summaryrefslogtreecommitdiff
path: root/fs/fuse
AgeCommit message (Collapse)Author
2008-06-18fuse: fix thinko in max I/O size calucationMiklos Szeredi
Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df07484d6d191756878c974e4307fb24ce). Thanks to Brian Wang for noticing. Reported-by: Brian Wang <ywang221@hotmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Szabolcs Szakacsits <szaka@ntfs-3g.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24fuse: fix bdi naming conflictMiklos Szeredi
Fuse allocates a separate bdi for each filesystem, and registers them in sysfs with "MAJOR:MINOR" of sb->s_dev (st_dev). This works fine for anon devices normally used by fuse, but can conflict with an already registered BDI for "fuseblk" filesystems, where sb->s_dev represents a real block device. In particularl this happens if a non-partitioned device is being mounted. Fix by registering with a different name for "fuseblk" filesystems. Thanks to Ioan Ionita for the bug report. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Ioan Ionita <opslynx@gmail.com> Tested-by: Ioan Ionita <opslynx@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13fuse: add flag to turn on big writesMiklos Szeredi
Prior to 2.6.26 fuse only supported single page write requests. In theory all fuse filesystem should be able support bigger than 4k writes, as there's nothing in the API to prevent it. Unfortunately there's a known case in NTFS-3G where big writes cause filesystem corruption. There could also be other filesystems, where the lack of testing with big write requests would result in bugs. To prevent such problems on a kernel upgrade, disable big writes by default, but let filesystems set a flag to turn it on. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Szabolcs Szakacsits <szaka@ntfs-3g.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01fuse: use clamp() rather than nested min/maxHarvey Harrison
clamp() exists for this use. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: fix sparse warningsMiklos Szeredi
fs/fuse/dev.c:306:2: warning: context imbalance in 'wait_answer_interruptible' - unexpected unlock fs/fuse/dev.c:361:2: warning: context imbalance in 'request_wait_answer' - unexpected unlock fs/fuse/dev.c:1002:4: warning: context imbalance in 'end_io_requests' - unexpected unlock Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: fix race in llseekMiklos Szeredi
Fuse doesn't use i_mutex to protect setting i_size, and so generic_file_llseek() can be racy: it doesn't use i_size_read(). So do a fuse specific llseek method, which does use i_size_read(). [akpm@linux-foundation.org: make `retval' loff_t] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: fix node ID typeMiklos Szeredi
Node ID is 64bit but it is passed as unsigned long to some functions. This breakage wasn't noticed, because libfuse uses unsigned long too. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: fix max i/o size calculationMiklos Szeredi
Fix a bug that Werner Baumann reported: fuse can send a bigger write request than the maximum specified. This only affected direct_io operation. In addition set a sane minimum for the max_read and max_write tunables, so I/O always makes some progress. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: update file size on short readMiklos Szeredi
If the READ request returned a short count, then either - cached size is incorrect - filesystem is buggy, as short reads are only allowed on EOF So assume that the size is wrong and refresh it, so that cached read() doesn't zero fill the missing chunk. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: implement perform_writeNick Piggin
Introduce fuse_perform_write. With fusexmp (a passthrough filesystem), large (1MB) writes into a backing tmpfs filesystem are sped up by almost 4 times (256MB/s vs 71MB/s). [mszeredi@suse.cz]: - split into smaller functions - testing - duplicate generic_file_aio_write(), so that there's no need to add a new ->perform_write() a_op. Comment from hch. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: clean up setting i_size in writeMiklos Szeredi
Extract common code for setting i_size in write functions into a common helper. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: support writable mmapMiklos Szeredi
Quoting Linus (3 years ago, FUSE inclusion discussions): "User-space filesystems are hard to get right. I'd claim that they are almost impossible, unless you limit them somehow (shared writable mappings are the nastiest part - if you don't have those, you can reasonably limit your problems by limiting the number of dirty pages you accept through normal "write()" calls)." Instead of attempting the impossible, I've just waited for the dirty page accounting infrastructure to materialize (thanks to Peter Zijlstra and others). This nicely solved the biggest problem: limiting the number of pages used for write caching. Some small details remained, however, which this largish patch attempts to address. It provides a page writeback implementation for fuse, which is completely safe against VM related deadlocks. Performance may not be very good for certain usage patterns, but generally it should be acceptable. It has been tested extensively with fsx-linux and bash-shared-mapping. Fuse page writeback design -------------------------- fuse_writepage() allocates a new temporary page with GFP_NOFS|__GFP_HIGHMEM. It copies the contents of the original page, and queues a WRITE request to the userspace filesystem using this temp page. The writeback is finished instantly from the MM's point of view: the page is removed from the radix trees, and the PageDirty and PageWriteback flags are cleared. For the duration of the actual write, the NR_WRITEBACK_TEMP counter is incremented. The per-bdi writeback count is not decremented until the actual write completes. On dirtying the page, fuse waits for a previous write to finish before proceeding. This makes sure, there can only be one temporary page used at a time for one cached page. This approach is wasteful in both memory and CPU bandwidth, so why is this complication needed? The basic problem is that there can be no guarantee about the time in which the userspace filesystem will complete a write. It may be buggy or even malicious, and fail to complete WRITE requests. We don't want unrelated parts of the system to grind to a halt in such cases. Also a filesystem may need additional resources (particularly memory) to complete a WRITE request. There's a great danger of a deadlock if that allocation may wait for the writepage to finish. Currently there are several cases where the kernel can block on page writeback: - allocation order is larger than PAGE_ALLOC_COSTLY_ORDER - page migration - throttle_vm_writeout (through NR_WRITEBACK) - sync(2) Of course in some cases (fsync, msync) we explicitly want to allow blocking. So for these cases new code has to be added to fuse, since the VM is not tracking writeback pages for us any more. As an extra safetly measure, the maximum dirty ratio allocated to a single fuse filesystem is set to 1% by default. This way one (or several) buggy or malicious fuse filesystems cannot slow down the rest of the system by hogging dirty memory. With appropriate privileges, this limit can be raised through '/sys/class/bdi/<bdi>/max_ratio'. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30mm: bdi: expose the BDI object in sysfs for FUSEMiklos Szeredi
