summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2012-04-24GFS2: Instruct DLM to avoid queue convert slowdownBob Peterson
This patch instructs DLM to prevent an "in place" conversion, where the lock just stays on the granted queue, and instead forces the conversion to the back of the convert queue. This is done on upward conversions only. This is useful in cases where, for example, a lock is frequently needed in PR on one node, but another node needs it temporarily in EX to update it. This may happen, for example, when the rindex is being updated by gfs2_grow. The gfs2_grow needs to have the lock in EX, but the other nodes need to re-read it to retrieve the updates. The glock is already granted in PR on the non-growing nodes, so this prevents them from continually re-granting the lock in PR, and forces the EX from gfs2_grow to go through. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds
Pull GFS2 fixes from Steven Whitehouse * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Allow caching of rindex glock GFS2: Make sure rindex is uptodate before starting transactions GFS2: use depends instead of select in kconfig GFS2: put glock reference in error patch of read_rindex_entry
2012-04-10GFS2: Allow caching of rindex glockBob Peterson
This patch allows caching of the rindex glock. We were previously setting the GL_NOCACHE bit when the glock was released. That forced the rindex inode to be invalidated, which caused us to re-read rindex at the next access. However, it caused the glock to be unnecessarily bounced around the cluster. This patch allows the glock to remain cached, but it still causes the rindex to be re-read once it has been written to by gfs2_grow. Ben and I have tested single-node gfs2_grow cases and I've tested clustered gfs2_grow cases on my four-node cluster. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-05GFS2: Make sure rindex is uptodate before starting transactionsBob Peterson
This patch removes the call from gfs2_blk2rgrd to function gfs2_rindex_update and replaces it with individual calls. The former way turned out to be too problematic. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-31get rid of pointless includes of ext2_fs.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-26GFS2: use depends instead of select in kconfigBenjamin Poirier
Avoids having to duplicate the dependencies of what is 'select'ed (and on down...) Those dependencies are currently incomplete, leading to broken builds with GFS2_FS_LOCKING_DLM=y and IP_SCTP=n. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-26GFS2: put glock reference in error patch of read_rindex_entryBob Peterson
This patch fixes the error path of function read_rindex_entry so that it correctly gives up its glock reference in cases where there is a race to re-read the rindex after gfs2_grow. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmwLinus Torvalds
Pull gfs2 changes from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: Change truncate page allocation to be GFP_NOFS GFS2: call gfs2_write_alloc_required for each chunk GFS2: Clean up log flush header writing GFS2: Remove a __GFP_NOFAIL allocation GFS2: Flush pending glock work when evicting an inode GFS2: make sure rgrps are up to date in func gfs2_blk2rgrpd GFS2: Eliminate sd_rindex_mutex GFS2: Unlock rindex mutex on glock error GFS2: Make bd_cmp() static GFS2: Sort the ordered write list GFS2: FITRIM ioctl support GFS2: Move two functions from log.c to lops.c GFS2: glock statistics gathering
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 1 from Al Viro: "This is _not_ all; in particular, Miklos' and Jan's stuff is not there yet." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits) ext4: initialization of ext4_li_mtx needs to be done earlier debugfs-related mode_t whack-a-mole hfsplus: add an ioctl to bless files hfsplus: change finder_info to u32 hfsplus: initialise userflags qnx4: new helper - try_extent() qnx4: get rid of qnx4_bread/qnx4_getblk take removal of PF_FORKNOEXEC to flush_old_exec() trim includes in inode.c um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it um: embed ->stub_pages[] into mmu_context gadgetfs: list_for_each_safe() misuse ocfs2: fix leaks on failure exits in module_init ecryptfs: make register_filesystem() the last potential failure exit ntfs: forgets to unregister sysctls on register_filesystem() failure logfs: missing cleanup on register_filesystem() failure jfs: mising cleanup on register_filesystem() failure make configfs_pin_fs() return root dentry on success configfs: configfs_create_dir() has parent dentry in dentry->d_parent configfs: sanitize configfs_create() ...
