| Age | Commit message (Collapse) | Author |
|---|
|
We incorrectly assumed that dpaa2_io_release() can only
return -EBUSY as an error code, when in fact it can also
fail in case some of its arguments don't have valid values.
Make sure we only retry the operation while the portal is
busy and abort for all other error cases, otherwise we risk
entering an endless loop.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Integrated-by: Guanhua Gao <guanhua.gao@nxp.com>
|
|
Commit 42a1431068088 in the LSDK 4.9 kernel("usb: host: Add support
to add/remove usb host driver") introduced the compilation error. We fix it now.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
As per USB specification, in the Suspend state, the status bit does
not change until the port is suspended. However, there may be a delay
in suspending a port if there is a transaction currently in progress
on the bus.
In the USBDR controller, the PORTSCx[SUSP] bit changes immediately when
the application sets it and not when the port is actually suspended
Workaround for this issue involves waiting for a minimum of 10ms to
allow the controller to go into SUSPEND state before proceeding ahead
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Change-Id: I8d20619d7d62afc12981c2f913c3d3ec735f7e64
Reviewed-on: http://git.am.freescale.net:8181/3996
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Aggrwal Poonam-B10812 <Poonam.Aggrwal@freescale.com>
Reviewed-by: Rivera Jose-B46482 <Jose.G.Rivera@freescale.com>
|
|
Commit f44116ae8818 ("PCI: Remove pci_find_parent_resource() use for
allocation") updated the logic that iterates over all bus resources and
compares them to a given resource, in order to decide whether one is the
parent of the latter.
This change inadvertently causes pci_find_parent_resource() to disregard
resources starting at address 0x0, resulting in an error such as the one
below on ARM systems whose I/O window starts at 0x0.
pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff window]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff window]
pci_bus 0000:00: root bus resource [bus 00-0f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: can't claim BAR 13 [io 0x0000-0x0fff]: no compatible bridge window
pci 0000:03:01.0: can't claim BAR 0 [io 0x0000-0x001f]: no compatible bridge window
While this never happens on x86, it is perfectly legal in general for a PCI
MMIO or IO window to start at address 0x0, and it was supported in the code
before commit f44116ae8818.
Drop the test for res->start != 0; resource_contains() already checks
whether [start, end) completely covers the resource, and so it should be
redundant.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Fix compiling errors for backporting dash-lts.
Signed-off-by: Guanhua Gao <guanhua.gao>
|
|
The dpaa2-eth PFC configuration is kept in a private driver variable.
When getting PFC configuration via ieee_getpfc, get it straight from the
Management Complex based on the Rx congestion notification setup.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
Implement the following:
- Enable PFC in DPNI options.
- Set queue taildrops for priorities (traffic classes) that are not PFC
enabled (pause frames are not sent in case of congestion). Since the
buffer pool is shared, we can't risk other traffic to consume all
available buffers.
- Configure Rx congestion notifications for PFC enabled priorities.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
With the introduction of PFC support, there are multiple ways taildrop
is configured, based on the DPNI pause frame configuration:
- no pause frames - per-queue taildrop thresholds.
- pause frames - no taildrop thresholds (pause frames sent based on
buffer depletion).
- PFC pause frames - per-group (traffic class) taildrop thresholds for
non-PFC enabled priorities (pause frames sent based on Rx congestion
notifications).
Refactor the fq taildrop setup area.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
Configure static ingress classification based on VLAN PCP, required by
PFC.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
Add initial DCB ops in the DPAA2 Ethernet driver. Currently they are
dummy calls.
Tested integration with userspace lldpad:
- lldpad daemon running
- bring interface up
- lldptool -L -i niX adminStatus=rxtx
- lldptool -T -i niX -V PFC -c enabled={prio comma separated list}
- lldptool -t -i niX -V PFC -c enabled
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
The v2 dpni_set_pools command format allows sending an additional
parameter, the priority mask for the buffer pool. This can be used to
configure multiple buffer pools for the same dpni, to serve different
priorities.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
The current MC (10.3.1) design uses a separate flow steering table for
each traffic class. When adding a flow steering rule, add it for each
traffic class. The location of the rule is the same in all tables.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
The driver only handles frame workqueues associated with traffic class
0. Add support for multiple traffic classes for the same flowid, based
on the tc field in the fq struct, and the num_tcs parameter in the dpni
atttributes. Create a separate fq for each tc x flowid. Display the
information in debugfs.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
|
|
In SDHC high speed AC timing, the tshivkh parameter
is defined as input setup times:SDHC_CMD, SDHC_DATx,
to SDHC_CLK. The value of the tshivkh should be 2.5 ns
considering the round trip delay, board/data skew.
However, because of this erratum, it needs
at least 4.1 ns.
eSDHC cannot run at the maximum clock speed for the
high speed mode, or there is a limit on the length
of the trace on the board for data, command, and
clock lines of the SDHC.
