summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)Author
2016-08-07fs: return EPERM on immutable inodeEryu Guan
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-24Merge tag 'gfs2-4.7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Bob Peterson: "We've got ten patches this time, half of which are related to a plethora of nasty outcomes when inodes are transitioned from the unlinked state to the free state. Small file systems are particularly vulnerable to these problems, and it can manifest as mainly hangs, but also file system corruption. The patches have been tested for literally many weeks, with a very gruelling test, so I have a high level of confidence. - Andreas Gruenbacher wrote a series of five patches for various lockups during the transition of inodes from unlinked to free. The main patch is titled "Fix gfs2_lookup_by_inum lock inversion" and the other four are support and cleanup patches related to that. - Ben Marzinski contributed two patches with regard to a recreatable problem when gfs2 tries to write a page to a file that is being truncated, resulting in a BUG() in gfs2_remove_from_journal. Note that Ben had to export vfs function __block_write_full_page to get this to work properly. It's been posted a long time and he talked to various VFS people about it, and nobody seemed to mind. - I contributed 3 patches: o The first one fixes a memory corruptor: a race in which one process can overwrite the gl_object pointer set by another process, causing kernel panic and other symptoms. o The second patch fixes another race that resulted in a false-positive BUG_ON. This occurred when resource group reservations were freed by one process while another process was trying to grab a new reservation in the same resource group. o The third patch fixes a problem with doing journal replay when the journals are not all the same size" * tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes GFS2: Check rs_free with rd_rsspin protection gfs2: writeout truncated pages fs: export __block_write_full_page gfs2: Lock holder cleanup gfs2: Large-filesystem fix for 32-bit systems gfs2: Get rid of gfs2_ilookup gfs2: Fix gfs2_lookup_by_inum lock inversion gfs2: Initialize iopen glock holder for new inodes GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
2016-07-21GFS2: Fix gfs2_replay_incr_blk for multiple journal sizesBob Peterson
Before this patch, if you used gfs2_jadd to add new journals of a size smaller than the existing journals, replaying those new journals would withdraw. That's because function gfs2_replay_incr_blk was using the number of journal blocks (jd_block) from the superblock's journal pointer. In other words, "My journal's max size" rather than "the journal we're replaying's size." This patch changes the function to use the size of the pertinent journal rather than always using the journal we happen to be using. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-07-20block: get rid of bio_rw and READAChristoph Hellwig
These two are confusing leftover of the old world order, combining values of the REQ_OP_ and REQ_ namespaces. For callers that don't special case we mostly just replace bi_rw with bio_data_dir or op_is_write, except for the few cases where a switch over the REQ_OP_ values makes more sense. Any check for READA is replaced with an explicit check for REQ_RAHEAD. Also remove the READA alias for REQ_RAHEAD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12GFS2: Check rs_free with rd_rsspin protectionBob Peterson
For the last process to close a file opened for write, function gfs2_rsqa_delete was deleting the file's inode's block reservation out of the rgrp reservations tree. Then it was checking to make sure rs_free was 0, but it was performing the check outside the protection of rd_rsspin spin_lock. The rd_rsspin spin_lock protection is needed to prevent a race between the process freeing the reservation and another who is allocating a new set of blocks inside the same rgrp for the same inode, thus changing its value. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-07-05Use the right predicate in ->atomic_open() instancesAl Viro
->atomic_open() can be given an in-lookup dentry *or* a negative one found in dcache. Use d_in_lookup() to tell one from another, rather than d_unhashed(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-27gfs2: writeout truncated pagesBenjamin Marzinski
