summaryrefslogtreecommitdiff
path: root/fs/jbd2
AgeCommit message (Collapse)Author
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-13jbd2: do not fail journal because of frozen_buffer allocation failureMichal Hocko
Journal transaction might fail prematurely because the frozen_buffer is allocated by GFP_NOFS request: [ 72.440013] do_get_write_access: OOM for frozen_buffer [ 72.440014] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.440015] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4735: Out of memory (...snipped....) [ 72.495559] do_get_write_access: OOM for frozen_buffer [ 72.495560] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.496839] do_get_write_access: OOM for frozen_buffer [ 72.496841] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.505766] Aborting journal on device sda1-8. [ 72.505851] EXT4-fs (sda1): Remounting filesystem read-only This wasn't a problem until "mm: page_alloc: do not lock up GFP_NOFS allocations upon OOM" because small GPF_NOFS allocations never failed. This allocation seems essential for the journal and GFP_NOFS is too restrictive to the memory allocator so let's use __GFP_NOFAIL here to emulate the previous behavior. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-10jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount pathOGAWA Hirofumi
On umount path, jbd2_journal_destroy() writes latest transaction ID (->j_tail_sequence) to be used at next mount. The bug is that ->j_tail_sequence is not holding latest transaction ID in some cases. So, at next mount, there is chance to conflict with remaining (not overwritten yet) transactions. mount (id=10) write transaction (id=11) write transaction (id=12) umount (id=10) <= the bug doesn't write latest ID mount (id=10) write transaction (id=11) crash mount [recovery process] transaction (id=11) transaction (id=12) <= valid transaction ID, but old commit must not replay Like above, this bug become the cause of recovery failure, or FS corruption. So why ->j_tail_sequence doesn't point latest ID? Because if checkpoint transactions was reclaimed by memory pressure (i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated. (And another case is, __jbd2_journal_clean_checkpoint_list() is called with empty transaction.) So in above cases, ->j_tail_sequence is not pointing latest transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not done too. So, to fix this problem with minimum changes, this patch updates ->j_tail_sequence, and issue REQ_FLUSH. (With more complex changes, some optimizations would be possible to avoid unnecessary REQ_FLUSH for example though.) BTW, journal->j_tail_sequence = ++journal->j_transaction_sequence; Increment of ->j_transaction_sequence seems to be unnecessary, but ext3 does this. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-02-23jbd2: save some atomic ops in __JI_COMMIT_RUNNING handlingJan Kara
Currently we used atomic bit operations to manipulate __JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are always written and read under j_list_lock. So just change the operations to standard bit operations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-23jbd2: unify revoke and tag block checksum handlingJan Kara
Revoke and tag descriptor blocks are just different kinds of descriptor blocks and thus have checksum in the same place. Unify computation and checking of checksums for these. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-23jbd2: factor out common descriptor block initializationJan Kara
Descriptor block header is initialized in several places. Factor out the common code into jbd2_journal_get_descriptor_buffer(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-23jbd2: remove unnecessary arguments of jbd2_journal_write_revoke_recordsJan Kara
jbd2_journal_write_revoke_records() takes journal pointer and write_op, although journal can be obtained from the passed transaction and write_op is always WRITE_SYNC. Remove these superfluous arguments. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-01-06fs: use block_device name vsprintf helperDmitry Monakhov
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes for v4.4, including fixes for post-2038 time encodings, some endian conversion problems with ext4 encryption, potential memory leaks after truncate in data=journal mode, and an ocfs2 regression caused by a jbd2 performance improvement" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix null committed data return in undo_access ext4: add "static" to ext4_seq_##name##_fops struct ext4: fix an endianness bug in ext4_encrypted_follow_link() ext4: fix an endianness bug in ext4_encrypted_zeroout() jbd2: Fix unreclaimed pages after truncate in data=journal mode ext4: Fix handling of extended tv_sec
2015-12-04jbd2: fix null committed data return in undo_accessJunxiao Bi
