summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-04-14stk17ta8: renaming e-mail corrections following split of GE Fanuc joint ventureMartyn Welch
This patch corrects author and copyright notices in the stk17ta8 driver following the split-up of the GE Fanuc joint venture. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Acked-by: Thomas Hommel <thomas.hommel@ge.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-14rtc: e-mail corrections following split of GE Fanuc joint ventureMartyn Welch
This patch corrects author and copyright notices following the split-up of the GE Fanuc joint venture. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-08wd7000: typo spin_unlock_irq() => spin_lock_irq()Dan Carpenter
This was introduced back in 2005 at the very start of the git era by: df0ae2497ddefd72a87f3a3b34ff32455d7d4ae0 [SCSI] allow sleeping in ->eh_host_reset_handler() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-01Remove empty comment in acpi/power.cJustin P. Mattock
Remove an empty comment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29Fix comment and Kconfig typos for 'require' and 'fragment'Gilles Espinasse
Signed-off-by: Gilles Espinasse <g.esp@free.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16Fix typos in commentsThomas Weber
[Ss]ytem => [Ss]ystem udpate => update paramters => parameters orginal => original Signed-off-by: Thomas Weber <swirl@gmx.li> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15powerpc/BSR: fix device_create() return value checkJani Nikula
Use IS_ERR() instead of comparing to NULL. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Several MFD drivers should depend on GENERIC_HARDIRQS mfd: Fix sm501 requested region size
2010-03-13Merge branch 'msm-mmc_sdcc' of ↵Linus Torvalds
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm_sdcc.c: missing brackets in msmsdcc_resume()
2010-03-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/booke: Fix breakpoint/watchpoint one-shot behavior powerpc: Reduce printk from pseries_mach_cpu_die() powerpc: Move checks in pseries_mach_cpu_die() powerpc: Reset kernel stack on cpu online from cede state powerpc: Fix G5 thermal shutdown powerpc/pseries: Pass CPPR value to H_XIRR hcall powerpc/booke: Fix a couple typos in the advanced ptrace code powerpc: Fix SMP build with disabled CPU hotplugging. powerpc: Dynamically allocate pacas powerpc/perf: e500 support powerpc/perf: Build callchain code regardless of hardware event support. powerpc/cpm2: Checkpatch cleanup powerpc/86xx: Renaming following split of GE Fanuc joint venture powerpc/86xx: Convert gef_pic_lock to raw_spinlock powerpc/qe: Convert qe_ic_lock to raw_spinlock powerpc/82xx: Convert pci_pic_lock to raw_spinlock powerpc/85xx: Convert socrates_fpga_pic_lock to raw_spinlock
2010-03-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-13Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-12mxcmmc: fixed max_seg_size value on initializationVladimir Zapolskiy
This unpleasant typo appeared while porting the driver from Freescale original sources, where anyone can easily find the correct version. Current incorrect version potentially can influence segment and merge handling in block subsystem via MMC request queue settings. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pierre Ossman <pierre@ossman.eu> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12sgi-gru: use for_each_set_bit()Akinobu Mita
Replace open-coded loop with for_each_set_bit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/char/mmtimer.c: eliminate useless codeJulia Lawall
The variable x is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Stefan observed: The next x = rb_entry(mn->next, struct mmtimer, list); is preceded by a test whether mn->next is NULL. Unless that test is redundant too, your patch fixes a potential NULL pointer dereference, introduced by commit cbacdd95 "SGI Altix mmtimer: allow larger number of timers per node" in 2.6.26. Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12w1: mxc_w1: move probe() and remove() to the dev* text areaAlberto Panizzo
This fixes the section mismatch warning for mxc_w1_probe() Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12w1: fix test in ds2482_wait_1wire_idle()Roel Kluin
With `while (++retries < DS2482_WAIT_IDLE_TIMEOUT)' retries reaches DS2482_WAIT_IDLE_TIMEOUT after the loop Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12serial amba-pl010: enable PPS supportRodolfo Giometti
Function pl010_enable_ms() is automagically called when PPS ldisc is selected. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12serial 8250: enable PPS supportRodolfo Giometti
