| Age | Commit message (Collapse) | Author |
|---|
|
Move some block device related code out from buffer.c and put it in
block_dev.c. I'm trying to move non-buffer_head code out of buffer.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Nick Piggin noticed this (very unlikely) race between setting a page
dirty and creating the buffers for it - we need to hold the mapping
private_lock until we've set the page dirty bit in order to make sure
that create_empty_buffers() might not build up a set of buffers without
the dirty bits set when the page is dirty.
I doubt anybody has ever hit this race (and it didn't solve the issue
Nick was looking at), but as Nick says: "Still, it does appear to solve
a real race, which we should close."
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list
block: fix booting from partitioned md array
block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb
cciss: PCI power management reset for kexec
paride/pg.c: xs(): &&/|| confusion
fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free
block: fix bad definition of BIO_RW_SYNC
bsg: Fix sense buffer bug in SG_IO
|
|
YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for
cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty).
Additionally, there is some inconsistency about when task_dirty_inc is
called. It is used for dirty balancing, however it even gets called for
__set_page_dirty_no_writeback.
So rather than increment it in a set_page_dirty wrapper, move it down to
exactly where the dirty page accounting stats are incremented.
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The above commit added WRITE_SYNC and switched various places to using
that for committing writes that will be waited upon immediately after
submission. However, this causes a performance regression with AS and CFQ
for ext3 at least, since sync_dirty_buffer() will submit some writes with
WRITE_SYNC while ext3 has sumitted others dependent writes without the sync
flag set. This causes excessive anticipation/idling in the IO scheduler
because sync and async writes get interleaved, causing a big performance
regression for the below test case (which is meant to simulate sqlite
like behaviour).
---- test case ----
int main(int argc, char **argv)
{
int fdes, i;
FILE *fp;
struct timeval start;
struct timeval end;
struct timeval res;
gettimeofday(&start, NULL);
for (i=0; i<ROWS; i++) {
fp = fopen("test_file", "a");
fprintf(fp, "Some Text Data\n");
fdes = fileno(fp);
fsync(fdes);
fclose(fp);
}
gettimeofday(&end, NULL);
timersub(&end, &start, &res);
fprintf(stdout, "time to write %d lines is %ld(msec)\n", ROWS,
(res.tv_sec*1000000 + res.tv_usec)/1000);
return 0;
}
-------------------
Thanks to Sean.White@APCC.com for tracking down this performance
regression and providing a test case.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu>
nobh_write_end() could call attach_nobh_buffers() with head == NULL.
This would result in a trap when attach_nobh_buffers() attempted to
access bh->b_this_page.
This can be illustrated by running the writev01 testcase from LTP on jfs.
This error was introduced by commit 5b41e74a "vfs: fix data leak in
nobh_write_end()". That patch did not take into account that if
PageMappedToDisk() is true upon entry to nobh_write_begin(), then no
buffers will be allocated for the page. In that case, we won't have to
worry about a failed write leaving unitialized data in the page.
Of course, head != NULL implies !page_has_buffers(page), so no need to
test both.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Dmitri Monakhov <dmonakhov@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The ioctls for the generic freeze feature are below.
o Freeze the filesystem
int ioctl(int fd, int FIFREEZE, arg)
fd: The file descriptor of the mountpoint
FIFREEZE: request code for the freeze
arg: Ignored
Return value: 0 if the operation succeeds. Otherwise, -1
o Unfreeze the filesystem
int ioctl(int fd, int FITHAW, arg)
fd: The file descriptor of the mountpoint
FITHAW: request code for unfreeze
arg: Ignored
Return value: 0 if the operation succeeds. Otherwise, -1
Error number: If the filesystem has already been unfrozen,
errno is set to EINVAL.
[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, ext3 in mainline Linux doesn't have the freeze feature which
suspends write requests. So, we cannot take a backup which keeps the
filesystem's consistency with the storage device's features (snapshot and
replication) while it is mounted.
In many case, a commercial filesystem (e.g. VxFS) has the freeze feature
and it would be used to get the consistent backup.
