summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-10-04ptp: Fix resource leak in case of errorChristophe Jaillet
A call to 'ida_simple_remove()' is missing in the error handling path. This as been spotted with the following coccinelle script which tries to detect missing 'ida_simple_remove()' call in error handling paths. /////////////// @@ expression x; identifier l; @@ * x = ida_simple_get(...); ... if (...) { ... } ... if (...) { ... goto l; } ... * l: ... when != ida_simple_remove(...); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04net: qcom/emac: fix return value check in emac_sgmii_config()Wei Yongjun
In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also add check for return value of platform_get_resource(). Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: mvmdio: do not clk_disable_unprepare() NULL clockAlexey Khoroshilov
There is no need to clk_disable_unprepare(dev->clk) before it was initialized. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03mlxsw: spectrum_router: avoid potential uninitialized data usageArnd Bergmann
If fi->fib_nhs is zero, the router interface pointer is uninitialized, as shown by this warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_router_fib_event': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1674:21: error: 'r' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1643:23: note: 'r' was declared here This changes the loop so we handle the case the same way as finding no router interface pointer attached to one of the nexthops to ensure we always trap here instead of using uninitialized data. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net/mlx5e: shut up maybe-uninitialized warningArnd Bergmann
Build-testing this driver with -Wmaybe-uninitialized gives a new false-positive warning that I can't really explain: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'mlx5e_configure_flower': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:509:3: error: 'old_attr' may be used uninitialized in this function [-Werror=maybe-uninitialized] It's obvious from the code that 'old_attr' is initialized whenever 'old' is non-NULL here. The warning appears with all versions I tested from gcc-4.7 through gcc-6.1, and I could not come up with a way to rewrite the function in a more readable way that avoids the warning, so I'm adding another initialization to shut it up. Fixes: 8b32580df1cb ("net/mlx5e: Add TC vlan action for SRIOV offloads") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03cxgb4: unexport cxgb4_dcb_enabledArnd Bergmann
A recent cleanup marked cxgb4_dcb_enabled as 'static', which is correct, but this ignored how the symbol is also exported. In addition, the export can be compiled out when modules are disabled, causing a harmless compiler warning in configurations for which it is not used at all: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:282:12: error: 'cxgb4_dcb_enabled' defined but not used [-Werror=unused-function] This removes the export and moves the function into the correct #ifdef so we only build it when there are users. Fixes: 50935857f878 ("cxgb4: mark symbols static where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: fec: set mac address unconditionallyGavin Schenk
If the mac address origin is not dt, you can only safely assign a mac address after "link up" of the device. If the link is off the clocks are disabled and because of issues assigning registers when clocks are off the new mac address cannot be written in .ndo_set_mac_address() on some soc's. This fix sets the mac address unconditionally in fec_restart(...) and ensures consistency between fec registers and the network layer. Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9638d19e4816 ("net: fec: add netif status check before set mac address") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03net: ethernet: mediatek: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/mediatek/mtk_eth_soc.c:2041:5: warning: no previous prototype for 'mtk_get_link_ksettings' [-Wmissing-prototypes] drivers/net/ethernet/mediatek/mtk_eth_soc.c:2052:5: warning: no previous prototype for 'mtk_set_link_ksettings' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03cxgb4: mark cxgb_setup_tc() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2715:5: warning: no previous prototype for 'cxgb_setup_tc' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix wrong TCP checksums on MTU probing when checksum offloading is disabled, from Douglas Caetano dos Santos. 2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang. 3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(), fix from Lance Richardson. 4) Scheduling while atomic in multicast routing code of ipv4 and ipv6, fix from Nikolay Aleksandrov. 5) Fix packet alignment in fec driver, from Eric Nelson. 6) Fix perf regression in sctp due to struct layout and cache misses, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() act_ife: Fix false encoding act_ife: Fix external mac header on encode VSOCK: Don't dec ack backlog twice for rejected connections Revert "net: ethernet: bcmgenet: use phydev from struct net_device" net: fec: align IP header in hardware net: fec: remove QUIRK_HAS_RACC from i.mx27 net: fec: remove QUIRK_HAS_RACC from i.mx25 ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route ip6_gre: fix flowi6_proto value in ip6gre_xmit_other() tcp: fix a compile error in DBGUNDO() tcp: fix wrong checksum calculation on MTU probing sch_sfb: keep backlog updated with qlen sch_qfq: keep backlog updated with qlen can: dev: fix deadlock reported after bus-off
