| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf and timer fixes from Ingo Molnar:
"Two small perf fixes:
- kernel side context leak fix
- tooling crash fix
And two clocksource driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix context leak in put_event()
perf annotate: Fix fallback to unparsed disassembler line
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: sun5i: Fix setup_irq init sequence
clocksource: efm32: Fix a NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The two main fixes here from Javier and Doug both fix issues seen on
the Exynos-based ARM Chromebooks with reference counting of GPIO
regulators over system suspend. The GPIO enable code didn't properly
take account of this case (a full analysis is in Doug's commit log).
This is fixed by both fixing the reference counting directly and by
making the resume code skip enables it doesn't need to do. We could
skip the change in the resume code but it's a very simple change and
adds extra robustness against problems in other drivers"
* tag 'regulator-fix-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65910: Add missing #include <linux/of.h>
regulator: core: Fix enable GPIO reference counting
regulator: Only enable disabled regulators on resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A few things here:
- a change from Lars to fix insertion of cache values at the start of
rather than end of a rbtree block. This hadn't been noticed before
since almost everything lists registers in ascending order.
- a fix from Takashi for spurious warnings during cache sync with
read once registers, a problem which can be very noticeable on
devices that it affects.
- a fix from Valentin for a tighening of the oneshot IRQ request
interface which would have broken affected devices"
* tag 'regmap-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache-rbtree: Fix present bitmap resize
regmap: Skip read-only registers in regcache_sync()
regmap-irq: set IRQF_ONESHOT flag to ensure IRQ request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio fixes from Rusty Russell:
"Not entirely surprising: the ongoing QEMU work on virtio 1.0 has
revealed more minor issues with our virtio 1.0 drivers just introduced
in the kernel.
(I would normally use my fixes branch for this, but there were a batch
of them...)"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_mmio: fix access width for mmio
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio_mmio: generation support
virtio_rpmsg: set DRIVER_OK before using device
9p/trans_virtio: fix hot-unplug
virtio-balloon: do not call blocking ops when !TASK_RUNNING
virtio_blk: fix comment for virtio 1.0
virtio_blk: typo fix
virtio_balloon: set DRIVER_OK before using device
virtio_console: avoid config access from irq
virtio_console: init work unconditionally
|
|
Going over the virtio mmio code, I noticed that it doesn't correctly
access modern device config values using "natural" accessors: it uses
readb to get/set them byte by byte, while the virtio 1.0 spec explicitly states:
4.2.2.2 Driver Requirements: MMIO Device Register Layout
...
The driver MUST only use 32 bit wide and aligned reads and writes to
access the control registers described in table 4.1.
For the device-specific configuration space, the driver MUST use
8 bit wide accesses for 8 bit wide fields, 16 bit wide and aligned
accesses for 16 bit wide fields and 32 bit wide and aligned accesses for
32 and 64 bit wide fields.
Borrow code from virtio_pci_modern to do this correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
'regulator/fix/tps65910' into regulator-linus
|
|
drivers/regulator/tps65910-regulator.c: In function ‘tps65910_parse_dt_reg_data’:
drivers/regulator/tps65910-regulator.c:1018: error: implicit declaration of function ‘of_get_child_by_name’
drivers/regulator/tps65910-regulator.c:1018: warning: assignment makes pointer from integer without a cast
drivers/regulator/tps65910-regulator.c:1034: error: implicit declaration of function ‘of_node_put’
drivers/regulator/tps65910-regulator.c:1056: error: implicit declaration of function ‘of_property_read_u32’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull drm fix from Dave Airlie:
"An oops snuck in in an -rc3 patch, this fixes it"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
[PATCH] drm/mm: Fix support 4 GiB and larger ranges
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clock framework fixes from Michael Turquette:
"The clk fixes for 4.0-rc4 comprise three themes.
First are the usual driver fixes for new regressions since v3.19.
Second are fixes to the common clock divider type caused by recent
changes to how we round clock rates. This affects many clock drivers
that use this common code.