When gfs2 attempts to write a page to a file that is being truncated, and notices that the page is completely outside of the file size, it tries to invalidate it. However, this may require a transaction for journaled data files to revoke any buffers from the page on the active items list. Unfortunately, this can happen inside a log flush, where a transaction cannot be started. Also, gfs2 may need to be able to remove the buffer from the ail1 list before it can finish the log flush. To deal with this, when writing a page of a file with data journalling enabled gfs2 now skips the check to see if the write is outside the file size, and simply writes it anyway. This situation can only occur when the truncate code still has the file locked exclusively, and hasn't marked this block as free in the metadata (which happens later in truc_dealloc). After gfs2 writes this page out, the truncation code will shortly invalidate it and write out any revokes if necessary. To do this, gfs2 now implements its own version of block_write_full_page without the check, and calls the newly exported __block_write_full_page. It also no longer calls gfs2_writepage_common from gfs2_jdata_writepage. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27gfs2: Lock holder cleanupAndreas Gruenbacher
Make the code more readable by cleaning up the different ways of initializing lock holders and checking for initialized lock holders: mark lock holders as uninitialized by setting the holder's glock to NULL (gfs2_holder_mark_uninitialized) instead of zeroing out the entire object or using a separate flag. Recognize initialized holders by their non-NULL glock (gfs2_holder_initialized). Don't zero out holder objects which are immeditiately initialized via gfs2_holder_init or gfs2_glock_nq_init. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27gfs2: Large-filesystem fix for 32-bit systemsAndreas Gruenbacher
Commit ff34245d switched from iget5_locked to iget_locked among other things, but iget_locked doesn't work for filesystems larger than 2^32 blocks on 32-bit systems. Switch back to iget5_locked. Filesystems larger than 2^32 blocks are unrealistic to work well on 32-bit systems, so this is mostly a code cleanliness fix. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27gfs2: Get rid of gfs2_ilookupAndreas Gruenbacher
Now that gfs2_lookup_by_inum only takes the inode glock for new inodes (and not for cached inodes anymore), there no longer is a need to optimize the cached-inode case in gfs2_get_dentry or delete_work_func, and gfs2_ilookup can be removed. In addition, gfs2_get_dentry wasn't checking the GFS2_DIF_SYSTEM flag in i_diskflags in the gfs2_ilookup case (see gfs2_lookup_by_inum); this inconsistency goes away as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-27gfs2: Fix gfs2_lookup_by_inum lock inversionAndreas Gruenbacher
The current gfs2_lookup_by_inum takes the glock of a presumed inode identified by block number, verifies that the block is indeed an inode, and then instantiates and reads the new inode via gfs2_inode_lookup. However, instantiating a new inode may block on freeing a previous instance of that inode (__wait_on_freeing_inode), and freeing an inode requires to take the glock already held, leading to lock inversion and deadlock. Fix this by first instantiating the new inode, then verifying that the block is an inode (if required), and then reading in the new inode, all in gfs2_inode_lookup. If the block we are looking for is not an inode, we discard the new inode via iget_failed, which marks inodes as bad and unhashes them. Other tasks waiting on that inode will get back a bad inode back from ilookup or iget_locked; in that case, retry the lookup. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-17gfs2: Initialize iopen glock holder for new inodesAndreas Gruenbacher
In gfs2_init_inode_once, initialize inode->i_iopen_gh.gh_gl to NULL: otherwise, when gfs2_inode_lookup fails, the iopen glock holder can remain unset and iget_failed can end up accessing random memory. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-10GFS2: don't set rgrp gl_object until it's inserted into rgrp treeBob Peterson
Before this patch, function read_rindex_entry would set a rgrp glock's gl_object pointer to itself before inserting the rgrp into the rgrp rbtree. The problem is: if another process was also reading the rgrp in, and had already inserted its newly created rgrp, then the second call to read_rindex_entry would overwrite that value, then return a bad return code to the caller. Later, other functions would reference the now-freed rgrp memory by way of gl_object. In some cases, that could result in gfs2_rgrp_brelse being called twice for the same rgrp: once for the failed attempt and once for the "real" rgrp release. Eventually the kernel would panic. There are also a number of other things that could go wrong when a kernel module is accessing freed storage. For example, this could result in rgrp corruption because the fake rgrp would point to a fake bitmap in memory too, causing gfs2_inplace_reserve to search some random memory for free blocks, and find some, since we were never setting rgd->rd_bits to NULL before freeing it. This patch fixes the problem by not setting gl_object until we have successfully inserted the rgrp into the rbtree. Also, it sets rd_bits to NULL as it frees them, which will ensure any accidental access to the wrong rgrp will result in a kernel panic rather than file system corruption, which is preferred. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-07gfs2: use bio op accessorsMike Christie
