summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-10-19net: hisilicon fix a bug on Hisilicon Network Subsystemhuangdaode
This patch fixes the wrong judgement of mac_id when get port num. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Signed-off-by: yankejian <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19net: hisilicon rm hnae sysfs interfacehuangdaode
This patch removes the hns driver hnae sysfs interface according to Arnd's review comments. Signed-off-by: huangdaode <huangdaode@hisilicon.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19net: phy: bcm-phy-lib: Fix module license issueArun Parameswaran
The 'bcm-phy-lib.c', added as a part of the commit "net: phy: Add Broadcom phy library for common interfaces" was missing the module license. This was causing an issue when the library is built as a module; "module license 'unspecified' taints kernel". This patch fixes the issue by adding the module license, author and description to the bcm-phy-lib.c file. Fixes: a1cba5613edf5 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: spectrum: Add initial support for Spectrum ASICJiri Pirko
Add support for new generation Mellanox Spectrum ASIC, 10/25/40/50 and 100Gb/s Ethernet Switch. The initial driver implements bridge forwarding offload including bridge internal VLAN support, FDB static entries, FDB learning and HW ageing including their setup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VLAN MAC Learning register definitionIdo Schimmel
Since we currently do not support the offloading of 802.1D bridges, we need to be able to let the device know it should not learn MAC addresses on specific {Port, VID} pairs. Add the SPVMLR register, which controls the learning enablement of {Port, VID} pairs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database Aging Time register definitionJiri Pirko
Add SFDAT which is used to control switch ageing time. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Virtual-Port Enabling register definitionIdo Schimmel
In order for a port to support {Port, VID} to FID mapping it needs to be configured to a virtual port mode (as opposed to VLAN mode). Add the SVPE register, which enables port virtualization. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch VID to FID Allocation register definitionIdo Schimmel
An incoming packet can be classified into a filtering identifer (FID) based on its VID or incoming port and VID ({Port, VID}). Add the SVFA register, which controls this mapping. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FID Management register definitionIdo Schimmel
Filtering identifiers (FIDs) are unique identifers of bridge instances in the hardware. Add the SFMR register, which is responsible for the creation and configuration of these FIDs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add shared buffer configuration registers definitionsJiri Pirko
Add definitions of SBPR, SBCM, SBPM, SBMM and PBMC registers that are used to configure shared buffers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers ↵Elad Raz
definitions Add SPVID and SPVM registers responsible for default port VID configuration and VLAN membership of a port. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FDB Notification register definitionJiri Pirko
Add SFN register which is used to poll for newly added and aged-out FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database register definitionJiri Pirko
Add the SFD register which is responsible for filtering database manipulation, including static and dynamic FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Add MLXSW_ITEM_BUF_INDEXED helperJiri Pirko
Add missing item helper which allows to access char bufs on multiple offsets. This is needed by SFD and SFN register definitions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Make src arg of memcpy_to helper constJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce FID-offset flooding tablesIdo Schimmel
Packets destined to offloaded netdevs will be classified to FIDs in the device and flooded in case of BUM. The flooding table used is of type FID-offset, which allows one to create different flooding domains for different FIDs and specify the offset in the flooding table for each FID (not necessarily equal to FID or VID). Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce per-FID flooding tablesIdo Schimmel
In the newly introduced Spectrum switch ASIC, packets destined to not offloaded netdevs will be classified to special FIDs (vFIDs) in the device and flooded to the CPU port. The flooding table used is of type per-FID, which allows one to create different flooding domains for different vFIDs. While using a simple single-entry flood table is certainly sufficient at this point, we do plan to offload 802.1D bridges involving VLAN interfaces, thus making this change necessary. Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Enable configuration of flooding domainsIdo Schimmel
As part of the introduction of L2 offloads, allow different ports to join/leave the flooding domain, according to user configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16i40e/i40evf: Bump i40e to 1.3.34 and i40evf to 1.3.21Catherine Sullivan
Bump. Change-ID: I7ec818a507554648675b9b245ced9e6b6bd9ed4e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: increase AQ work limitMitch Williams
