| Age | Commit message (Collapse) | Author |
|---|
|
Mediatek SoC's M4U has two generations of HW architcture. Generation one
uses flat, one layer pagetable, and was shipped with ARM architecture, it
only supports 4K size page mapping. MT2701 SoC uses this generation one
m4u HW. Generation two uses the ARM short-descriptor translation table
format for address translation, and was shipped with ARM64 architecture,
MT8173 uses this generation two m4u HW. All the two generation iommu HW
only have one iommu domain, and all its iommu clients share the same
iova address.
These two generation m4u HW have slit different register groups and
register offset, but most register names are the same. This patch add iommu
support for mediatek SoC mt2701.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Mediatek SMI has two generations of HW architecture, mt8173 uses the
second generation of SMI HW while mt2701 uses the first generation
HW of SMI.
There's slight differences between the two generations, for generation 2,
the register which control the iommu port access PA or IOVA is at each
larb's register base. But for generation 1, the register is at smi ao
base(smi always on register base).
Besides that, the smi async clock should be prepared and enabled for SMI
generation 1 HW to transform the smi clock into emi clock domain, but is
not needed for SMI generation 2.
This patch add SMI driver for mt2701 which use generation 1 SMI HW.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move the struct defines of mtk iommu into a new header files for
common use.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The device_node will be released in of_iommu_configure, it may be double
released if call of_node_put in mtk_iommu_of_xlate.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- fix an ordering issue in cpu cooling that cooling device is
registered before it's ready (freq_table being populated).
(Lukasz Luba)
- fix a missing comment update (Caesar Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: add the note for set_trip_temp
thermal: cpu_cooling: fix improper order during initialization
|
|
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. This contains:
- Two fixes for xen-blkfront, from Bob Liu.
- A bug fix for NVMe, releasing only the specific resources we
requested.
- Fix for a debugfs flags entry for nbd, from Josef.
- Plug fix from Omar, fixing up a case of code being switched between
two functions.
- A missing bio_put() for the new discard callers of
submit_bio_wait(), fixing a regression causing a leak of the bio.
From Shaun.
- Improve dirty limit calculation precision in the writeback code,
fixing a case where setting a limit lower than 1% of memory would
end up being zero. From Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: Only release requested regions
xen-blkfront: fix resume issues after a migration
xen-blkfront: don't call talk_to_blkback when already connected to blkback
nbd: pass the nbd pointer for flags debugfs
block: missing bio_put following submit_bio_wait
blk-mq: really fix plug list flushing for nomerge queues
writeback: use higher precision calculation in domain_dirty_limits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A new bunch of GPIO fixes for v4.7.
This time I am very grateful that Ricardo Ribalda Delgado went in and
fixed my stupid refcounting mistakes in the removal path for GPIO
chips. I had a feeling something was wrong here and so it was. It
exploded on OMAP and it fixes their problem. Now it should be (more)
solid.
The rest i compilation, Kconfig and driver fixes. Some tagged for
stable.
Summary:
- Fix a NULL pointer dereference when we are searching the GPIO
device list but one of the devices have been removed (struct
gpio_chip pointer is NULL).
- Fix unaligned reference counters: we were ending on +3 after all
said and done. It should be 0. Remove an extraneous get_device(),
and call cdev_del() followed by device_del() in gpiochip_remove()
instead and the count goes to zero and calls the release() function
properly.
- Fix a compile warning due to a missing #include in the OF/device
tree portions.
- Select ANON_INODES for GPIOLIB, we're using that for our character
device. Some randconfig tests disclosed the problem.
- Make sure the Zynq driver clock runs also without CONFIG_PM enabled
- Fix an off-by-one error in the 104-DIO-48E driver
- Fix warnings in bcm_kona_gpio_reset()"
* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
gpio: select ANON_INODES
gpio: include <linux/io-mapping.h> in gpiolib-of
gpiolib: Fix unaligned used of reference counters
gpiolib: Fix NULL pointer deference
gpio: zynq: initialize clock even without CONFIG_PM
gpio: 104-dio-48e: Fix control port offset computation off-by-one error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two current fixes:
- one affects Qemu CD ROM emulation, which stopped working after the
updates in SCSI to require VPD pages from all conformant devices.
