| Age | Commit message (Collapse) | Author |
|---|
|
commit e2a33c34ddff22ee208d80abdd12b88a98d6cb60 upstream.
The RZ/A1 is different than the other Renesas SOCs because the MSTP
registers are 8-bit instead of 32-bit and if you try writing values as
32-bit nothing happens...meaning this driver never worked for r7s72100.
Fixes: b6face404f38 ("ARM: shmobile: r7s72100: add essential clock nodes to dtsi")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bae203d58b7dce89664071b3fafe20cedaa3e4f6 upstream.
Function mx31_clocks_init() is called during clock intialization on
legacy boards with reference clock frequency passed as its input
argument, this can be verified by examination of the function
declaration found in arch/arm/mach-imx/common.h and actual function
users which include that header file.
Inside CCF driver the function ignores its input argument, by chance
the used value in the function body is the same as input arguments on
side of all callers.
Fixes: d9388c843237 ("clk: imx31: Do not call mxc_timer_init twice when booting with DT")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0f6f9302b819ca352cfd4f42c18ec08d521f9cae upstream.
The audio module clocks are supposed to be set according to the sample
rate of the audio stream. The audio PLL provides the clock signal for
these module clocks, and only it is freely tunable.
Set CLK_SET_RATE_PARENT for the audio module clocks so their users can
properly tune the clock rate.
Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 937ff9ded8b6ebe8963ade55bdd77a61ded88075 upstream.
The audio module clocks are supposed to be set according to the sample
rate of the audio stream. The audio PLL provides the clock signal for
these module clocks, and only it is freely tunable.
Set CLK_SET_RATE_PARENT for the audio module clocks so their users can
properly tune the clock rate.
Fixes: 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
message
commit f8d17344a60921c2387759fc0a85aa64299d1ec6 upstream.
Prevent creating clk alias for non existing gmac_gmii_ref_clk_div clock and,
this way, eliminate excessive error message during boot:
"ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div"
Fixes: c097338ebd3f ("ARM: dts: dra7: cpsw: fix clocks tree")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 20979202ee6e4c68dab7bcf408787225a656d18e upstream.
Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function
wm831x_clkout_is_prepared() returns "true" when it fails to read
CLOCK_CONTROL_1. "true" means the device is already prepared. So
return "true" on the read failure seems improper.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Fixes: f05259a6ffa4 ("clk: wm831x: Add initial WM831x clock driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbf2e548ca8ad4bb274d014e9a70bd841d29948e upstream.
The clocks on these boards run at 25 MHz, not 19.2 and 27 like
other platforms. Unfortunately I copy/pasted from other similar
SoCs but forgot this one is different. Fix it.
Fixes: a085f877a882 ("clk: qcom: Move cxo/pxo/xo into dt files")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 792f497b22afd0563b94dd8fa129a05f762a2c25 upstream.
We should unlock before returning on this error path.
Fixes: 3a762dbd5347 ('[media] Input: synaptics-rmi4 - add support for F54 diagnostics')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9572fdd13e299cfba03abbfd2786c84ac055249 upstream.
Since commit commit eb1c8f4325d5 ("hwmon: (lm90) Convert to use new hwmon
registration API") the temp1_max_alarm and temp1_crit_alarm attributes are
mapped to the same alarm bit. Fix the typo.
Fixes: eb1c8f4325d5 ("hwmon: (lm90) Convert to use new hwmon registration API")
Signed-off-by: Micehael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4fccd4a1e8944033bcd7693ea4e8fb478cd2059a upstream.
Fix overflows seen when writing into fan speed limit attributes.
Also fix crash due to division by zero, seen when certain very
large values (such as 2147483648, or 0x80000000) are written
into fan speed limit attributes.
Fixes: 594fbe713bf60 ("Add support for GMT G762/G763 PWM fan controllers")
Cc: Arnaud Ebalard <arno@natisbad.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d04e9112ad59d73f23f3b0f6726c5e798dfcbf upstream.
Fix overflows seen when writing voltage and temperature limit attributes.
The value passed to DIV_ROUND_CLOSEST() needs to be clamped, and the
value parameter passed to nct7802_write_fan_min() is an unsigned long.
Also, writing values larger than 2700000 into a fan limit attribute results
in writing 0 into the chip's limit registers. The exact behavior when
writing this value is unspecified. For consistency, report a limit of
1350000 if the chip register reads 0. This may be wrong, and the chip
behavior should be verified with the actual chip, but it is better than
reporting a value of 0 (which, when written, results in writing a value
of 0x1fff into the chip register).
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e36ce99ee0815d7919a7b589bfb66f3de50b6bc7 upstream.
Module test reports:
temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]
This is seen because the values passed when writing temperature limits
are unbound.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4538bfbf2d9f1fc48c07ac0cc0ee58716fe7fe96 upstream.
Converts the unsigned temperature values from the i2c read
to be sign extended as defined in the datasheet so that
negative temperatures are properly read.
