summaryrefslogtreecommitdiff
path: root/fs/fuse/file.c
AgeCommit message (Collapse)Author
2011-02-25fuse: fix hang of single threaded fuseblk filesystemMiklos Szeredi
Single threaded NTFS-3G could get stuck if a delayed RELEASE reply triggered a DESTROY request via path_put(). Fix this by a) making RELEASE requests synchronous, whenever possible, on fuseblk filesystems b) if not possible (triggered by an asynchronous read/write) then do the path_put() in a separate thread with schedule_work(). Reported-by: Oliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-12-07fuse: fix ioctl ABIMiklos Szeredi
In kernel ABI version 7.16 and later FUSE_IOCTL_RETRY reply from a unrestricted IOCTL request shall return with an array of 'struct fuse_ioctl_iovec' instead of 'struct iovec'. This fixes the ABI ambiguity of 32bit vs. 64bit. Reported-by: "ccmail111" <ccmail111@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org>
2010-12-07fuse: ioctl cleanupMiklos Szeredi
Get rid of unnecessary page_address()-es. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org>
2010-11-30fuse: verify ioctl retriesMiklos Szeredi
Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY doesn't overflow iov_length(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org> CC: <stable@kernel.org> [2.6.31+]
2010-11-30fuse: fix ioctl when server is 32bitMiklos Szeredi
If a 32bit CUSE server is run on 64bit this results in EIO being returned to the caller. The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct iovec', which is different on 32bit and 64bit archs. Work around this by looking at the size of the reply to determine which struct was used. This is only needed if CONFIG_COMPAT is defined. A more permanent fix for the interface will be to use the same struct on both 32bit and 64bit. Reported-by: "ccmail111" <ccmail111@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Tejun Heo <tj@kernel.org> CC: <stable@kernel.org> [2.6.31+]
2010-11-24fuse: fix attributes after open(O_TRUNC)Ken Sumrall
The attribute cache for a file was not being cleared when a file is opened with O_TRUNC. If the filesystem's open operation truncates the file ("atomic_o_trunc" feature flag is set) then the kernel should invalidate the cached st_mtime and st_ctime attributes. Also i_size should be explicitly be set to zero as it is used sometimes without refreshing the cache. Signed-off-by: Ken Sumrall <ksumrall@android.com> Cc: Anfei <anfei.zhou@gmail.com> Cc: "Anand V. Avati" <avati@gluster.com> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-07fuse: fix lock annotationsMiklos Szeredi
Sparse doesn't understand lock annotations of the form __releases(&foo->lock). Change them to __releases(foo->lock). Same for __acquires(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12fuse: add store requestMiklos Szeredi
Userspace filesystem can request data to be stored in the inode's mapping. This request is synchronous and has no reply. If the write to the fuse device returns an error then the store request was not fully completed (but may have updated some pages). If the stored data overflows the current file size, then the size is extended, similarly to a write(2) on the filesystem. Pages which have been completely stored are marked uptodate. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: mm: export generic_pipe_buf_*() to modules fuse: support splice() reading from fuse device fuse: allow splice to move pages mm: export remove_from_page_cache() to modules mm: export lru_cache_add_*() to modules fuse: support splice() writing to fuse device fuse: get page reference for readpages fuse: use get_user_pages_fast() fuse: remove unneeded variable
2010-05-28drop unused dentry argument to ->fsyncChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-25fuse: allow splice to move pagesMiklos Szeredi
When splicing buffers to the fuse device with SPLICE_F_MOVE, try to move pages from the pipe buffer into the page cache. This allows populating the fuse filesystem's cache without ever touching the page contents, i.e. zero copy read capability. The following steps are performed when trying to move a page into the page cache: - buf->ops->confirm() to make sure the new page is uptodate - buf->ops->steal() to try to remove the new page from it's previous place - remove_from_page_cache() on the old page - add_to_page_cache_locked() on the new page If any of the above steps fail (non fatally) then the code falls back to copying the page. In particular ->steal() will fail if there are external references (other than the page cache and the pipe buffer) to the page. Also since the remove_from_page_cache() + add_to_page_cache_locked() are non-atomic it is possible that the page cache is repopulated in between the two and add_to_page_cache_locked() will fail. This could be fixed by creating a new atomic replace_page_cache_page() function. fuse_readpages_end() needed to be reworked so it works even if page->mapping is NULL for some or all pages which can happen if the add_to_page_cache_locked() failed. A number of sanity checks were added to make sure the stolen pages don't have weird flags set, etc... These could be moved into generic splice/steal code. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25fuse: get page reference for readpagesMiklos Szeredi
Acquire a page ref on pages in ->readpages() and release them when the read has finished. Not acquiring a reference didn't seem to cause any trouble since the page is locked and will not be kicked out of the page cache during the read. However the following patches will want to remove the page from the cache so a separate ref is needed. Making the reference in req->pages explicit also makes the code easier to understand. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25fuse: use get_user_pages_fast()Miklos Szeredi
Replace uses of get_user_pages() with get_user_pages_fast(). It looks nicer and should be faster in most cases. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25fuse: remove unneeded variableDan Carpenter
"map" isn't needed any more after: 0bd87182d3ab18 "fuse: fix kunmap in fuse_ioctl_copy_user" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-02-03mm: flush dcache before writing into page to avoid aliasanfei zhou