Fix temporarily by blacklisting Qemu (we can relax later when they
come into compliance).
- The other is a fix to the optimal transfer size. We set up a
minefield for ourselves by being confused about whether the limits
are in bytes or sectors (SCSI optimal is in blocks and the queue
parameter is in bytes).
This tries to fix the problem (wrong setting for queue limits
max_sectors) and make the problem more obvious by introducing a
wrapper function"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
sd: Fix rw_max for devices that report an optimal xfer size
scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- a bigger fix for i801 to finally be able to be loaded on some
machines again
- smaller driver fixes
- documentation update because of a renamed file
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: reg: Provide of_match_table
i2c: mux: refer to i2c-mux.txt
i2c: octeon: Avoid printk after too long SMBUS message
i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix unflatten_dt_nodes when dad parameter is set.
- add vendor prefixes for TechNexion and UniWest
- documentation fix for Marvell BT
- OF IRQ kerneldoc fixes
- restrict CMA alignment adjustments to non dma-coherent
- a couple of warning fixes in reserved-memory code
- DT maintainers updates
* tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
drivers: of: Fix of_pci.h header guard
dt-bindings: Add vendor prefix for TechNexion
of: add vendor prefix for UniWest
dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
of: silence warnings due to max() usage
drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
of: irq: fix of_irq_get[_byname]() kernel-doc
MAINTAINERS: DeviceTree maintainer updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux
Pull uvc compat XU ioctl fixes from Andy Lutomirski:
"uvc's compat XU ioctls go through tons of potentially buggy
indirection. The first patch removes the indirection. The second one
cleans up the code.
Compile-tested only. I have the hardware, but I have absolutely no
idea what XU does, how to use it, what software to recompile as
32-bit, or what to test in that software"
* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
uvc_v4l2: Simplify compat ioctl implementation
uvc: Forward compat ioctls to their handlers directly
|
|
The uvc compat ioctl implementation seems to have copied user data
for no good reason. Remove a bunch of copies.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
|
|
The current code goes through a lot of indirection just to call a
known handler. Simplify it: just call the handlers directly.
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix regression in fam15h_power driver
- minor variable type fix in lm90 driver
- document compatible statement for ina2xx driver
* tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) use proper type for update_interval
hwmon: (ina2xx) Document compatible for INA231
hwmon: (fam15h_power) Disable preemption when reading registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Two fixes: a regression/crash fix, and a message output fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix the format of EFI debug messages
efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Addresses a false positive warning in the GPU/DRM code"
[ Technically it's not a "false positive", but it's the virtual GPU
interface that needs the frame pointer for its own internal purposes ]
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning
|
|
Pull networking fixes from David Miller:
1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.
2) Revert some msleep conversions in rtlwifi as these spots are in
atomic context, from Larry Finger.
3) Validate that NFTA_SET_TABLE attribute is actually specified when we
call nf_tables_getset(). From Phil Turnbull.
4) Don't do mdio_reset in stmmac driver with spinlock held as that can
sleep, from Vincent Palatin.
5) sk_filter() does things other than run a BPF filter, so we should
not elide it's call just because sk->sk_filter is NULL. Fix from
Eric Dumazet.
6) Fix missing backlog updates in several packet schedulers, from Cong
Wang.
7) bnx2x driver should allow VLAN add/remove while the interface is
down, from Michal Schmidt.
8) Several RDS/TCP race fixes from Sowmini Varadhan.
9) fq_codel scheduler doesn't return correct queue length in dumps,
from Eric Dumazet.
10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
Yuchung Cheng.
11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
from Guillaume Nault.
12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
Westphal.
