5s delay used, so allow the scheduler to use any CPU. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: Add support for COMe-bHL6 and COMe-cTH6 to Kontron PLD driverMichael Brunner
This patch adds DMI system IDs for the new Kontron modules COMe-bHL6 and COMe-cTH6 to the Kontron PLD driver. Acked-by: Kevin Strasser <strassek@engr.orst.edu> Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: palmas: Add power off controlBill Huang
Hook up "pm_power_off" to palmas power off routine if there is DT property "ti,system-power-controller" defined, so platform which is powered by this regulator can be powered off properly. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com> Signed-off-by: Bill Huang <bilhuang@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: sec: Add clock cell for s2mps11Yadwinder Singh Brar
This patch adds clock to list of mfd cells for s2mps11 and DT documentation for clock part. Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Set FX_CTRL2 to volatileCharles Keepax
FX_CTRL2 is a volatile register and should be marked as such, this patch does so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Add missing Mic Detect 3 register into defaultsCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Add mic detect level registersCharles Keepax
The mic detect level registers are used from common code to configure the button detection code. Add these registers to the defaults list and mark them as readable for wm5110. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: wm5110: Mark register containing FLL gains as readableCharles Keepax
The FLL gains are present on all devices and controlled from common code shared between them. This patch adds these registers into defaults list for wm5110 and marks them as readable. Reported-by: D.J. Barrow <dbarrow@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: ti_am335x_tscadc: Fix spin lock and reg_cacheZubair Lutfullah
Reg_cache variable is used to lock step enable register from being accessed and written by both TSC and ADC at the same time. However, it isn't updated anywhere in the code at all. If both TSC and ADC are used, eventually 1FFFF is always written enabling all 16 steps uselessly causing a mess. Patch fixes it by correcting the locks and updates the variable by reading the step enable register Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: arizona: Move regulator disable to after marking cache onlyCharles Keepax
If we disable DCVDD before we mark the cache as cache only, we might attempt to write to the chip whilst it is powered down and lose a write. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: ab8500-gpadc: Add CONFIG_PM_SLEEP to suspend/resumeJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build warnings when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/mfd/ab8500-gpadc.c:891:12: warning: 'ab8500_gpadc_suspend' defined but not used [-Wunused-function] drivers/mfd/ab8500-gpadc.c:903:12: warning: 'ab8500_gpadc_resume' defined but not used [-Wunused-function] Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-14mfd: ab8500-gpadc: Add CONFIG_PM_RUNTIME to runtime_suspend/runtime_resumeJingoo Han
Add CONFIG_PM_RUNTIME to runtime_suspend/runtime_resume functions to fix the build warnings when CONFIG_PM_RUNTIME is not selected. This is because runtime PM callbacks defined by SET_RUNTIME_PM_OPS are only used when the CONFIG_PM_RUNTIME is enabled. drivers/mfd/ab8500-gpadc.c:870:12: warning: 'ab8500_gpadc_runtime_suspend' defined but not used [-Wunused-function] drivers/mfd/ab8500-gpadc.c:878:12: warning: 'ab8500_gpadc_runtime_resume' defined but not used [-Wunused-function] Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-07MFD: ucb1x00-core: Add CONFIG_PM_SLEEP to suspend/resumeJingoo Han
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build warnings when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/mfd/ucb1x00-core.c:672:12: warning: 'ucb1x00_suspend' defined but not used [-Wunused-function] drivers/mfd/ucb1x00-core.c:704:12: warning: 'ucb1x00_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-07mfd: menelaus: Use NULL instead of 0Jingoo Han
'mmc_callback_data' and 'vtg' are pointers. Fix the following sparse warning: drivers/mfd/menelaus.c:445:43: warning: Using plain integer as NULL pointer drivers/mfd/menelaus.c:469:20: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-01mfd: twl4030-power: Staticize local functionsJingoo Han
twl4030_power_configure_scripts(), twl4030_power_configure_resources(), twl4030_power_probe() are used only in this file. Fix the following sparse warnings: drivers/mfd/twl4030-power.c:496:5: warning: symbol 'twl4030_power_configure_scripts' was not declared. Should it be static? drivers/mfd/twl4030-power.c:512:5: warning: symbol 'twl4030_power_configure_resources' was not declared. Should it be static? drivers/mfd/twl4030-power.c:556:5: warning: symbol 'twl4030_power_probe' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-01mfd: lpc_ich: Staticize struct 'lpc_chipset_info'Jingoo Han
'lpc_chipset_info' is used only in this file. Fix the following sparse warning: drivers/mfd/lpc_ich.c:216:21: warning: symbol 'lpc_chipset_info' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-01mfd: max8997: Cast void pointer to data of max8997_pmic_dt_matchJingoo Han