2016-10-01Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One final fix before 4.8. There was a memory leak triggered by turning scsi mq off due to the fact that we assume on host release that the already running hosts weren't mq based because that's the state of the global flag (even though they were). Fix it by tracking this on a per host host basis" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Avoid that toggling use_blk_mq triggers a memory leak
2016-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "One small change to make joydev (which is used by older games) to bind to devices that export Z axis but not X or Y (such as TRC rudder)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - recognize devices with Z axis as joysticks
2016-09-30mlx5: Add ndo_poll_controller() implementationCalvin Owens
This implements ndo_poll_controller in net_device_ops callbacks for mlx5, which is necessary to use netconsole with this driver. Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Calvin Owens <calvinowens@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30nfp: bpf: zero extend 4 byte context loadsJakub Kicinski
Set upper 32 bits of destination register to zeros after load from the context structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30mlx4: remove unused fieldsDavid Decotigny
This also can address following UBSAN warnings: [ 36.640343] ================================================================================ [ 36.648772] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:857:26 [ 36.656853] shift exponent 64 is too large for 32-bit type 'int' [ 36.663348] ================================================================================ [ 36.671783] ================================================================================ [ 36.680213] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx4/fw.c:861:27 [ 36.688297] shift exponent 35 is too large for 32-bit type 'int' [ 36.694702] ================================================================================ Tested: reboot with UBSAN, no warning. Signed-off-by: David Decotigny <decot@googlers.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge tag 'wireless-drivers-next-for-davem-2016-09-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: wireless-drivers-next patches for 4.9 Major changes: iwlwifi * work for new hardware support continues * dynamic queue allocation stabilization * improvements in the MSIx code * multiqueue support work continues * new firmware version support (API 26) * add 8275 series support * add 9560 series support * add support for MU-MIMO sniffer * add support for RRM by scan * add support for "reverse" rx packet injection faking hw descriptors * migrate to devm memory allocation handling * Remove support for older firmwares (API older than -17 and -22) wl12xx * support booting the same rootfs with both wl12xx and wl18xx hostap * mark the driver as obsolete ath9k * disable RNG by default ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add eeprom opsVivien Didelot
Remove EEPROM flags in favor of new {get,set}_eeprom chip-wide functions in the mv88e6xxx_ops structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add set_switch_mac to opsVivien Didelot
Add a set_switch_mac chip-wide function to mv88e6xxx_ops and remove MV88E6XXX_FLAG_G2_SWITCH_MAC flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add chip-wide opsVivien Didelot
Introduce a mv88e6xxx_ops structure to describe supported chip-wide functions and assign the correct variant to the chip models. For the moment, add only PHY access routines. This allows to get rid of the PHY ops structures and the usage of PHY flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_opsVivien Didelot
The mv88e6xxx_ops is used to describe how to access the chip registers. It can be through SMI (via an MDIO bus), or via another interface such as crafted remote management frames. The correct BUS operations structure is chosen at runtime, depending on the chip address and connectivity. We will need the mv88e6xxx_ops name for future chip-wide operation structure, thus rename mv88e6xxx_ops to more explicit mv88e6xxx_bus_ops. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: rename mv88e6xxx_vtu_stu_entryVivien Didelot
The STU (if the switch has one) is abstracted and accessed through the VTU operations and data registers. Thus rename the mv88e6xxx_vtu_stu_entry struct to mv88e6xxx_vtu_entry. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add mv88e6xxx_num_ports helperVivien Didelot
Add an mv88e6xxx_num_ports helper instead of digging in the chip info structure. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: expose mv88e6xxx_num_databasesVivien Didelot
The mv88e6xxx_num_databases will be used by shared code, so move it inline to the header file. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add flags for FID registersVivien Didelot
