| Age | Commit message (Collapse) | Author |
|---|
|
If f2fs was corrupted with missing dot dentries, it needs to recover them after
fsck.f2fs detection.
The underlying precedure is:
1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects
missing dot dentries.
2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with
proper inode numbers and their dot and dotdot names.
3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS
finally.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Split __set_data_blkaddr from f2fs_update_extent_cache for readability.
Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fast symlink can utilize inline data flow to avoid using any
i_addr region, since we need to handle many cases such as
truncation, roll-forward recovery, and fsck/dump tools.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch removes wrong f2fs_bug_on in truncate_inline_inode.
When there is no space, it can happen a corner case where i_isze is over
MAX_INLINE_SIZE while its inode is still inline_data.
The scenario is
1. write small data into file #A.
2. fill the whole partition to 100%.
3. truncate 4096 on file #A.
4. write data at 8192 offset.
--> f2fs_write_begin
-> -ENOSPC = f2fs_convert_inline_page
-> f2fs_write_failed
-> truncate_blocks
-> truncate_inline_inode
BUG_ON, since i_size is 4096.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().
But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.
So with following operations, we will meet recent data which should be
truncated.
1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.
This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.
v2:
o truncate partially #0 page in truncate_partial_data_page to avoid keeping
old data in #0 page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In this patch, we do these jobs:
1. rename {check,update}_extent_cache to {lookup,update}_extent_info;
2. introduce universal lookup/update interface of extent cache:
f2fs_{lookup,update}_extent_cache including above two real functions, then
export them to function callers.
So after above cleanup, we can add new rb-tree based extent cache into exported
interfaces.
v2:
o remove "f2fs_" for inner function {lookup,update}_extent_info suggested by
Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces f2fs_update_dentry to remove redundant code in
f2fs_add_inline_entry and __f2fs_add_link.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
1. make truncate_inline_date static;
2. remove parameter @from of truncate_inline_date as callers only pass zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch uses dn->data_blkaddr as a parameter for the destination block
address.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If a page is set to be written to the disk, we can make clean the page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Whenever f2fs updates mapped pages, it needs to call flush_dcache_page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The locked page should be released before returning the function.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The # of inline_data inode is decreased only when it has inline_data.
After clearing the flag, we can't decreased the number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When reading inline data, we should call flush_dcache_page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch declares f2fs_convert_inline_dir as a static function, which was
reported by kbuild test robot.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
For better performance, we need to use kmap_atomic instead of kmap.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces do_make_empty_dir to mitigate code redundancy
for inline_dentry.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds status information for inline_dentry inodes.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.
INFO: task mknod:11006 blocked for more than 120 seconds.
Tainted: G OE 3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod D ffff88003fc94580 0 11006 11004 0x00000000
ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
[<ffffffff8173dc40>] ? bit_wait+0x50/0x50
[<ffffffff8173d4cd>] io_schedule+0x9d/0x130
[<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
[<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
[<ffffffff811640a7>] __lock_page+0x67/0x70
[<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
[<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
[<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
[<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
[<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
[<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
[<ffffffff8122d847>] get_acl+0x47/0x70
[<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
[<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
[<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
[<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
[<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
[<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
[<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
[<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
[<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
[<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The inode page needs to wait NODE block io.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch removes redundant copied code in find_in_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces to reuse the existing room_for_filename for inline dentry
operation.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add inline dir functions into normal dir ops' function to handle inline ops.
Besides, we enable inline dir mode when a new dir inode is created if
inline_data option is on.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When trying to write inline_data, we should truncate any data block allocated
and pointed by the inode block.
We should consider the data index is not 0.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
o F2FS_IOC_START_ATOMIC_WRITE
o F2FS_IOC_COMMIT_ATOMIC_WRITE
The database engine should be aware of the following sequence.
1. open
-> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
: all the written data will be treated as atomic pages.
3. commit
-> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
: this flushes all the data blocks to the disk, which will be shown all or
nothing by f2fs recovery procedure.
4. repeat to #2.
The IO pattens should be:
,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE
CP | D D D D D D | FSYNC | D D D D | FSYNC ...
`- COMMIT_ATOMIC_WRITE
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If any f2fs_bug_on is triggered, fsck.f2fs is needed.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds three inline functions to clean up dirty casting codes.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch checks inline_data one more time under the inode page lock whether
its inline_data is converted or not.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The init_inode_metadata calls truncate_blocks when error is occurred.
The callers holds f2fs_lock_op, so we should not call it again in
truncate_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds a parentheses to make clear for condition check.
And also it changes the return type for better meanings.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If mkwrite is called to an inode having inline_data, it can overwrite the data
index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces a inode number list in which represents inodes having
appended data writes or updated data writes after last checkpoint.
This will be used at fsync to determine whether the recovery information
should be written or not.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We don't need to wait on page writeback for these cases.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.
This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Previous we do not truncate inline data in inode page when setattr, so following
case could still read the inline data which has already truncated:
1.write inline data
2.ftruncate size to 0
3.ftruncate size to max inline data size
4.read from offset 0
This patch introduces truncate_inline_data() to fix this problem.
change log from v1:
o fix a bug and do not truncate first page data after truncate inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
If it occurs an error, we should call f2fs_unlock_op.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
We should unlock page in ->readpage() path and also should unlock & release page
in error path of ->write_begin() to avoid deadlock or memory leak.
So let's add release code to fix the problem when we fail to read inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback.
We should remove this parameter.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Here is a case which could read inline page data not from first page.
1. write inline data
2. lseek to offset 4096
3. read 4096 bytes from offset 4096
(read_inline_data read inline data page to non-first page,
And previously VFS has add this page to page cache)
4. ftruncate offset 8192
5. read 4096 bytes from offset 4096
(we meet this updated page with inline data in cache)
So we should leave this page with inited data and uptodate flag
for this case.
Change log from v1:
o fix a deadlock bug
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
Change log from v1:
o reduce unneeded memset in __f2fs_convert_inline_data
>From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001
From: Chao Yu <chao2.yu@samsung.com>
Date: Mon, 30 Dec 2013 09:21:33 +0800
Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read
inline data
We left uninitialized data in the tail of page when we read an inline data
page. So let's initialize left part of the page excluding inline data region.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
The get_dnode_of_data nullifies inode and node page when error is occurred.
There are two cases that passes inode page into get_dnode_of_data().
1. make_empty_dir()
-> get_new_data_page()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
2. f2fs_convert_inline_data()
-> __f2fs_convert_inline_data()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
This patch adds correct error handling codes when get_dnode_of_data() returns
an error.
At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block
returns an error.
So, the rule of f2fs_reserve_block() is to nullify inode page when there is any
error internally.
Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode()
appropriately if they got an error since successful f2fs_reserve_block().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
|
This patch adds the number of inline_data files into the status information.
Note that the number is reset whenever the filesystem is newly mounted.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
|