2012-03-21switch open-coded instances of d_make_root() to new helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20gfs2: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20GFS2: Change truncate page allocation to be GFP_NOFSBob Peterson
This patch changes the page allocation in gfs2_block_truncate_page and two others to GFP_NOFS to avoid deadlock in low-memory conditions. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09GFS2: call gfs2_write_alloc_required for each chunkBenjamin Marzinski
gfs2_fallocate was calling gfs2_write_alloc_required() once at the start of the function. This caused problems since gfs2_write_alloc_required used a long unsigned int for the len, but gfs2_fallocate could allocate a much larger amount. This patch will move the call into the loop where the chunks are actually allocated and zeroed out. This will keep the allocation size under the limit, and also allow gfs2_fallocate to quickly skip over sections of the file that are already completely allocated. fallcate_chunk was also not correctly setting the file size. It was using the len veriable to find the last block written to, but by the time it was setting the size, the len variable had already been decremented to 0. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-09GFS2: Clean up log flush header writingSteven Whitehouse
We already send both a pre and post flush to the block device when writing a journal header. There is no need to wait for the previous I/O specifically when we do this, unless we've turned "barriers" off. As a side effect, this also cleans up the code path for flushing the journal and makes it more readable. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-08GFS2: Remove a __GFP_NOFAIL allocationSteven Whitehouse
In order to ensure that we've got enough buffer heads for flushing the journal, the orignal code used __GFP_NOFAIL when performing this allocation. Here we dispense with that in favour of using a mempool. This should improve efficiency in low memory conditions since flushing the journal is a good way to get memory back, we don't want to be spinning, waiting on memory allocations. The buffers which are allocated via this mempool are fairly short lived, so that we'll recycle them pretty quickly. Although there are other memory allocations which occur during the journal flush process, this is the one which can potentially require the most memory, so the most important one to fix. The amount of memory reserved is a fixed amount, and we should not need to scale it when there are a greater number of filesystems in use. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-07GFS2: Flush pending glock work when evicting an inodeSteven Whitehouse
This ensures that we will not try to access the inode thats being flushed via the glock after it has been freed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-05GFS2: make sure rgrps are up to date in func gfs2_blk2rgrpdBob Peterson
This patch adds a call to gfs2_rindex_update from function gfs2_blk2rgrpd and removes calls to it that are made redundant by it. The problem is that a gfs2_grow can add rgrps to the rindex, then put those rgrps into use, thus rendering the rindex we read in at mount time incomplete. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-05GFS2: Eliminate sd_rindex_mutexBob Peterson
Over time, we've slowly eliminated the use of sd_rindex_mutex. Up to this point, it was only used in two places: function gfs2_ri_total (which totals the file system size by reading and parsing the rindex file) and function gfs2_rindex_update which updates the rgrps in memory. Both of these functions have the rindex glock to protect them, so the rindex is unnecessary. Since gfs2_grow writes to the rindex via the meta_fs, the mutex is in the wrong order according to the normal rules. This patch eliminates the mutex entirely to avoid the problem. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-01GFS2: Unlock rindex mutex on glock errorBob Peterson
This patch fixes an error path in function gfs2_rindex_update that leaves the rindex mutex held. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Make bd_cmp() staticSteven Whitehouse
Add missing static to bd_cmp() Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Sort the ordered write listBob Peterson
This patch sorts the ordered write list for GFS2 writes. This increases the throughput for simultaneous writes. For example, if you have ten processes, all doing: dd if=/dev/zero of=/mnt/gfs2/fileX on different files, the throughput will be much better. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: FITRIM ioctl supportSteven Whitehouse
The FITRIM ioctl provides an alternative way to send discard requests to the underlying device. Using the discard mount option results in every freed block generating a discard request to the block device. This can be slow, since many block devices can only process discard requests of larger sizes, and also such operations can be time consuming. Rather than using the discard mount option, FITRIM allows a sweep of the filesystem on an occasional basis, and also to optionally avoid sending down discard requests for smaller regions. In GFS2 FITRIM will work at resource group granularity. There is a flag for each resource group which keeps track of which resource groups have been trimmed. This flag is reset whenever a deallocation occurs in the resource group, and set whenever a successful FITRIM of that resource group has taken place. This helps to reduce repeated discard requests for the same block ranges, again improving performance. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Move two functions from log.c to lops.cSteven Whitehouse