introduced jbd2_write_access_granted() to improve write|undo_access speed, but missed to check the status of b_committed_data which caused a kernel panic on ocfs2. [ 6538.405938] ------------[ cut here ]------------ [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400! [ 6538.406686] invalid opcode: 0000 [#1] SMP [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core syscopyarea dm_mirror dm_region_hash dm_log dm_mod [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1 [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti: ffff880075b78000 [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246 [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX: ffffffffa06e6df0 [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI: ffff88007a760430 [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09: 0000000000000001 [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12: 0000000000000001 [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15: ffff88007a6f6ea0 [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000) knlGS:0000000000000000 [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4: 00000000000406e0 [ 6538.406686] Stack: [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0 ffff88006c640800 [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878 ffffffffa06a309d [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898 0000000000000000 [ 6538.406686] Call Trace: [ 6538.406686] [<ffffffffa06a309d>] ? ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] [ 6538.406686] [<ffffffffa06a3654>] _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2] [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2] [ 6538.406686] [<ffffffffa065072c>] ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2] [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2] [ 6538.406686] [<ffffffffa0654600>] __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2] [ 6538.406686] [<ffffffffa0654394>] ? ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2] [ 6538.406686] [<ffffffffa065acd4>] ocfs2_remove_btree_range+0x374/0x630 [ocfs2] [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2] [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670 [ocfs2] [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20 [ocfs2] [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2] [ 6538.406686] [<ffffffffa01759e4>] ? jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2] [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2] [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50 [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340 [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80 [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90 [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110 [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120 [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10 [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 6538.406686] RIP [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP <ffff880075b7b7f8> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]--- [ 6538.694492] Kernel panic - not syncing: Fatal exception [ 6538.695484] Kernel Offset: disabled Fixes: de92c8caf16c("jbd2: speedup jbd2_journal_get_[write|undo]_access()") Cc: <stable@vger.kernel.org> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-11-24jbd2: Fix unreclaimed pages after truncate in data=journal modeJan Kara
Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b794130b130e77ffa975bb58cb843744f9ae5 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-11-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
2015-11-07mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-18ext4, jbd2: ensure entering into panic after recording an error in superblockDaeho Jeong
If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: Hobin Woo <hobin.woo@samsung.com> Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-10-18jbd2: fix checkpoint list cleanupJan Kara
Unlike comments and expectation of callers journal_clean_one_cp_list() returned 1 not only if it freed the transaction but also if it freed some buffers in the transaction. That could make __jbd2_journal_clean_checkpoint_list() skip processing t_checkpoint_io_list and continue with processing the next transaction. This is mostly a cosmetic issue since the only result is we can sometimes free less memory than we could. But it's still worth fixing. Fix journal_clean_one_cp_list() to return 1 only if the transaction was really freed. Fixes: 50849db32a9f529235a84bcc84a6b8e631b1d0ec Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-10-17jbd2: clean up feature test macros with predicate functionsDarrick J. Wong
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17ext4: call out CRC and corruption errors with specific error codesDarrick J. Wong
Instead of overloading EIO for CRC errors and corrupt structures, return the same error codes that XFS returns for the same issues. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-15jbd2: gate checksum calculations on crc driver presence, not sb flagsDarrick J. Wong
Change the journal's checksum functions to gate on whether or not the crc32c driver is loaded, and gate the loading on the superblock bits. This prevents a journal crash if someone loads a journal in no-csum mode and then randomizes the superblock, thus flipping on the feature bits. Tested-By: Nikolay Borisov <kernel@kyup.com> Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-08-04jbd2: limit number of reserved creditsLukas Czerner