13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
from Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
vmxnet3: segCnt can be 1 for LRO packets
packet: compat support for sock_fprog
stmmac: fix parameter to dwmac4_set_umac_addr()
net/mlx5e: Fix blue flame quota logic
net/mlx5e: Use ndo_stop explicitly at shutdown flow
net/mlx5: E-Switch, always set mc_promisc for allmulti vports
net/mlx5: E-Switch, Modify node guid on vf set MAC
net/mlx5: E-Switch, Fix vport enable flow
net/mlx5: E-Switch, Use the correct error check on returned pointers
net/mlx5: E-Switch, Use the correct free() function
net/mlx5: Fix E-Switch flow steering capabilities check
net/mlx5: Fix flow steering NIC capabilities check
net/mlx5: Fix root flow table update
net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
net/mlx5: Fix masking of reserved bits in XRCD number
net/mlx5: Fix the size of modify QP mailbox
mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
mlxsw: spectrum: Make split flow match firmware requirements
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
cfg80211: remove get/set antenna and tx power warnings
...
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes:
amdgpu:
Lots of memory leak and firmware leak fixes
nouveau:
Collection of display fixes, KASAN fixes
vc4:
vblank/pageflipping fixes
fsl-dcu:
Regmap cache fix
omap:
Unused variable warning fix.
Nothing too surprising so far"
* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
drm/amdgpu: fix warning with powerplay disabled.
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"A recently introduced boot regression related to the ACPI EC
initialization is addressed by restoring the previous behavior (Lv
Zheng)"
* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Stable-candidate fixes for the intel_pstate driver and the cpuidle
core.
Specifics:
- Fix two intel_pstate initialization issues, one of which was
introduced during the 4.4 cycle (Srinivas Pandruvada)
- Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
(Catalin Marinas)"
* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
|
|
The device emulation may send segCnt of 1 for LRO packets.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Jin Heo <heoj@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr
Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Blue flame is a latency enhancement feature that allows the driver to
write the packet data directly to the NIC's registers thus making the
read of the packet data from host memory redundant.
We maintain a quota for the blue flame which is reloaded whenever we
identify that the hardware is processing send requests and processes
them fast enough so by the time we post the next send request it was
able to process all the pending ones. This indicates that the hardware
is capable of processing more blue flame requests efficiently. The blue
flame quota is decremented whenever we send using blue flame.
The current code erroneously clears the budget if we did not use blue
flame for the current post send operation and we fix it here.
Fixes: 88a85f99e51f ('net/mlx5e: TX latency optimization to save DMA reads')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation copies the flow of ndo_stop instead of
calling it explicitly, Fixed it.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the mc_promisc flag also in the case of adding new mc address to
existing allmulti vport.
Fixes: a35f71f27a61 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In RoCE, the RDMA-CM needs the node guid to establish connection
between nodes.
Today, the node guid exposed to mlx5 Ethernet VFs is zero, therefore
RDMA-CM on the VF is broken.
Whenever the administrator sets a MAC for a VF, derive the node guid
from it and set it as well in the following way:
MAC: e4:1d:2d:b3:f4:01 -> node_guid: e4:1d:2d:ff:fe:b3:f4:01
Fixes: 77256579c6b43 ('net/mlx5: E-Switch, Introduce Vport...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reorder vport enable flow to mark the vport as enabled before calling
the vport change handler which was modified to handle the case for
when vport is not enabled.
This fixes the case for when the PF netdev is open before sriov is
enabled, once sriov is enabled at esw_enable_vport,
esw_vport_change_handle_locked didn't read the PF context since it
thought the PF vport was not enabled.
When we enable the vport, arming for events is not required anymore,
since it's done on the vport change handle
Fixes: 586cfa7f1d58 ('net/mlx5: E-Switch, Use vport event handler for vport cleanup')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx5 flow-steering API (mlx5_create_flow_table/group/rule) never
returns null pointer on error. Even if it was doing that, checking
for IS_ERR_OR_NULL(p) and then returning PTR_ERR(p) would have cause
bugs, since PTR_ERR(NULL) --> success, crash.
To make things more robust and protect against related future bugs,
convert all IS_ERR_OR_NULL checks on returned values to IS_ERR.
Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs')
Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We must use kvfree() for something that could have been allocated with vzalloc(),
do that.