Add flags to describe the presence of Global 1 ATU FID register (0x01) and VTU FID register (0x02), instead of checking families. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: abstract REG_GLOBAL2Vivien Didelot
Similarly to the ports, phys, and Global SMI devices, abstract the SMI device address of the Global 2 registers in a few g2 static helpers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30net: dsa: mv88e6xxx: add global1 helpersVivien Didelot
The Global (1) internal SMI device is an extended set of registers containing ATU, PPU, VTU, STU, etc. It is present on every switches, usually at SMI address 0x1B. But old models such as 88E6060 access it at address 0xF, thus using REG_GLOBAL is erroneous. Add a global1_addr info member used by mv88e6xxx_g1_{read,write} and mv88e6xxx_g1_wait helpers in a new global1.c file. This patch finally removes _mv88e6xxx_reg_{read,write}, in favor on the appropriate helpers. No functional changes here. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30Merge tag 'drm-fixes-for-v4.8-final' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "drm fixes for final 4.8. One big regression fix for udl, along with two amdgpu fixes and two nouveau fixes. All seems pretty safe and useful" * tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix line iterator in damage handling drm/radeon/si/dpm: add workaround for for Jet parts drm/amdgpu: disable CRTCs before teardown drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
2016-09-29Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Four fixes for "flush hint" support. Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM Firmware Interface Table) that when written and fenced guarantee that writes pending in platform write buffers (outside the cpu) have been flushed to media. They might also be used by hypervisors as a trigger condition to flush guest-persistent memory ranges to storage. Fix a potential data corruption issue, a broken definition of the hint array, a wrong allocation size for the unit test implementation of the flush hint table, and missing NULL check in an error path. The unit test, while it did not prevent these bugs from being merged, at least triggered occasional crashes in advance of production usages. - Fix handling of ACPI DSM error status results. The DSM mechanism allows communication with platform and memory device firmware. We correctly parse known errors, but were silently ignoring others. Fix it to consistently fail any command with a non-zero status return that we otherwise do not interpret / handle. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, region: fix flush hint table thinko nfit: fail DSMs that return non-zero status by default libnvdimm: fix devm_nvdimm_memremap() error path tools/testing/nvdimm: fix allocation range for mock flush hint tables nvdimm: fix PHYS_PFN/PFN_PHYS mixup
2016-09-29net: qcom/emac: initial ACPI supportTimur Tabi
Add support for reading addresses, interrupts, and _DSD properties from ACPI tables, just like with device tree. The HID for the EMAC device itself is QCOM8070. The internal PHY is represented by a child node with a HID of QCOM8071. The EMAC also has some complex clock initialization requirements that are not represented by this patch. This will be addressed in a future patch. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-29net: qcom/emac: use device_get_mac_addressTimur Tabi
Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-29net: qcom/emac: do not use devm on internal phy pdevTimur Tabi
The platform_device returned by of_find_device_by_node() is not automatically released when the driver unprobes. Therefore, managed calls like devm_ioremap_resource() should not be used. Instead, we manually allocate the resources and then free them on driver release. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Merge tag 'for-linus-20160928' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull late MTD fixes from Brian Norris: "Another round of MTD fixes for v4.8 My apologies for sending this so late. I've been fairly absent as a maintainer this cycle, but I did queue these up weeks ago. In the meantime, Richard was able to handle some other fixes (thanks!) but didn't pick these up. On the bright side, these are very simple changes that should carry little risk. Summary: - Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC - OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused error-handling cases in other configurations/code-paths; this fixes the fix" * tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd: mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed
2016-09-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.9. Major changes: ath9k * disable RNG by default
2016-09-28ath6kl: fix return value in ath6kl_wmi_set_pvb_cmdChaehyun Lim
When building with W=1, we got one warning as belows: drivers/net/wireless/ath/ath6kl/wmi.c:3509:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] At the end of ath6kl_wmi_set_pvb_cmd, it is returned by 0 regardless of return value of ath6kl_wmi_cmd_send. This patch fixes return value from 0 to ret that has result of ath6kl_wmi_cmd_send execution. Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath9k: disable RNG by defaultMiaoqing Pan