Currently there is no limitation on number of reserved credits we can ask for. If we ask for more reserved credits than 1/2 of maximum transaction size, or if total number of credits exceeds the maximum transaction size per operation (which is currently only possible with the former) we will spin forever in start_this_handle(). Fix this by adding this limitation at the start of start_this_handle(). This patch also removes the credit limitation 1/2 of maximum transaction size, since we really only want to limit the number of reserved credits. There is not much point to limit the credits if there is still space in the journal. This accidentally also fixes the online resize, where due to the limitation of the journal credits we're unable to grow file systems with 1k block size and size between 16M and 32M. It has been partially fixed by 2c869b262a10ca99cb866d04087d75311587a30c, but not entirely. Thanks Jan Kara for helping me getting the correct fix. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-28jbd2: avoid infinite loop when destroying aborted journalJan Kara
Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal superblock fails" changed jbd2_cleanup_journal_tail() to return EIO when the journal is aborted. That makes logic in jbd2_log_do_checkpoint() bail out which is fine, except that jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make a progress in cleaning the journal. Without it jbd2_journal_destroy() just loops in an infinite loop. Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of jbd2_log_do_checkpoint() fails with error. Reported-by: Eryu Guan <guaneryu@gmail.com> Tested-by: Eryu Guan <guaneryu@gmail.com> Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-23ext4, jbd2: add REQ_FUA flag when recording an error in the superblockDaeho Jeong
When an error condition is detected, an error status should be recorded into superblocks of EXT4 or JBD2. However, the write request is submitted now without REQ_FUA flag, even in "barrier=1" mode, which is followed by panic() function in "errors=panic" mode. On mobile devices which make whole system reset as soon as kernel panic occurs, this write request containing an error flag will disappear just from storage cache without written to the physical cells. Therefore, when next start, even forever, the error flag cannot be shown in both superblocks, and e2fsck cannot fix the filesystem problems automatically, unless e2fsck is executed in force checking mode. [ Changed use test_opt(sb, BARRIER) of checking the journal flags -- TYT ] Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-07-12jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara
It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. [ Note: this is a fixed version of commit 2143c1965a761, which was reverted in ebeaa8ddb3663b5 due to a false positive triggering of an assertion check. -- Ted ] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-27Revert "jbd2: speedup jbd2_journal_dirty_metadata()"Linus Torvalds
This reverts commit 2143c1965a761332ae417b22fd477b636e4f54ec. This commit seems to be the cause of the following jbd2 assertion failure: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1325! invalid opcode: 0000 [#1] SMP Modules linked in: bnep bluetooth fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 ... CPU: 7 PID: 5509 Comm: gcc Not tainted 4.1.0-10944-g2a298679b411 #1 Hardware name: /DH87RL, BIOS RLH8710H.86A.0327.2014.0924.1645 09/24/2014 task: ffff8803bf866040 ti: ffff880308528000 task.ti: ffff880308528000 RIP: jbd2_journal_dirty_metadata+0x237/0x290 Call Trace: __ext4_handle_dirty_metadata+0x43/0x1f0 ext4_handle_dirty_dirent_node+0xde/0x160 ? jbd2_journal_get_write_access+0x36/0x50 ext4_delete_entry+0x112/0x160 ? __ext4_journal_start_sb+0x52/0xb0 ext4_unlink+0xfa/0x260 vfs_unlink+0xec/0x190 do_unlinkat+0x24a/0x270 SyS_unlink+0x11/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a ---[ end trace ae033ebde8d080b4 ]--- which is not easily reproducible (I've seen it just once, and then Ted was able to reproduce it once). Revert it while Ted and Jan try to figure out what is wrong. Cc: Jan Kara <jack@suse.cz> Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge second patchbomb from Andrew Morton: - most of the rest of MM - lots of misc things - procfs updates - printk feature work - updates to get_maintainer, MAINTAINERS, checkpatch - lib/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) exit,stats: /* obey this comment */ coredump: add __printf attribute to cn_*printf functions coredump: use from_kuid/kgid when formatting corename fs/reiserfs: remove unneeded cast NILFS2: support NFSv2 export fs/befs/btree.c: remove unneeded initializations fs/minix: remove unneeded cast init/do_mounts.c: add create_dev() failure log kasan: remove duplicate definition of the macro KASAN_FREE_PAGE fs/efs: femove unneeded cast checkpatch: emit "NOTE: <types>" message only once after multiple files checkpatch: emit an error when there's a diff in a changelog checkpatch: validate MODULE_LICENSE content checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr() checkpatch: fix processing of MEMSET issues checkpatch: suggest using ether_addr_equal*() checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files checkpatch: remove local from codespell path checkpatch: add --showfile to allow input via pipe to show filenames ...