Casting (void *) data of max8997_pmic_dt_match is necessary, because variable 'data' of struct 'of_device_id' is defined as 'const void *data'. Thus, pointer should be used instead of value. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31mfd: stmpe: Staticise stmpe_of_probe()Mark Brown
It is only called from this file so there is no need for it to be in the global namespace and cause sparse to warn. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31mfd: Use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31mfd: wm831x: Remove erronious bits per word setMark Brown
Since the conversion to the regmap API setting bits per word will lead to data corruption since the regmap API already configures the bits per word appropriately. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-07-31MFD: ti_tscadc: Disable TSC config registers in adc modePatil, Rachna
AFE Pen Ctrl and TouchScreen transistors enabling is not required when only ADC mode is being used, so check for availability of TSC driver before accessing control register. Signed-off-by: Patil, Rachna <rachna@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31MFD: ti_tscadc: ADC Clock check not requiredPatil, Rachna
ADC is ideally expected to work at a frequency of 3MHz. The present code had a check, which returned error if the frequency went below the threshold value. But since AM335x supports various working frequencies, this check is not required. Now the code just uses the internal ADC clock divider to set the ADC frequency w.r.t the sys clock. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: wm8994: Remove check for active audio in runtime suspendMark Brown
Since enabling VMID takes a runtime PM reference there is no need to suppress suspend when doing a runtime suspend. Similarly the digital inputs and outputs are DAPM widgets and therefore the ASoC core will be holding a reference for them. This used to be required when integration with system suspend was being bodged. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: wm8994: Remove unneeded check for JACKDETMark Brown
The jack detection code holds runtime PM references when required so there is no need for suspend to do any checks. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: wm8997: Make Kconfig prompt for WM8997 more consistentMark Brown
The Kconfig prompt for WM8997 says "Support for..." while the other MFD Kconfigs (including the adjacent ones for other Arizona devices) just list the device name which sticks out like a sore thumb when doing configuration. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: syscon: Remove "base" field from private driver dataAlexander Shiyan
During a move to use managed resources, the .remove function all was deemed superfluous which subsequently led to its deletion. As there are no remaining users of the stored 'base' address we only have to use it locally during probe. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: twl6040: Cleanup in early error handling in probe functionPeter Ujfalusi
The err: label is not needed we can just return instead of the jump there. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: twl6040: Cosmetic, parameter alignment changePeter Ujfalusi
To comply with coding style. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: twl6040: Remove support for legacy (pdata) modePeter Ujfalusi
TWL6040 is used only with OMAP4/5 SoCs and they can only boot in in DT mode. The support for pdata/legacy boot can be removed. Add TODO comment to the header file that all pdata struct can be removed in the next merge window (after the sub driver updates are in). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: sec: Add register cache for interrupt mask registersMark Brown
The performance of regmap-irq is improved if the interrupt mask registers can be cached since it does read/modify/update cycles so start using the register cache infrastructure for those registers. We should use this more widely but I don't have a datasheet and this is a nice, conservative starting point. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: Update DA9055 i2c device id nameAnkur Raina
DA9055 is a combination of pmic and codec. This patch updates the DA9055 i2c device id name to match the standard naming convention followed for such chips. Signed-off-by: Ankur Raina <Ankur.Raina@kpitcummins.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: Fix for DA9055 driver initializationAnkur Raina
This patch clears all the events received while powering up DA9055. While powering up DA9055, both power sequencer and gpio events are received. These events remain uncleared after boot up, due to which further event handling also fails. DA9055 has three event registers. The event register bits are set to '1' on receiving an event. The events can be cleared on writing a '1' to the set bit, which would then clear that bit to '0'. After applying this patch we have a clean state after boot up. Signed-off-by: Ankur Raina <Ankur.Raina@kpitcummins.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31mfd: s2mps11: Add device tree supportYadwinder Singh Brar