Fixes: 5742df0f7dbe ('net/mlx5: E-Switch, Introduce VST vport ingress/egress ACLs')
Fixes: 86d722ad2c3b ('net/mlx5: Use flow steering infrastructure for mlx5_en')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing capabilities check for E-Switch FDB and ACLs flow
tables before creating their namespace in flow steering.
Fixes: efdc810ba39d ('net/mlx5: Flow steering, Add vport ACL support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flow steering infrastructure is currently used only on link layer
ethernet, therefore the driver should initialize the flow steering
when the device link layer is ethernet.
In addition, add missing capability check before initializing the
namespace of NIC RX flow tables.
Fixes: 2530236303d9 ('net/mlx5_core: Flow steering tree initialization')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we destroy the last flow table we need to update
the root_ft to NULL.
It fixes an issue for when the last flow table is destroyed
and recreated again, root_ft pointer will not be updated,
as a result traffic will be dropped.
Fixes: 2cc43b494a6c ('net/mlx5_core: Managing root flow table')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mask the reserved bits when reading the number of newly
created XRCD.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes
* 'fixes-for-v4.7-rc3' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: use flat regmap cache
|
|
This just fixes a warning when you disable powerplay.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
into drm-fixes
Mostly memory leak and firmware leak fixes for amdgpu. A bit bigger than
usual since this is several weeks worth of fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: (28 commits)
drm/amd/powerplay: delete useless code as pptable changed in vbios.
drm/amd/powerplay: fix bug visit array out of bounds
drm/amdgpu: fix smu ucode memleak (v2)
drm/amdgpu: add release firmware for cgs
drm/amdgpu: fix tonga smu_fini mem leak
drm/amdgpu: fix fiji smu fini mem leak
drm/amdgpu: fix cik sdma ucode memleak
drm/amdgpu: fix sdma24 ucode mem leak
drm/amdgpu: fix sdma3 ucode mem leak
drm/amdgpu: fix uvd fini mem leak
drm/amdgpu: fix gfx 7 ucode mem leak
drm/amdgpu: fix gfx8 ucode mem leak
drm/amdgpu: fix missing free wb for cond_exec
drm/amdgpu: fix memleak in pptable_init
drm/amdgpu: fix mem leak in atombios
drm/amdgpu: fix mem leak in pplib/hwmgr
drm/amdgpu: fix mem leak in smumgr
drm/amdgpu: add pipeline sync while vmid switch in same ctx
drm/amdgpu: vBIOS post only call when mem_size zero
drm/amdgpu: modify sdma start sequence
...
|
|
git://people.freedesktop.org/~robclark/linux into drm-fixes
* 'msm-fixes-4.7-rc3' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix potential submit error path issue
drm/msm: fix some crashes in submit fail path
drm/msm: deal with exhausted vmap space better
|
|
* pm-cpufreq-fixes:
cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
* pm-cpuidle:
cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
|
|
* acpi-ec:
ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"This is the first -rc pull for the RDMA subsystem. The patch count is
high, but they are all smallish patches fixing simple things for the
most part, and the overall line count of changes here is smaller than
the patch count would lead a person to believe.
Code is up and running in my labs, including direct testing of cxgb4,
mlx4, mlx5, ocrdma, and qib.
Summary:
- Multiple minor fixes to the rdma core
- Multiple minor fixes to hfi1
- Multiple minor fixes to mlx5
- A very few other minor fixes (SRP, IPoIB, usNIC, mlx4)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (35 commits)
IB/IPoIB: Don't update neigh validity for unresolved entries
IB/mlx5: Fix alternate path code
IB/mlx5: Fix pkey_index length in the QP path record
IB/mlx5: Fix entries check in mlx5_ib_resize_cq
IB/mlx5: Fix entries checks in mlx5_ib_create_cq
IB/mlx5: Check BlueFlame HCA support
IB/mlx5: Fix returned values of query QP
IB/mlx5: Limit query HCA clock
IB/mlx5: Fix FW version diaplay in sysfs
IB/mlx5: Return PORT_ERR in Active to Initializing tranisition
IB/mlx5: Set flow steering capability bit
IB/core: Make all casts in ib_device_cap_flags enum consistent
IB/core: Fix bit curruption in ib_device_cap_flags structure
IB/core: Initialize sysfs attributes before sysfs create group
IB/IPoIB: Disable bottom half when dealing with device address
IB/core: Fix removal of default GID cache entry
IB/IPoIB: Fix race between ipoib_remove_one to sysfs functions
IB/core: Fix query port failure in RoCE
IB/core: fix error unwind in sysfs hw counters code
IB/core: Fix array length allocation
...
|
|
of_match_table was not filled which prevents device to be
instantiated from device tree node.