2015-06-26fs/jbd2/journal.c: use strreplace()Rasmus Villemoes
In one case, we eliminate a local variable; in the other a strlen() call and some .text. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-21jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara
It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-15jbd2: get rid of open coded allocation retry loopMichal Hocko
insert_revoke_hash does an open coded endless allocation loop if journal_oom_retry is true. It doesn't implement any allocation fallback strategy between the retries, though. The memory allocator doesn't know about the never fail requirement so it cannot potentially help to move on with the allocation (e.g. use memory reserves). Get rid of the retry loop and use __GFP_NOFAIL instead. We will lose the debugging message but I am not sure it is anyhow helpful. Do the same for journal_alloc_journal_head which is doing a similar thing. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-15jbd2: fix ocfs2 corrupt when updating journal superblock failsJoseph Qi
If updating journal superblock fails after journal data has been flushed, the error is omitted and this will mislead the caller as a normal case. In ocfs2, the checkpoint will be treated successfully and the other node can get the lock to update. Since the sb_start is still pointing to the old log block, it will rewrite the journal data during journal recovery by the other node. Thus the new updates will be overwritten and ocfs2 corrupts. So in above case we have to return the error, and ocfs2_commit_cache will take care of the error and prevent the other node to do update first. And only after recovering journal it can do the new updates. The issue discussion mail can be found at: https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html http://comments.gmane.org/gmane.comp.file-systems.ext4/48841 [ Fixed bug in patch which allowed a non-negative error return from jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this was causing xfstests ext4/306 to fail. -- Ted ] Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: stable@vger.kernel.org
2015-06-15jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()Dmitry Monakhov
jbd2_cleanup_journal_tail() can be invoked by jbd2__journal_start() So allocations should be done with GFP_NOFS [Full stack trace snipped from 3.10-rh7] [<ffffffff815c4bd4>] dump_stack+0x19/0x1b [<ffffffff8105dba1>] warn_slowpath_common+0x61/0x80 [<ffffffff8105dcca>] warn_slowpath_null+0x1a/0x20 [<ffffffff815c2142>] slab_pre_alloc_hook.isra.31.part.32+0x15/0x17 [<ffffffff8119c045>] kmem_cache_alloc+0x55/0x210 [<ffffffff811477f5>] ? mempool_alloc_slab+0x15/0x20 [<ffffffff811477f5>] mempool_alloc_slab+0x15/0x20 [<ffffffff81147939>] mempool_alloc+0x69/0x170 [<ffffffff815cb69e>] ? _raw_spin_unlock_irq+0xe/0x20 [<ffffffff8109160d>] ? finish_task_switch+0x5d/0x150 [<ffffffff811f1a8e>] bio_alloc_bioset+0x1be/0x2e0 [<ffffffff8127ee49>] blkdev_issue_flush+0x99/0x120 [<ffffffffa019a733>] jbd2_cleanup_journal_tail+0x93/0xa0 [jbd2] -->GFP_KERNEL [<ffffffffa019aca1>] jbd2_log_do_checkpoint+0x221/0x4a0 [jbd2] [<ffffffffa019afc7>] __jbd2_log_wait_for_space+0xa7/0x1e0 [jbd2] [<ffffffffa01952d8>] start_this_handle+0x2d8/0x550 [jbd2] [<ffffffff811b02a9>] ? __memcg_kmem_put_cache+0x29/0x30 [<ffffffff8119c120>] ? kmem_cache_alloc+0x130/0x210 [<ffffffffa019573a>] jbd2__journal_start+0xba/0x190 [jbd2] [<ffffffff811532ce>] ? lru_cache_add+0xe/0x10 [<ffffffffa01c9549>] ? ext4_da_write_begin+0xf9/0x330 [ext4] [<ffffffffa01f2c77>] __ext4_journal_start_sb+0x77/0x160 [ext4] [<ffffffffa01c9549>] ext4_da_write_begin+0xf9/0x330 [ext4] [<ffffffff811446ec>] generic_file_buffered_write_iter+0x10c/0x270 [<ffffffff81146918>] __generic_file_write_iter+0x178/0x390 [<ffffffff81146c6b>] __generic_file_aio_write+0x8b/0xb0 [<ffffffff81146ced>] generic_file_aio_write+0x5d/0xc0 [<ffffffffa01bf289>] ext4_file_write+0xa9/0x450 [ext4] [<ffffffff811c31d9>] ? pipe_read+0x379/0x4f0 [<ffffffff811b93f0>] do_sync_write+0x90/0xe0 [<ffffffff811b9b6d>] vfs_write+0xbd/0x1e0 [<ffffffff811ba5b8>] SyS_write+0x58/0xb0 [<ffffffff815d4799>] system_call_fastpath+0x16/0x1b Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2015-06-08jbd2: speedup jbd2_journal_get_[write|undo]_access()Jan Kara