Fixes: 28e6274d8fa67 ("hwmon: (amc6821) Avoid forward declaration")
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[groeck: Dropped unnecessary continuation line]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13edb767aa609b6efb7c0c2b57fbd72a6ded0eed upstream.
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
$
After this patch:
$ modinfo drivers/hwmon/scpi-hwmon.ko | grep alias
alias: of:N*T*Carm,scpi-sensorsC*
alias: of:N*T*Carm,scpi-sensors
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Fixes: ea98b29a05e9c ("hwmon: Support sensors exported via ARM SCP interface")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
callbacks
commit a608a9d52fa4168efd478d684039ed545a69dbcd upstream.
All LED-setting functions in fujitsu-laptop are currently assigned to
the brightness_set callback, which is incorrect because they can sleep
(due to their use of call_fext_func(), which in turn issues ACPI calls)
and the documentation (in include/linux/leds.h) clearly states they must
not. Assign them to brightness_set_blocking instead and change them to
match the expected function prototype.
This change makes it possible to use Fujitsu-specific LEDs with "heavy"
triggers, like disk-activity or phy0rx.
Fixes: 3a407086090b ("fujitsu-laptop: Add BL power, LED control and radio state information")
Fixes: 4f62568c1fcf ("fujitsu-laptop: Support radio LED")
Fixes: d6b88f64b0d4 ("fujitsu-laptop: Add support for eco LED")
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc4725d9029e2c8205fbaf1105e193d1c4e463bb upstream.
The intention was to enable the checks if debugging is enabled, not
disabled.
Fixes: f793d1e51705b276 ("clk: shmobile: Add new CPG/MSSR driver core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a75dcb5848359f488c32c0aef8711d9bd37a77b8 upstream.
We should return -ENOMEM here, instead of success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables")
Link: http://lkml.kernel.org/r/20161018143318.15673-9-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31b239824ece321c09bdb8e61e1d14814eaba38b upstream.
The word "background" contains 10 characters so the third argument of
strncmp() need to be 10 in order to match this prefix correctly.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: 855aed1220d2 ("ath10k: add spectral scan feature")
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40a50f8b307de8d08f3fa37c312fc16a7dd233e5 upstream.
TPS65217 IRQ domain should be removed and initialised as NULL when the
module is unloaded for the next use. When tps65217.ko is loaded again,
it causes the page fault. This patch fixes the error below.
root@arm:~# lsmod | grep "tps"
tps65217_charger 3538 0
tps65218_pwrbutton 2974 0
tps65217 6710 1 tps65217_charger
root@arm:~# modprobe -r tps65217_charger
root@arm:~# modprobe tps65217.ko
[ 71.990277] Unable to handle kernel paging request at virtual address bf055944
[ 71.998063] pgd = dd3a4000
[ 72.000904] [bf055944] *pgd=9e6f7811, *pte=00000000, *ppte=00000000
[ 72.007567] Internal error: Oops: 7 [#1] SMP ARM
[ 72.012404] Modules linked in: tps65217(+) evdev musb_dsps musb_hdrc udc_core tps65218_pwrbutton usbcore phy_am335]
[ 72.055700] CPU: 0 PID: 243 Comm: modprobe Not tainted 4.9.0-rc5-next-20161114 #3
[ 72.063531] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 72.069899] task: de714380 task.stack: de7e6000
[ 72.074655] PC is at irq_find_matching_fwspec+0x88/0x100
[ 72.080211] LR is at 0xde7e79d8
[ 72.083496] pc : [<c01a5d88>] lr : [<de7e79d8>] psr: 200e0013
[ 72.083496] sp : de7e7a78 ip : 00000000 fp : dd138a68
[ 72.095506] r10: c0ca04f8 r9 : 00000018 r8 : de7e7ab8
[ 72.100973] r7 : 00000001 r6 : c0c4517c r5 : df963f68 r4 : de321980
