summaryrefslogtreecommitdiff
path: root/fs/nilfs2/btree.c
AgeCommit message (Collapse)Author
2011-06-11nilfs2: fix missing block address termination in btree node shrinkingRyusuke Konishi
nilfs_btree_delete function does not terminate part of virtual block addresses when shrinking the last remaining child node into the root node. The missing address termination causes that dead btree node blocks persist and chip away free disk space. This fixes the leak bug on the btree node deletion. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-06-11nilfs2: fix incorrect block address termination in node concatenationRyusuke Konishi
nilfs_btree_delete function wrongly terminates virtual block address of the btree node held by its parent at index 0. When concatenating the index-0 node with its right sibling node, nilfs_btree_delete terminates the block address of index-0 node instead of the right sibling node which should be deleted. This bug not only wears disk space in the long run, but also causes file system corruption. This will fix it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10nilfs2: use mark_buffer_dirty to mark btnode or meta data dirtyRyusuke Konishi
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty, an own mark buffer dirty function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: record used amount of each checkpoint in checkpoint listRyusuke Konishi
This records the number of used blocks per checkpoint in each checkpoint entry of cpfile. Even though userland tools can get the block count via nilfs_get_cpinfo ioctl, it was not updated by the nilfs2 kernel code. This fixes the issue and makes it available for userland tools to calculate used amount per checkpoint. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Jiro SEKIBA <jir@unicus.jp>
2010-07-23nilfs2: apply read-ahead for nilfs_btree_lookup_contigRyusuke Konishi
This applies read-ahead to nilfs_btree_do_lookup and nilfs_btree_lookup_contig functions and extends them to read ahead siblings of level 1 btree nodes that hold data blocks. At present, the read-ahead is not applied to most btree operations; only get_block() callback function, which is used during read of regular files or directories, receives the benefit. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: introduce check flag to btree node bufferRyusuke Konishi
nilfs_btree_get_block() now may return untested buffer due to read-ahead. This adds a new flag for buffer heads so that the btree code can check whether the buffer is already verified or not. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: add btree get block function with readahead optionRyusuke Konishi
This adds __nilfs_btree_get_block() function that can issue a series of read-ahead requests for sibling btree nodes. This read-ahead needs parent node block, so nilfs_btree_readahead_info structure is added to pass the information that __nilfs_btree_get_block() needs. This also replaces the previous nilfs_btree_get_block() implementation with a wrapper function of __nilfs_btree_get_block(). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: add read ahead mode to nilfs_btnode_submit_blockRyusuke Konishi
This adds mode argument to nilfs_btnode_submit_block() function and allows it to issue a read-ahead request. An optional submit_ptr argument is also added to store the actual block address for which bio is sent. submit_ptr is used for a series of read-ahead requests, and helps to decide if each requested block is continous to the previous one on disk. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: eliminate inline keywords in btree implementationRyusuke Konishi
This removes all inline uses from btree.c. Gcc now agressively apply inline expansion even for the functions declared without the keyword; the inline use in btree.c looks excessive. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: get maximum number of child nodes from bmap objectRyusuke Konishi
The patch "reduce repetitive calculation of max number of child nodes" gathered up the calculation of maximum number of child nodes into nilfs_btree_nchildren_per_block() function. This makes the function get resultant value from a private variable in bmap object instead of calculating it for each call. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: reduce repetitive calculation of max number of child nodesRyusuke Konishi