jbd2_journal_get_write_access() and jbd2_journal_get_create_access() are frequently called for buffers that are already part of the running transaction - most frequently it is the case for bitmaps, inode table blocks, and superblock. Since in such cases we have nothing to do, it is unfortunate we still grab reference to journal head, lock the bh, lock bh_state only to find out there's nothing to do. Improving this is a bit subtle though since until we find out journal head is attached to the running transaction, it can disappear from under us because checkpointing / commit decided it's no longer needed. We deal with this by protecting journal_head slab with RCU. We still have to be careful about journal head being freed & reallocated within slab and about exposing journal head in consistent state (in particular b_modified and b_frozen_data must be in correct state before we allow user to touch the buffer). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-08jbd2: more simplifications in do_get_write_access()Jan Kara
Check for the simple case of unjournaled buffer first, handle it and bail out. This allows us to remove one if and unindent the difficult case by one tab. The result is easier to read. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-08jbd2: simplify error path on allocation failure in do_get_write_access()Jan Kara
We were acquiring bh_state_lock when allocation of buffer failed in do_get_write_access() only to be able to jump to a label that releases the lock and does all other checks that don't make sense for this error path. Just jump into the right label instead. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-08jbd2: simplify code flow in do_get_write_access()Jan Kara
needs_copy is set only in one place in do_get_write_access(), just move the frozen buffer copying into that place and factor it out to a separate function to make do_get_write_access() slightly more readable. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-08jbd2: revert must-not-fail allocation loops back to GFP_NOFAILMichal Hocko
This basically reverts 47def82672b3 (jbd2: Remove __GFP_NOFAIL from jbd2 layer). The deprecation of __GFP_NOFAIL was a bad choice because it led to open coding the endless loop around the allocator rather than removing the dependency on the non failing allocation. So the deprecation was a clear failure and the reality tells us that __GFP_NOFAIL is not even close to go away. It is still true that __GFP_NOFAIL allocations are generally discouraged and new uses should be evaluated and an alternative (pre-allocations or reservations) should be considered but it doesn't make any sense to lie the allocator about the requirements. Allocator can take steps to help making a progress if it knows the requirements. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Acked-by: David Rientjes <rientjes@google.com>
2015-05-14jbd2: fix r_count overflows leading to buffer overflow in journal recoveryDarrick J. Wong
The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2015-05-14ext4: fix NULL pointer dereference when journal restart failsLukas Czerner
Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2015-01-19jbd2: complain about descriptor block checksum errorsDarrick J. Wong