The cache alias problem will happen if the changes of user shared mapping is not flushed before copying, then user and kernel mapping may be mapped into two different cache line, it is impossible to guarantee the coherence after iov_iter_copy_from_user_atomic. So the right steps should be: flush_dcache_page(page); kmap_atomic(page); write to page; kunmap_atomic(page); flush_dcache_page(page); More precisely, we might create two new APIs flush_dcache_user_page and flush_dcache_kern_page to replace the two flush_dcache_page accordingly. Here is a snippet tested on omap2430 with VIPT cache, and I think it is not ARM-specific: int val = 0x11111111; fd = open("abc", O_RDWR); addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *(addr+0) = 0x44444444; tmp = *(addr+0); *(addr+1) = 0x77777777; write(fd, &val, sizeof(int)); close(fd); The results are not always 0x11111111 0x77777777 at the beginning as expected. Sometimes we see 0x44444444 0x77777777. Signed-off-by: Anfei <anfei.zhou@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: <linux-arch@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-04fuse: fix kunmap in fuse_ioctl_copy_userJens Axboe
Looks like another victim of the confusing kmap() vs kmap_atomic() API differences. Reported-by: Todor Gyumyushev <yodor1@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org
2009-11-04fuse: prevent fuse_put_request on invalid pointerAnand V. Avati
fuse_direct_io() has a loop where requests are allocated in each iteration. if allocation fails, the loop is broken out and follows into an unconditional fuse_put_request() on that invalid pointer. Signed-off-by: Anand V. Avati <avati@gluster.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@kernel.org
2009-09-27const: mark struct vm_struct_operationsAlexey Dobriyan
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30fuse: fix bad return value in fuse_file_poll()Miklos Szeredi
Fix fuse_file_poll() which returned a -errno value instead of a poll mask. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org
2009-04-28fuse: export symbols to be used by CUSETejun Heo
Export the following symbols for CUSE. fuse_conn_put() fuse_conn_get() fuse_conn_kill() fuse_send_init() fuse_do_open() fuse_sync_release() fuse_direct_io() fuse_do_ioctl() fuse_file_poll() fuse_request_alloc() fuse_get_req() fuse_put_request() fuse_request_send() fuse_abort_conn() fuse_dev_release() fuse_dev_operations Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in fuse_file_pollMiklos Szeredi
Use ff->fc and ff->nodeid instead of file->f_dentry->d_inode in the fuse_file_poll() implementation. This prepares this function for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in fuse_do_ioctl() helperMiklos Szeredi
Create a helper for sending an IOCTL request that doesn't use a struct inode. This prepares this function for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in fuse_sync_release()Miklos Szeredi
Make fuse_sync_release() a generic helper function that doesn't need a struct inode pointer. This makes it suitable for use by CUSE. Change return value of fuse_release_common() from int to void. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: create fuse_do_open() helper for CUSEMiklos Szeredi
Create a helper for sending an OPEN request that doesn't need a struct inode pointer. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: clean up args in fuse_finish_open() and fuse_release_fill()Miklos Szeredi
Move setting ff->fh, ff->nodeid and file->private_data outside fuse_finish_open(). Add ->open_flags member to struct fuse_file. This simplifies the argument passing to fuse_finish_open() and fuse_release_fill(), and paves the way for creating an open helper that doesn't need an inode pointer. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in helpers called by fuse_direct_io()Miklos Szeredi
Use ff->fc and ff->nodeid instead of passing down the inode. This prepares this function for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: add members to struct fuse_fileMiklos Szeredi
Add new members ->fc and ->nodeid to struct fuse_file. This will aid in converting functions for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: prepare fuse_direct_io() for CUSEMiklos Szeredi
Move code operating on the inode out from fuse_direct_io(). This prepares this function for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: clean up fuse_write_fill()Miklos Szeredi
Move out code from fuse_write_fill() which is not common to all callers. Remove two function arguments which become unnecessary. Also remove unnecessary memset(), the request is already initialized to zero. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: use struct path in release structureMiklos Szeredi
Use struct path instead of separate dentry and vfsmount in req->misc.release. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: misc cleanupsTejun Heo
* fuse_file_alloc() was structured in weird way. The success path was split between else block and code following the block. Restructure the code such that it's easier to read and modify. * Unindent success path of fuse_release_common() to ease future changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-09fuse: fix "direct_io" private mmapMiklos Szeredi
MAP_PRIVATE mmap could return stale data from the cache for "direct_io" files. Fix this by flushing the cache on mmap. Found with a slightly modified fsx-linux. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-09fuse: fix argument type in fuse_get_user_pages()Miklos Szeredi
Fix the following warning: fs/fuse/file.c: In function 'fuse_direct_io': fs/fuse/file.c:1002: warning: passing argument 3 of 'fuse_get_user_pages' from incompatible pointer type This was introduced by commit f4975c67 "fuse: allow kernel to access "direct_io" files". Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-02fuse: allow private mappings of "direct_io" filesMiklos Szeredi
