summaryrefslogtreecommitdiff
path: root/fs/dlm
AgeCommit message (Collapse)Author
2016-10-10dlm: free workqueues after the connectionsMarcelo Ricardo Leitner
After backporting commit ee44b4bc054a ("dlm: use sctp 1-to-1 API") series to a kernel with an older workqueue which didn't use RCU yet, it was noticed that we are freeing the workqueues in dlm_lowcomms_stop() too early as free_conn() will try to access that memory for canceling the queued works if any. This issue was introduced by commit 0d737a8cfd83 as before it such attempt to cancel the queued works wasn't performed, so the issue was not present. This patch fixes it by simply inverting the free order. Cc: stable@vger.kernel.org Fixes: 0d737a8cfd83 ("dlm: fix race while closing connections") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-08-26dlm: fix malfunction of dlm_tool caused by debugfs changesEric Ren
With the current kernel, `dlm_tool lockdebug` fails as below: "dlm_tool lockdebug ED0BD86DCE724393918A1AE8FDBF1EE3 can't open /sys/kernel/debug/dlm/ED0BD86DCE724393918A1AE8FDBF1EE3: Operation not permitted" This is because table_open() depends on file->f_op to tell which seq_file ops should be passed down. But, the original file ops in file->f_op is replaced by "debugfs_full_proxy_file_operations" with commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"). Currently, I can think up 2 solutions: 1st, replace debugfs_create_file() with debugfs_create_file_unsafe(); 2nd, make different table_open#() accordingly. The 1st one is neat, but I don't thoroughly understand its risk. Maybe someone has a better one. Signed-off-by: Eric Ren <zren@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-06-23dlm: Use kmemdup instead of kmalloc and memcpyAmitoj Kaur Chawla
Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. The Coccinelle semantic patch used to make this change is as follows: @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-06-21dlm: add log_info config optionZhilong Liu
This config option can be used to disable the LOG_INFO recovery messages. Signed-off-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-29dlm: config: Fix ENOMEM failures in make_cluster()Andrew Price
Commit 1ae1602de0 "configfs: switch ->default groups to a linked list" left the NULL gps pointer behind after removing the kcalloc() call which made it non-NULL. It also left the !gps check in place so make_cluster() now fails with ENOMEM. Remove the remaining uses of the gps variable to fix that. Reviewed-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-03-17Merge tag 'dlm-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "Previous changes introduced the use of socket error reporting for dlm sockets. This set includes two fixes in how the socket error callbacks are used" * tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: DLM: Save and restore socket callbacks properly DLM: Replace nodeid_to_addr with kernel_getpeername
2016-03-06configfs: switch ->default groups to a linked listChristoph Hellwig
Replace the current NULL-terminated array of default groups with a linked list. This gets rid of lots of nasty code to size and/or dynamically allocate the array. While we're at it also provide a conveniant helper to remove the default groups. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget] Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
2016-02-22DLM: Save and restore socket callbacks properlyBob Peterson
This patch fixes the problems with patch b3a5bbfd7. 1. It removes a return statement from lowcomms_error_report because it needs to call the original error report in all paths through the function. 2. All socket callbacks are saved and restored, not just the sk_error_report, and that's done so with proper locking like sunrpc does. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-02-22DLM: Replace nodeid_to_addr with kernel_getpeernameBob Peterson
This patch replaces the call to nodeid_to_addr with a call to kernel_getpeername. This avoids taking a spinlock because it may potentially be called from a softirq context. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-01-21[regression] fix braino in fs/dlm/user.cAl Viro
it's "bugger off if we got ERR_PTR", not the other way round... Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-14Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series contains HCH's changes to absorb configfs attribute ->show() + ->store() function pointer usage from it's original tree-wide consumers, into common configfs code. It includes usb-gadget, target w/ drivers, netconsole and ocfs2 changes to realize the improved simplicity, that now renders the original include/target/configfs_macros.h CPP magic for fabric drivers and others, unnecessary and obsolete. And with common code in place, new configfs attributes can be added easier than ever before. Note, there are further improvements in-flight from other folks for v4.5 code in configfs land, plus number of target fixes for post -rc1 code" In the meantime, a new user of the now-removed old configfs API came in through the char/misc tree in commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices"). This merge resolution comes from Alexander Shishkin, who updated his stm class tracing abstraction to account for the removal of the old show_attribute and store_attribute methods in commit 517982229f78 ("configfs: remove old API") from this pull. As Alexander says about that patch: "There's no need to keep an extra wrapper structure per item and the awkward show_attribute/store_attribute item ops are no longer needed. This patch converts policy code to the new api, all the while making the code quite a bit smaller and easier on the eyes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>" That patch was folded into the merge so that the tree should be fully bisectable. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits) configfs: remove old API ocfs2/cluster: use per-attribute show and store methods ocfs2/cluster: move locking into attribute store methods netconsole: use per-attribute show and store methods target: use per-attribute show and store methods spear13xx_pcie_gadget: use per-attribute show and store methods dlm: use per-attribute show and store methods usb-gadget/f_serial: use per-attribute show and store methods usb-gadget/f_phonet: use per-attribute show and store methods usb-gadget/f_obex: use per-attribute show and store methods usb-gadget/f_uac2: use per-attribute show and store methods usb-gadget/f_uac1: use per-attribute show and store methods usb-gadget/f_mass_storage: use per-attribute show and store methods usb-gadget/f_sourcesink: use per-attribute show and store methods usb-gadget/f_printer: use per-attribute show and store methods usb-gadget/f_midi: use per-attribute show and store methods usb-gadget/f_loopback: use per-attribute show and store methods usb-gadget/ether: use per-attribute show and store methods usb-gadget/f_acm: use per-attribute show and store methods usb-gadget/f_hid: use per-attribute show and store methods ...
2015-11-05Merge tag 'dlm-4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm update from David Teigland: "This includes one simple fix to make posix locks interruptible by signals in cases where a signal handler is used" * tag 'dlm-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: make posix locks interruptible
2015-11-03dlm: make posix locks interruptibleEric Ren
Replace wait_event_killable with wait_event_interruptible so that a program waiting for a posix lock can be interrupted by a signal. With the killable version, a program was not interruptible by a signal if it had a signal handler set for it, overriding the default action of terminating the process. Signed-off-by: Eric Ren <zren@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-10-22Move locks API users to locks_lock_inode_wait()Benjamin Coddington
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct locks API function, use the check within locks_lock_inode_wait(). This allows for some later cleanup. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-14dlm: use per-attribute show and store methodsChristoph Hellwig
To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Teigland <teigland@redhat.com Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-03Merge tag 'dlm-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This set mainly includes a change to the way the dlm uses the SCTP API in the kernel, removing the direct dependency on the sctp module. Other odd SCTP-related fixes are also included. The other notable fix is for a long standing regression in the behavior of lock value blocks for user space locks" * tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: print error from kernel_sendpage dlm: fix lvb copy for user locks dlm: sctp_accept_from_sock() can be static dlm: fix reconnecting but not sending data dlm: replace BUG_ON with a less severe handling dlm: use sctp 1-to-1 API dlm: fix not reconnecting on connecting error handling dlm: fix race while closing connections dlm: fix connection stealing if using SCTP
2015-08-27dlm: print error from kernel_sendpageBob Peterson
Print a dlm-specific error when a socket error occurs when sending a dlm message. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-25dlm: fix lvb copy for user locksDavid Teigland
For a userland lock request, the previous and current lock modes are used to decide when the lvb should be copied back to the user. The wrong previous value was used, so that it always matched the current value. This caused the lvb to be copied back to the user in the wrong cases. Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: sctp_accept_from_sock() can be statickbuild test robot
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: fix reconnecting but not sending dataMarcelo Ricardo Leitner
There are cases on which lowcomms_connect_sock() is called directly, which caused the CF_WRITE_PENDING flag to not bet set upon reconnect, specially on send_to_sock() error handling. On this last, the flag was already cleared and no further attempt on transmitting would be done. As dlm tends to connect when it needs to transmit something, it makes sense to always mark this flag right after the connect. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: replace BUG_ON with a less severe handlingMarcelo Ricardo Leitner