We should complain in dmesg when journal recovery fails on account of the descriptor block being corrupt, so that the diagnostic data can be recovered. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-12Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Lots of bugs fixes, including Zheng and Jan's extent status shrinker fixes, which should improve CPU utilization and potential soft lockups under heavy memory pressure, and Eric Whitney's bigalloc fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits) ext4: ext4_da_convert_inline_data_to_extent drop locked page after error ext4: fix suboptimal seek_{data,hole} extents traversial ext4: ext4_inline_data_fiemap should respect callers argument ext4: prevent fsreentrance deadlock for inline_data ext4: forbid journal_async_commit in data=ordered mode jbd2: remove unnecessary NULL check before iput() ext4: Remove an unnecessary check for NULL before iput() ext4: remove unneeded code in ext4_unlink ext4: don't count external journal blocks as overhead ext4: remove never taken branch from ext4_ext_shift_path_extents() ext4: create nojournal_checksum mount option ext4: update comments regarding ext4_delete_inode() ext4: cleanup GFP flags inside resize path ext4: introduce aging to extent status tree ext4: cleanup flag definitions for extent status tree ext4: limit number of scanned extents in status tree shrinker ext4: move handling of list of shrinkable inodes into extent status code ext4: change LRU to round-robin in extent status tree shrinker ext4: cache extent hole in extent status tree for ext4_da_map_blocks() ext4: fix block reservation for bigalloc filesystems ...
2014-12-02jbd2: fix regression where we fail to initialize checksum seed when loadingDarrick J. Wong
When we're enabling journal features, we cannot use the predicate jbd2_journal_has_csum_v2or3() because we haven't yet set the sb feature flag fields! Moreover, we just finished loading the shash driver, so the test is unnecessary; calculate the seed always. Without this patch, we fail to initialize the checksum seed the first time we turn on journal_checksum, which means that all journal blocks written during that first mount are corrupt. Transactions written after the second mount will be fine, since the feature flag will be set in the journal superblock. xfstests generic/{034,321,322} are the regression tests. (This is important for 3.18.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM> Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-26jbd2: remove unnecessary NULL check before iput()Theodore Ts'o
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-30jbd2: use a better hash function for the revoke tableTheodore Ts'o
The old hash function didn't work well for 64-bit block numbers, and used undefined (negative) shift right behavior. Use the generic 64-bit hash function instead. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
2014-09-18jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_listJan Kara
__jbd2_journal_clean_checkpoint_list() returns number of buffers it freed but noone was using the value so just stop doing that. This also allows for simplifying the calling convention for journal_clean_once_cp_list(). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-18jbd2: avoid pointless scanning of checkpoint listsJan Kara
Yuanhan has reported that when he is running fsync(2) heavy workload creating new files over ramdisk, significant amount of time is spent in __jbd2_journal_clean_checkpoint_list() trying to clean old transactions (but they cannot be cleaned up because flusher hasn't yet checkpointed those buffers). The workload can be generated by: fs_mark -d /fs/ram0/1 -D 2 -N 2560 -n 1000000 -L 1 -S 1 -s 4096 Reduce the amount of scanning by stopping to scan the transaction list once we find a transaction that cannot be checkpointed. Note that this way of cleaning is still enough to keep freeing space in the journal after fully checkpointed transactions. Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-16jbd2: jbd2_log_wait_for_space improve error detetcionDmitry Monakhov