Finally there are fixes for drivers that improperly compared struct
clk pointers (drivers must not deref these pointers). While some of
these drivers have done this for a long time, this did not cause a
problem until we started generating unique struct clk pointers for
every consumer. A new function, clk_is_match was introduced to get
these drivers working again and they are fixed up to no longer deref
the pointers themselves"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
ASoC: kirkwood: fix struct clk pointer comparing
ASoC: fsl_spdif: fix struct clk pointer comparing
ARM: imx: fix struct clk pointer comparing
clk: introduce clk_is_match
clk: don't export static symbol
clk: divider: fix calculation of initial best divider when rounding to closest
clk: divider: fix selection of divider when rounding to closest
clk: divider: fix calculation of maximal parent rate for a given divider
clk: divider: return real rate instead of divider value
clk: qcom: fix platform_no_drv_owner.cocci warnings
clk: qcom: fix platform_no_drv_owner.cocci warnings
clk: qcom: Add PLL4 vote clock
clk: qcom: lcc-msm8960: Fix PLL rate detection
clk: qcom: Fix slimbus n and m val offsets
clk: ti: Fix FAPLL parent enable bit handling
|
|
bad argument if(tmp)... in check_free_hole
fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305!
[airlied: excellent, this was my task for today].
Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Reviewed-by: Chris wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pull irqchip fixes from Jason Cooper:
"armada-370-xp:
- Chained per-cpu interrupts
gic{,-v3,v3-its}"
- Various fixes for safer operation"
* tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux:
irqchip: gicv3-its: Support safe initialization
irqchip: gicv3-its: Define macros for GITS_CTLR fields
irqchip: gicv3-its: Add limitation to page order
irqchip: gicv3-its: Use 64KB page as default granule
irqchip: gicv3-its: Zero itt before handling to hardware
irqchip: gic-v3: Fix out of bounds access to cpu_logical_map
irqchip: gic: Fix unsafe locking reported by lockdep
irqchip: gicv3-its: Fix unsafe locking reported by lockdep
irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration
irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID
irqchip: gicv3-its: Fix ITS CPU init
irqchip: armada-370-xp: Fix chained per-cpu interrupts
|
|
|
|
Pull drm fixes from Dave Airlie:
"Misc i915, vmwgfx and radeon fixes along with a fix for one of those
recursive sleep mutex debug cases in the mst code"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix an issue with the device losing its irq line on module unload
drm/vmwgfx: Correctly NULLify dma buffer pointer on failure
drm/vmwgfx: Reorder device takedown somewhat
drm/vmwgfx: Fix a couple of lock dependency violations
drm/radeon: drop setting UPLL to sleep mode
drm/radeon: fix wait to actually occur after the signaling callback
drm/i915: Prevent TLB error on first execution on SNB
drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
drm/i915: use in_interrupt() not in_irq() to check context
drm/mst: fix recursive sleep warning on qlock
drm: Don't assign fbs for universal cursor support to files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"This is a simple fix for a domain revalidation crash which has
recently turned up in the libsas code (applies to mvsas, isc and
aic94xx)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
libsas: Fix Kernel Crash in smp_execute_task
|
|
Pull VFIO fix from Alex Williamson:
"Add missing break to avoid clobbering ioctl (Alexey Kardashevskiy)"
* tag 'vfio-v4.0-rc4' of git://github.com/awilliam/linux-vfio:
vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Just two fixes, one for an ACPI LPSS driver issue introduced during
the 3.17 cycle and one revert of a recent commit that sort of broke
the cpupower tool.
Specifics:
- Fix an ACPI LPSS (Low-Power Subsystem) driver issue causing the
8250_dw driver to confuse an LPSS clock with another one it is
supposed to handle due to the lack of identification allowing it to
tell those clocks apart (Heikki Krogerus).
- Revert a recent commit that was supposed to improve the usability
of the cpupower tool, but clearly did the opposite (Josh Boyer)"
* tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpupower Makefile change to help run the tool without 'make install'"
ACPI / LPSS: provide con_id for the clkdev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- fix a PV regression in 3.19.