Separate the op from the rq_flag_bits and have gfs2 set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Followups to the parallel lookup work: - update docs - restore killability of the places that used to take ->i_mutex killably now that we have down_write_killable() merged - Additionally, it turns out that I missed a prerequisite for security_d_instantiate() stuff - ->getxattr() wasn't the only thing that could be called before dentry is attached to inode; with smack we needed the same treatment applied to ->setxattr() as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->setxattr() to passing dentry and inode separately switch xattr_handler->set() to passing dentry and inode separately restore killability of old mutex_lock_killable(&inode->i_mutex) users add down_write_killable_nested() update D/f/directory-locking
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27switch xattr_handler->set() to passing dentry and inode separatelyAl Viro
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-20Merge tag 'gfs2-4.7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We've got nine patches this time: - Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment). - Ben Marzinski has a patch which allows the proper unmount of a GFS2 file system after hitting a withdraw error. - I have a patch to fix a problem where GFS2 would dereference an error value, plus three cosmetic / refactoring patches. - Daniel DeFreez has a patch to fix two glock reference count problems, where GFS2 was not properly "uninitializing" its glock holder on error paths. - Denys Vlasenko has a patch to change a function to not be inlined, thus reducing the memory footprint of the GFS2 module" * tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Refactor gfs2_remove_from_journal GFS2: Remove allocation parms from gfs2_rbm_find gfs2: use inode_lock/unlock instead of accessing i_mutex directly GFS2: Add calls to gfs2_holder_uninit in two error handlers GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read() GFS2: Get rid of dead code in inode_go_demote_ok GFS2: ignore unlock failures after withdraw
2016-05-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull remaining vfs xattr work from Al Viro: "The rest of work.xattr (non-cifs conversions)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: btrfs: Switch to generic xattr handlers ubifs: Switch to generic xattr handlers jfs: Switch to generic xattr handlers jfs: Clean up xattr name mapping gfs2: Switch to generic xattr handlers ceph: kill __ceph_removexattr() ceph: Switch to generic xattr handlers ceph: Get rid of d_find_alias in ceph_set_acl
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-05-17Merge branch 'work.preadv2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs cleanups from Al Viro: "More cleanups from Christoph" * 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nfsd: use RWF_SYNC fs: add RWF_DSYNC aand RWF_SYNC ceph: use generic_write_sync fs: simplify the generic_write_sync prototype fs: add IOCB_SYNC and IOCB_DSYNC direct-io: remove the offset argument to dio_complete direct-io: eliminate the offset argument to ->direct_IO xfs: eliminate the pos variable in xfs_file_dio_aio_write filemap: remove the pos argument to generic_file_direct_write filemap: remove pos variables in generic_file_read_iter
2016-05-13gfs2: Switch to generic xattr handlersAl Viro
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-12gfs2: switch to ->iterate_shared()Al Viro
protected by glock and already used without locking the directory by gfs2_get_name() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-06GFS2: Refactor gfs2_remove_from_journalBob Peterson
This patch makes two simple changes to function gfs2_remove_from_journal. First, it removes the parameter that specifies the transaction. Since it's always passed in as current->journal_info, we might as well set that in the function rather than passing it in. Second, it changes the meta parameter to use an enum to make the code more clear. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-05-02parallel lookups: actual switch to rwsemAl Viro
ta-da! The main issue is the lack of down_write_killable(), so the places like readdir.c switched to plain inode_lock(); once killable variants of rwsem primitives appear, that'll be dealt with. lockdep side also might need more work Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-02Merge getxattr prototype change into work.lookupsAl Viro
The rest of work.xattr stuff isn't needed for this branch
2016-05-02GFS2: Remove allocation parms from gfs2_rbm_findBob Peterson
Struct gfs2_alloc_parms ap is never referenced in function gfs2_rbm_find, so this patch removes it. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-05-02gfs2: use inode_lock/unlock instead of accessing i_mutex directlyAbhi Das
i_mutex has been replaced by i_rwsem and directly accessing the non-existent i_mutex breaks the kernel build. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-05-01fs: add IOCB_SYNC and IOCB_DSYNCChristoph Hellwig