If EIO happens after we have dropped j_state_lock, we won't notice that the journal has been aborted. So it is reasonable to move this check after we have grabbed the j_checkpoint_mutex and re-grabbed the j_state_lock. This patch helps to prevent false positive complain after EIO. #DMESG: __jbd2_log_wait_for_space: needed 8448 blocks and only had 8386 space available __jbd2_log_wait_for_space: no way to get more journal space in ram1-8 ------------[ cut here ]------------ WARNING: CPU: 15 PID: 6739 at fs/jbd2/checkpoint.c:168 __jbd2_log_wait_for_space+0x188/0x200() Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod CPU: 15 PID: 6739 Comm: fsstress Tainted: G W 3.17.0-rc2-00429-g684de57 #139 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 00000000000000a8 ffff88077aaab878 ffffffff815c1a8c 00000000000000a8 0000000000000000 ffff88077aaab8b8 ffffffff8106ce8c ffff88077aaab898 ffff8807c57e6000 ffff8807c57e6028 0000000000002100 ffff8807c57e62f0 Call Trace: [<ffffffff815c1a8c>] dump_stack+0x51/0x6d [<ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20 [<ffffffff812419f8>] __jbd2_log_wait_for_space+0x188/0x200 [<ffffffff8123be9a>] start_this_handle+0x4da/0x7b0 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810aba87>] ? lockdep_init_map+0xe7/0x180 [<ffffffff8123c5bc>] jbd2__journal_start+0xdc/0x1d0 [<ffffffff811f2414>] ? __ext4_new_inode+0x7f4/0x1330 [<ffffffff81222a38>] __ext4_journal_start_sb+0xf8/0x110 [<ffffffff811f2414>] __ext4_new_inode+0x7f4/0x1330 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190 [<ffffffff812025bb>] ext4_create+0x8b/0x150 [<ffffffff8117fe3b>] vfs_create+0x7b/0xb0 [<ffffffff8118097b>] do_last+0x7db/0xcf0 [<ffffffff8117e31d>] ? inode_permission+0x4d/0x50 [<ffffffff811845d2>] path_openat+0x242/0x590 [<ffffffff81191a76>] ? __alloc_fd+0x36/0x140 [<ffffffff81184a6a>] do_filp_open+0x4a/0xb0 [<ffffffff81191b61>] ? __alloc_fd+0x121/0x140 [<ffffffff81172f20>] do_sys_open+0x170/0x220 [<ffffffff8117300e>] SyS_open+0x1e/0x20 [<ffffffff811715d6>] SyS_creat+0x16/0x20 [<ffffffff815c7e12>] system_call_fastpath+0x16/0x1b ---[ end trace cd71c831f82059db ]--- Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-16jbd2: free bh when descriptor block checksum failsDarrick J. Wong
Free the buffer head if the journal descriptor block fails checksum verification. This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum verify error in do_one_pass". Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Cc: stable@vger.kernel.org
2014-09-11jbd2: fix journal checksum feature flag handlingDarrick J. Wong
Clear all three journal checksum feature flags before turning on whichever journal checksum options we want. Rearrange the error checking so that newer flags get complained about first. Reported-by: TR Reardon <thomas_reardon@hotmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-05jbd/jbd2: use non-movable memory for the jbd superblockGioh Kim
Sicne the jbd/jbd2 superblock is not released until the file system is unmounted, allocate the buffer cache from the non-moveable area to allow page migration and CMA allocations to more easily succeed. Signed-off-by: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-09-04jbd2: optimize jbd2_log_do_checkpoint() a bitJan Kara
When we discover written out buffer in transaction checkpoint list we don't have to recheck validity of a transaction. Either this is the last buffer in a transaction - and then we are done - or this isn't and then we can just take another buffer from the checkpoint list without dropping j_list_lock. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-04jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()Theodore Ts'o
The __jbd2_journal_remove_checkpoint() doesn't require an elevated b_count; indeed, until the jh structure gets released by the call to jbd2_journal_put_journal_head(), the bh's b_count is elevated by virtue of the existence of the jh structure. Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-02jbd2: fold __wait_cp_io into jbd2_log_do_checkpoint()Theodore Ts'o
__wait_cp_io() is only called by jbd2_log_do_checkpoint(). Fold it in to make it a bit easier to understand. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
generated by cgit v0.10.2 at 2024-11-07 13:32:28 (GMT)