summaryrefslogtreecommitdiff
path: root/fs/dlm
AgeCommit message (Collapse)Author
2008-04-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: linux/{dlm,dlm_device}.h: cleanup for userspace dlm: common max length definitions dlm: move plock code from gfs2 dlm: recover nodes that are removed and re-added dlm: save master info after failed no-queue request dlm: make dlm_print_rsb() static dlm: match signedness between dlm_config_info and cluster_set
2008-04-21dlm: common max length definitionsDavid Teigland
Add central definitions for max lockspace name length and max resource name length. The lack of central definitions has resulted in scattered private definitions which we can now clean up, including an unused one in dlm_device.h. Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: move plock code from gfs2David Teigland
Move the code that handles cluster posix locks from gfs2 into the dlm so that it can be used by both gfs2 and ocfs2. Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: recover nodes that are removed and re-addedDavid Teigland
If a node is removed from a lockspace, and then added back before the dlm is notified of the removal, the dlm will not detect the removal and won't clear the old state from the node. This is fixed by using a list of added nodes so the membership recovery can detect when a newly added node is already in the member list. Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: save master info after failed no-queue requestDavid Teigland
When a NOQUEUE request fails, the rsb res_master field is unnecessarily reset to -1, instead of leaving the valid master setting in place. We want to save the looked-up master values while the rsb is on the "toss list" so that another lookup can be avoided if the rsb is soon reused. The fix is to simply leave res_master value alone. Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: make dlm_print_rsb() staticAdrian Bunk
dlm_print_rsb() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21dlm: match signedness between dlm_config_info and cluster_setHarvey Harrison
cluster_set is only called from the macro CLUSTER_ATTR which defines read/write access functions. Make the signedness match to avoid sparse warnings every time CLUSTER_ATTR is used (lines 149-159) all of the form: fs/dlm/config.c:149:1: warning: incorrect type in argument 3 (different signedness) fs/dlm/config.c:149:1: expected unsigned int *info_field fs/dlm/config.c:149:1: got int extern [toplevel] *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-19fs: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-02-21dlm: fix rcom_names message to selfDavid Teigland
The recent patch to validate data lengths in rcom_names messages failed to account for fake messages a node directs to itself before ever sending it. In this case we need to fill in the message length in the header for the validation code to use. Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-07dlm: add __init and __exit marks to init and exit functionsDenis Cheng
it moves 365 bytes from .text to .init.text, and 30 bytes from .text to .exit.text, saves memory. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-07dlm: eliminate astparam type castingDavid Teigland
Put lkb_astparam in a union with a dlm_user_args pointer to eliminate a lot of type casting. Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-06dlm: proper types for asts and bastsDavid Teigland
Use proper types for ast and bast functions, and use consistent type for ast param. Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: dlm/user.c input validation fixesAl Viro
a) in device_write(): add sentinel NUL byte, making sure that lspace.name will be NUL-terminated b) in compat_input() be keep it simple about the amounts of data we are copying. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: fix dlm_dir_lookup() handling of too long namesAl Viro
... those can happen and BUG() from DLM_ASSERT() in allocate_direntry() is not a good way to handle them. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: fix overflows when copying from ->m_extra to lvbAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: make find_rsb() fail gracefully when namelen is too largeAl Viro
We *can* get there from receive_request() and dlm_recover_master_copy() with namelen too large if incoming request is invalid; BUG() from DLM_ASSERT() in allocate_rsb() is a bit excessive reaction to that and in case of dlm_recover_master_copy() we would actually oops before that while calculating hash of up to 64Kb worth of data - with data actually being 64 _bytes_ in kmalloc()'ed struct. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: receive_rcom_lock_args() overflow checkAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: verify that places expecting rcom_lock have packet long enoughAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: validate data in dlm_recover_directory()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: missing length check in check_config()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: use proper type for ->ls_recover_bufAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: do not byteswap rcom_configAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: do not byteswap rcom_lockAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: dlm_process_incoming_buffer() fixesAl Viro
* check that length is large enough to cover the non-variable part of message or rcom resp. (after checking that it's large enough to cover the header, of course). * kill more pointless casts Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-02-04dlm: use proper C for dlm/requestqueue stuff (and fix alignment bug)Al Viro
a) don't cast the pointer to dlm_header *, we use it as dlm_message * anyway. b) we copy the message into a queue element, then pass the pointer to copy to dlm_receive_message_saved(); declare it properly to make sure that we have the right alignment. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: static initialization improvementsDenis Cheng
also change name_prefix from char pointer to char array. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: clean upsDavid Teigland
A couple small clean-ups. Remove unnecessary wrapper-functions in rcom.c, and remove unnecessary casting and an unnecessary ASSERT in util.c. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: Sanity check namelen before copying itPatrick Caulfeld
The 32/64 compatibility code in the DLM does not check the validity of the lock name length passed into it, so it can easily overwrite memory if the value is rubbish (as early versions of libdlm can cause with unlock calls, it doesn't zero the field). This patch restricts the length of the name to the amount of data actually passed into the call. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: keep cached master rsbs during recoveryDavid Teigland
To prevent the master of an rsb from changing rapidly, an unused rsb is kept on the "toss list" for a period of time to be reused. The toss list was being cleared completely for each recovery, which is unnecessary. Much of the benefit of the toss list can be maintained if nodes keep rsb's in their toss list that they are the master of. These rsb's need to be included when the resource directory is rebuilt during recovery. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: change error message to debugDavid Teigland