If Linux's standard filesystem ext3 has the freeze feature, we can do it
without a commercial filesystem.
So I have implemented the ioctls of the freeze feature.
I think we can take the consistent backup with the following steps.
1. Freeze the filesystem with the freeze ioctl.
2. Separate the replication volume or create the snapshot
with the storage device's feature.
3. Unfreeze the filesystem with the unfreeze ioctl.
4. Take the backup from the separated replication volume
or the snapshot.
This patch:
VFS:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they can return an error.
Rename write_super_lockfs and unlockfs of the super block operation
freeze_fs and unfreeze_fs to avoid a confusion.
ext3, ext4, xfs, gfs2, jfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that write_super_lockfs returns an error if needed,
and unlockfs always returns 0.
reiserfs:
Changed the type of write_super_lockfs and unlockfs from "void"
to "int" so that they always return 0 (success) to keep a current behavior.
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allow the scsi request REQ_QUIET flag to be propagated to the buffer
file system layer. The basic ideas is to pass the flag from the scsi
request to the bio (block IO) and then to the buffer layer. The buffer
layer can then suppress needless printks.
This patch declutters the kernel log by removed the 40-50 (per lun)
buffer io error messages seen during a boot in my multipath setup . It
is a good chance any real errors will be missed in the "noise" it the
logs without this patch.
During boot I see blocks of messages like
"
__ratelimit: 211 callbacks suppressed
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242847
Buffer I/O error on device sdm, logical block 1
Buffer I/O error on device sdm, logical block 5242878
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242872
"
in my logs.
My disk environment is multipath fiber channel using the SCSI_DH_RDAC
code and multipathd. This topology includes an "active" and "ghost"
path for each lun. IO's to the "ghost" path will never complete and the
SCSI layer, via the scsi device handler rdac code, quick returns the IOs
to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi
layer messages.
I am wanting to extend the QUIET behavior to include the buffer file
system layer to deal with these errors as well. I have been running this
patch for a while now on several boxes without issue. A few runs of
bonnie++ show no noticeable difference in performance in my setup.
Thanks for John Stultz for the quiet_error finalization.
Submitted-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
udf_clear_inode() can leave behind buffers on mapping's i_private list (when
we truncated preallocation). Call invalidate_inode_buffers() so that the list
is properly cleaned-up before we return from udf_clear_inode(). This is ugly
and suggest that we should cleanup preallocation earlier than in clear_inode()
but currently there's no such call available since drop_inode() is called under
inode lock and thus is unusable for disk operations.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
trylock_buffer and unlock_buffer open and close a critical section.
Hence, we can use the lock bitops to get the desired memory ordering.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reported by Milan Broz <mbroz@redhat.com>, commit 18ce3751 inadvertently
made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix
that up.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too
many places and too long to really be inlined. Size results:
text data bss dec hex filename
1134606 118840 212992 1466438 166046 vmlinux.old
1134303 118840 212992 1466135 165f17 vmlinux
-303 0 0 -303 -12F +/-
This patch is part of the Linux Tiny project and has been originally
written by Matt Mackall <mpm@selenic.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.
I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment. Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.
So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate. This can
reduce read IO and improve system throughput.
I wrote a benchmark program and got result number with this program.
This benchmark do:
1: mount and open a test file.
2: create a 512MB file.
3: close a file and umount.
4: mount and again open a test file.
5: pwrite randomly 300000 times on a test file. offset is aligned
by IO size(1024bytes).
6: measure time of preading randomly 100000 times on a test file.
The result was:
2.6.26
330 sec
2.6.26-patched
226 sec
Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB
On ext3/4, a file is written through buffer/block. So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment. This test result
showed this.