[ 72.107797] r3 : bf055940 r2 : de714380 r1 : 00000000 r0 : 00000000
[ 72.114633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 72.122084] Control: 10c5387d Table: 9d3a4019 DAC: 00000051
[ 72.128097] Process modprobe (pid: 243, stack limit = 0xde7e6218)
[ 72.134489] Stack: (0xde7e7a78 to 0xde7e8000)
[ 72.139060] 7a60: df963f68 de7e7ab8
[ 72.147643] 7a80: 00000000 dd0e1000 dd491e20 c01a6ea0 600e0013 c01a5dc0 dd138a68 c0c45138
[ 72.156216] 7aa0: df963f68 00000000 df963f68 dd0e1010 00000000 c01a71a4 df963f68 00000001
[ 72.164800] 7ac0: 00000002 de7e7ac0 c80048b8 dd0adf00 df963f68 c0c4517c 00000000 de7e7b50
[ 72.173369] 7ae0: 00000018 c0ca04f8 dd138a68 c01a5dc0 df963f68 dd0e1010 00000000 dd0e1000
[ 72.181942] 7b00: dd491e20 c0653a70 df963f58 00000001 00000002 00000000 00000000 00000000
[ 72.190522] 7b20: 600e0093 c0cbf8f0 c0c0512c c0193674 00000001 00000080 00000000 c0554984
[ 72.199096] 7b40: 00000000 00000000 800e0013 c0553858 df963f68 00000000 00000000 00000000
[ 72.207674] 7b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 72.216239] 7b80: 00000000 00000000 00000000 00000000 00000000 00000000 dd0e1000 c0544d24
[ 72.224816] 7ba0: dd491e10 dd0e1010 dd16e800 bf1d517c bf1d5620 dd0e1010 c1497ed4 bf1d5620
[ 72.233398] 7bc0: dd0e1010 fffffdfb bf1d5620 bf1d5620 00000000 c054537c c0545330 dd0e1010
[ 72.241967] 7be0: c1497ed4 00000000 bf1d5620 c05433ac 00000000 00000000 de7e7c28 c0543570
[ 72.250537] 7c00: 00000001 c1497e90 00000000 c0541884 de080cd4 dd44b7d4 dd0e1010 dd0e1010
[ 72.259109] 7c20: dd0e1044 c05430c8 dd0e1010 00000001 dd0e1010 dd0e1018 dd0e1010 c0c9e328
[ 72.267676] 7c40: de5d4020 c0542760 dd0e1018 dd0e1010 00000000 c0540ba8 dd138a40 c048dec4
[ 72.276253] 7c60: 00000000 dd0e1000 00000001 dd0e1000 dd0e1010 dd0e1000 bf233de0 dd138a40
[ 72.284829] 7c80: dd0e1010 c05450a0 000000bf 00000000 dd138a60 00000001 dd0e1000 c0571240
[ 72.293398] 7ca0: 00000000 dd1ce9c0 00000040 dd1ce9cc bf233de0 00000003 de5d4020 ffffffff
[ 72.301969] 7cc0: 00000004 dd0adf00 00000000 c0571408 00000000 00000000 dd0adf00 de5d4020
[ 72.310543] 7ce0: c057146c dd1ce9c0 bf233d14 de5d4020 de7fb3d0 00000004 bf233d14 ffffffff
[ 72.319120] 7d00: 00000018 dd49bf30 c01cedc0 c05714d0 00000000 00000000 dd0adf00 de322810
[ 72.327692] 7d20: de322810 00000000 dd033000 000000f0 00000001 bf2333fc 00000000 00000000
[ 72.336269] 7d40: dd0adf00 de5d4020 000000b6 bf233e40 de5d4020 bf233968 de5d4004 de5d4000
[ 72.344848] 7d60: bf233314 c06148ac de5d4020 c1497ed4 00000000 bf233e40 00000000 c05433ac
[ 72.353422] 7d80: 00000000 de5d4020 bf233e40 de5d4054 00000000 bf236000 00000000 c0543538
[ 72.362002] 7da0: 00000000 bf233e40 c0543484 c05417e4 de1442a4 de5d04d0 bf233e40 de321300
[ 72.370582] 7dc0: c0caa5a4 c05429fc bf233be0 bf233e40 c0cbfa44 bf233e40 c0cbfa44 dd2f7740
[ 72.379148] 7de0: bf233f00 c05442f0 bf233e8c bf233e24 c0cbfa44 c0615ae0 00000000 bf233f00
[ 72.387718] 7e00: c0cbfa44 c010186c 200f0013 c0191650 de714380 00000000 600f0013 00000040
[ 72.396286] 7e20: dd2f7740 c018f1ac 00000001 c0c8356c 024000c0 c01a8854 c0c56e0e c028225c
[ 72.404863] 7e40: dd2f7740 c0191984 de714380 dd2f7740 00000001 bf233f00 bf233f00 c0cbfa44
[ 72.413440] 7e60: dd2f7740 bf233f00 00000001 dd49bf08 dd49bf30 c0230998 00000001 c0c8356c
[ 72.421997] 7e80: c0c4c536 c0cbfa44 c0c0512c c01d2070 bf233f0c 00007fff bf233f00 c01cf5b8
[ 72.430570] 7ea0: 00000000 c1475134 c01cee34 bf23411c bf233f48 bf234054 bf234150 00000000
[ 72.439144] 7ec0: 024002c2 de7fbf40 0009bc20 c02776ac ff800000 00000000 00000000 bf233670
[ 72.447723] 7ee0: 00000004 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 72.456298] 7f00: 00000000 00000000 00000000 00000000 c01d2590 0000aa41 00000000 00000000