Automagically function serial8250_enable_ms() is called when PPS ldisc is selected. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12pps: serial clients supportRodolfo Giometti
Adds support, by using the PPS line discipline, for the PPS sources connected with the CD (Carrier Detect) pin of a serial port. [akpm@linux-foundation.org: fix cast size warnings] Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12ldisc n_tty: add new method n_tty_inherit_ops()Rodolfo Giometti
This new method can be used to init a new struct tty_ldisc_ops as the default tty_ldisc_N_TTY struct. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12pps: LinuxPPS clients supportRodolfo Giometti
Each PPS source can be registered/deregistered into the system by using special modules called "clients". They simply define the PPS sources' attributes and implement the time signal registration mechanism. This patch adds a special directory for such clients and adds a dummy client that can be useful to test system integrity on real systems. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12dma-mapping: pci: move pci_set_dma_mask and pci_set_consistent_dma_mask to ↵FUJITA Tomonori
pci-dma-compat.h We can use pci-dma-compat.h to implement pci_set_dma_mask and pci_set_consistent_dma_mask as we do with the other PCI DMA API. We can remove HAVE_ARCH_PCI_SET_DMA_MASK too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12dma-mapping: dma-mapping.h: add dma_set_coherent_maskFUJITA Tomonori
dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask. This is necessary to move to the generic device model DMA API from the PCI bus specific API in the long term. dma_set_coherent_mask works in the exact same way that pci_set_consistent_dma_mask does. So this patch also changes pci_set_consistent_dma_mask to call dma_set_coherent_mask. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12dma-mapping: pci: convert pci_set_dma_mask to call dma_set_maskFUJITA Tomonori
This changes pci_set_dma_mask to call the generic DMA API, dma_set_mask. pci_set_dma_mask (in drivers/pci/pci.c) does the same things that dma_set_mask does on all the architectures that use pci_set_dma_mask; calls dma_supprted and sets dev->dma_mask. So we safely change pci_set_dma_mask to simply call dma_set_mask. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@suse.de> Cc: David S. Miller <davem@davemloft.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: e752x: add dram scrubbing supportPeter Tyser
Add support to scrub DRAM using the e752x integrated memory scrubbing engine. The e7320/7520/e7525 chipsets support scrubbing at one rate while the i3100 chipset supports a normal and fast rate. A similar patch was originally sent back in 2008: http://sourceforge.net/mailarchive/forum.php?thread_name=1204835866.25206.70.camel@localhost.localdomain&forum_name=bluesmoke-devel This version has the following updates: - Use 16-bit PCI config cycles to access MCHSCRB register e7320/7520/e7525 docs say register is 16bits wide, i3100 says 8. I tested 16bits on the i3100 to be safe. - Recalcuate and round actual scrub rates The changes have been tested on an i3100-based board. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: e752x fsb eccKonstantin Olifer
FSB parity is only supported on the Xeon processor. Previously it was incorrectly enabled for the Celeron as well. Signed-off-by: Konstantin Olifer <kolifer@gmail.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx use resource_size instead of raw mathH Hartley Sweeten
Use resource_size() instead of arithmetic. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Acked-by: Dave Jiang <djiang@mvista.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx improve SDRAM error reportingPeter Tyser
Add the ability to detect the specific data line or ECC line which failed when printing out SDRAM single-bit errors. An example of a single-bit SDRAM ECC error is below: EDAC MPC85xx MC1: Err Detect Register: 0x80000004 EDAC MPC85xx MC1: Faulty data bit: 59 EDAC MPC85xx MC1: Expected Data / ECC: 0x7f80d000_409effa0 / 0x6d EDAC MPC85xx MC1: Captured Data / ECC: 0x7780d000_409effa0 / 0x6d EDAC MPC85xx MC1: Err addr: 0x00031ca0 EDAC MPC85xx MC1: PFN: 0x00000031 Knowning which specific data or ECC line caused an error can be useful in tracking down hardware issues such as improperly terminated signals, loose pins, etc. Note that this feature is only currently enabled for 64-bit wide data buses, 32-bit wide bus support should be added. I don't have any 32-bit wide systems to test on. If someone has one and is willing to give this patch a shot with the check for a 64-bit data bus removed it would be much appreciated and I can re-submit with both 32 and 64 bit buses supported. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Dave Jiang <djiang@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx mask ecc syndrome correctlyPeter Tyser