The invalid lockspace messages are normal and can appear relatively often. They should be suppressed without debugging enabled. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: fix possible use-after-freeDavid Teigland
The dlm_put_lkb() can free the lkb and its associated ua structure, so we can't depend on using the ua struct after the put. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: limit dir lookup loopDavid Teigland
In a rare case we may need to repeat a local resource directory lookup due to a race with removing the rsb and removing the resdir record. We'll never need to do more than a single additional lookup, though, so the infinite loop around the lookup can be removed. In addition to being unnecessary, the infinite loop is dangerous since some other unknown condition may appear causing the loop to never break. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: reject normal unlock when lock is waiting for lookupDavid Teigland
Non-forced unlocks should be rejected if the lock is waiting on the rsb_lookup list for another lock to establish the master node. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: validate messages before processingDavid Teigland
There was some hit and miss validation of messages that has now been cleaned up and unified. Before processing a message, the new validate_message() function checks that the lkb is the appropriate type, process-copy or master-copy, and that the message is from the correct nodeid for the the given lkb. Other checks and assertions on the lkb type and nodeid have been removed. The assertions were particularly bad since they would panic the machine instead of just ignoring the bad message. Although other recent patches have made processing old message unlikely, it still may be possible for an old message to be processed and caught by these checks. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: reject messages from non-membersDavid Teigland
Messages from nodes that are no longer members of the lockspace should be ignored. When nodes are removed from the lockspace, recovery can sometimes complete quickly enough that messages arrive from a removed node after recovery has completed. When processed, these messages would often cause an error message, and could in some cases change some state, causing problems. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: another call to confirm_master in receive_request_replyDavid Teigland
When a failed request (EBADR or ENOTBLK) is unlocked/canceled instead of retried, there may be other lkb's waiting on the rsb_lookup list for it to complete. A call to confirm_master() is needed to move on to the next waiting lkb since the current one won't be retried. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: recover locks waiting for overlap repliesDavid Teigland
When recovery looks at locks waiting for replies, it fails to consider locks that have already received a reply for their first remote operation, but not received a reply for secondary, overlapping unlock/cancel. The appropriate stub reply needs to be called for these waiters. Appears when we start doing recovery in the presence of a many overlapping unlock/cancel ops. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: clear ast_type when removing from astqueueDavid Teigland
The lkb_ast_type field indicates whether the lkb is on the astqueue list. When clearing locks for a process, lkb's were being removed from the astqueue list without clearing the field. If release_lockspace then happened immediately afterward, it could try to remove the lkb from the list a second time. Appears when process calls libdlm dlm_release_lockspace() which first closes the ls dev triggering clear_proc_locks, and then removes the ls (a write to control dev) causing release_lockspace(). Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: use fixed errno values in messagesDavid Teigland
Some errno values differ across platforms. So if we return things like -EINPROGRESS from one node it can get misinterpreted or rejected on another one. This patch fixes up the errno values passed on the wire so that they match the x86 ones (so as not to break the protocol), and re-instates the platform-specific ones at the other end. Many thanks to Fabio for testing this patch. Initial patch from Patrick. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: swap bytes for rcom lock replyFabio M. Di Nitto
DLM_RCOM_LOCK_REPLY messages need byte swapping. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: align midcomms message bufferFabio M. Di Nitto
gcc does not guarantee that an auto buffer is 64bit aligned. This change allows sparc64 to work. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: close otherconsPatrick Caulfeld
This patch addresses a problem introduced with the last round of lowcomms patches where the 'othercon' connections do not get freed when the DLM shuts down. This results in the error message "slab error in kmem_cache_destroy(): cache `dlm_conn': Can't free all objects" and the DLM cannot be restarted without a system reboot. See bz#428119 Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: use dlm prefix on alloc and free functionsDavid Teigland
The dlm functions in memory.c should use the dlm_ prefix. Also, use kzalloc/kfree directly for dlm_direntry's, removing the wrapper functions. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: don't print common non-errorsDavid Teigland
Change log_error() to log_debug() for conditions that can occur in large number in normal operation. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: proper prototypesAdrian Bunk
This patch adds a proper prototype for some functions in fs/dlm/dlm_internal.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-29dlm: bind connections from known local address when using TCPLon Hohberger
A common problem occurs when multiple IP addresses within the same subnet are assigned to the same NIC. If we make a connection attempt to another address on the same subnet as one of those addresses, the connection attempt will not necessarily be routed from the address we want. In the case of the DLM, the other nodes will quickly drop the connection attempt, causing problems. This patch makes the DLM bind to the local address it acquired from the cluster manager when using TCP prior to making a connection, obviating the need for administrators to "fix" their systems or use clever routing tricks. Signed-off-by: Lon Hohberger <lhh@redhat.com> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-25Kobject: convert fs/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25Kobject: change GFS2 to use kobject_init_and_addGreg Kroah-Hartman
Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25kobject: convert kernel_kset to be a kobjectGreg Kroah-Hartman
kernel_kset does not need to be a kset, but a much simpler kobject now that we have kobj_attributes. We also rename kernel_kset to kernel_kobj to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25kset: convert kernel_subsys to use kset_createGreg Kroah-Hartman
Dynamically create the kset instead of declaring it statically. We also rename kernel_subsys to kernel_kset to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>