This will allow us to do per-I/O sync file writes, as required by a lot of fileservers or storage targets. XXX: Will need a few additional audits for O_DSYNC Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01direct-io: eliminate the offset argument to ->direct_IOChristoph Hellwig
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually work, so eliminate the superflous argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-19GFS2: Add calls to gfs2_holder_uninit in two error handlersDaniel DeFreez
This patch fixes two locations that do not call gfs2_holder_uninit if gfs2_glock_nq returns an error. Signed-off-by: Daniel DeFreez <dcdefreez@ucdavis.edu> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-14GFS2: Don't dereference inode in gfs2_inode_lookup until it's validBob Peterson
Function gfs2_inode_lookup was dereferencing the inode, and after, it checks for the value being NULL. We need to check that first. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-12GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytesDenys Vlasenko
This function compiles to 522 bytes of machine code. Error paths are not very time critical. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-11->getxattr(): pass dentry and inode as separate argumentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11xattr_handler: pass dentry and inode as separate arguments of ->get()Al Viro
... and do not assume they are already attached to each other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10don't bother with ->d_inode->i_sb - it's always equal to ->d_sbAl Viro
... and neither can ever be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-04-05gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read()Abhi Das
gfs2_file_splice_read() f_op grabs and releases the cluster-wide inode glock to sync the inode size to the latest. Without this, generic_file_splice_read() uses an older i_size value and can return EOF for valid offsets in the inode. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-05GFS2: Get rid of dead code in inode_go_demote_okBob Peterson
Function inode_go_demote_ok had some code that was only executed if gl_holders was not empty. However, if gl_holders was not empty, the only caller, demote_ok(), returns before inode_go_demote_ok would ever be called. Therefore, it's dead code, so I removed it. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-24GFS2: ignore unlock failures after withdrawBenjamin Marzinski
After gfs2 has withdrawn the filesystem, it may still have many locks not in the unlocked state. If it is using lock_dlm, it will failed trying the unlocks since it has already unmounted the lock manager. Instead, it should set the SDF_SKIP_DLM_UNLOCK flag on withdraw, to signal that it can skip the lock_manager on unlocks, and failback to lock_nolock style unlocking. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-03-17Merge tag 'gfs2-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We only have six patches ready for this merge window: - Arnd Bergmann contributed a patch that fixes an uninitialized variable warning. - The second patch avoids a kernel panic due to referencing an iopen glock that may not be held, in an error path. - The third patch fixes a rounding error that caused xfs_tests direct IO write "fsx" tests to fail on GFS2. - The fourth patch tidies up the code path when glocks are being reused to recreate a dinode that was recently deleted. - The fifth reverts an ages-old patch that should no longer be needed, and which interfered with the transition of dinodes from unlinked to free. - And lastly, a patch to eliminate a function parameter that's not needed" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Eliminate parameter non_block on gfs2_inode_lookup GFS2: Don't filter out I_FREEING inodes anymore GFS2: Prevent delete work from occurring on glocks used for create GFS2: Fix direct IO write rounding error gfs2: avoid uninitialized variable warning GFS2: Check if iopen is held when deleting inode
2016-03-15GFS2: Eliminate parameter non_block on gfs2_inode_lookupBob Peterson
Now that we're not filtering out I_FREEING inodes from our lookups anymore, we can eliminate the non_block parameter from the lookup function. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-03-15GFS2: Don't filter out I_FREEING inodes anymoreBob Peterson
This patch basically reverts a very old patch from 2008, 7a9f53b3c1875bef22ad4588e818bc046ef183da, with the title "Alternate gfs2_iget to avoid looking up inodes being freed". The original patch was designed to avoid a deadlock caused by lock ordering with try_rgrp_unlink. The patch forced the function to not find inodes that were being removed by VFS. The problem is, that made it impossible for nodes to delete their own unlinked dinodes after a certain point in time, because the inode needed was not found by this filtering process. There is no longer a need for the patch, since function try_rgrp_unlink no longer locks the inode: All it does is queue the glock onto the delete work_queue, so there should be no more deadlock. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>