With a 64-bit wide data bus only the lowest 8-bits of the ECC syndrome are relevant. With a 32-bit wide data bus only the lowest 16-bits are relevant on most architectures. Without this change, the ECC syndrome displayed can be mildly confusing, eg: EDAC MPC85xx MC1: syndrome: 0x25252525 When in reality the ECC syndrome is 0x25. A variety of Freescale manuals say a variety of different things about how to decode the CAPTURE_ECC (syndrome) register. I don't have a system with a 32-bit bus to test on, but I believe the change is correct. It'd be good to get an ACK from someone at Freescale about this change though. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Dave Jiang <djiang@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12ipmi: fix slave_addrs setting to actually workBela Lubkin
Actually use the slave_addrs module parameter if it is specified, and make things consistent about passing zero in for the slave address for the default. Signed-off-by: Bela Lubkin <blubkin@vmware.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12ipmi: add parameter to limit CPU usage in kipmidMartin Wilck
In some cases kipmid can use a lot of CPU. This adds a way to tune the CPU used by kipmid to help in those cases. By setting kipmid_max_busy_us to a value between 100 and 500, it is possible to bring down kipmid CPU load to practically 0 without loosing too much ipmi throughput performance. Not setting the value, or setting the value to zero, operation is unaffected. Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12copy_signal() cleanup: clean tty_audit_fork()Veaceslav Falico
Remove unneeded initialization in tty_audit_fork(). It is called only via copy_signal() and is useless after the kmem_cache_zalloc() was used. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/char/mem.c: cleanupsAndrew Morton
- fix switch statement layout - fix whitespace stuff - fix comment layout - remove unneeded inlining - use __weak - remove trailing whitespace - move uncached_access() inside `#ifndef __HAVE_PHYS_MEM_ACCESS_PROT' - it is otherwise unused. Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12/dev/mem: dont allow seek to last pageWu Fengguang
So as to return a uniform error -EOVERFLOW instead of a random one: # kmem-seek 0xfffffffffffffff0 seek /dev/kmem: Device or resource busy # kmem-seek 0xfffffffffffffff1 seek /dev/kmem: Block device required Suggested by OGAWA Hirofumi. Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12fbdev: bfin-lq035q1-fb: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/video/bfin-lq035q1-fb.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12video: fix first line of kernel-doc for a few functionsBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12obsolete config in kernel source: LWMON5Christoph Egger
There was some conditionalizing for the LWMON5 boards in kernel source. However infrastructure for enabling this isn't here so probably the special case code can go as well. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Acked-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/video/via: fix continuation line formatsJoe Perches
String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12NUC900 LCD Controller DriverWang Qiang
An LCD controller driver for nuc900s. The Linux LOGO is just fine and the FB-Test application was ok, too. Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Cc: Wang Zongshun <mcuos.com@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12fbdev: remove obsolete CONFIG_FB_SOFT_CURSORChristoph Egger
The config Option FB_SOFT_BUFFER was removed in c465e05a03209651078b95686158648fd7ed84c5 ("fbcon/fbdev: Move softcursor out of fbdev to fbcon"). While moving to fbcon this single driver has it left as a select in KConfig / #ifdef in source. This last occurence is removed here so the option is really gone Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12broadsheetfb: support storing waveformJaya Kumar