ath9k RNG will dominates all the noise sources from the real HW RNG, disable it by default. But we strongly recommand to enable it if the system without HW RNG, especially on embedded systems. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Acked-by: Stephan Mueller <smueller@chronox.de> Acked-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: fix copy engine 5 destination ring stuckRajkumar Manoharan
Firmware is running watchdog timer for tracking copy engine ring index and write index. Whenever both indices are stuck at same location for given duration, watchdog will be trigger to assert target. While updating copy engine destination ring write index, driver ensures that write index will not be same as read index by finding delta between these two indices (CE_RING_DELTA). HTT target to host copy engine (CE5) is special case where ring buffers will be reused and delta check is not applied while updating write index. In rare scenario, whenever CE5 ring is full, both indices will be referring same location and this is causing CE ring stuck issue as explained above. This issue is originally reported on IPQ4019 during long hour stress testing and during veriwave max clients testsuites. The same issue is also observed in other chips as well. Fix this by ensuring that write index is one less than read index which means that full ring is available for receiving data. Cc: stable@vger.kernel.org Tested-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: Ignore SWBA event for a vif if its marked for no beaconMohammed Shafi Shajakhan
Ignore processing further in SWBA event scheduled for a vif, if mac80211 has marked the particular vif for stop beaconing and brought the vdev down in 'ath10k_control_beaconing'. This should potentially avoid ath10k warning/error messages while running continuous wifi down/up with max number of vaps configured. Found this change during code walk through and going through other beacon configuration related functions in ath10k Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28ath10k: fix error return code in ahbWei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in function ath10k_ahb_probe() or ath10k_ahb_resource_init(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-28sh_eth: add R8A7743/5 supportSergei Shtylyov
Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E (also known as R8A7743/5). The Ether core is the same as in the R-Car gen2 SoCs, so will share the code/data with them... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28rocker: use FIB notifications instead of switchdev callsJiri Pirko
Until now, in order to offload a FIB entry to HW we use switchdev op. Use the newly introduced FIB notifier infrasturucture to process FIB entries to offload the in HW. Abort mechanism is now handled within the rocker driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28mlxsw: spectrum_router: Use FIB notifications instead of switchdev callsJiri Pirko
Until now, in order to offload a FIB entry to HW we use switchdev op. However that has limits. Mainly in case we need to make the HW aware of all route prefixes configured in kernel. HW needs to know those in order to properly trap appropriate packets and pass the to kernel to do the forwarding. Abort mechanism is now handled within the mlxsw driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Merge remote-tracking branch 'mkp-scsi/4.8/scsi-fixes' into fixesJames Bottomley
2016-09-28drm/udl: fix line iterator in damage handlingDavid Herrmann
The udl damage handler is supposed to render 'height' lines, but its iterator has an obvious typo that makes it miss most lines if the rectangle does not cover 0/0. Fix the damage handler to correctly render all lines. This is a fallout from: commit e375882406d0cc24030746638592004755ed4ae0 Author: Noralf Trønnes <noralf@tronnes.org> Date: Thu Apr 28 17:18:37 2016 +0200 drm/udl: Use drm_fb_helper deferred_io support Tested-by: poma <poma@gmail.com> Cc: stable@vger.kernel.org # 4.7+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-28igb: restore PPS signal on igb_ptp_resetJacob Keller
When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which resulted in disabling of the PPS signaling. Fix this by recording when the interrupt is on and ensuring that we re-enable it every time we reset. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-28igb: bump version to igb-5.4.0Todd Fujinaka
Bump igb version to match other igb drivers. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-28igbvf: bump version to igbvf-2.4.0Todd Fujinaka
Bump version to match other igbvf drivers. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-28igb: fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning: symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-28Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau: couple of fixes. * 'linux-4.8' of git://github.com/skeggsb/linux: drm/nouveau: Revert "bus: remove cpu_coherent flag" drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
generated by cgit v0.10.2 at 2024-11-08 07:35:11 (GMT)