With 64 VFs, we can easily overwhelm the AQ on the PF if we have too low a limit on the number of AQ requests. This leads to ARQ overflow errors, and occasionally VFs that fail to initialize. Since we really only hit this condition on initial VF driver load, the requests that we process are lightweight, so this extra work doesn't cause problems for the PF driver. Change-ID: I620221520d8af987df6ace9ba938ffaf22107681 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: relax and stagger init timing a bitMitch Williams
On some devices, in some systems, in some configurations, the VFs would fail to initialize the first time you loaded the driver. To correct this, increase the delay time for the init task slightly, and wait longer before giving up. If we enable VFs and load the VF driver in the same kernel as the PF driver, we can totally overwhelm the PF driver with AQ requests because all of the instances try to initialize at the same time. To help alleviate this, stagger the initial scheduling of the init task using the PCIe function as a multiplier. We mask off the function to only three bits so no instance has to wait too long. With these two changes, initializing 128 VFs on a single device goes from four minutes to just a few seconds. Change-ID: If3d8720c1c4e838ab36d8781d9ec295a62380936 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Recognize 1000Base_T_Optical phy type when link is upCatherine Sullivan
1000Base_T_Optical got added to the function that figures out what is supported when link is down but not when link is up. Add it in there too so that we display the correct information. Change-ID: I85ebcdfa7c02d898c44c673b1500552a53c8042e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: correctly populate vlan_featuresMitch Williams
The vlan_features field was correctly being set to the same value as the netdev features field. However, this was being done before the features were actually being set up, leaving the vlan_features empty. Also, after a reset, vlan_features will be incorrectly assigned the previous netdev feature flags, which can contain VLAN feature bits. This makes the VLAN code angry and will cause a stack dump. To fix these issues, set up the netdev features first, then mask out the VLAN feature bits when assigning vlan_features. Change-ID: Ib0548869dc83cf6a841cb8697dd94c12359ba4d2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: reset the invalid msg counter in vf when a valid msg is receivedJingjing Wu
When the number of invalid messages from a VF is exceeded, the VF will be disabled, due to the invalid messages. This happens if other VF drivers (like DPDK) send a message through the driver's mailbox (aka virtchannel) interface, but the message is not supported by the i40e pf driver, such as CONFIG_PROMISCUOUS_MODE. This patch changes the num_invalid_msgs in struct i40e_vf to record the continuous invalid msgs, and it will be reset when a valid msg is received. Change-ID: Iaec42fd3dcdd281476b3518be23261dd46fc3718 Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: moderate interrupts differentlyJesse Brandeburg
The XL710 hardware has a different interrupt moderation design that can support a limit of total interrupts per second per vector, in addition to the "number of interrupts per second" controls already established in the driver. This combination of hardware features allows us to set very low default latency settings but minimize the total CPU utilization by not making too many interrupts, should the user desire. The current driver implementation is still enabling the dynamic moderation in the driver, and only using the rx/tx-usecs limit in ethtool to limit the interrupt rate per second, by default. The new code implemented in this patch 2) adds init/use of the new "Interrupt Limit" register 3) adds ethtool knob to control/report the limits above Usage is ethtool -C ethx rx-usecs-high <value> Where <value> is number of microseconds to create a rate of 1/N interrupts per second, regardless of rx-usecs or tx-usecs values. Since there is a credit based scheme in the hardware, the rx-usecs and tx-usecs can be configured for very low latency for short bursts, but once the credit runs out the refill rate on the credits is limited by rx-usecs-high. Change-ID: I3a1075d3296123b0f4f50623c779b027af5b188d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Add support for non-willing AppsGreg Bowers
Adds support for setting a new bit in the Set Local LLDP MIB AQ command Type field. When set to 1, the bit indicates to FW that Apps should be treated as non-willing. When 0, FW behaves as before. Change-ID: I0d2101c1606c59c7188d3e6a0c7810e0f205233a Signed-off-by: Greg Bowers <gregory.j.bowers@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: priv flag for controlling VEB statsShannon Nelson
Add an ethtool priv flag to enable and disable printing the VEB statistics. Change-ID: I7654054a3a73b08aa8310d94ee8fce6219107dd8 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Removed unused definesGreg Rose
Two defines that are not used are causing customer confusion - remove them. Change-ID: Icef0325aca8e0f4fcdfc519e026bdd375e791200 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: remove read/write failed messages from nvmupdateShannon Nelson