This patch adds waveform storing capability to broadsheetfb. It uses the firmware class to retrieve the waveform, and the request to initiate the waveform storing is done via a driver sysfs entry, loadstore_waveform. Broadsheet is a framebuffer device. It is slightly different from a typical framebuffer controller that drives a normal TFT-LCD display. Most E-Ink display panels require a waveform in order to function. That is, in order to drive the state of a pixel to black, gray, or white, a specific waveform is utilized. Basically, that waveform represents the specific E-field wiggling needed to get the pixel to its optimal state given current temperature, and its previous state. TN/IPS-LCDs use a similar concept but the driving waveform is sufficiently simple that it is internalized in the TFT source/gate driver. These E-Ink waveforms are specific to a production batch. That is, a batch of display films are produced, then they get characterized and a waveform is generated for that batch. Broadsheet, typically, is attached to its private SPI flash which is then flashed with this waveform. Users won't be able to see the waveform and typically won't ever need to know about it. If however, the display panel attached to broadsheet is changed out, then they will need to update their waveform. That would typically be done at a factory or repair facility rather than by a user. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12broadsheetfb: add MMIO hooksJaya Kumar
Allow boards with GP-MMIO controllers to provide hooks to broadsheetfb in order to offload cmd/data writes and data reads instead of relying only on host based GPIO wiggling. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: support color depth 15 and 30Florian Tobias Schandinat
Add support for the color depth 15 on IGA1 and 30 on IGA1 and IGA2. To allow the usage of those the driver now refuses color depth that are totally off and otherwise the selection in viafb_check_var is used. Therefore the first call to this for the first framebuffer was delayed a bit. It only enables the new formats if they are requested exactly (viafb_bpp=15|30). As this is a new feature, no regressions are expected. The color depth 15 was successfully tested. Didn't get anything usable for 30 but that might be the programs fault. I would like to get some feedback whether it works as expected or not if somebody knows a program/configuration where it should. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: rework color settingFlorian Tobias Schandinat
This is a rewritten version of viafb_setcolreg. The hardware register writes were split up and moved to hw.c where they belong as this is really low level stuff. It was made dual fb aware. Furthermore viafb_setcmap was removed as the problem with 8bpp originated from a bug in writing multiple color registers at once. The removal of viafb_setcmap might introduce a small performance regression but its certainly better to receive the correct result a bit slower than a garbled picture fast. It should give us a working 8bpp mode and is more extensible than the old hardcoded code. No other regressions are expected but as the hardware might be a bit picky it might cause some regressions in 8bpp mode on some hardware although I doubt that. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: some virtual_xres handling fixesFlorian Tobias Schandinat
Do not require the virtual_xres to be aligned as line length is for such purposes. Calculate always the smallest line length required. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: rework color checkingFlorian Tobias Schandinat
Make color checking a bit more tolerant in what values it allows and more fine grained to later support 15 and 30 bits formats. It splits the filling of the color information in var to a seperate function and sets some color related values in var that where previously untouched. This could be a bug fix but at least I don't know any applications that was fooled by not correctly setting the fields in var. At least no regressions are expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: make some variables a bit less globalFlorian Tobias Schandinat
Move some variables closer to their usage. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: remove dead code due to IGA1_IGA2Florian Tobias Schandinat
Some code depended on IGA1_IGA2 which was never set (at least with the symbolic name). Remove this dead code although it might one day be useful to get a hint on how some things might work. However as this is dead it is likely full of bugs and would prevent a clean structure (as it has some very strange things). Dead code -> no regressions, at least if VIA doesn't do anything very ugly. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12viafb: split color mode setting upFlorian Tobias Schandinat
This patch splits color mode setting up in seperate functions. Some hardware initialization that was previously mixed with it is moved to viafb_setmode. As are the calls to the newly created function. This is yet another little step towards controlling each IGA on its own. As this patch really aims too mimic the old behaviour no regressions are expected. However I noticed that 8bpp (or 6bpp?) seems actually a bit broken before and after the patch. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>