The benchmark program is as follows:
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#define LEN 1024
#define LOOP 1024*512 /* 512MB */
main(void)
{
unsigned long i, offset, filesize;
int fd;
char buf[LEN];
time_t t1, t2;
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
memset(buf, 0, LEN);
fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
for (i = 0; i < LOOP; i++)
write(fd, buf, LEN);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
fd = open("/root/test1/testfile", O_RDWR);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
filesize = LEN * LOOP;
for (i = 0; i < 300000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pwrite(fd, buf, LEN, offset);
}
printf("start test\n");
time(&t1);
for (i = 0; i < 100000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pread(fd, buf, LEN, offset);
}
time(&t2);
printf("%ld sec\n", t2-t1);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
}
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mapping->tree_lock has no read lockers. convert the lock from an rwlock
to a spinlock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
arch/powerpc/Kconfig
arch/s390/kernel/time.c
arch/x86/kernel/apic_32.c
arch/x86/kernel/cpu/perfctr-watchdog.c
arch/x86/kernel/i8259_64.c
arch/x86/kernel/ldt.c
arch/x86/kernel/nmi_64.c
arch/x86/kernel/smpboot.c
arch/x86/xen/smp.c
include/asm-x86/hw_irq_32.h
include/asm-x86/hw_irq_64.h
include/asm-x86/mach-default/irq_vectors.h
include/asm-x86/mach-voyager/irq_vectors.h
include/asm-x86/smp.h
kernel/Makefile
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Export mpage_bio_submit() and __mpage_writepage() for the benefit of
ext4's delayed allocation support. Also change __block_write_full_page
so that if buffers that have the BH_Delay flag set it will call
get_block() to get the physical block allocated, just as in the
!BH_Mapped case.
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
There's no need to call mark_inode_dirty() under page lock in
generic_write_end(). It unnecessarily makes hold time of page lock longer
and more importantly it forces locking order of page lock and transaction
start for journaling filesystems.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
fsync_buffers_list() and sync_dirty_buffer() both issue async writes and
then immediately wait on them. Conceptually, that makes them sync writes
and we should treat them as such so that the IO schedulers can handle
them appropriately.
This patch fixes a write starvation issue that Lin Ming reported, where
xx is stuck for more than 2 minutes because of a large number of
synchronous IO in the system:
INFO: task kjournald:20558 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kjournald D ffff810010820978 6712 20558 2
ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2
ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb
0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537
Call Trace:
[<ffffffff803ba6f2>] kobject_get+0x12/0x17
[<ffffffff80247537>] getnstimeofday+0x2f/0x83
[<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
[<ffffffff8066d195>] io_schedule+0x5d/0x9f
[<ffffffff8029c1e7>] sync_buffer+0x3b/0x3f
[<ffffffff8066d3f0>] __wait_on_bit+0x40/0x6f
[<ffffffff8029c1ac>] sync_buffer+0x0/0x3f
[<ffffffff8066d48b>] out_of_line_wait_on_bit+0x6c/0x78
[<ffffffff80243909>] wake_bit_function+0x0/0x23
[<ffffffff8029e3ad>] sync_dirty_buffer+0x98/0xcb
[<ffffffff8030056b>] journal_commit_transaction+0x97d/0xcb6
[<ffffffff8023a676>] lock_timer_base+0x26/0x4b
[<ffffffff8030300a>] kjournald+0xc1/0x1fb
[<ffffffff802438db>] autoremove_wake_function+0x0/0x2e
[<ffffffff80302f49>] kjournald+0x0/0x1fb
[<ffffffff802437bb>] kthread+0x47/0x74
[<ffffffff8022de51>] schedule_tail+0x28/0x5d
[<ffffffff8020cac8>] child_rip+0xa/0x12
[<ffffffff80243774>] kthread+0x0/0x74
[<ffffffff8020cabe>] child_rip+0x0/0x12
Lin Ming confirms that this patch fixes the issue. I've run tests with
it for the past week and no ill effects have been observed, so I'm
proposing it for inclusion into 2.6.26.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
It's not even passed on to smp_call_function() anymore, since that
was removed. So kill it.
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cont_expand_zero() can become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the obsolete and no longer used generic_commit_write().