Register FUSE's backing_dev_info under sysfs with the name "fuse-MAJOR:MINOR" Make the fuse control filesystem use s_dev instead of a fuse specific ID. This makes it easier to match directories under /sys/fs/fuse/connections/ with directories under /sys/class/bdi, and with actual mounts. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25[PATCH] restore sane ->umount_begin() APIAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-24fuse: fix permission checkingMiklos Szeredi
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the result, that the 'default_permissions' mount option is basically ignored. How did this happen? - old err declaration in inner scope - new err getting declared in outer scope - 'return err' from inner scope getting removed - old declaration not being noticed -Wshadow would have saved us, but it doesn't seem practical for the kernel :( More testing would have also saved us :(( Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08mount options: fix fuseMiklos Szeredi
Add blksize= option to /proc/mounts for fuseblk filesystems. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07iget: stop FUSE from using iget() and read_inode()David Howells
Stop the FUSE filesystem from using read_inode(), which it doesn't use anyway. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)David Howells
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using: perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security` Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: limit queued background requestsMiklos Szeredi
Libfuse basically creates a new thread for each new request. This is fine for synchronous requests, which are naturally limited. However background requests (especially writepage) can cause a thread creation storm. To avoid this, limit the number of background requests available to userspace. This is done by introducing another queue for background requests, and a counter for the number of "active" requests, which are currently available for userspace. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: save space in struct fuse_reqMiklos Szeredi
Move the fields 'dentry' and 'vfsmount' into the request specific union, since these are only used for the RELEASE request. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: fix attribute caching after createMiklos Szeredi
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-25Kobject: convert fs/* from kobject_unregister() to kobject_put()Greg Kroah-Hartman
There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25kobject: convert main fs kobject to use kobject_createGreg Kroah-Hartman
This also renames fs_subsys to fs_kobj to catch all current users with a build error instead of a build warning which can easily be missed. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25kobject: convert fuse to use kobject_createGreg Kroah-Hartman
We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25kobject: remove struct kobj_type from struct ksetGreg Kroah-Hartman
We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young <hidave.darkstar@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-29fuse: fix attribute caching after renameMiklos Szeredi
Invalidate attributes on rename, since some filesystems may update st_ctime. Reported by Szabolcs Szakacsits Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix uninitialized field in fuse_inodeJohn Muir
I found problems accessing (executing) previously existing files, until I did chmod on them (or setattr). If the fi->attr_version is not initialized, then it could be larger than fc->attr_version until a setattr is executed, and as a result the inode attributes would never be set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix FUSE_FILE_OPS sendingMiklos Szeredi
FUSE_FILE_OPS is meant to signal that the kernel will send the open file to to the userspace filesystem for operations on open files, so that sillyrenaming unlinked files becomes unnecessary. However this needs VFS changes, which won't make it into 2.6.24. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: pass open flags to read and writeMiklos Szeredi
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...) after open, but fuse currently only sends the flags to userspace in open. To make it possible to correcly handle changing flags, send the current value to userspace in each read and write. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: cleanup: add fuse_get_attr_version()Miklos Szeredi
Extract repeated code into helper function, as suggested by Akpm. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix reading past EOFMiklos Szeredi
Currently reading a fuse file will stop at cached i_size and return EOF, even though the file might have grown since the attributes were last updated. So detect if trying to read past EOF, and refresh the attributes before continuing with the read. Thanks to mpb for the report. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-15fuse_file_alloc(): fix NULL dereferencesAdrian Bunk
Fix obvious NULL dereferences spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add blksize field to fuse_attrMiklos Szeredi
There are cases when the filesystem will be passed the buffer from a single read or write call, namely: 1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go through the page cache, but go directly to the userspace fs 2) currently buffered writes are done with single page requests, but if Nick's ->perform_write() patch goes it, it will be possible to do larger write requests. But only if the original write() was also bigger than a page. In these cases the filesystem might want to give a hint to the app about the optimal I/O size. Allow the userspace filesystem to supply a blksize value to be returned by stat() and friends. If the field is zero, it defaults to the old PAGE_CACHE_SIZE value. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add support for mandatory lockingMiklos Szeredi