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
The bit eSDHC_TBCTL[TB_EN] couldn't be reset by eSDHC_SYSCTL[RSTA] which is
used to reset for all. The driver should make sure it's cleared before card
initialization, otherwise the initialization would fail.
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
[modify to adapt to 4.9, pcie have member pp instead of pci]
By default, when the PCIe controller experiences an erroneous completion
from an external completer for its outbound non-posted request, it sends
an OKAY response to the device's internal AXI slave system interface.
However, this default system error response behavior cannot be used for
other types of outbound non-posted requests. For example, the outbound
memory read transaction requires an actual ERROR response, like UR
completion or completion timeout.
Fix this by forwarding the error response of the non-posted request.
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
[context adjustment]
The Freescale PCIe controller advertises the MSI/MSI-X capability in both
RC and Endpoint mode, but in RC mode it doesn't support MSI/MSI-X by
itself; it can only transfer MSI/MSI-X from downstream devices.
Add a quirk to prevent use of MSI/MSI-X in RC mode.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Minghuan Lian <minghuan.Lian@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Add DKP support for tls using caam/qi2 as backend.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Add DKP support for tls using caam/qi as backend.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Add support for unkeyed and keyed (hmac) md5, sha algorithms.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Add DKP support for authenc algorithms using caam/qi2 as backend.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Upcoming caam/qi2 driver will support ahash algorithms,
thus move ahash descriptors generation in a shared location.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Offload split key generation in CAAM engine, using DKP.
DKP is supported starting with Era 6.
Note that the way assoclen is transmitted from the job descriptor
to the shared descriptor changes - DPOVRD register is used instead
of MATH3 (where available), since DKP protocol thrashes the MATH
registers.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
Save Era in driver's private data for further usage,
like deciding whether an erratum applies or a feature is available
based on its value.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
|
|
ctx_map_to_sec4_sg() function, added in
commit 045e36780f115 ("crypto: caam - ahash hmac support")
has never used the "desc" parameter, so let's drop it.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit dfcd8393efefb7a111f9cb6af69058ecaf4a4d72)
|
|
Extended descriptor allocation has been changed by
commit dde20ae9d6383 ("crypto: caam - Change kmalloc to kzalloc to avoid residual data")
to provide zeroized memory, meaning we no longer have to sanitize
its members - edesc->src_nents and edesc->dst_dma.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit f2ac67746534fab0cbc0bc29bfc3e507b1f58474)
|
|
|
|
Work for Congestion State Notifications (CSCN) and Message Ring (MR)
handling is handled via the workqueue mechanism. This requires the
driver to disable those IRQs before scheduling the work and re-enabling
it once the work is completed so that the interrupt doesn't continually
fire.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
[Stuart: changed to use ARCH_LAYERSCAPE]
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Unlike PPC builds, ARM builds need following headers
explicitly:
+#include <linux/io.h> for ioread32be()
+#include <linux/delay.h> for udelay()
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Add revision 3.2 of the QBMan block. This is the version
for LS1043A and LS1046A SoCs.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Rework ioremap() for PPC and ARM. The PPC devices require a
non-coherent mapping while ARM will work with a non-cachable/write
combine mapping.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
The Kconfig symbol for 32bit ARM is 'ARM', not 'ARM32'.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Not relevant and arch dependent. Overkill for PPC.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Replace PPC specific set/clear_bits API with standard
bit twiddling so driver is portalable outside PPC.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Use the shared-memory-pool mechanism for frame queue descriptor and
packed frame descriptor record area allocations.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Use the shared-memory-pool mechanism for free buffer proxy record
area allocation.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
|
|
Export qman_query_fq_np() function and related structures.
This will be needed in the caam/qi driver, where "queue empty"
condition will be decided based on the frm_cnt.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add and export the ID of the channel serviced by the
CAAM (Cryptographic Acceleration and Assurance Module) DCP.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since qman_volatile_dequeue() is already exported, move the related
structures into the public header too.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Use resource_size function on resource object
instead of explicit computation.
Generated by: scripts/coccinelle/api/resource_size.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: rt@linutronix.de
Cc: Roy Pledge <roy.pledge@nxp.com>
Link: http://lkml.kernel.org/r/20161126231350.10321-21-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <oss@buserror.net>
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: rt@linutronix.de
Cc: Roy Pledge <roy.pledge@nxp.com>
Link: http://lkml.kernel.org/r/20161126231350.10321-20-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The hardware descriptors have big endian (BE) format.
Provide proper endianness handling for the remaining
descriptor fields, to ensure they are correctly
accessed by non-BE CPUs too.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
There are multiple occurences of both contextB and context_b
in different h/w descriptors, referring to the same descriptor
field known as "Context B". Stick with the "context_b" naming,
for obvious reasons including consistency (see also context_a).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
|
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
|