Signed-off-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
The NVMe driver only requests the PCIe device's memory regions but releases
all possible regions (including eventual I/O regions). This leads to a stale
warning entry in dmesg about freeing non existent resources.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Remove the warning about a too long SMBUS message because
the ipmi_ssif driver triggers this warning too frequently so it
spams the message log.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
During receive the controller requires the AAK flag for all
bytes but the final one. This was wrong in case of I2C_M_RECV_LEN,
where the decision if the final byte is to be transmitted
happened before adding the additional received length byte.
Set the AAK flag if additional bytes are to be received.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus
PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900:
Device (SBUS)
{
OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10)
Field (SMBI, ByteAcc, NoLock, Preserve)
{
HSTS, 8,
Offset (0x02),
HCON, 8,
HCOM, 8,
TXSA, 8,
DAT0, 8,
DAT1, 8,
HBDR, 8,
PECR, 8,
RXSA, 8,
SDAT, 16
}
There are also bunch of AML methods that that the BIOS can use to access
these fields. Most of the systems in question AML methods accessing the
SMBI OpRegion are never used.
Now, because of this SMBI OpRegion many systems fail to load the SMBus
driver with an error looking like one below:
ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F
conflicts with OpRegion 0x0000000000003040-0x000000000000304F
(\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
The reason is that this SMBI OpRegion conflicts with the PCI BAR used by
the SMBus driver.
It turns out that we can install a custom SystemIO address space handler
for the SMBus device to intercept all accesses through that OpRegion. This
allows us to share the PCI BAR with the AML code if it for some reason is
using it. We do not expect that this OpRegion handler will ever be called
but if it is we print a warning and prevent all access from the SMBus
driver itself.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041
Reported-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@vger.kernel.org
|
|
The function is unflattening device sub-tree blob if @dad passed to
the function is valid. Currently, this functionality is used by PPC
PowerNV PCI hotplug driver only. There are possibly multiple nodes
in the first level of depth, fdt_next_node() bails immediately when
@depth becomes negative before the second device node can be probed
successfully. It leads to the device nodes except the first one won't
be unflattened successfully.
This fixes the issue by setting the initial depth (@inital_depth) to
1 when this function is called to unflatten device sub-tree blob. No
logic changes when this function is used to unflatten non-sub-tree
blob.
Cc: Rhyland Klein <rklein@nvidia.com>
Fixes: 78c44d910 ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Rhyland Klein <rklein@nvidia.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When rtnl_fill_ifinfo() is called for a certain netdevice it queries its
various parameters such as switch id and physical port name. The
function might get called in an atomic context, which means the
underlying driver must not sleep during the query operation.
Don't query the device and sleep during ndo_get_phys_port_name(), but
instead store the needed parameters in port creation time.
Fixes: 2bf9a58675c5 ("mlxsw: spectrum: Add support for physical port names")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a port is created following a split / unsplit we need to map it to
the correct module and lane, enable it and then continue to initialize
its various parameters such as MTU and VLAN filters.
Under certain conditions, such as trying to split ports at the bottom
row of the front panel by four, we get firmware errors.
After evaluating this with the firmware team it was decided to alter the
split / unsplit flow, so that first all the affected ports are mapped,
then enabled and finally each is initialized separately.
Fix the split / unsplit flow by first mapping and enabling all the
affected ports. Newer firmware versions will support both flows.
Fixes: 18f1e70c4137 ("mlxsw: spectrum: Introduce port splitting")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
Konrad writes:
Thishas two fixes for a guest migrating from host that
has multi-queue to one without it (and vice-versa).
|
|
The vbios table changed so this code is useless now.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