[ 72.464862] 7f20: 000b2549 e12c3a41 00000051 de7e6000 0009bc20 c01d2630 00000530 e12b9000
[ 72.473438] 7f40: 0000aa41 e12c1434 e12c1211 e12c336c 00001150 00001620 00000000 00000000
[ 72.482003] 7f60: 00000000 000010fc 00000035 00000036 0000001d 0000001a 00000017 00000000
[ 72.490564] 7f80: de7e6000 3ba39a00 0009b008 0009b718 00000080 c0107704 de7e6000 00000000
[ 72.499141] 7fa0: 0009f609 c0107560 3ba39a00 0009b008 000a7b08 0000aa41 0009bc20 0000aa41
[ 72.507717] 7fc0: 3ba39a00 0009b008 0009b718 00000080 00000001 00000008 0009ab14 0009f609
[ 72.516290] 7fe0: bea31ab8 bea31aa8 0001e5eb b6e83b42 800f0030 000a7b08 0000ffff 0840ffff
[ 72.524883] [<c01a5d88>] (irq_find_matching_fwspec) from [<c01a6ea0>] (irq_create_fwspec_mapping+0x28/0x2e0)
[ 72.535174] [<c01a6ea0>] (irq_create_fwspec_mapping) from [<c01a71a4>] (irq_create_of_mapping+0x4c/0x54)
[ 72.545115] [<c01a71a4>] (irq_create_of_mapping) from [<c0653a70>] (of_irq_get+0x58/0x68)
[ 72.553699] [<c0653a70>] (of_irq_get) from [<c0544d24>] (platform_get_irq+0x1c/0xec)
[ 72.561828] [<c0544d24>] (platform_get_irq) from [<bf1d517c>] (tps6521x_pb_probe+0xd0/0x1a8 [tps65218_pwrbutton])
[ 72.572581] [<bf1d517c>] (tps6521x_pb_probe [tps65218_pwrbutton]) from [<c054537c>] (platform_drv_probe+0x4c/0xac)
[ 72.583426] [<c054537c>] (platform_drv_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc)
[ 72.592729] [<c05433ac>] (driver_probe_device) from [<c0541884>] (bus_for_each_drv+0x58/0x8c)
[ 72.601657] [<c0541884>] (bus_for_each_drv) from [<c05430c8>] (__device_attach+0xb0/0x114)
[ 72.610324] [<c05430c8>] (__device_attach) from [<c0542760>] (bus_probe_device+0x88/0x90)
[ 72.618898] [<c0542760>] (bus_probe_device) from [<c0540ba8>] (device_add+0x3b8/0x560)
[ 72.627203] [<c0540ba8>] (device_add) from [<c05450a0>] (platform_device_add+0xa8/0x208)
[ 72.635693] [<c05450a0>] (platform_device_add) from [<c0571240>] (mfd_add_device+0x240/0x338)
[ 72.644634] [<c0571240>] (mfd_add_device) from [<c0571408>] (mfd_add_devices+0xa0/0x104)
[ 72.653120] [<c0571408>] (mfd_add_devices) from [<c05714d0>] (devm_mfd_add_devices+0x60/0xa8)
[ 72.662077] [<c05714d0>] (devm_mfd_add_devices) from [<bf2333fc>] (tps65217_probe+0xe8/0x2ec [tps65217])
[ 72.672026] [<bf2333fc>] (tps65217_probe [tps65217]) from [<c06148ac>] (i2c_device_probe+0x168/0x1f4)
[ 72.681695] [<c06148ac>] (i2c_device_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc)
[ 72.690816] [<c05433ac>] (driver_probe_device) from [<c0543538>] (__driver_attach+0xb4/0xb8)
[ 72.699657] [<c0543538>] (__driver_attach) from [<c05417e4>] (bus_for_each_dev+0x60/0x94)
[ 72.708224] [<c05417e4>] (bus_for_each_dev) from [<c05429fc>] (bus_add_driver+0x18c/0x214)
[ 72.716892] [<c05429fc>] (bus_add_driver) from [<c05442f0>] (driver_register+0x78/0xf8)
[ 72.725280] [<c05442f0>] (driver_register) from [<c0615ae0>] (i2c_register_driver+0x38/0x80)
[ 72.734120] [<c0615ae0>] (i2c_register_driver) from [<c010186c>] (do_one_initcall+0x3c/0x178)
[ 72.743055] [<c010186c>] (do_one_initcall) from [<c0230998>] (do_init_module+0x5c/0x1d0)
[ 72.751537] [<c0230998>] (do_init_module) from [<c01d2070>] (load_module+0x1d10/0x21c0)
[ 72.759933] [<c01d2070>] (load_module) from [<c01d2630>] (SyS_init_module+0x110/0x154)
[ 72.768242] [<c01d2630>] (SyS_init_module) from [<c0107560>] (ret_fast_syscall+0x0/0x1c)
[ 72.776725] Code: e5944000 e1540006 0a00001b e594300c (e593c004)
[ 72.783181] ---[ end trace 0278ec325f4689b8 ]---
Fixes: 6556bdacf646 ("mfd: tps65217: Add support for IRQs")
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fcf7cf1551cae54e747a771f5808240f2a37708f upstream.