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On the systems, ftruncate() which expand size for FAT became the cause
of OOM. The cont_expand_zero() filled all memory with dirty pages,
and since disk is very slow, limit of page scanning was exceeded, then
it triggered OOM.
This adds balance_dirty_pages_ratelimited() to avoid filling memory
with dirty pages.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The MPOL_BIND policy creates a zonelist that is used for allocations
controlled by that mempolicy. As the per-node zonelist is already being
filtered based on a zone id, this patch adds a version of __alloc_pages() that
takes a nodemask for further filtering. This eliminates the need for
MPOL_BIND to create a custom zonelist.
A positive benefit of this is that allocations using MPOL_BIND now use the
local node's distance-ordered zonelist instead of a custom node-id-ordered
zonelist. I.e., pages will be allocated from the closest allowed node with
available memory.
[Lee.Schermerhorn@hp.com: Mempolicy: update stale documentation and comments]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask]
[Lee.Schermerhorn@hp.com: Mempolicy: make dequeue_huge_page_vma() obey MPOL_BIND nodemask rework]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Filtering zonelists requires very frequent use of zone_idx(). This is costly
as it involves a lookup of another structure and a substraction operation. As
the zone_idx is often required, it should be quickly accessible. The node idx
could also be stored here if it was found that accessing zone->node is
significant which may be the case on workloads where nodemasks are heavily
used.
This patch introduces a struct zoneref to store a zone pointer and a zone
index. The zonelist then consists of an array of these struct zonerefs which
are looked up as necessary. Helpers are given for accessing the zone index as
well as the node index.
[kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers]
[hugh@veritas.com: mm-have-zonelist: fix memcg ooms]
[hugh@veritas.com: just return do_try_to_free_pages]
[hugh@veritas.com: do_try_to_free_pages gfp_mask redundant]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently a node has two sets of zonelists, one for each zone type in the
system and a second set for GFP_THISNODE allocations. Based on the zones
allowed by a gfp mask, one of these zonelists is selected. All of these
zonelists consume memory and occupy cache lines.
This patch replaces the multiple zonelists per-node with two zonelists. The
first contains all populated zones in the system, ordered by distance, for
fallback allocations when the target/preferred node has no free pages. The
second contains all populated zones in the node suitable for GFP_THISNODE
allocations.
An iterator macro is introduced called for_each_zone_zonelist() that interates
through each zone allowed by the GFP flags in the selected zonelist.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce a node_zonelist() helper function. It is used to lookup the
appropriate zonelist given a node and a GFP mask. The patch on its own is a
cleanup but it helps clarify parts of the two-zonelist-per-node patchset. If
necessary, it can be merged with the next patch in this set without problems.
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following patches replace multiple zonelists per node with two zonelists
that are filtered based on the GFP flags. The patches as a set fix a bug with
regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the
MPOL_BIND will apply to the two highest zones when the highest zone is
ZONE_MOVABLE. This should be considered as an alternative fix for the
MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters
only custom zonelists.
The first patch cleans up an inconsistency where direct reclaim uses
zonelist->zones where other places use zonelist.
The second patch introduces a helper function node_zonelist() for looking up
the appropriate zonelist for a GFP mask which simplifies patches later in the
set.
The third patch defines/remembers the "preferred zone" for numa statistics, as
it is no longer always the first zone in a zonelist.
The forth patch replaces multiple zonelists with two zonelists that are
filtered. The two zonelists are due to the fact that the memoryless patchset
introduces a second set of zonelists for __GFP_THISNODE.
The fifth patch introduces helper macros for retrieving the zone and node
indices of entries in a zonelist.
The final patch introduces filtering of the zonelists based on a nodemask.
Two zonelists exist per node, one for normal allocations and one for
__GFP_THISNODE.
Performance results varied depending on the machine configuration. In real
workloads the gain/loss will depend on how much the userspace portion of the
benchmark benefits from having more cache available due to reduced referencing
of zonelists.