This patch adds DT compatible string for s2mps11 and binding documentation. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-29Merge tag 'pinctrl-for-v3.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path
2013-07-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is five bug fixes, two of which fix long standing problems causing crashes (sd and mvsas). The remaining three are hung (isci race) or lost (qla2xxx, isci) devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] isci: fix breakage caused by >16byte CDB patch [SCSI] mvsas: Fix kernel panic on tile due to unaligned data access [SCSI] sd: fix crash when UA received on DIF enabled device [SCSI] qla2xxx: Properly set the tagging for commands. [SCSI] isci: Fix a race condition in the SSP task management path
2013-07-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "This is just a regular fixes pull apart from the qxl one, it has radeon and intel bits in it, The intel fixes are for a regression with the RC6 fix and a 3.10 hdmi regression, whereas radeon is more DPM fixes, a few lockup fixes and some rn50/r100 DAC fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/dpm: fix r600_enable_sclk_control() drm/radeon/dpm: implement force performance levels for rv6xx drm/radeon/dpm: fix displaygap programming on rv6xx drm/radeon/dpm: fix a typo in the rv6xx mclk setup drm/i915: initialize gt_lock early with other spin locks drm/i915: fix hdmi portclock limits drm/radeon: fix combios tables on older cards drm/radeon: improve dac adjust heuristics for legacy pdac drm/radeon: Another card with wrong primary dac adj drm/radeon: fix endian issues with DP handling (v3) drm/radeon/vm: only align the pt base to 32k drm/radeon: wait for 3D idle before using CP DMA
2013-07-26Merge branch 'qxl-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull qxl drm fixes from Dave Airlie: "Okay as I warned, the qxl driver was running a bit free and loose with its ttm object reservations and the new lockdep enabled reservation tracking shone a bright light into it, it also with the new reservations mutexes hits a possible deadlock during boot. The first patch is a real fix to render the console correctly as the driver used to just drop irq renderering as too hard, this also fixes a sleeping while atomic warning. The other two patches are the big ugly ones that redo how the driver allocates objects and reserves them and makes things all work properly, I've tested this in a VM, and compared to the current code which hits a lockdep warning and the sleep while atomic warning before failing. So sorry this is coming in late, I should have tested qxl before merging the mutex code, but I'd rather just fix qxl with this than revert the reservations code at this point" * 'qxl-fixes' of git://people.freedesktop.org/~airlied/linux: qxl: convert qxl driver to proper use for reservations qxl: allow creation of pre-pinned objects and use for releases. drm/qxl: add delayed fb operations
2013-07-26Merge tag 'pm+acpi-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are just two fixes, a revert of the would-be backlight fix that didn't work and an intel_pstate fix for two problems related to maximum P-state selection. Specifics: - Revert of the ACPI video commit that I hoped would help fix backlight problems related to Windows 8 compatibility on some systems. Unfortunately, it turned out to cause problems to happen too. - Fix for two problems in intel_pstate, a possible failure to respond to a load change on a quiet system and a possible failure to select the highest available P-state on some systems. From Dirk Brandewie" * tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / video / i915: No ACPI backlight if firmware expects Windows 8" cpufreq / intel_pstate: Change to scale off of max P-state
2013-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a largeish batch of fixes, mostly because I missed -rc2 due to travel/vacation. So in number these are a bit more than ideal unless you amortize them over two -rcs. Quick breakdown: - Defconfig updates - Making multi_v7_defconfig useful on more hardware to encourage single-image usage - Davinci and nomadik updates due to new code merged this merge window - Fixes for UART on Samsung platforms, both PM and clock-related - A handful of warning fixes from defconfig builds, including for max8925 backlight and pxamci (both with appropriate acks) - Exynos5440 fixes for LPAE configuration, PM - ...plus a bunch of other smaller changes all over the place I expect to switch to regressions-or-severe-bugs-only fixes from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) mfd: max8925: fix dt code for backlight ARM: omap5: Only select errata 798181 if SMP ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: multi_v7_defconfig: Select USB chipidea driver ARM: pxa: propagate errors from regulator_enable() to pxamci ARM: zynq: fix compilation warning ARM: keystone: fix compilation warning ARM: highbank: Only touch common coherency control register fields ARM: footbridge: fix overlapping PCI mappings dmaengine: shdma: fix a build failure on platforms with no DMA support ARM: STi: Set correct ARM ERRATAs. ARM: dts: STi: Fix pinconf setup for STiH416 serial2 ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs ARM: davinci: defconfig: enable EDMA driver ...
