summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-17phy_device: fix parameter name in kernel-docRandy Dunlap
Fix kernel-doc parameter name in phy_device.c. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17net: fix network drivers ndo_start_xmit() return valuesPatrick McHardy
Fix up remaining drivers returning a magic or an errno value from their ndo_start_xmit() functions that were missed in the first pass: - isdn_net: missed conversion - bpqether: missed conversion: skb is freed, so return NETDEV_TX_OK - hp100: intention appears to be to resubmit skb once resources are available, but due to no queue handling it is dropped for now. - lapbether: skb is freed, so return NETDEV_TX_OK Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17vxge: Enable SRIOV support in the driver.Sivakumar Subramani
- Enabled SRIOV support in the driver. - Call __vxge_hw_verify_pci_e_info() for the PF only. This function verifies the negotiated link width and current link speed in the Link Status Register (offset 12h) which are reserved fields for VFs as per the SRIOV specification, section 3.5.8. - Implemented David Miller's comment to remove the #ifdef CONFIG_PCI_IOV as these intefaces have NOP versions declared when the defintion is not set. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Rastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17sonic: Fix build after ndo_start_xmit() changes.David S. Miller
Noticed by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-06-16sky2: don't look for VPD sizeStephen Hemminger
The code to compute VPD size didn't handle some systems that use chip without VPD. Also some of the newer chips use some additional registers to store the actual size, and wasn't worth putting the additional complexity in, so just remove the code. No big loss since the code to set the VPD size was only a convenience so that utilities would not read the extra space past the end of the available VPD. Move the first PCI config read earlier to detect bad hardware where it returns all ones and refuse loading driver before furthur damage. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15ath9k: process rx packet if we are waiting for CABGabor Juhos
If we are in PS mode, we have to process the received frame if the SC_OP_WAIT_FOR_CAB bit is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: prevent sleeping while we are waiting for CABGabor Juhos
We have to remain awake if the SC_OP_WAIT_FOR_CAB flag is set. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: restore power mode on error pathGabor Juhos
The ath9k_ps_{wakeup,restore} calls must be in balance. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15dell-laptop: fix rfkill conversionJohannes Berg
A polarity error snuck into the rfkill rewrite's dell-laptop conversion, fix it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: port to cfg80211 rfkillJohannes Berg
This ports the ath9k rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. ("With this series a kernel panic, which is a regression, during module unload disappears." -- Vasanthakumar Thiagarajan <vasanth@atheros.com> Other patches in the series: ath9k: Add helper to get ath9k specific current channel ath9k: Make sure we have current channel in ah_curchan before rf disable/enable -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Rodriguez <mcgrof@gmail.com> Tested-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Make sure we have current channel in ah_curchan before rf disable/enableVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath9k: Add helper to get ath9k specific current channelVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15ath5k: fix mesh beaconingNick Kossifidis
This patch is from Nick Kossifidis but he forgot to send it. It ensures that the beacon queue gets started in mesh mode as well, otherwise ath5k will not beacon in mesh point mode. At this time, we still need to issue a scan before mesh beaconing will work but that appears to be a separate problem. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi/iwl3945: fix suspend resume association bugAbhijeet Kolekar
Patch fixes the following bugs at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2005 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=2007 If we suspend with an association and then resumed, we need to synchronize the active rxon with staging rxon, else we will get an error when iwl_alive_start try to commit rxon and staging is set to channel 0. Before going to suspend staging and active rxon are in sync. After resuming from the suspend, iwl_mac_start is called and it clears the staging rxon. Patch fixes the bug by not clearing the staging rxon in iwl_mac_start. Patch also adds similar fix to 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check for channel location for 40MHzWey-Yi Guy
for both mixed and pure 40MHz, need to check for valid channel location. if the specified channel not allow the channel location requested (ABOVE, BELOW), then reject the Fat channel access This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1988 ("iwlwifi: checking for 40MHz mode" and "iwlwifi: check control channel for pure 40MHz" combine with this to address the above bug. -- JWL) Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: check control channel for pure 40MHzWey-Yi Guy
for pure 40MHz mode, set the control channel location if provided, but not like Mixed mode; if information is not provided, still allow 40MHz operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: checking for 40MHz modeWey-Yi Guy