For mandatory locking the userspace filesystem needs to know the lock ownership for read, write and truncate operations. This patch adds the necessary fields to the protocol. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add helper for asynchronous writesMiklos Szeredi
This patch adds a new helper function fuse_write_fill() which makes it possible to send WRITE requests asynchronously. A new flag for WRITE requests is also added which indicates that this a write from the page cache, and not a "normal" file write. This patch is in preparation for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add list of writable files to fuse_inodeMiklos Szeredi
Each WRITE request must carry a valid file descriptor. When a page is written back from a memory mapping, the file through which the page was dirtied is not available, so a new mechananism is needed to find a suitable file in ->writepage(s). A list of fuse_files is added to fuse_inode. The file is removed from the list in fuse_release(). This patch is in preparation for writable mmap support. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: support BSD locking semanticsMiklos Szeredi
It is trivial to add support for flock(2) semantics to the existing protocol, by setting the lock owner field to the file pointer, and passing a new FUSE_LK_FLOCK flag with the locking request. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add atomic open+truncate supportMiklos Szeredi
This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single request, instead of separate truncate and open requests. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: improve utimes supportMiklos Szeredi
Add two new flags for setattr: FATTR_ATIME_NOW and FATTR_MTIME_NOW. These mean, that atime or mtime should be changed to the current time. Also it is now possible to update atime or mtime individually, not just together. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: clean up open file passing in setattrMiklos Szeredi
Clean up supplying open file to the setattr operation. In addition to being a cleanup it prepares for the changes in the way the open file is passed to the setattr method. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add file handle to getattr operationMiklos Szeredi
Add necessary protocol changes for supplying a file handle with the getattr operation. Step the API version to 7.9. This patch doesn't actually supply the file handle, because that needs some kind of VFS support, which we haven't yet been able to agree upon. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix race between getattr and writeMiklos Szeredi
Getattr and lookup operations can be running in parallel to attribute changing operations, such as write and setattr. This means, that if for example getattr was slower than a write, the cached size attribute could be set to a stale value. To prevent this race, introduce a per-filesystem attribute version counter. This counter is incremented whenever cached attributes are modified, and the incremented value stored in the inode. Before storing new attributes in the cache, getattr and lookup check, using the version number, whether the attributes have been modified during the request's lifetime. If so, the returned attributes are not cached, because they might be stale. Thanks to Jakub Bogusz for the bug report and test program. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jakub Bogusz <jakub.bogusz@gemius.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix allowing operationsMiklos Szeredi
The following operation didn't check if sending the request was allowed: setattr listxattr statfs Some other operations don't explicitly do the check, but VFS calls ->permission() which checks this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: clean up execute permission checkingMiklos Szeredi
Define a new function fuse_refresh_attributes() that conditionally refreshes the attributes based on the validity timeout. In fuse_permission() only refresh the attributes for checking the execute bits if necessary. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: no ENOENT from fuse device readMiklos Szeredi
Don't return -ENOENT for a read() on the fuse device when the request was aborted. Instead return -ENODEV, meaning the filesystem has been force-umounted or aborted. Previously ENOENT meant that the request was interrupted, but now the 'aborted' flag is not set in case of interrupts. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: no abort on interruptMiklos Szeredi
Don't set 'aborted' flag on a request if it's interrupted. We have to wait for the answer anyway, and this would only a very little time while copying the reply. This means, that write() on the fuse device will not return -ENOENT during normal operation, only if the filesystem is aborted by a forced umount or through the fusectl interface. This could simplify userspace code somewhat when backward compatibility with earlier kernel versions is not required. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: cleanup in releaseMiklos Szeredi
Move dput/mntput pair from request_end() to fuse_release_end(), because there's no other place they are used. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: fix permission checking on sticky directoriesMiklos Szeredi
The VFS checks sticky bits on the parent directory even if the filesystem defines it's own ->permission(). In some situations (sshfs, mountlo, etc) the user does have permission to delete a file even if the attribute based checking would not allow it. So work around this by storing the permission bits separately and returning them in stat(), but cutting the permission bits off from inode->i_mode. This is slightly hackish, but it's probably not worth it to add new infrastructure in VFS and a slight performance penalty for all filesystems, just for the sake of fuse. [Jan Engelhardt] cosmetic fixes Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: refresh stale attributes in fuse_permission()Miklos Szeredi
fuse_permission() didn't refresh inode attributes before using them, even if the validity has already expired. Thanks to Junjiro Okajima for spotting this. Also remove some old code to unconditionally refresh the attributes on the root inode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: set i_nlink to sane value after mountMiklos Szeredi
Aufs seems to depend on a positive i_nlink value. So fill in a dummy but sane value for the root inode at mount time. The inode attributes are refreshed with the correct values at the first opportunity. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-11-07 06:19:02 (GMT)