- fix a dom0 crash on hosts with large numbers of PIRQs.
- prevent pcifront from disabling memory or I/O port access, which may
trigger host crashes.
* tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: limit guest control of command register
xen/events: avoid NULL pointer dereference in dom0 on large machines
xen: Remove trailing semicolon from xenbus_register_frontend() definition
x86/xen: correct bug in p2m list initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix for stdout-path option parsing with added unittest
- fix for stdout-path interaction with earlycon
- several DT unittest fixes
- fix Sparc allmodconfig build error on of_platform_register_reconfig_notifier
- several DT overlay kconfig and build warning fixes
- several DT binding documentation updates
* tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/platform: Fix sparc:allmodconfig build
of: unittest: Add options string testcase variants
of: fix handling of '/' in options for of_find_node_by_path()
of/unittest: Fix the wrong expected value in of_selftest_property_string
of/unittest: remove the duplicate of_changeset_init
dt: submitting-patches: clarify that DT maintainers are to be cced on bindings
of: unittest: fix I2C dependency
of/overlay: Remove unused variable
Documentation: DT: Renamed of-serial.txt to 8250.txt
of: Fix premature bootconsole disable with 'stdout-path'
serial: add device tree binding documentation for ETRAX FS UART
of/overlay: Directly include idr.h
of: Drop superfluous dependance for OF_OVERLAY
of: Add vendor prefix for Arasan
of: Add prompt for OF_OVERLAY config
|
|
Pull gadgetfs fixes from Al Viro:
"Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles
caused by ->f_op flipping"
* 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gadgetfs: really get rid of switching ->f_op
gadgetfs: get rid of flipping ->f_op in ep_config()
gadget: switch ep_io_operations to ->read_iter/->write_iter
gadgetfs: use-after-free in ->aio_read()
gadget/function/f_fs.c: switch to ->{read,write}_iter()
gadget/function/f_fs.c: use put iov_iter into io_data
gadget/function/f_fs.c: close leaks
move iov_iter.c from mm/ to lib/
new helper: dup_iter()
|
|
virtio_mmio currently lacks generation support which
makes multi-byte field access racy.
Fix by getting the value at offset 0xfc for version 2
devices. Nothing we can do for version 1, so return
generation id 0.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
virtio spec requires that all drivers set DRIVER_OK
before using devices. While rpmsg isn't yet
included in the virtio 1 spec, previous spec versions
also required this.
virtio rpmsg violates this rule: is calls kick
before setting DRIVER_OK.
The fix isn't trivial since simply calling virtio_device_ready earlier
would mean we might get an interrupt in parallel with adding buffers.
Instead, split kick out to prepare+notify calls. prepare before
virtio_device_ready - when we know we won't get interrupts. notify right
afterwards.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
added an "rtc_src" DT property to specify the clock used as a source to
the S3C real-time clock.
Not all SoCs needs this so commit eaf3a659086e ("drivers/rtc/rtc-s3c.c:
fix initialization failure without rtc source clock") changed to check
the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock.
But that commit didn't update the data for each IP version so the RTC
broke on the boards that needs a source clock. This is the case of at
least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block.
This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420
Peach Pit and Pi Chromebooks.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Tyler Baker <tyler.baker@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
into drm-fixes
Some additional radeon fixes for 4.0
* 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: drop setting UPLL to sleep mode
drm/radeon: fix wait to actually occur after the signaling callback
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes for vmwgfx.
* 'vmwgfx-fixes-4.0' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Fix an issue with the device losing its irq line on module unload
drm/vmwgfx: Correctly NULLify dma buffer pointer on failure
drm/vmwgfx: Reorder device takedown somewhat
drm/vmwgfx: Fix a couple of lock dependency violations
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
More i915 fixes, three out of four are fixes to old bugs, cc: stable.