Allow MAP_PRIVATE mmaps of "direct_io" files. This is necessary for execute support. MAP_SHARED mappings require some sort of coherency between the underlying file and the mapping. With "direct_io" it is difficult to provide this, so for the moment just disallow shared (read-write and read-only) mappings altogether. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-02fuse: allow kernel to access "direct_io" filesMiklos Szeredi
Allow the kernel read and write on "direct_io" files. This is necessary for nfs export and execute support. The implementation is simple: if an access from the kernel is detected, don't perform get_user_pages(), just use the kernel address provided by the requester to copy from/to the userspace filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-01mm: page_mkwrite change prototype to match faultNick Piggin
Change the page_mkwrite prototype to take a struct vm_fault, and return VM_FAULT_xxx flags. There should be no functional change. This makes it possible to return much more detailed error information to the VM (and also can provide more information eg. virtual_address to the driver, which might be important in some special cases). This is required for a subsequent fix. And will also make it easier to merge page_mkwrite() with fault() in future. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Felix Blyakher <felixb@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30fuse: fix fuse_file_lseek returning with lock heldDan Carpenter
This bug was found with smatch (http://repo.or.cz/w/smatch.git/). If we return directly the inode->i_mutex lock doesn't get released. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org
2009-01-26fuse: fix NULL deref in fuse_file_alloc()Dan Carpenter
ff is set to NULL and then dereferenced on line 65. Compile tested only. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: clean up annotations of fc->lock fuse: fix sparse warning in ioctl fuse: update interface version fuse: add fuse_conn->release() fuse: separate out fuse_conn_init() from new_conn() fuse: add fuse_ prefix to several functions fuse: implement poll support fuse: implement unsolicited notification fuse: add file kernel handle fuse: implement ioctl support fuse: don't let fuse_req->end() put the base reference fuse: move FUSE_MINOR to miscdevice.h fuse: style fixes
2009-01-04fs: symlink write_begin allocation context fixNick Piggin
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-02fuse: clean up annotations of fc->lockHarvey Harrison
Makes the existing annotations match the more common one per line style and adds a few missing annotations. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-12-02fuse: fix sparse warning in ioctlMiklos Szeredi
Fix sparse warning: CHECK fs/fuse/file.c fs/fuse/file.c:1615:17: warning: incorrect type in assignment (different address spaces) fs/fuse/file.c:1615:17: expected void [noderef] <asn:1>*iov_base fs/fuse/file.c:1615:17: got void *<noident> This was introduced by "fuse: implement ioctl support". Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: add fuse_ prefix to several functionsTejun Heo
Add fuse_ prefix to request_send*() and get_root_inode() as some of those functions will be exported for CUSE. With or without CUSE export, having the function names scoped is a good idea for debuggability. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: implement poll supportTejun Heo
Implement poll support. Polled files are indexed using kh in a RB tree rooted at fuse_conn->polled_files. Client should send FUSE_NOTIFY_POLL notification once after processing FUSE_POLL which has FUSE_POLL_SCHEDULE_NOTIFY set. Sending notification unconditionally after the latest poll or everytime file content might have changed is inefficient but won't cause malfunction. fuse_file_poll() can sleep and requires patches from the following thread which allows f_op->poll() to sleep. http://thread.gmane.org/gmane.linux.kernel/726176 Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: add file kernel handleTejun Heo
The file handle, fuse_file->fh, is opaque value supplied by userland FUSE server and uniqueness is not guaranteed. Add file kernel handle, fuse_file->kh, which is allocated by the kernel on file allocation and guaranteed to be unique. This will be used by poll to match notification to the respective file but can be used for other purposes where unique file handle is necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: implement ioctl supportTejun Heo
Generic ioctl support is tricky to implement because only the ioctl implementation itself knows which memory regions need to be read and/or written. To support this, fuse client can request retry of ioctl specifying memory regions to read and write. Deep copying (nested pointers) can be implemented by retrying multiple times resolving one depth of dereference at a time. For security and cleanliness considerations, ioctl implementation has restricted mode where the kernel determines data transfer directions and sizes using the _IOC_*() macros on the ioctl command. In this mode, retry is not allowed. For all FUSE servers, restricted mode is enforced. Unrestricted ioctl will be used by CUSE. Plese read the comment on top of fs/fuse/file.c::fuse_file_do_ioctl() for more information. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: don't let fuse_req->end() put the base referenceTejun Heo
fuse_req->end() was supposed to be put the base reference but there's no reason why it should. It only makes things more complex. Move it out of ->end() and make it the responsibility of request_end(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: style fixesMiklos Szeredi
Fix coding style errors reported by checkpatch and others. Uptdate copyright date to 2008. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-10-16fuse: implement nonseekable openTejun Heo
Let the client request nonseekable open using FOPEN_NONSEEKABLE and call nonseekable_open() on the file if requested. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-10-16fuse: fix SEEK_END incorrectnessMiklos Szeredi
Update file size before using it in lseek(..., SEEK_END). Reported-by: Amnon Shiloh <u3557@miso.sublimeip.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>