BUG_ON() is a severe action for this case, specially now that DLM with SCTP will use 1 socket per association. Instead, we can just close the socket on this error condition and return from the function. Also move the check to an earlier stage as it won't change and thus we can abort as soon as possible. Although this issue was reported when still using SCTP with 1-to-many API, this cleanup wouldn't be that simple back then because we couldn't close the socket and making sure such event would cease would be hard. And actually, previous code was closing the association, yet SCTP layer is still raising the new data event. Probably a bug to be fixed in SCTP. Reported-by: <tan.hu@zte.com.cn> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: use sctp 1-to-1 APIMarcelo Ricardo Leitner
DLM is using 1-to-many API but in a 1-to-1 fashion. That is, it's not needed but this causes it to use sctp_do_peeloff() to mimic an kernel_accept() and this causes a symbol dependency on sctp module. By switching it to 1-to-1 API we can avoid this dependency and also reduce quite a lot of SCTP-specific code in lowcomms.c. The caveat is that now DLM won't always use the same src port. It will choose a random one, just like TCP code. This allows the peers to attempt simultaneous connections, which now are handled just like for TCP. Even more sharing between TCP and SCTP code on DLM is possible, but it is intentionally left for a later commit. Note that for using nodes with this commit, you have to have at least the early fixes on this patchset otherwise it will trigger some issues on old nodes. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: fix not reconnecting on connecting error handlingMarcelo Ricardo Leitner
If we don't clear that bit, lowcomms_connect_sock() will not schedule another attempt, and no further attempt will be done. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: fix race while closing connectionsMarcelo Ricardo Leitner
When a connection have issues DLM may need to close it. Therefore we should also cancel pending workqueues for such connection at that time, and not just when dlm is not willing to use this connection anymore. Also, if we don't clear CF_CONNECT_PENDING flag, the error handling routines won't be able to re-connect as lowcomms_connect_sock() will check for it. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-17dlm: fix connection stealing if using SCTPMarcelo Ricardo Leitner
When using SCTP and accepting a new connection, DLM currently validates if the peer trying to connect to it is one of the cluster nodes, but it doesn't check if it already has a connection to it or not. If it already had a connection, it will be overwritten, and the new one will be used for writes, possibly causing the node to leave the cluster due to communication breakage. Still, one could DoS the node by attempting N connections and keeping them open. As said, but being explicit, both situations are only triggerable from other cluster nodes, but are doable with only user-level perms. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2015-08-05char: make misc_deregister a void functionGreg Kroah-Hartman
With well over 200+ users of this api, there are a mere 12 users that actually checked the return value of this function. And all of them really didn't do anything with that information as the system or module was shutting down no matter what. So stop pretending like it matters, and just return void from misc_deregister(). If something goes wrong in the call, you will get a WARNING splat in the syslog so you know how to fix up your driver. Other than that, there's nothing that can go wrong. Cc: Alasdair Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-11net: Add a struct net parameter to sock_create_kernEric W. Biederman
This is long overdue, and is part of cleaning up how we allocate kernel sockets that don't reference count struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-11-19dlm: adopt orphan locksDavid Teigland
A process may exit, leaving an orphan lock in the lockspace. This adds the capability for another process to acquire the orphan lock. Acquiring the orphan just moves the lock from the orphan list onto the acquiring process's list of locks. An adopting process must specify the resource name and mode of the lock it wants to adopt. If a matching lock is found, the lock is moved to the caller's 's list of locks, and the lkid of the lock is returned like the lkid of a new lock. If an orphan with a different mode is found, then -EAGAIN is returned. If no orphan lock is found on the resource, then -ENOENT is returned. No async completion is used because the result is immediately available. Also, when orphans are purged, allow a zero nodeid to refer to the local nodeid so the caller does not need to look up the local nodeid. Signed-off-by: David Teigland <teigland@redhat.com>
2014-11-05dlm: Use seq_puts() instead of seq_printf() for constant stringsJoe Perches