when checking for 40MHz, compare ht_protection to IEEE80211_HT_OP_MODE_PROTECTION_20MHZ. ht_protection is not a bit-mask field Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15iwlwifi: revamp bss_info_changedJohannes Berg
My earlier patch, "mac80211: unify config_interface and bss_info_changed" introduced a bug in iwlwifi where it will do some things incorrectly now when reassociating. Revamp iwl_bss_info_changed to fix that issue and make it easier to read. Also, while at it, add comments about things that it should do but currently doesn't. Finally, also improve the locking in the function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15net/libertas: don't recursive spin lock in if_spi_e2h()Sebastian Andrzej Siewior
|BUG: spinlock recursion on CPU#0, lbs_spi_thread/1030 | lock: dee9a1bc, .magic: dead4ead, .owner: lbs_spi_thread/1030, .owner_cpu: 0 |Call Trace: |[deec3eb0] [c0007220] show_stack+0x4c/0x15c (unreliable) |[deec3ef0] [c0187720] spin_bug+0x9c/0xb0 |[deec3f10] [c0187890] _raw_spin_lock+0x54/0x148 |[deec3f40] [c02d260c] _spin_lock_irqsave+0x2c/0x44 |[deec3f60] [e8671800] lbs_queue_event+0x7c/0x130 [libertas] |[deec3f80] [e8725f04] lbs_spi_thread+0x538/0x58c [libertas_spi] |[deec3fe0] [c004f270] kthread+0x4c/0x88 |[deec3ff0] [c000f33c] kernel_thread+0x4c/0x68 if_spi_e2h() is grabbing ->driver_lock just while calling lbs_queue_event() which is grabbing the same lock. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15libertas: fix IEEE PS mode in GSPI driverAndrey Yurovsky
The card firmware does not set the Command Download Ready interrupt bit when IEEE PS mode is enabled, preventing the driver from sending commands (such as the command to exit IEEE PS mode) since there is no indication that the card is ready to accept commands. This patch works around the problem by using the the TX Download Ready bit in place of the Command Download Ready Bit while in IEEE PS mode. TX Download Ready is set in IEEE PS mode. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15sony: fix rfkill code againJohannes Berg
When the hard state changes, we shouldn't set the soft state to blocked as well -- we have no such indication from the device in that case so leave it untouched. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13458. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTx IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTx IB/mlx4: Add strong ordering to local inval and fast reg work requests IB/ehca: Remove superfluous bitmasks from QP control block RDMA/cxgb3: Limit fast register size based on T3 limitations RDMA/cxgb3: Report correct port state and MTU mlx4_core: Add module parameter for number of MTTs per segment IB/mthca: Add module parameter for number of MTTs per segment RDMA/nes: Fix off-by-one bugs in reset_adapter_ne020() and init_serdes() infiniband: Remove void casts IB/ehca: Increment version number IB/ehca: Remove unnecessary memory operations for userspace queue pairs IB/ehca: Fall back to vmalloc() for big allocations IB/ehca: Replace vmalloc() with kmalloc() for queue allocation
2009-06-14fusion: fix recent kernel-doc problemsRandy Dunlap
Fix recent fusion driver kernel-doc fatal error and warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric.Moore@lsi.com Cc: support@lsi.com Cc: DL-MPTFusionLinux@lsi.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (25 commits) atmel-mci: add MCI2 register definitions atmel-mci: Integrate AT91 specific definition in header file tmio_mmc: allow compilation for ASIC3 mmc_block: do not DMA to stack sdhci: Print ADMA status and pointer on debug tmio_mmc: fix clock setup tmio_mmc: map SD control registers after enabling the MFD cell tmio_mmc: correct probe return value for num_resources != 3 tmio_mmc: don't use set_irq_type tmio_mmc: add bus_shift support MFD,mmc: tmio_mmc: make HCLK configurable mmc_spi: don't use EINVAL for possible transmission errors cb710: more cleanup for the DEBUG case. sdhci: platform driver for SDHCI mxcmmc: remove frequency workaround cb710: handle DEBUG define in Makefile cb710: add missing parenthesis cb710: fix printk format string mmc: Driver for CB710/720 memory card reader (MMC part) pxamci: add regulator support. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix inverted wheel for bluetooth version of apple mighty mouse HID: no more reinitializtion is needed in post_reset HID: hidraw -- fix comment about accepted devices HID: Multitouch support for the N-Trig touchscreen HID: add new multitouch and digitizer contants HID: autocentering support for Logitech Force 3D Pro HID: fix hid-ff drivers so that devices work even without ff support HID: force feedback support for SmartJoy PLUS PS2/USB adapter HID: Wacom Graphire Bluetooth driver HID: autocentering support for Logitech G25 Racing Wheel
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14Merge branches 'cxgb3', 'ehca', 'misc', 'mlx4', 'mthca' and 'nes' into for-linusRoland Dreier
2009-06-14mlx4_core: Don't double-free IRQs when falling back from MSI-X to INTxRoland Dreier
When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. This is the same bug that was reported in ib_mthca by Yinghai Lu <yhlu.kernel@gmail.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-14Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driverMarcel Holtmann