gfs2_log_get_buf() and gfs2_log_fake_buf() are both used only in lops.c, so move them next to their callers and they can then become static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: glock statistics gatheringSteven Whitehouse
The stats are divided into two sets: those relating to the super block and those relating to an individual glock. The super block stats are done on a per cpu basis in order to try and reduce the overhead of gathering them. They are also further divided by glock type. In the case of both the super block and glock statistics, the same information is gathered in each case. The super block statistics are used to provide default values for most of the glock statistics, so that newly created glocks should have, as far as possible, a sensible starting point. The statistics are divided into three pairs of mean and variance, plus two counters. The mean/variance pairs are smoothed exponential estimates and the algorithm used is one which will be very familiar to those used to calculation of round trip times in network code. The three pairs of mean/variance measure the following things: 1. DLM lock time (non-blocking requests) 2. DLM lock time (blocking requests) 3. Inter-request time (again to the DLM) A non-blocking request is one which will complete right away, whatever the state of the DLM lock in question. That currently means any requests when (a) the current state of the lock is exclusive (b) the requested state is either null or unlocked or (c) the "try lock" flag is set. A blocking request covers all the other lock requests. There are two counters. The first is there primarily to show how many lock requests have been made, and thus how much data has gone into the mean/variance calculations. The other counter is counting queueing of holders at the top layer of the glock code. Hopefully that number will be a lot larger than the number of dlm lock requests issued. So why gather these statistics? There are several reasons we'd like to get a better idea of these timings: 1. To be able to better set the glock "min hold time" 2. To spot performance issues more easily 3. To improve the algorithm for selecting resource groups for allocation (to base it on lock wait time, rather than blindly using a "try lock") Due to the smoothing action of the updates, a step change in some input quantity being sampled will only fully be taken into account after 8 samples (or 4 for the variance) and this needs to be carefully considered when interpreting the results. Knowing both the time it takes a lock request to complete and the average time between lock requests for a glock means we can compute the total percentage of the time for which the node is able to use a glock vs. time that the rest of the cluster has its share. That will be very useful when setting the lock min hold time. The other point to remember is that all times are in nanoseconds. Great care has been taken to ensure that we measure exactly the quantities that we want, as accurately as possible. There are always inaccuracies in any measuring system, but I hope this is as accurate as we can reasonably make it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Read resource groups on mountSteven Whitehouse
This makes mount take slightly longer, but at the same time, the first write to the filesystem will be faster too. It also means that if there is a problem in the resource index, then we can refuse to mount rather than having to try and report that when the first write occurs. In addition, to avoid recursive locking, we hvae to take account of instances when the rindex glock may already be held when we are trying to update the rbtree of resource groups. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Ensure rindex is uptodate for fallocateBob Peterson
This patch fixes a problem whereby gfs2_grow was failing and causing GFS2 to assert. The problem was that when GFS2's fallocate operation tried to acquire an "allocation" it made sure the rindex was up to date, and if not, it called gfs2_rindex_update. However, if the file being fallocated was the rindex itself, it was already locked at that point. By calling gfs2_rindex_update at an earlier point in time, we bring rindex up to date and thereby avoid trying to lock it when the "allocation" is acquired. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Read in rindex if necessary during unlinkBob Peterson
This patch fixes a problem whereby you were unable to delete files until other file system operations were done (such as statfs, touch, writes, etc.) that caused the rindex to be read in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-02-28GFS2: Fix race between lru_list and glock ref countSteven Whitehouse
This patch fixes a narrow race window between the glock ref count hitting zero and glocks being removed from the lru_list. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11GFS2: Fix nlink setting on inode creationSteven Whitehouse
Since the nlink count will be 0, we need to use set_nlink rather than inc_nlink in order to avoid triggering the inc_nlink warning which was added recently. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11GFS2: fail mount if journal recovery failsDavid Teigland
If the first mounter fails to recover one of the journals during mount, the mount should fail. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11GFS2: let spectator mount do read only recoveryDavid Teigland