These are the range of performance losses/gains when running against
2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and
ppc64 both NUMA and non-NUMA.
loss to gain
Total CPU time on Kernbench: -0.86% to 1.13%
Elapsed time on Kernbench: -0.79% to 0.76%
page_test from aim9: -4.37% to 0.79%
brk_test from aim9: -0.71% to 4.07%
fork_test from aim9: -1.84% to 4.60%
exec_test from aim9: -0.71% to 1.08%
This patch:
The allocator deals with zonelists which indicate the order in which zones
should be targeted for an allocation. Similarly, direct reclaim of pages
iterates over an array of zones. For consistency, this patch converts direct
reclaim to use a zonelist. No functionality is changed by this patch. This
simplifies zonelist iterators in the next patch.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Migrate flags must be set on slab creation as agreed upon when the antifrag
logic was reviewed. Otherwise some slabs of a slabcache will end up in the
unmovable and others in the reclaimable section depending on which flag was
active when a new slab page was allocated.
This likely slid in somehow when antifrag was merged. Remove it.
The buffer_heads are always allocated with __GFP_RECLAIMABLE because the
SLAB_RECLAIM_ACCOUNT option is set. The set_migrateflags() never had any
effect there.
Radix tree allocations are not directly reclaimable but they are allocated
with __GFP_RECLAIMABLE set on each allocation. We now set
SLAB_RECLAIM_ACCOUNT on radix tree slab creation making sure that radix
tree slabs are consistently placed in the reclaimable section. Radix tree
slabs will also be accounted as such.
There is then no user left of set_migratepages. So remove it.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mikulas Patocka noted that the optimization where we check if a buffer
was already dirty (and we avoid re-dirtying it) was not really SMP-safe.
Since the read of the old status was not synchronized with anything, an
aggressive CPU re-ordering of memory accesses might have moved that read
up to before the data was even written to the buffer, and another CPU
that cleaned it again, causing the newly dirty state to never actually
hit the disk.
Admittedly this would probably never trigger in practice, but it's still
wrong.
Mikulas sent a patch that fixed the problem, but I dislike the subtlety
of the whole optimization, so this is an alternate fix that is more
explicit about the particular SMP ordering for the optimization, and
separates out the speculative reads of the buffer state into its own
conditional (and makes the memory barrier only happen if we are likely
to actually hit the optimized case in the first place).
I considered removing the optimization entirely, but Andrew argued for
it's continued existence. I'm a push-over.
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Current nobh_write_end() implementation ignore partial writes(copied < len)
case if page was fully mapped and simply mark page as Uptodate, which is
totally wrong because area [pos+copied, pos+len) wasn't updated explicitly in
previous write_begin call. It simply contains garbage from pagecache and
result in data leakage.
#TEST_CASE_BEGIN:
~~~~~~~~~~~~~~~~
In fact issue triggered by classical testcase
open("/mnt/test", O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
ftruncate(3, 409600) = 0
writev(3, [{"a", 1}, {NULL, 4095}], 2) = 1
##TESTCASE_SOURCE:
~~~~~~~~~~~~~~~~~
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <errno.h>
int main(int argc, char **argv)
{
int fd, ret;
void* p;
struct iovec iov[2];
fd = open(argv[1], O_RDWR|O_CREAT|O_TRUNC, 0666);
ftruncate(fd, 409600);
iov[0].iov_base="a";
iov[0].iov_len=1;
iov[1].iov_base=NULL;
iov[1].iov_len=4096;
ret = writev(fd, iov, sizeof(iov)/sizeof(struct iovec));
printf("writev = %d, err = %d\n", ret, errno);
return 0;
}
##TESTCASE RESULT:
~~~~~~~~~~~~~~~~~~
[root@ts63 ~]# mount | grep mnt2
/dev/mapper/test on /mnt2 type ext2 (rw,nobh)
[root@ts63 ~]# /tmp/writev /mnt2/test
writev = 1, err = 0
[root@ts63 ~]# hexdump -C /mnt2/test
00000000 61 65 62 6f 6f 74 00 00 f0 b9 b4 59 3a 00 00 00 |aeboot.....Y:...|
00000010 20 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 | .......!.......|
00000020 df df df df df df df df df df df df df df df df |................|
00000030 3a 00 00 00 2a 00 00 00 21 00 00 00 00 00 00 00 |:...*...!.......|
00000040 60 c0 8c 00 00 00 00 00 40 4a 8d 00 00 00 00 00 |`.......@J......|
00000050 00 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 |........A.......|
00000060 74 69 6d 65 20 64 64 20 69 66 3d 2f 64 65 76 2f |time dd if=/dev/|
00000070 6c 6f 6f 70 30 20 20 6f 66 3d 2f 64 65 76 2f 6e |loop0 of=/dev/n|
skip..
