| Age | Commit message (Collapse) | Author |
|---|
|
The following patch adds a message to indicate when barriers have been
disabled due to a block device which doesn't support them. You could
already tell this via the mount options in /proc/mounts, but all the
other filesystems also log a message at the same time.
Also, the same mechanisms are used to indicate when the lock
demote interface has been used (only ever used for debugging)
which is a request from our support team.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
|
|
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Currenly sync_quota_sb does a lot of sync and truncate action that only
applies to "VFS" style quotas and is actively harmful for the sync
performance in XFS. Move it into vfs_quota_sync and add a wait parameter
to ->quota_sync to tell if we need it or not.
My audit of the GFS2 code says it's also not needed given the way GFS2
implements quotas, but I'd be happy if this can get a detailed review.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
As a consequence of the previous patch, we can now remove the
loop which used to be required due to the circular dependency
between the inodes and glocks. Instead we can just invalidate
the inodes, and then clear up any glocks which are left.
Also we no longer need the rwsem since there is no longer any
danger of the inode invalidation calling back into the glock
code (and from there back into the inode code).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.
The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).
This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.
This results in three major improvements:
1. A saving of approx 25% of memory used in caching inodes
2. A removal of the circular dependency between inodes and glocks
3. No confusion between "normal" and "metadata" inodes in super.c
Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Although all glocks are, by the time of the umount glock wait,
scheduled for demotion, some of them haven't made it far
enough through the process for the original set of waiting
code to wait for them.
This extends the ref count to the whole glock lifetime in order
to ensure that the waiting does catch all glocks. It does make
it a bit more invasive, but it seems the only sensible solution
at the moment.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch adds a wait on umount between the point at which we
dispose of all glocks and the point at which we unmount the
lock protocol. This ensures that we've received all the replies
to our unlock requests before we stop the locking.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
|
|
Since the default is barriers on, this only displays the
nobarrier option when that is active.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Currently gfs2 issues barrier unconditionally. There are various reasons
to disable them, be that just for testing or for stupid devices flushing
large battert backed caches. Add a nobarrier option that matches xfs and
btrfs for this. Also add a symmetric barrier option to turn it back on
at remount time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
It's not necessary to do any 64bit division for the statfs sync code, so
remove it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 now has three new mount options, statfs_quantum, quota_quantum and
statfs_percent. statfs_quantum and quota_quantum simply allow you to
set the tunables of the same name. Setting setting statfs_quantum to 0
will also turn on the statfs_slow tunable. statfs_percent accepts an
integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to
do any early sync when the local number of blocks free changes by at
least statfs_percent from the totoal number of blocks free. Setting
statfs_percent to 0 disables this.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
These two functions are altered so that gfs2_quota_sync may
in future be called directly from the VFS. The GFS2 superblock
changes to a VFS super block and there is an addition of an int
argument which is currently ignored.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We have a long term plan to use the "-o meta" flag to GFS2 mounts to
access the alternate root which is used to store metadata for a GFS2
filesystem. This will allow us to eventually remove support for the
gfs2meta filesystem type (which is in any case just a "front end" to
the gfs2 filesystem type with the meta/master root).
Currently the "-o meta" option is only taken into account on the
initial mount of the filesystem. Subsequent mounts of the same
filesystem (i.e. on the same device) result in basically the same
as bind mounting the root of the original mount.
This patch changes that by using what is more or less a copy
of get_sb_bdev() and extending it so that it will take into
account the alternate root in all cases. The main difference
is that we have to parse the mount options a bit earlier. We can
then use them to select the appropriate root towards the end of
the function.
In addition this also fixes a bug where it was possible (but certainly
not desirable) to set different ro/rw options for the meta root
when mounted via the gfs2meta fs compared with the original mount.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
|
|
There is a potential race in the inode deallocation code if two
nodes try to deallocate the same inode at the same time. Most of
the issue is solved by the iopen locking. There is still a small
window which is not covered by the iopen lock. This patches fixes
that and also makes the deallocation code more robust in the face of
any errors in the rgrp bitmaps, or erroneous iopen callbacks from
other nodes.
This does introduce one extra disk read, but that is generally not
an issue since its the same block that must be written to later
in the deallocation process. The total disk accesses therefore stay
the same,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The inum structure used throughout GFS2 has two fields. One
no_addr is the disk block number of the inode in question and
is used everywhere as the inode number. The other, no_formal_ino,
is used only as the generation number for NFS.
Historically the no_formal_ino field was set using a complicated
system of one global and one per-node file containing inode numbers
in order to ensure that each no_formal_ino was unique. Also this
code made no provision for what would happen when eventually the
(64 bit) numbers ran out. Now I know that is pretty unlikely to
happen given the large space of numbers, but it is possible
nevertheless.
The only guarantee required for no_formal_ino is that, for any
single inode, the same number doesn't get reused too quickly.