Allow the nvmupdate application to decide when a read or write error should be exposed to the user. Since the application needs to use write probes to find the ReadOnly sections on a potentially unknown NVM version in the HW and read probes to check the status of the last write, some error messages are expected, but need not be shown to the users. The driver doesn't know which are ignorable from real errors, so needs to let the application make the decision. Change-ID: I78fca8ab672bede11c10c820b83c26adfd536d03 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Fix compile issue related to const stringJingjing Wu
Add const to functions that return strings that aren't going to be modified. This addresses some reported compile complaints. Change-ID: Ic56b1e814ab4d23a50480e7fdec652445f776ee8 Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: generate fewer startup messagesShannon Nelson
Cut down on the number of startup log entries by putting a couple behind debug flags and combining a couple others into a single line. Change-ID: I708089f086308f84d43f8b6f0e8a634a02d058fb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16drivers/net/intel: use napi_complete_done()Jesse Brandeburg
As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: Add support for netpollAlexander Duyck
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Drop useless "IN_NETPOLL" flagAlexander Duyck
The code in i40e and i40evf is using an "IN_NETPOLL" flag that has never added any value due to the fact that the Rx clean-up is handled in NAPI. As such the flag was set, the queue was scheduled via NAPI, and then polled from the netpoll controller and if any Rx packets were processed the were processed in the wrong context. In addition the flag itself just added an unneeded conditional to the hot-path so it can safely be dropped and save us a few instructions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Fix handling of napi budgetAlexander Duyck
The polling routine for i40e was rounding up the budget for Rx cleanup to 1. This is incorrect as the netpoll poll call is expecting no Rx to be processed as the budget passed was 0. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlx4: corretly check failed allocationInsu Yun
When allocation fails, mlx4_alloc_cmd_mailbox returns -ENOMEM. Since there is no case that mlx4_alloc_cmd_mailbox returns NULL, it needs to be checked by IS_ERR, not IS_ERR_OR_NULL Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16bonding: support encapsulated ipv6 TSOEric Dumazet
If using a sixtofour device on top of a bonding device, skb segmentation of TCP traffic is done right before calling bonding xmit, because bonding only enables TSO for IPv4. This patch improves single flow performance by about 120 % on my hosts, because segmentation is deferred right before calling slave xmit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Update CONFIG_PROFILE command documentationIdo Schimmel
The meaning of certain parameters in the profile passed to the device during initialization has changed, so update their documentation accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Add trap group for control packetsIdo Schimmel
Previously, we trapped flooded and control packets using the same trap group. This can cause flooded packets to overflow the PCI bus and prevent control packets (e.g. STP, LACP) from getting to the CPU. Solve this by splitting the RX trap group to RX and control, which allows us to configure a policer on the first, thereby preventing it from overflowing the PCI bus. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Simplify traps creationIdo Schimmel
The Host Trap Group Table (HTGT) register configures trap groups, which are populated with trap IDs using the Host PacKet Trap (HPKT) register. However, a trap ID can only be present inside one trap group (the last configured). Instead of passing both the trap group and ID for the function that packs HPKT, pass only the trap ID and derive from it the trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Introduce mlxsw_reg_spms_vid_pack helper and use itJiri Pirko
Introduce separate helper for packing SPMS VIDs, as it can be used for multiple VIDs and not only for one as previous SPMS pack function provided. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Adjust definition of enum mlxsw_reg_sfgc_typeIdo Schimmel
Define max which would be needed later on. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Remove extra space in SFGC ID defineJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Uppercase letters in register IDsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Use dev_level_ratelimited instead of net_ratelimit & dev_levelJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: core: Do not use EMADs in mlxsw_emad_finiJiri Pirko
Be symmetric with mlxsw_emad_init and don't use EMADs in mlxsw_emad_fini cleanup function. Use command interface instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: pci: Limit number of entries being sent in single MAP_FA cmdJiri Pirko
Firmware accepts only limited number of mapping entries for MAP_FA command. In order to prevent overflow, introduce a limit and in case the number of entries is bigger, call MAP_FA multiple times. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: pci: Remove MLXSW_PCI_RDQS/SDQS defines and checksJiri Pirko
Remove strict number check of queues count as various ASICs have different counts. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: pci: Do not use MLXSW_PCI_SDQS_COUNT defineJiri Pirko
Use mlxsw_pci_sdq_count helper instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-06 23:37:22 (GMT)