00000f50 00 00 00 00 00 00 00 00 31 00 00 00 00 00 00 00 |........1.......|
00000f60 6d 6b 66 73 2e 65 78 74 33 20 2f 64 65 76 2f 76 |mkfs.ext3 /dev/v|
00000f70 7a 76 67 2f 74 65 73 74 20 2d 62 34 30 39 36 00 |zvg/test -b4096.|
00000f80 a0 fe 8c 00 00 00 00 00 21 00 00 00 00 00 00 00 |........!.......|
00000f90 23 31 32 30 35 39 35 30 34 30 34 00 3a 00 00 00 |#1205950404.:...|
00000fa0 20 00 8d 00 00 00 00 00 21 00 00 00 00 00 00 00 | .......!.......|
00000fb0 d0 cf 8c 00 00 00 00 00 10 d0 8c 00 00 00 00 00 |................|
00000fc0 00 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 |........A.......|
00000fd0 6d 6f 75 6e 74 20 2f 64 65 76 2f 76 7a 76 67 2f |mount /dev/vzvg/|
00000fe0 74 65 73 74 20 20 2f 76 7a 20 2d 6f 20 64 61 74 |test /vz -o dat|
00000ff0 61 3d 77 72 69 74 65 62 61 63 6b 00 00 00 00 00 |a=writeback.....|
00001000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
As you can see file's page contains garbage from pagecache instead of zeros.
#TEST_CASE_END
Attached patch:
- Add sanity check BUG_ON in order to prevent incorrect usage by caller,
This is function invariant because page can has buffers and in no zero
*fadata pointer at the same time.
- Always attach buffers to page is it is partial write case.
- Always switch back to generic_write_end if page has buffers.
This is reasonable because if page already has buffer then generic_write_begin
was called previously.
Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Reviewed-by: Nick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc notation warnings in fs/.
Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line:
* mark_files_ro
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line:
* lookup_one_len: filesystem helper to lookup single pathname component
Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line:
* bh_uptodate_or_lock: Test whether the buffer is uptodate
Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line:
* bh_submit_read: Submit a locked buffer for reading
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line:
* writeback_acquire: attempt to get exclusive writeback access to a device
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line:
* writeback_in_progress: determine whether there is writeback in progress
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line:
* writeback_release: relinquish exclusive writeback access against a device.
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections
Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line:
* void journal_invalidatepage()
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix NULL pointer dereference in fsync_buffers_list() introduced by recent fix
of races in private_list handling. Since bh->b_assoc_map has been cleared in
__remove_assoc_queue() we should really use original value stored in the
'mapping' variable.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix docbook problems in filesystems.tmpl.
These cause the generated docbook to be incorrect.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two possible races in handling of private_list in buffer cache.
1) When fsync_buffers_list() processes a private_list, it clears
b_assoc_mapping and moves buffer to its private list. Now
drop_buffers() comes, sees a buffer is on list so it calls
__remove_assoc_queue() which complains about b_assoc_mapping being
cleared (as it cannot propagate possible IO error). This race has been
actually observed in the wild.
2) When fsync_buffers_list() processes a private_list,
mark_buffer_dirty_inode() can be called on bh which is already on the
private list of fsync_buffers_list(). As buffer is on some list (note
that the check is performed without private_lock), it is not readded to
the mapping's private_list and after fsync_buffers_list() finishes, we
have a dirty buffer which should be on private_list but it isn't. This
race has not been reported, probably because most (but not all) callers
of mark_buffer_dirty_inode() hold i_mutex and thus are serialized with
fsync().