* tag 'drm-intel-fixes-2015-03-12' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Prevent TLB error on first execution on SNB
drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
drm/i915: use in_interrupt() not in_irq() to check context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An important bugfix for the I2C subsystem core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: core: Dispose OF IRQ mapping at client removal time"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are a couple updates for v4.0.
One fixes a config accessor problem on APM X-Gene that we introduced
when switching to generic config accessors, and the other fixes an
older read-past-end-of-buffer problem in sysfs.
APM X-Gene host bridge driver
- Add register offset to config space base address (Feng Kan)
Miscellaneous
- Don't read past the end of sysfs "driver_override" buffer (Sasha Levin)"
* tag 'pci-v4.0-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: xgene: Add register offset to config space base address
PCI: Don't read past the end of sysfs "driver_override" buffer
|
|
This adds a missing break statement to VFIO_DEVICE_SET_IRQS handler
without which vfio_pci_set_err_trigger() would never be called.
While we are here, add another "break" to VFIO_PCI_REQ_IRQ_INDEX case
so if we add more indexes later, we won't miss it.
Fixes: 6140a8f56238 ("vfio-pci: Add device request interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This reverts commit e4df3a0b6228
("i2c: core: Dispose OF IRQ mapping at client removal time")
Calling irq_dispose_mapping() will destroy the mapping and disassociate
the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because
existent mappings are reused properly.
Also, this commit breaks drivers using devm* for IRQ management on
OF-based systems because devm* cleanup happens in device code, after
bus's remove() method returns.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[wsa: updated the commit message with findings fromt the other bug report]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fixes: e4df3a0b6228
|
|
Some drivers compare struct clk pointers as a means of knowing
if the two pointers reference the same clock hardware. This behavior is
dubious (drivers must not dereference struct clk), but did not cause any
regressions until the per-user struct clk patch was merged. Now the test
for matching clk's will always fail with per-user struct clk's.
clk_is_match is introduced to fix the regression and prevent drivers
from comparing the pointers manually.
Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances")
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: const arguments to clk_is_match() and
remove unnecessary ternary operation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@
-EXPORT_SYMBOL_GPL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Starting with commit b4b55cda5874
("x86/PCI: Refine the way to release PCI IRQ resources")
the device lost its irq resource on module unload. While that's ok and
apparently intentional, the driver never got the resource back on module load
The code apparently wants drivers to disable the pci device at pci device
driver removal, so lets do that. That fixes the issue.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
|
|
cppcheck on lines 917 and 977 show an ineffective assignment
to the dma buffer pointer:
[drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:917]:
[drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:977]:
(warning) Assignment of function parameter has no effect
outside the function. Did you forget dereferencing it?
On a successful DMA buffer lookup, the dma buffer pointer is
assigned, however, on failure it currently is left in an
undefined state.
The original intention in the error exit path was to nullify
the pointer on an error (which the original code failed to
do properly). This patch fixes this also ensures all failure
paths nullify the buffer pointer on the error return.
Fortunately the callers to vmw_translate_mob_ptr and
vmw_translate_guest_ptr are checking on a return status and not
on the dma buffer pointer, so the original code worked.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
|
|
To take down the MOB and GMR memory types, the driver may have to issue
fence objects and thus make sure that the fence manager is taken down
after those memory types.
Reorder device init accordingly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
|
|
Experimental lockdep annotation added to the TTM lock has unveiled a
couple of lock dependency violations in the vmwgfx driver. In both
cases it turns out that the device_private::reservation_sem is not
needed so the offending code is moved out of that lock.
Cc: <stable@vger.kernel.org>
Acked-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.
Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.
This is CVE-2015-2150 / XSA-120.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
|
|
Just keep it working, seems to fix some PLL problems.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
A normal wait adds to the front of the tail. By doing something
similar to fence_default_wait the fence code can run without racing.