Convert the seq_printf output with constant strings to seq_puts. Link: http://lkml.kernel.org/p/b416b016f4a6e49115ba736cad6ea2709a8bc1c4.1412031505.git.joe@perches.com Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: cluster-devel@redhat.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-05dlm: Remove seq_printf() return checks and use seq_has_overflowed()Joe Perches
The seq_printf() return is going away soon and users of it should check seq_has_overflowed() to see if the buffer is full and will not accept any more data. Convert functions returning int to void where seq_printf() is used. Link: http://lkml.kernel.org/p/43590057bcb83846acbbcc1fe641f792b2fb7773.1412031505.git.joe@perches.com Link: http://lkml.kernel.org/r/20141029220107.939492048@goodmis.org Acked-by: David Teigland <teigland@redhat.com> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: cluster-devel@redhat.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-14dlm: fix missing endian conversion of rcom_status flagsNeale Ferguson
The flags are already converted to le when being sent, but are not being converted back to cpu when received. Signed-off-by: Neale Ferguson <neale@sinenomine.net> Signed-off-by: David Teigland <teigland@redhat.com>
2014-09-09locks: Remove unused conf argument from lm_grantJoe Perches
This argument is always NULL so don't pass it around. [jlayton: remove dependencies on previous patches in series] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@primarydata.com>
2014-08-08fs/dlm/debug_fs.c: remove unnecessary null test before debugfs_removeFabian Frederick
This fixes checkpatch warning: WARNING: debugfs_remove(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-12dlm: keep listening connection alive with sctp modeLidong Zhong
The connection struct with nodeid 0 is the listening socket, not a connection to another node. The sctp resend function was not checking that the nodeid was valid (non-zero), so it would mistakenly get and resend on the listening connection when nodeid was zero. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2014-06-06fs/dlm/debug_fs.c: replace seq_printf by seq_putsFabian Frederick
Replace seq_printf where possible. This patch also fixes the following checkpatch warning "unnecessary whitespace before a quoted newline" Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06fs/dlm/lockspace.c: convert simple_str to kstrFabian Frederick
Replace obsolete functions. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06fs/dlm/config.c: convert simple_str to kstrFabian Frederick
Replace obsolete functions simple_strtoul/kstrtouint simple_strtol/kstrtoint (kstr __must_check requires the right function to be applied) Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14dlm: use INFO for recovery messagesDavid Teigland
The log messages relating to the progress of recovery are minimal and very often useful. Change these to the KERN_INFO level so they are always available. Signed-off-by: David Teigland <teigland@redhat.com>
2014-02-12fs: Include appropriate header file in dlm/ast.cRashika Kheria
Include appropriate header file fs/dlm/ast.h in fs/dlm/ast.c because it contains function prototypes of some functions defined in fs/dlm/ast.c. This also eliminates the following warning in fs/dlm/ast: fs/dlm/ast.c:52:5: warning: no previous prototype for ‘dlm_add_lkb_callback’ [-Wmissing-prototypes] fs/dlm/ast.c:113:5: warning: no previous prototype for ‘dlm_rem_lkb_callback’ [-Wmissing-prototypes] fs/dlm/ast.c:174:6: warning: no previous prototype for ‘dlm_add_cb’ [-Wmissing-prototypes] fs/dlm/ast.c:212:6: warning: no previous prototype for ‘dlm_callback_work’ [-Wmissing-prototypes] fs/dlm/ast.c:267:5: warning: no previous prototype for ‘dlm_callback_start’ [-Wmissing-prototypes] fs/dlm/ast.c:278:6: warning: no previous prototype for ‘dlm_callback_stop’ [-Wmissing-prototypes] fs/dlm/ast.c:284:6: warning: no previous prototype for ‘dlm_callback_suspend’ [-Wmissing-prototypes] fs/dlm/ast.c:292:6: warning: no previous prototype for ‘dlm_callback_resume’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David Teigland <teigland@redhat.com>
2014-02-12dlm: silence a harmless use after free warningDan Carpenter
We pass the freed "r" pointer back to the caller. It's harmless but it upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Teigland <teigland@redhat.com>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-22sctp: remove macros sctp_{lock|release}_sockwangweidong
Redefined {lock|release}_sock to sctp_{lock|release}_sock for user space friendly code which we haven't use in years, so removing them. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-16dlm: set zero linger time on sctp socketDongmao Zhang
The recovery time for a failed node was taking a long time because the failed node could not perform the full shutdown process. Removing the linger time speeds this up. The dlm does not care what happens to messages to or from the failed node. Signed-off-by: Dongmao Zhang <dmzhang@suse.com> Signed-off-by: David Teigland <teigland@redhat.com>
2013-11-19genetlink: only pass array to genl_register_family_with_ops()Johannes Berg
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>