2013-07-26Merge tag 'usb-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for 3.11-rc3. Lots of little things, nothing major. A number of new device ids, build fixes for DMA, and a bunch of other minor things. All of these have been in the linux-next tree" * tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) usb: Clear both buffers when clearing a control transfer TT buffer. usb/gadget: free opts struct on error recovery USB: mos7840: fix memory leak in open usb: serial: option.c: remove ONDA MT825UP product ID fromdriver usb: serial: option: add Olivetti Olicard 200 usb: serial: option: blacklist ONDA MT689DC QMI interface xhci: fix null pointer dereference on ring_doorbell_for_active_rings usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0 usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled usb: xhci: Mark two functions __maybe_unused xhci: Avoid NULL pointer deref when host dies. usb: serial: option: Add ONYX 3G device support USB: ti_usb_3410_5052: fix dynamic-id matching usb: option: add TP-LINK MA260 USB: option: add D-Link DWM-152/C1 and DWM-156/C1 USB: EHCI: Fix resume signalling on remote wakeup USB: cp210x: add MMB and PI ZigBee USB Device Support usb: cp210x support SEL C662 Vendor/Device USB: option: append Petatel NP10T device to GSM modems list USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga ...
2013-07-26Merge tag 'tty-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are 3 fixes for TTY and serial issues that have been reported. Nothing huge, but nice to get fixed" * tag 'tty-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS' tty/8250_early: Don't truncate last character of options TTY: snyclinkmp: calculating wrong addresses
2013-07-26Merge tag 'staging-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some tiny drivers/staging/ fixes for 3.11-rc3 A number of bugfixes, all pretty tiny, but resolve issues that have been reported (the kstrtos32 change fixes a data corruption problem that Dan found). And a MAINTAINERS file update for the comedi drivers" * tag 'staging-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: Update the list of maintainers for staging/comedi driver. staging: tidspbridge: replace strict_strtol() with kstrtos32() staging: android: logger: Correct write offset reset on error staging: zram: protect zram_reset_device() call staging: gdm72xx: potential use after free in send_qos_list() staging: drm/imx: drop "select OF_VIDEOMODE" staging: frontier: use after free in disconnect() staging: comedi: fix a race between do_cmd_ioctl() and read/write staging: comedi: COMEDI_CANCEL ioctl should wake up read/write
2013-07-26Merge tag 'char-misc-3.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patches from Greg KH: "Here are some char/misc patches for 3.11-rc3. It's pretty much just: - mei fixes - hyperv fixes - new ja_JP translation update all tiny stuff, but fixes for issues people have reported." * tag 'char-misc-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: HOWTO ja_JP sync mei: me: fix waiting for hw ready mei: don't have to clean the state on power up mei: me: fix reset state machine mei: hbm: fix typo in error message Tools: hv: KVP: Fix a bug in IPV6 subnet enumeration Drivers: hv: balloon: Do not post pressure status if interrupted Drivers: hv: balloon: Fix a bug in the hot-add code Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
2013-07-26Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a handful of regression and small fixes in ASoC, HD-audio and USB-audio drivers. - Sigmetal HD-audio codec regression fixes - A copule of XRUN indication fixes for usb-audio devices - ASoC: ep93xx build fix, sgtl5000 fix for probe order changes, max98088 register access fix, etc" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hiface: return correct XRUN indication ASoC: tegra: correct playback_dma_data setup ASoC: core: double free in snd_soc_add_platform() ALSA: usb-audio: 6fire: return correct XRUN indication ASoC: ep93xx: fix build of ep93xx-ac97.c ALSA: hda - Remove NO_PRESENCE bit override for Dell 1420n Laptop ALSA: hda - Fix EAPD GPIO control for Sigmatel codecs ASoC: atmel-ssc: remove clk_disable_unprepare call from critical section ASoC: sgtl5000: defer the probe if clock is not found ASoC: max98088 - fix element type of the register cache.