This partially reverts 'commit 2cdce425aa33
("ath10k: Fix broken NULL func data frame status for 10.4")'
Unfortunately this breaks sending NULL func and the existing
issue of obtaining proper tx status for NULL function will be
fixed. Also update the comments for feature flag added to be
useless and not working
Fixes: 2cdce425aa33 "ath10k: Fix broken NULL func data frame status for
10.4"
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c57b18adb93fc070039538f1ce375d3d3e99bbb upstream.
It's been unfixed since a while and no one is immediately working on
this. And we have the FIXME already. And now also a task in the DP
team's backlog.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.html
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Adjust comment per Ville's feedback.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213195414.28923-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2dd85aeb5bc99e3763dd192cdb95ff405a102c8a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
commit d4cb3fd9b548b8bfe2a712ec920b9ebabd3547ab upstream.
Currently it's entirely possible to go through the link training step
without first determining the lane_count, which is silly since we end up
doing a bunch of aux transfers of size = 0, as highlighted by
WARN_ON(!msg->buffer != !msg->size), and can only ever result in a
'failed to update link training' message. This can be observed during
intel_dp_long_pulse where we can do the link training step, but before
we have had a chance to set the link params. To avoid this we add an
extra check for the lane_count in intel_dp_check_link_status, which
should prevent us from doing the link training step prematurely.
v2: add WARN_ON_ONCE and FIXME comment (Ville)
References: https://bugs.freedesktop.org/show_bug.cgi?id=97344
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476912593-10019-1-git-send-email-matthew.auld@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d62145929992f331fdde924d5963ab49588ccc7d upstream.
commit 0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced") introduced a bug
where we would leak DMA resources which would cause
us to starve the system of them resulting in failing
DMA transfers.
Fix the bug by making sure that we always unmap EP0
requests since those are *always* mapped.
Fixes: 0416e494ce7d ("usb: dwc3: ep0: correct cache
sync issue in case of ep0_bounced")
Cc: <stable@vger.kernel.org>
Tested-by: Tomasz Medrek <tomaszx.medrek@intel.com>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19ec31230eb3084431bc2e565fd085f79f564274 upstream.
Let's call dwc3_ep0_prepare_one_trb() explicitly
because there are occasions where we will need more
than one TRB to handle an EP0 transfer.
A follow-up patch will fix one bug related to
multiple-TRB Data Phases when it comes to
mapping/unmapping requests for DMA.
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7931ec86c1b738e4e90e58c6d95e5f720d45ee56 upstream.
For now this is just a cleanup patch, no functional
changes. We will be using the new function to fix a
bug introduced long ago by commit 0416e494ce7d
("usb: dwc3: ep0: correct cache sync issue in case
of ep0_bounced") and further worsened by commit
c0bd5456a470 ("usb: dwc3: ep0: handle non maxpacket
aligned transfers > 512")
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65e4345c8ef8811bbb4860fe5f2df10646b7f2e1 upstream.
The LIS3LV02 has a special bit that need to be set to get the
read values left aligned. Before this patch we get gibberish
like this:
iio_generic_buffer -a -c10 -n lis3lv02dl_accel
(...)
0.000000 -0.010042 -0.642688 19155832931907
0.000000 -0.010042 -0.642688 19155858751073
Which is because we read a raw value for 1g as 64 which is
the nominal 1024 for 1g shifted 4 bits to the left by being
right-aligned rather than left aligned.
Since all other sensors are left aligned, add some code to
set the special DAS (data alignment setting) bit to 1 so that
the right value is now read like this:
iio_generic_buffer -a -c10 -n lis3lv02dl_accel
(...)
0.000000 -0.147095 -10.120135 24761614364956
-0.029419 -0.176514 -10.120135 24761631624540
The scaling was weird as well: we have a gain of 1000 for 1g
and 3000 for 6g. I don't even remember how I came up with the
old values but they are wrong.
Fixes: 3acddf74f807 ("iio: st-sensors: add support for lis3lv02d accelerometer")
Cc: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b321a38d2407c7e425c54bc09be909a34e49f740 upstream.
The oversampling ratio is controlled using the oversampling pins,
OS [2:0] with OS2 being the MSB control bit, and OS0 the LSB control
bit.
The gpio connected to the OS2 pin is not being set correctly, only OS0
and OS1 pins are being set. Fix the typo to allow proper control of the
oversampling pins.
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Fixes: b9618c0 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e09ee853c92011860a4bd2fbdf6126f60fc16bd3 upstream.
The credentials handling was pushed to the write handlers
but error handling wasn't done properly.
Move write callbacks to completion queue to destroy them
and to notify a blocked writer about the failure
Fixes: 136698e535cd1 (mei: push credentials inside the irq write handler)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5026c9cb0744a9cd40242743ca91a5d712f468c6 upstream.
Adjust function name in KDoc.
Fixes: d49dc5e76fc9 (mei: bus: use mei_cldev_ prefix for the API functions)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 967b274e02e18c9fbb4d19b96a89bd0afbc77b7a upstream.
Parameter renaming to fop_type was not reflected in KDoc
Fixes: 3030dc0564594 (mei: add wrapper for queuing control commands)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e35d6d7c4e6532a89732cf4bace0e910ee684c88 upstream.