We already have a generation number which is kept in the inode
and initialised from a counter in the resource group (almost
no overhead, since we have to touch the resource group anyway
in order to allocate an inode in the first place). Aside from
ensuring that we never use the value 0 in the no_formal_ino
field, we can use that counter directly.
As a result of that change, we lose about 200 lines of code and
also gain about 10 creates/sec on the postmark benchmark (on
my test machine).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Use the more conventional name for the extended attribute
support code. Update all the places which care.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch adds "-o errors=panic" and "-o errors=withdraw" to the
gfs2 mount options. The "errors=withdraw" option is today's
current behaviour, meaning to withdraw from the file system if a
non-serious gfs2 error occurs. The new "errors=panic" option
tells gfs2 to force a kernel panic if a non-serious gfs2 file
system error occurs. This may be useful, for example, where
fabric-level fencing is used that has no way to reboot (such as
fence_scsi).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We already have an offline uevent (used when a withdraw occurs)
but no online uevent. This adds an online uevent so that userspace
will be able to detect a successful mount by means other than
not receiving a remove event after the add & recovery (change)
uevents.
It has also been added to the remount path as well - we can't use
a change uevent there as older GFS2 userspace acts on change uevents
according to the state that it thinks the fs is in, so we can't
easily add any new ones.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
When a file is deleted from a gfs2 filesystem on one node, a dcache
entry for it may still exist on other nodes in the cluster. If this
happens, gfs2 will be unable to free this file on disk. Because of this,
it's possible to have a gfs2 filesystem with no files on it and no free
space. With this patch, when a node receives a callback notifying it
that the file is being deleted on another node, it schedules a new
workqueue thread to remove the file's dcache entry.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 wasn't syncing its statfs info on grows. This causes a problem
when you grow the filesystem on multiple nodes. GFS2 would calculate
the new space based on the resource groups (which are always current),
and then assume that the filesystem had grown the from the existing
statfs size. If you grew the filesystem on two different nodes in a
short time, the second node wouldn't see the statfs size change from the
first node, and would assume that it was grown by a larger amount than
it was. When all these changes were synced out, the total fileystem
size would be incorrect (the first grow would be counted twice).
This patch syncs makes GFS2 read in the statfs changes from disk before
a grow, and write them out after the grow, while the master statfs inode
is locked.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
It is not required here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat,com>
Cc: Christoph Hellwig <hch@infradead.org>
|
|
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
mount.c only contained a single function, so is not really
worth retaining on its own. All of the super related code
is now either in super.c or ops_fstype.c
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This removes some old code that was causing issues during
filesystem freeze.
Reported-by: Andrew Price <andy@andrewprice.me.uk>
Tested-by: Andrew Price <andy@andrewprice.me.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
o Reducing overhead by eliminating duplicated fields between structures
o Simplifcation of the code (reduces the code size by a fair bit)
o The locking interface is now the DLM interface itself as proposed
some time ago.
o Fewer lookups of glocks when processing replies from the DLM
o Fewer memory allocations/deallocations for each glock
o Scope to do further optimisations in the future (but this patch is
more than big enough for now!)
Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.
This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This reverts commit 78802499912f1ba31ce83a94c55b5a980f250a43.
The original patch is causing problems in relation to order of
operations at umount in relation to jdata files. I need to fix
this a different way.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There was a use-after-free with the GFS2 super block during
umount. This patch moves almost all of the umount code from
->put_super into ->kill_sb, the only bit that cannot be moved
being the glock hash clearing which has to remain as ->put_super
due to umount ordering requirements. As a result its now obvious
that the kfree is the final operation, whereas before it was
hidden in ->put_super.
Also gfs2_jindex_free is then only referenced from a single file
so thats moved and marked static too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The functions which are being moved can all be marked
static in their new locations, since they only have
a single caller each. Their new locations are more
logical than before and some of the functions are
small enough that the compiler might well inline them.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
gfs2_lock_fs_check_clean() should not be calling gfs2_jindex_hold()
since it doesn't work like rindex hold, despite the comment. That
allows gfs2_jindex_hold() to be moved into ops_fstype.c where it
can be made static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch moves the final field so that we can get rid
of struct gfs2_rgrpd_host, as promised some time ago. Also
by rearranging the fields slightly, we are able to reduce
the size of the gfs2_rgrpd structure at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The second of three fields which need to move, in order
to remove the struct gfs2_rgrpd_host.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch is intended to fix the issues reported in bz #457798. Instead
of having the metafs as a separate filesystem, it becomes a second root
of gfs2. As a result it will appear as type gfs2 in /proc/mounts, but it
is still possible (for backwards compatibility purposes) to mount it as
type gfs2meta. A new mount flag "meta" is introduced so that its possible
to tell the two cases apart in /proc/mounts.