The current btree implementation repeats the same calculation on the maximum number of child nodes. This is because a few low level routines use the calculation for index addressing in a btree node block. This reduces the calculation by explicitly passing the maximum number of child nodes (ncmax) through their argument. This changes parameter passing of the following functions: - nilfs_btree_node_dptrs - nilfs_btree_node_get_ptr - nilfs_btree_node_set_ptr - nilfs_btree_node_init - nilfs_btree_node_move_left - nilfs_btree_node_move_right - nilfs_btree_node_insert - nilfs_btree_node_delete, and - nilfs_btree_get_node The following functions are removed: - nilfs_btree_node_nchildren_min - nilfs_btree_node_nchildren_max Most middle level btree operations are rewritten to pass a proper ncmax value depending on whether each occurrence of node is "root" or not. A constant NILFS_BTREE_ROOT_NCHILDREN_MAX is used for the root node, whereas nilfs_btree_nchildren_per_block() function is used for non-root nodes. If a node could be either root or a non-root node, an output argument of nilfs_btree_get_node() is used to set up ncmax. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: optimize calculation of min/max number of btree node childrenRyusuke Konishi
nilfs_btree_node_nchildren_max() and nilfs_btree_node_nchildren_min() functions switch return value depending on whether target node is the root or a node block. In most uses of these functions, however, the node type is fixed, and moreover the same calculation is repeatedly performed in loop. This unfold these functions depending on context and move them outside loops wherever possible. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: remove redundant pointer checks in bmap lookup functionsRyusuke Konishi
nilfs_bmap_lookup and its variants are supposed to take a valid pointer argument to return a block address, thus pointer checks in nilfs_btree_lookup and nilfs_direct_lookup are needless. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: unify bmap set_target_v operationsRyusuke Konishi
This unifies two similar functions nilfs_btree_set_target_v and nilfs_direct_set_target_v into one, nilfs_bmap_set_target_v. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: get rid of nilfs_btree usesRyusuke Konishi
This replaces all uses of nilfs_btree struct in implementation of btree mapping with nilfs_bmap struct. Name of local variable "btree" is kept not to bloat amount of change. And, a part of local variables "bmap" is renamed to "btree" to uniform naming rule. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: remove constant qualifier from argument of bmap propagateRyusuke Konishi
The first argument of bops->bop_propagate operation takes a constant qualifier, and causes compilation error when removed cast to pointer of nilfs_btree structure type. This fixes the issue to prepare for succesive removal of nilfs_btree struct. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: get rid of private conversion macros on bmap key and pointerRyusuke Konishi
Will remove nilfs_bmap_key_to_dkey(), nilfs_bmap_dkey_to_key(), nilfs_bmap_ptr_to_dptr(), and nilfs_bmap_dptr_to_ptr() for simplicity. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: verify btree node after readingRyusuke Konishi
This inserts sanity checks soon after read btree node from disk. This allows early detection of broken btree nodes, and helps to narrow down problems due to file system corruption. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: add sanity check in nilfs_btree_add_dirty_bufferRyusuke Konishi
According to the report titled "problem with nilfs_cleanerd" from Łukasz Wójcicki, nilfs_btree_lookup_dirty_buffers or nilfs_btree_add_dirty_buffer got memory violation during garbage collection. This could happen if a level field of given btree node buffer is incorrect, which is a crucial internal bug. This inserts a sanity check to figure out the problem. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10nilfs2: cleanup multi kmem_cache_{create,destroy} codeLi Hong
This cleanup patch gives several improvements: - Moving all kmem_cache_{create_destroy} calls into one place, which removes some small function calls, cleans up error check code and clarify the logic. - Mark all initial code in __init section. - Remove some very obvious comments. - Adjust some declarations. - Fix some space-tab issues. Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10nilfs2: Combine nilfs_btree_release_path() and nilfs_btree_free_path()Li Hong
nilfs_btree_release_path() and nilfs_btree_free_path() are bound into each other tightly. Make them into one procedure to clearify the logic and avoid some misusages. Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10nilfs2: Combine nilfs_btree_alloc_path() and nilfs_btree_init_path()Li Hong
nilfs_btree_alloc_path() and nilfs_btree_init_path() are bound into each other tightly. Make them into one procedure to clearify the logic and avoid some misusages. Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-04-02nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()Li Hong
`make CONFIG_NILFS2_FS=m M=fs/nilfs2/` will give the following warnings: fs/nilfs2/btree.c: In function 'nilfs_btree_propagate': fs/nilfs2/btree.c:1882: warning: 'maxlevel' may be used uninitialized in this function fs/nilfs2/btree.c:1882: note: 'maxlevel' was declared here Set maxlevel = 0 to fix it. Signed-off-by: Li Hong <lihong.hi@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-28nilfs2: use list_splice_tail or list_splice_tail_initRyusuke Konishi