Bind to the interface, but do not register any ports, after having
downloaded the firmware. The device will still disconnect and
re-enumerate, but this way we avoid an error messages from being logged
as part of the process:
io_ti: probe of 1-1.3:1.0 failed with error -5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f5ecaf985c46889278f51fcb7bc143f60f4eb14 upstream.
'buf' is malloced in dibusb_rc_query() and should be freed before
leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes: ff1c123545d7 ("[media] dibusb: handle error code on RC query")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 015105b12183556771e111e93f5266851e7c5582 upstream.
Make sure to drop the references taken by of_parse_phandle() and
bus_find_device() before returning from am335x_get_phy_control().
Note that there is no guarantee that the devres-managed struct
phy_control will be valid for the lifetime of the sibling phy device
regardless of this change.
Fixes: 3bb869c8b3f1 ("usb: phy: Add AM335x PHY driver")
Acked-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03274445c01562d5352ea522431ab8c6175e2bbf upstream.
Pass a task state as second argument to percpu_ida_alloc().
Fixes: commit 71e7ae8e1fb2 ("usb-gadget/tcm: Conversion to percpu_ida tag pre-allocation")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c3dd1e058cb01e835dcade4b54a6f13ffaeaf7c upstream.
Function klsi_105_open() calls usb_control_msg() (to "enable read") and
checks its return value. When the return value is unexpected, it only
assigns the error code to the return variable retval, but does not
terminate the exception path. This patch fixes the bug by inserting
"goto err_generic_close;" when the call to usb_control_msg() fails.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pan Bian <bianpan2016@163.com>
[johan: rebase on prerequisite fix and amend commit message]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5563bb5743cb09bde0d0f4660a5e5b19c26903bf upstream.
The function bfin_fifo_offset is defined but not used:
drivers/usb/musb/blackfin.c:36:12: warning: ‘bfin_fifo_offset’ defined
but not used [-Wunused-function]
static u32 bfin_fifo_offset(u8 epnum)
^~~~~~~~~~~~~~~~
Adding bfin_fifo_offset to bfin_ops fixes this warning and allows musb
core to call this function instead of default_fifo_offset.
Fixes: cc92f6818f6e ("usb: musb: Populate new IO functions for blackfin")
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b01738112608ce47083178ae2b9ebadf02d32cc upstream.
This fixes a regression which was introduced by commit f1bddbb, by
reverting a small fragment of commit 855ed04.
If the following conditions were met, usb_gadget_probe_driver() returned
0, although the call was unsuccessful:
1. A particular UDC was specified by thge gadget driver (using member
"udc_name" of struct usb_gadget_driver).
2. The UDC with this name is available.
3. Another gadget driver is already bound to this gadget.
4. The gadget driver has the "match_existing_only" flag set.
In this case, the return code variable "ret" is set to 0, the return
code of a strcmp() call (to check for the second condition).
This also fixes an oops which could occur in the following scenario:
1. Two usb gadget instances were configured using configfs.
2. The first gadget configuration was bound to a UDC (using the configfs
attribute "UDC").
3. It was tried to bind the second gadget configuration to the same UDC
in the same way. This operation was then wrongly reported as being
successful.
4. The second gadget configuration's "UDC" attribute is cleared, to
unbind the (not really bound) second gadget configuration from the UDC.
<BUG: unable to handle kernel NULL pointer dereference
at (null)
IP: [<ffffffff94f5e5e9>] __list_del_entry+0x29/0xc0
PGD 41b4c5067
PUD 41a598067
PMD 0
Oops: 0000 [#1] SMP
Modules linked in: cdc_acm usb_f_fs usb_f_serial
usb_f_acm u_serial libcomposite configfs dummy_hcd bnep intel_rapl
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm
snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper
ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic serio_raw
uvcvideo videobuf2_vmalloc btusb snd_usb_audio snd_hda_intel
videobuf2_memops btrtl snd_hda_codec snd_hda_core snd_usbmidi_lib btbcm
videobuf2_v4l2 btintel snd_hwdep videobuf2_core snd_seq_midi bluetooth
snd_seq_midi_event videodev xpad efi_pstore snd_pcm_oss rfkill joydev