As a result it becomes possible to mount type gfs2 with -o meta and
get the same result as mounting type gfs2meta. So it is possible to
mount just the metafs on its own. Currently if you do this, its then
impossible to mount the "normal" root of the gfs2 filesystem without
first unmounting the metafs root. I'm not sure if thats a feature or
a bug :-)
Either way, this is a great improvement on the previous scheme and I've
verified that it works ok with bind mounts on both the "normal" root
and the metafs root in various combinations.
There were also a bunch of functions in super.c which didn't belong there,
so this moves them into ops_fstype.c where they can be static. Hopefully
the mount/umount sequence is now more obvious as a result.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The ability to mark files for direct i/o access when opened
normally is both unused and pointless, so this patch removes
support for that feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch implements a number of cleanups to the core of the
GFS2 glock code. As a result a lot of code is removed. It looks
like a really big change, but actually a large part of this patch
is either removing or moving existing code.
There are some new bits too though, such as the new run_queue()
function which is considerably streamlined. Highlights of this
patch include:
o Fixes a cluster coherency bug during SH -> EX lock conversions
o Removes the "glmutex" code in favour of a single bit lock
o Removes the ->go_xmote_bh() for inodes since it was duplicating
->go_lock()
o We now only use the ->lm_lock() function for both locks and
unlocks (i.e. unlock is a lock with target mode LM_ST_UNLOCKED)
o The fast path is considerably shortly, giving performance gains
especially with lock_nolock
o The glock_workqueue is now used for all the callbacks from the DLM
which allows us to simplify the lock_dlm module (see following patch)
o The way is now open to make further changes such as eliminating the two
threads (gfs2_glockd and gfs2_scand) in favour of a more efficient
scheme.
This patch has undergone extensive testing with various test suites
so it should be pretty stable by now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
|
|
There are several places where GFP_KERNEL allocations happen under a glock,
which will result in hangs if we're under memory pressure and go to re-enter the
fs in order to flush stuff out. This patch changes the culprits to GFS_NOFS to
keep this problem from happening. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch improves the calculation of the tree height in order to reduce
the number of operations which are carried out on each call to gfs2_block_map.
In the common case, we now make a single comparison, rather than calculating
the required tree height from scratch each time. Also in the case that the
tree does need some extra height, we start from the current height rather from
zero when we work out what the new height ought to be.
In addition the di_height field is moved into the inode proper and reduced
in size to a u8 since the value must be between 0 and GFS2_MAX_META_HEIGHT (10).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Here is a patch for the latest upstream GFS2 code:
The journal extent map needs to be initialized sooner than it
currently is. Otherwise failed mount attempts (e.g. not enough
journals, etc.) may panic trying to access the uninitialized list.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves
the ordering as discussed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch saves a little time when gfs2 writes to the journals by
keeping a mapping between logical and physical blocks on disk.
That's better than constantly looking up indirect pointers in
buffers, when the journals are several levels of indirection
(which they typically are).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We only care about the content of the jindex in two cases,
one is when we mount the fs and the other is when we need
to recover another journal. In both cases we have to update
the jindex anyway, so there is no point in updating it
periodically between times, so this removes it to simplify
gfs2_logd.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This call to reclaim glocks is not needed, and in particular we don't want it
in the fast path for locking glocks. The limit was entirely arbitrary anyway
and we can't expect users to adjust things like this, the remaining code will
do the right thing on its own.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
These haven't been used for some time, remove them.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The i_cache was designed to keep references to the indirect blocks
used during block mapping so that they didn't have to be looked
up continually. The idea failed because there are too many places
where the i_cache needs to be freed, and this has in the past been
the cause of many bugs.
In addition there was no performance benefit being gained since the
disk blocks in question were cached anyway. So this patch removes
it in order to simplify the code to prepare for other changes which
would otherwise have had to add further support for this feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (51 commits)
[DLM] block dlm_recv in recovery transition
[DLM] don't overwrite castparam if it's NULL
[GFS2] Get superblock a different way
[GFS2] Don't try to remove buffers that don't exist
[GFS2] Alternate gfs2_iget to avoid looking up inodes being freed
[GFS2] Data corruption fix
[GFS2] Clean up journaled data writing
[GFS2] GFS2: chmod hung - fix race in thread creation
[DLM] Make dlm_sendd cond_resched more
[GFS2] Move inode deletion out of blocking_cb
[GFS2] flocks from same process trip kernel BUG at fs/gfs2/glock.c:1118!
[GFS2] Clean up gfs2_trans_add_revoke()
[GFS2] Use slab operations for all gfs2_bufdata allocations
[GFS2] Replace revoke structure with bufdata structure
[GFS2] Fix ordering of dirty/journal for ordered buffer unstuffing
[GFS2] Clean up ordered write code
[GFS2] Move pin/unpin into lops.c, clean up locking
[GFS2] Don't mark jdata dirty in gfs2_unstuffer_page()
[GFS2] Introduce gfs2_remove_from_ail
[GFS2] Correct lock ordering in unlink
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