The current build shows a warning with the DTL-1 driver: CC [M] drivers/bluetooth/dtl1_cs.o drivers/bluetooth/dtl1_cs.c: In function ‘dtl1_hci_send_frame’: drivers/bluetooth/dtl1_cs.c:396: warning: ‘nsh.type’ may be used uninitialized in this function Fix this by adding a proper error for unknown packet types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-14Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-14ieee802154: fix kconfig bool/tristate muckupRandy Dunlap
menuconfig IEEE802154_DRIVERS is a bool that depends on tristate IEEE802154. If the IEEE802154 symbol is 'm', the bool becomes 'y'. This allows tristate symbols under IEEE802154_DRIVERS to be configured as 'y' and cause build problems. Changing the menuconfig bool to a tristate fixes this. drivers/built-in.o: In function `fake_scan_req': fakehard.c:(.text+0x46d625): undefined reference to `ieee802154_nl_scan_confirm' drivers/built-in.o: In function `fake_disassoc_req': fakehard.c:(.text+0x46d66f): undefined reference to `ieee802154_nl_disassoc_confirm' drivers/built-in.o: In function `fake_assoc_req': fakehard.c:(.text+0x46d6be): undefined reference to `ieee802154_nl_assoc_confirm' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: initialization reworkStephen Hemminger
Need to rework how bonding devices are initialized to make it more amenable to creating bonding devices via netlink. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: use is_zero_ether_addrStephen Hemminger
Remove bogus non-portable possibly unaligned way of testing for zero addres.. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: network device names are case sensativeStephen Hemminger
The bonding device acts unlike all other Linux network device functions in that it ignores case of device names. The developer must have come from windows! Cleanup the management of names and use standard routines where possible. Flag places where bonding device still doesn't work right with network namespaces. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: elminate bad refcount codeStephen Hemminger
The "expected_refcount" stuff in bonding sysfs module is a mistake. Sysfs does proper refcounting, and it is okay to remove a bond device that has some user process holding the file open. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: fix style issuesStephen Hemminger
Resolve some of the complaints from checkpatch, and remove "magic emacs format" comments, and useless MODULE_SUPPORTED_DEVICE(). But should not change actual code. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: fix destructorStephen Hemminger
It is not safe to use a network device destructor that is a function in the module, since it can be called after module is unloaded if sysfs handle is open. When eventually using netlink, the device cleanup code needs to be done via uninit function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: remove bonding read/write semaphoreStephen Hemminger
The whole read/write semaphore locking can be removed. It doesn't add any protection that isn't already done by using the RTNL mutex properly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: initialize before registrationStephen Hemminger
Avoid a unnecessary carrier state transistion that happens when device is registered. Lockdep works better if initialization is done before registration as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14bonding: bond_create always called with default parametersStephen Hemminger
bond_create() is always called with same parameters so move the argument down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-14Merge branch 'for-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/irda-2.6
2009-06-13IB/mthca: Don't double-free IRQs when falling back from MSI-X to INTxRoland Dreier
When both MSI-X and legacy INTx fail to generate an interrupt, the driver frees the MSI-X interrupts twice. Fix this by clearing the have_irq flag for the MSI-X interrupts when they are freed the first time. Reported-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-13atmel-mci: add MCI2 register definitionsNicolas Ferre
New revision of Atmel MCI interface adds new features. This is a update of register definition in header file. This new MCI IP is called MCI2. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13atmel-mci: Integrate AT91 specific definition in header fileNicolas Ferre
The MCI IP is shared among AVR32 and AT91 SOCs. AT91 has specific bit definitions in the user interface of MCI SD/MMC IP. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13tmio_mmc: allow compilation for ASIC3Philipp Zabel
Now tmio_mmc is able to drive the MMC/SD cell in ASIC3. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13mmc_block: do not DMA to stackBen Dooks
In the write recovery routine, the data to get from the card is allocated from the stack. The DMA mapping documentation says explicitly stack memory is not mappable by any of the DMA calls. Change to using kmalloc() to allocate the memory for the result from the card and then free it once we've finished with the transaction. [ Changed to GFP_KERNEL allocation - Pierre Ossman ] Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13sdhci: Print ADMA status and pointer on debugBen Dooks
If using ADMA, then we should print the ADMA error and current pointer in sdhci_dumpregs() when any debug is requested. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
generated by cgit v0.10.2 at 2024-10-16 14:32:08 (GMT)