media crc16 ff_memless snd_mixer_oss snd_rawmidi nls_ascii snd_pcm
snd_seq snd_seq_device nls_cp437 mei_me snd_timer vfat sg udc_core
lpc_ich fat
efivars mfd_core mei snd soundcore battery nuvoton_cir rc_core evdev
intel_smartconnect ie31200_edac edac_core shpchp tpm_tis tpm_tis_core
tpm parport_pc ppdev lp parport efivarfs autofs4 btrfs xor raid6_pq
hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid uas
usb_storage sr_mod cdrom sd_mod ahci libahci nouveau i915 crc32c_intel
i2c_algo_bit psmouse ttm xhci_pci libata scsi_mod ehci_pci
drm_kms_helper xhci_hcd ehci_hcd r8169 mii usbcore drm nvme nvme_core
fjes button [last unloaded: net2280]
CPU: 5 PID: 829 Comm: bash Not tainted 4.9.0-rc7 #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77
Extreme3, BIOS P1.50 07/11/2013
task: ffff880419ce4040 task.stack: ffffc90002ed4000
RIP: 0010:[<ffffffff94f5e5e9>] [<ffffffff94f5e5e9>]
__list_del_entry+0x29/0xc0
RSP: 0018:ffffc90002ed7d68 EFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff88041787ec30 RCX: dead000000000200
RDX: 0000000000000000 RSI: ffff880417482002 RDI: ffff88041787ec30
RBP: ffffc90002ed7d68 R08: 0000000000000000 R09: 0000000000000010
R10: 0000000000000000 R11: ffff880419ce4040 R12: ffff88041787eb68
R13: ffff88041787eaa8 R14: ffff88041560a2c0 R15: 0000000000000001
FS: 00007fe4e49b8700(0000) GS:ffff88042f340000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000041b4c4000 CR4: 00000000001406e0
Stack:
ffffc90002ed7d80 ffffffff94f5e68d ffffffffc0ae5ef0 ffffc90002ed7da0
ffffffffc0ae22aa ffff88041787e800 ffff88041787e800 ffffc90002ed7dc0
ffffffffc0d7a727 ffffffff952273fa ffff88041aba5760 ffffc90002ed7df8
Call Trace:
[<ffffffff94f5e68d>] list_del+0xd/0x30
[<ffffffffc0ae22aa>] usb_gadget_unregister_driver+0xaa/0xc0 [udc_core]
[<ffffffffc0d7a727>] unregister_gadget+0x27/0x60 [libcomposite]
[<ffffffff952273fa>] ? mutex_lock+0x1a/0x30
[<ffffffffc0d7a9b8>] gadget_dev_desc_UDC_store+0x88/0xe0 [libcomposite]
[<ffffffffc0af8aa0>] configfs_write_file+0xa0/0x100 [configfs]
[<ffffffff94e10d27>] __vfs_write+0x37/0x160
[<ffffffff94e31430>] ? __fd_install+0x30/0xd0
[<ffffffff95229dae>] ? _raw_spin_unlock+0xe/0x10
[<ffffffff94e11458>] vfs_write+0xb8/0x1b0
[<ffffffff94e128f8>] SyS_write+0x58/0xc0
[<ffffffff94e31594>] ? __close_fd+0x94/0xc0
[<ffffffff9522a0fb>] entry_SYSCALL_64_fastpath+0x1e/0xad
Code: 66 90 55 48 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 89
e5 48 39 c8 74 29 48 b9 00 02 00 00 00 00 ad de 48 39 ca 74 3a <4c> 8b
02 4c 39 c7 75 52 4c 8b 40 08 4c 39 c7 75 66 48 89 50 08
RIP [<ffffffff94f5e5e9>] __list_del_entry+0x29/0xc0
RSP <ffffc90002ed7d68>
CR2: 0000000000000000
---[ end trace 99fc090ab3ff6cbc ]---
Fixes: f1bddbb ("usb: gadget: Fix binding to UDC via configfs interface")
Signed-off-by: Felix Hädicke <felixhaedicke@web.de>
Tested-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bc02bce908c7250781376052248f5cd60a4e3d4 upstream.
If CONFIG_PM=n:
drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called
drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here
To fix this, move hub_port_disable() after
hub_usb3_port_prepare_disable(), and adjust forward declarations.
Fixes: 37be66767e3cae4f ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c300fe282fa254ea730c92cb0983e2642dc1fff upstream.
When unloading omap2430, we can get the following splat:
WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8
Trying to free already-free IRQ 4
...
[<c01a8b78>] (free_irq) from [<bf0aea84>]
(musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc])
[<bf0aea84>] (musbhs_dma_controller_destroy [musb_hdrc]) from
[<bf09f88c>] (musb_remove+0xf0/0x12c [musb_hdrc])
[<bf09f88c>] (musb_remove [musb_hdrc]) from [<c056a384>]
(platform_drv_remove+0x24/0x3c)
...
This is because the irq number in use is 260 nowadays, and the dma
controller is using u8 instead of int.
Fixes: 6995eb68aab7 ("USB: musb: enable low level DMA operation for Blackfin")
Signed-off-by: Tony Lindgren <tony@atomide.com>
[b-liu@ti.com: added Fixes tag]
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9418ee15f718939aa7e650fd586d73765eb21f20 upstream.
DCFG.DEVSPD == 0x3 is not valid and we need to set
DCFG.DEVSPD to 0x1 for full speed mode. Same goes for
DSTS.CONNECTSPD.
Old databooks had 0x3 for full speed in 48MHz mode for
USB1.1 transceivers which was never supported. Newer databooks
don't mention 0x3 at all.