This is a complete fix for "panic on suspend from KDE with radeon",
and a partial fix for "Radeon: System pauses on TAHITI". On tahiti
si_irq_set needs to be fixed too, to completely flush the writes
before radeon_fence_activity is called in radeon_fence_enable_signaling.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90741
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90861
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Reported-by: Jon Arne Jørgensen <jonjon.arnearne@gmail.com>
Reported-and-tested-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Cc: stable@vger.kernel.org (v3.18+)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull MTD fixes from Brian Norris:
* pxa3xx_nand
- fix timeout issues when draining the FIFO (BCH only)
- don't crash when no chip-selects are used
* hisi504_nand
- depend on HAS_DMA, to fix compile errors
* tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd:
mtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA
mtd: pxa3xx_nand: fix driver when num_cs is 0
mtd: nand: pxa3xx: Fix PIO FIFO draining
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"The patches contain:
- fix multiple ARM IOMMU drivers to behave well when the hardware is
not present
- mark MSM driver as broken
- fix build errors with the new ARM generic io-page-table code"
* tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/io-pgtable-arm: Add built time dependency
iommu/msm: Mark driver BROKEN
iommu/rockchip: Play nice in multi-platform builds
iommu/omap: Play nice in multi-platform builds
iommu/exynos: Play nice in multi-platform builds
iommu/io-pgtable-arm: Fix self-test WARNs on i386
|
|
Add testcase variants with '/' in the options string to test for
scan beyond end path name terminated by ':'.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Ensure proper handling of paths with appended options (after ':'),
where those options may contain a '/'.
Fixes: 7914a7c5651a ("of: support passing console options with stdout-path")
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch fix the wrong expected value of of_property_match_string
in of_selftest_property_string.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the duplicate of_changeset_init. In of_selftest_changeset
testcase, the "struct of_changeset chgset" is initialized twice,
but only once is enough. so, drop the first initializtion code.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The unittest fails to link if I2C or I2C_MUX is a loadable module:
drivers/built-in.o: In function `selftest_i2c_mux_remove':
unittest.c:(.text+0xb0ce4): undefined reference to `i2c_del_mux_adapter'
This changes the newly added IS_ENABLED() checks to use IS_BUILTIN()
instead, which evaluates to false if the other driver is a module.
Reported-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d5e75500ca401 ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 3e7f7626fd49a ("of/overlay: Do not generate duplicate nodes") removed
the only use of the 'grandchild' variable, which leads to the following build
warning:
drivers/of/overlay.c: In function 'of_overlay_apply_single_device_node':
drivers/of/overlay.c:89:31: warning: unused variable 'grandchild' [-Wunused-variable]
struct device_node *tchild, *grandchild;
^
Remove this unused variable.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Support for devicetree serial consoles via 'stdout-path' causes
bootconsoles to be disabled when the vt dummy console loads, since
there is no preferred console (the preferred console is not added
until the device is probed).
Ensure there is at least a preferred console, even if never matched.
Requires: "console: Fix console name size mismatch"
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Linux 4.0-rc3
Merging in v4.0-rc3 because commit 30a22c215a00 (console: Fix
console name size mismatch) is a dependency.
|
|
Long ago I found that I was getting sporadic errors when booting SNB,
with the symptom being that the first batch died with IPEHR != *ACTHD,
typically caused by the TLB being invalid. These magically disappeared
if I held the forcewake during the entire ring initialisation sequence.
(It can probably be shortened to a short critical section, but the whole
initialisation is full of register writes and so we would be taking and
releasing forcewake almost continually, and so holding it over the
entire sequence will probably be a net win!)
Note some of the kernels I encounted the issue already had the deferred
forcewake release, so it is still relevant.
I know that there have been a few other reports with similar failure
conditions on SNB, I think such as
References: https://bugs.freedesktop.org/show_bug.cgi?id=80913
v2: Wrap i915_gem_init_hw() with its own security blanket as we take
that path following resume and reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
commit 05a2fb157e44 ("drm/i915: Consolidate forcewake code")
failed to take into account that we have used to reset both
the gen6 style and the multithreaded style forcewake registers.
This is due to fact that ivb can use either, depending on how the
bios has set up the machine.
Mimic the old semantics before we have determined the correct variety
and reset both before the ecobus probe.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