Fix these issues by not clearing b_assoc_map when fsync_buffers_list()
moves buffer to a dedicated list and by reinserting buffer in private_list
when it is found dirty after we have submitted buffer for IO. We also
change the tests whether a buffer is on a private list from
!list_empty(&bh->b_assoc_buffers) to bh->b_assoc_map so that they are
single word reads and hence lockless checks are safe.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a rewrite of the ramdisk block device driver.
The old one is really difficult because it effectively implements a block
device which serves data out of its own buffer cache. It relies on the dirty
bit being set, to pin its backing store in cache, however there are non
trivial paths which can clear the dirty bit (eg. try_to_free_buffers()),
which had recently lead to data corruption. And in general it is completely
wrong for a block device driver to do this.
The new one is more like a regular block device driver. It has no idea about
vm/vfs stuff. It's backing store is similar to the buffer cache (a simple
radix-tree of pages), but it doesn't know anything about page cache (the pages
in the radix tree are not pagecache pages).
There is one slight downside -- direct block device access and filesystem
metadata access goes through an extra copy and gets stored in RAM twice.
However, this downside is only slight, because the real buffercache of the
device is now reclaimable (because we're not playing crazy games with it), so
under memory intensive situations, footprint should effectively be the same --
maybe even a slight advantage to the new driver because it can also reclaim
buffer heads.
The fact that it now goes through all the regular vm/fs paths makes it
much more useful for testing, too.
text data bss dec hex filename
2837 849 384 4070 fe6 drivers/block/rd.o
3528 371 12 3911 f47 drivers/block/brd.o
Text is larger, but data and bss are smaller, making total size smaller.
A few other nice things about it:
- Similar structure and layout to the new loop device handlinag.
- Dynamic ramdisk creation.
- Runtime flexible buffer head size (because it is no longer part of the
ramdisk code).
- Boot / load time flexible ramdisk size, which could easily be extended
to a per-ramdisk runtime changeable size (eg. with an ioctl).
- Can use highmem for the backing store.
[akpm@linux-foundation.org: fix build]
[byron.bbradley@gmail.com: make rd_size non-static]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The constructor for buffer_head slabs was removed recently. We need the
constructor back in slab defrag in order to insure that slab objects always
have a definite state even before we allocated them.
I think we mistakenly merged the removal of the constuctor into a cleanup
patch. You (ie: akpm) had a test that showed that the removal of the
constructor led to a small regression. The prior state makes things easier
for slab defrag.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Simplify page cache zeroing of segments of pages through 3 functions
zero_user_segments(page, start1, end1, start2, end2)
Zeros two segments of the page. It takes the position where to
start and end the zeroing which avoids length calculations and
makes code clearer.
zero_user_segment(page, start, end)
Same for a single segment.
zero_user(page, start, length)
Length variant for the case where we know the length.
We remove the zero_user_page macro. Issues:
1. Its a macro. Inline functions are preferable.
2. The KM_USER0 macro is only defined for HIGHMEM.
Having to treat this special case everywhere makes the
code needlessly complex. The parameter for zeroing is always
KM_USER0 except in one single case that we open code.
Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.
Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.
Also extract the flushing of the caches to be outside of the kmap.
[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add buffer head related helper function bh_uptodate_or_lock and
bh_submit_read which can be used by file system
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
This path mustn't have been tested :( I did attempt to exercise it
by injecting failures here, but I suspect PageMappedToDisk may have
been getting in the way. Will need more of a look, although I think
nobh mode is OK for an -rc1 (it shouldn't eat anyone's data).