2013-07-26Merge tag 'md/3.11-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Two more bugfixes for md in 3.11 Both marked for -stable, both since 3.3. I guess I should spend more time testing..." * tag 'md/3.11-fixes' of git://neil.brown.name/md: md/raid5: fix interaction of 'replace' and 'recovery'. md/raid10: remove use-after-free bug.
2013-07-26Merge branch 'for-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Assorted libata updates. The most critical one is a fix for ahci oops during boot. Also, a new smallish platform ahci driver is added and sata_inic162x is marked clearly as experimental (it whines during boot too) as data corruption seems rather common on the device and it's unlikely to get any love in the foreseeable future. If the whining doesn't draw any attention, I think we'd probably be better of making the driver depend on BROKEN in a couple releases" This is v2 of this pull request with fixed dependencies for ahci_imx. * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci_imx: depend on CONFIG_MFD_SYSCON ahci_imx: add ahci sata support on imx platforms ARM: imx6q: update the sata bits definitions of gpr13 ahci: fix Null pointer dereference in achi_host_active() libata: make it clear that sata_inic162x is experimental libata: replace strict_strtol() with kstrtol() ata: Fix DVD not dectected at some platform with Wellsburg PCH
2013-07-26Revert "ACPI / video / i915: No ACPI backlight if firmware expects Windows 8"Rafael J. Wysocki
We attempted to address a regression introduced by commit a57f7f9 (ACPICA: Add Windows8/Server2012 string for _OSI method.) after which ACPI video backlight support doesn't work on a number of systems, because the relevant AML methods in the ACPI tables in their BIOSes become useless after the BIOS has been told that the OS is compatible with Windows 8. That problem is tracked by the bug entry at: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Commit 8c5bd7a (ACPI / video / i915: No ACPI backlight if firmware expects Windows 8) introduced for this purpose essentially prevented the ACPI backlight support from being used if the BIOS had been told that the OS was compatible with Windows 8 and the i915 driver was loaded, in which case the backlight would always be handled by i915. Unfortunately, however, that turned out to cause problems with backlight to appear on multiple systems with symptoms indicating that i915 was unable to control the backlight on those systems as expected. For this reason, revert commit 8c5bd7a, but leave the function acpi_video_backlight_quirks() introduced by it, because another commit on top of it uses that function. References: https://lkml.org/lkml/2013/7/21/119 References: https://lkml.org/lkml/2013/7/22/261 References: https://lkml.org/lkml/2013/7/23/429 References: https://lkml.org/lkml/2013/7/23/459 References: https://lkml.org/lkml/2013/7/23/81 References: https://lkml.org/lkml/2013/7/24/27 Reported-and-tested-by: James Hogan <james@albanarts.com> Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com> Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk> Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Reported-by: Kalle Valo <kvalo@adurom.com> Tested-by: Joerg Platte <jplatte@naasa.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-26ahci_imx: depend on CONFIG_MFD_SYSCONTejun Heo
ahci_imx makes use of regmap but the dependency wasn't specified in Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but CONFIG_MFD_SYSCON is not. Add the Kconfig dependency. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-07-26Merge tag 'drm-intel-fixes-2013-07-25' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Brown-paper-bag pull request here. The snb rc6 fix from the last pull broke forcewake BIOS dirt cleanup, which with fixed. But that fix broke the spinlock init sequence, which results in an ugly BUG when spinlock debugging is enabled :( So I get to throw another patch at cc: stable to fix up the mess ... * tag 'drm-intel-fixes-2013-07-25' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: initialize gt_lock early with other spin locks drm/i915: fix hdmi portclock limits
generated by cgit v0.10.2 at 2024-10-08 18:26:29 (GMT)