Previously, a spectator mount would not even attempt to do journal recovery for a failed node. This meant that if all mounted nodes were spectators, everyone would be stuck after a node failed, all waiting for recovery to be performed. This is unnecessary since the failed node had a clean journal. Instead, allow a spectator mount to do a partial "read only" recovery, which means it will check if the failed journal is clean, and if so, report a successful recovery. If the failed journal is not clean, it reports that journal recovery failed. This makes it work the same as a read only mount on a read only block device. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11GFS2: Fix a use-after-free that coverity spottedBob Peterson
In function gfs2_inplace_release it was trying to unlock a gfs2_holder structure associated with a reservation, after said reservation was freed. The problem is that the statements have the wrong order. This patch corrects the order so that the reservation is freed after the gfs2_holder is unlocked. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-11GFS2: dlm based recovery coordinationDavid Teigland
This new method of managing recovery is an alternative to the previous approach of using the userland gfs_controld. - use dlm slot numbers to assign journal id's - use dlm recovery callbacks to initiate journal recovery - use a dlm lock to determine the first node to mount fs - use a dlm lock to track journals that need recovery Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: add recovery callbacks dlm: add node slots and generation dlm: move recovery barrier calls dlm: convert rsb list to rb_tree
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: local functions should be static GFS2: We only need one ACL getting function GFS2: Fix multi-block allocation GFS2: decouple quota allocations from block allocations GFS2: split function rgblk_search GFS2: Fix up "off by one" in the previous patch GFS2: move toward a generic multi-block allocator GFS2: O_(D)SYNC support for fallocate GFS2: remove vestigial al_alloced GFS2: combine gfs2_alloc_block and gfs2_alloc_di GFS2: Add non-try locks back to get_local_rgrp GFS2: f_ra is always valid in dir readahead function GFS2: Fix very unlikley memory leak in ACL xattr code GFS2: More automated code analysis fixes GFS2: Add readahead to sequential directory traversal GFS2: Fix up REQ flags
2012-01-07vfs: switch ->show_options() to struct dentry *Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04dlm: add recovery callbacksDavid Teigland
These new callbacks notify the dlm user about lock recovery. GFS2, and possibly others, need to be aware of when the dlm will be doing lock recovery for a failed lockspace member. In the past, this coordination has been done between dlm and file system daemons in userspace, which then direct their kernel counterparts. These callbacks allow the same coordination directly, and more simply. Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04fs: propagate umode_t, misc bitsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch ->mknod() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch ->create() to umode_tAl Viro
vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch vfs_mkdir() and ->mkdir() to umode_tAl Viro
vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04vfs: fix the stupidity with i_dentry in inode destructorsAl Viro
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04vfs: mnt_drop_write_file()Al Viro
new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-04switch a bunch of places to mnt_want_write_file()Al Viro
it's both faster (in case when file has been opened for write) and cleaner. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-06GFS2: local functions should be staticH Hartley Sweeten
Quiets the sparse noise: warning: symbol 'gfs2_initxattrs' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-23GFS2: We only need one ACL getting functionSteven Whitehouse
There is no need to have two versions of this function with slightly different arguments. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22GFS2: Fix multi-block allocationSteven Whitehouse
Clean up gfs2_alloc_blocks so that it takes the full extent length rather than just the number of non-inode blocks as an argument. That will only make a difference in the inode allocation case for now. Also, this fixes the extent length handling around gfs2_alloc_extent() so that multi block allocations will work again. The rd_last_alloc block is set to the final block in the allocated extent (as per the update to i_goal, but referenced to a different start point). This also removes the dinode argument to rgblk_search() which is no longer used. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-22GFS2: decouple quota allocations from block allocationsBob Peterson
This patch separates the code pertaining to allocations into two parts: quota-related information and block reservations. This patch also moves all the block reservation structure allocations to function gfs2_inplace_reserve to simplify the code, and moves the frees to function gfs2_inplace_release. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-21freezer: unexport refrigerator() and update try_to_freeze() slightlyTejun Heo
There is no reason to export two functions for entering the refrigerator. Calling refrigerator() instead of try_to_freeze() doesn't save anything noticeable or removes any race condition. * Rename refrigerator() to __refrigerator() and make it return bool indicating whether it scheduled out for freezing. * Update try_to_freeze() to return bool and relay the return value of __refrigerator() if freezing(). * Convert all refrigerator() users to try_to_freeze(). * Update documentation accordingly. * While at it, add might_sleep() to try_to_freeze(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@infradead.org>