Commit 03158cd7eb3374843de68421142ca5900df845d9 ("fs: restore nobh")
introcduced a NULL deref. Spotted by the Coverity checker.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Miklos Szeredi <miklos@szeredi.hu> and me identified a writeback bug:
> The following strange behavior can be observed:
>
> 1. large file is written
> 2. after 30 seconds, nr_dirty goes down by 1024
> 3. then for some time (< 30 sec) nothing happens (disk idle)
> 4. then nr_dirty again goes down by 1024
> 5. repeat from 3. until whole file is written
>
> So basically a 4Mbyte chunk of the file is written every 30 seconds.
> I'm quite sure this is not the intended behavior.
It can be produced by the following test scheme:
# cat bin/test-writeback.sh
grep nr_dirty /proc/vmstat
echo 1 > /proc/sys/fs/inode_debug
dd if=/dev/zero of=/var/x bs=1K count=204800&
while true; do grep nr_dirty /proc/vmstat; sleep 1; done
# bin/test-writeback.sh
nr_dirty 19207
nr_dirty 19207
nr_dirty 30924
204800+0 records in
204800+0 records out
209715200 bytes (210 MB) copied, 1.58363 seconds, 132 MB/s
nr_dirty 47150
nr_dirty 47141
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47205
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47215
nr_dirty 47216
nr_dirty 47216
nr_dirty 47216
nr_dirty 47154
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47134
nr_dirty 47134
nr_dirty 47135
nr_dirty 47135
nr_dirty 47135
nr_dirty 46097 <== -1038
nr_dirty 46098
nr_dirty 46098
nr_dirty 46098
[...]
nr_dirty 46091
nr_dirty 46092
nr_dirty 46092
nr_dirty 45069 <== -1023
nr_dirty 45056
nr_dirty 45056
nr_dirty 45056
[...]
nr_dirty 37822
nr_dirty 36799 <== -1023
[...]
nr_dirty 36781
nr_dirty 35758 <== -1023
[...]
nr_dirty 34708
nr_dirty 33672 <== -1024
[...]
nr_dirty 33692
nr_dirty 32669 <== -1023
% ls -li /var/x
847824 -rw-r--r-- 1 root root 200M 2007-08-12 04:12 /var/x
% dmesg|grep 847824 # generated by a debug printk
[ 529.263184] redirtied inode 847824 line 548
[ 564.250872] redirtied inode 847824 line 548
[ 594.272797] redirtied inode 847824 line 548
[ 629.231330] redirtied inode 847824 line 548
[ 659.224674] redirtied inode 847824 line 548
[ 689.219890] redirtied inode 847824 line 548
[ 724.226655] redirtied inode 847824 line 548
[ 759.198568] redirtied inode 847824 line 548
# line 548 in fs/fs-writeback.c:
543 if (wbc->pages_skipped != pages_skipped) {
544 /*
545 * writeback is not making progress due to locked
546 * buffers. Skip this inode for now.
547 */
548 redirty_tail(inode);
549 }
More debug efforts show that __block_write_full_page()
never has the chance to call submit_bh() for that big dirty file:
the buffer head is *clean*. So basicly no page io is issued by
__block_write_full_page(), hence pages_skipped goes up.
Also the comment in generic_sync_sb_inodes():
544 /*
545 * writeback is not making progress due to locked
546 * buffers. Skip this inode for now.
547 */
and the comment in __block_write_full_page():
1713 /*
1714 * The page was marked dirty, but the buffers were
1715 * clean. Someone wrote them back by hand with
1716 * ll_rw_block/submit_bh. A rare case.
1717 */
do not quite agree with each other. The page writeback should be skipped for
'locked buffer', but here it is 'clean buffer'!
This patch fixes this bug. Though I'm not sure why __block_write_full_page()
is called only to do nothing and who actually issued the writeback for us.
This is the two possible new behaviors after the patch:
1) pretty nice: wait 30s and write ALL:)
2) not so good:
- during the dd: ~16M
- after 30s: ~4M
- after 5s: ~4M
- after 5s: ~176M
The next patch will fix case (2).
Cc: David Chinner <dgc@sgi.com>
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Count per BDI reclaimable pages; nr_reclaimable = nr_dirty + nr_unstable.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