Cc: John Youn <John.Youn@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 51c1685d956221576e165dd88a20063b169bae5a upstream.
usb_get_dr_mode() expects the device-property to be spelled
"dr_mode" not "dr-mode".
Spelling it properly fixes the following warning showing up in dmesg:
[ 8704.500545] dwc3 dwc3.2.auto: Configuration mismatch. dr_mode forced to gadget
Signed-off-by: Hans de Goede <hdegoede@redhat.com
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8f8983a5683623b62b339d159573f95a1fce44f3 upstream.
Intel Gemini Lake SoC has the same DWC3 than Broxton. Add
the new ID to the supported Devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c111b6c3844a142e03bcfc2fa17bfbdea08e9dc upstream.
Current abort operation has race.
xhci_handle_command_timeout()
xhci_abort_cmd_ring()
xhci_write_64(CMD_RING_ABORT)
xhci_handshake(5s)
do {
check CMD_RING_RUNNING
udelay(1)
...
COMP_CMD_ABORT event
COMP_CMD_STOP event
xhci_handle_stopped_cmd_ring()
restart cmd_ring
CMD_RING_RUNNING become 1 again
} while ()
return -ETIMEDOUT
xhci_write_64(CMD_RING_ABORT)
/* can abort random command */
To do abort operation correctly, we have to wait both of COMP_CMD_STOP
event and negation of CMD_RING_RUNNING.
But like above, while timeout handler is waiting negation of
CMD_RING_RUNNING, event handler can restart cmd_ring. So timeout
handler never be notice negation of CMD_RING_RUNNING, and retry of
CMD_RING_ABORT can abort random command (BTW, I guess retry of
CMD_RING_ABORT was workaround of this race).
To fix this race, this moves xhci_handle_stopped_cmd_ring() to
xhci_abort_cmd_ring(). And timeout handler waits COMP_CMD_STOP event.
At this point, timeout handler is owner of cmd_ring, and safely
restart cmd_ring by using xhci_handle_stopped_cmd_ring().
[FWIW, as bonus, this way would be easily extend to add CMD_RING_PAUSE
operation]
[locks edited as patch is rebased on other locking fixes -Mathias]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb4d5ce588c5ff68e0fdd30370a0e6bc2c0a736b upstream.
This is preparation to fix abort operation race (See "xhci: Fix race
related to abort operation"). To make timeout sleepable, use
delayed_work instead of timer.
[change a newly added pending timer fix to pending work -Mathias]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c95a9f83711bf53faeb4ed9bbb63a3f065613dfb upstream.
We normally use the passed in gfp flags for allocations, it's just these
two which were missed.
Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()")
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fde1faf872ed86d88e245191bc15a8e57368cd1c upstream.
A static usb-serial-driver structure that is used to initialise the
interrupt URB was modified during probe depending on the currently
probed device type, something which could break a parallel probe of a
device of a different type.
Fix this up by overriding the default completion callback for MCS7715
devices in attach() instead. We may want to use two usb-serial driver
instances for the two types later.
Fixes: fb088e335d78 ("USB: serial: add support for serial port on the moschip 7715")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 75dd211e773afcbc264677b0749d1cf7d937ab2d upstream.
Do not submit the interrupt URB until after the parport has been
successfully registered to avoid another use-after-free in the
completion handler when accessing the freed parport private data in case
of a racing completion.
Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91a1ff4d53c5184d383d0baeeaeab6f9736f2ff3 upstream.
The interrupt URB was submitted on probe but never stopped on probe
errors. This can lead to use-after-free issues in the completion
handler when accessing the freed usb-serial struct:
Unable to handle kernel paging request at virtual address 6b6b6be7
...
[<bf052e70>] (mos7715_interrupt_callback [mos7720]) from [<c052a894>] (__usb_hcd_giveback_urb+0x80/0x140)
[<c052a894>] (__usb_hcd_giveback_urb) from [<c052a9a4>] (usb_hcd_giveback_urb+0x50/0x138)
[<c052a9a4>] (usb_hcd_giveback_urb) from [<c0550684>] (musb_giveback+0xc8/0x1cc)
Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b05aebc25fdc5aeeac3ee29f0dc9f58dd07c13cc upstream.
Fix NULL-pointer dereference at port open if a device lacks the expected
bulk in and out endpoints.
Unable to handle kernel NULL pointer dereference at virtual address 00000030
...
[<bf071c20>] (mos7720_open [mos7720]) from [<bf0490e0>] (serial_port_activate+0x68/0x98 [usbserial])
[<bf0490e0>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8)
[<c0470ca4>] (tty_port_open) from [<bf049d98>] (serial_open+0x48/0x6c [usbserial])
[<bf049d98>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc)
Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c75633ef751dd4cd8f443dc35152c1ae563162e upstream.
Fix NULL-pointer dereference in open() should the device lack the
expected endpoints:
Unable to handle kernel NULL pointer dereference at virtual address 00000030
...
PC is at mos7840_open+0x88/0x8dc [mos7840]
Note that we continue to treat the interrupt-in endpoint as optional for
now.
Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