This applies list_splice_tail (or list_splice_tail_init) operation instead of list_splice (or list_splice_init, respectively) to append a new list to tail of an existing list. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: eliminate nilfs_btnode_get functionRyusuke Konishi
This removes the obsolete nilfs_btnode_get() function and makes nilfs_btree_get_block() directly call nilfs_btnode_submit_block(). This expansion will provide better opportunity for code optimization. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: use nilfs_btnode_create_block functionRyusuke Konishi
This displaces nilfs_btnode_get() use to create new btree node block with nilfs_btnode_create_block. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: remove buffer locking from btree codeRyusuke Konishi
lock_buffer() and unlock_buffer() uses in btree.c are eliminable because btree functions gain buffer heads through nilfs_btnode_get(), which never returns an on-the-fly buffer. Although nilfs_clear_dirty_page() and nilfs_copy_back_pages() in nilfs_commit_gcdat_inode() juggle btree node buffers of DAT, this is safe because these operations are protected by a log writer lock or the metadata file semaphore of DAT. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: get rid of BUG_ON use in btree lookup routinesRyusuke Konishi
The current btree lookup routines make a kernel oops when detected inconsistency in btree blocks. These routines should instead return a proper error code because the inconsistency usually comes from corruption of on-disk metadata. This fixes the issue by converting BUG_ON calls to proper error handlings. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: allow btree code to directly call dat operationsRyusuke Konishi
The current btree code is written so that btree functions call dat operations via wrapper functions in bmap.c when they allocate, free, or modify virtual block addresses. This abstraction requires additional function calls and causes frequent call of nilfs_bmap_get_dat() function since it is used in the every wrapper function. This removes the wrapper functions and makes them available from btree.c and direct.c, which will increase the opportunity of compiler optimization. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: stop zero-fill of btree path just before free itRyusuke Konishi
The btree path object is cleared just before it is freed. This will remove the code doing the unnecessary clear operation. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14nilfs2: remove unused btree argument from btree functionsRyusuke Konishi
Even though many btree functions take a btree object as their first argument, most of them are not used in their functions. This sticky use of the btree argument is hurting code readability and giving the possibility of inefficient code generation. So, this removes the unnecessary btree arguments. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: support contiguous lookup of blocksRyusuke Konishi
Although get_block() callback function can return extent of contiguous blocks with bh->b_size, nilfs_get_block() function did not support this feature. This adds contiguous lookup feature to the block mapping codes of nilfs, and allows the nilfs_get_blocks() function to return the extent information by applying the feature. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove nilfs_btree_operations from btree mappingRyusuke Konishi
will remove indirect function calls using nilfs_btree_operations table. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove bmap pointer operationsRyusuke Konishi
Previously, the bmap codes of nilfs used three types of function tables. The abuse of indirect function calls decreased source readability and suffered many indirect jumps which would confuse branch prediction of processors. This eliminates one type of the function tables, nilfs_bmap_ptr_operations, which was used to dispatch low level pointer operations of the nilfs bmap. This adds a new integer variable "b_ptr_type" to nilfs_bmap struct, and uses the value to select the pointer operations. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove useless b_low and b_high fields from nilfs_bmap structRyusuke Konishi
This will cut off 16 bytes from the nilfs_bmap struct which is embedded in the on-memory inode of nilfs. The b_high field was never used, and the b_low field stores a constant value which can be determined by whether the inode uses btree for block mapping or not. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr functionRyusuke Konishi
This indirect function is set to NULL only for gc cache inodes, but the gc cache inodes never call this function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: move get block functions in bmap.c into btree codesRyusuke Konishi
Two get block function for btree nodes, nilfs_bmap_get_block() and nilfs_bmap_get_new_block(), are called only from the btree codes. This relocation will increase opportunities of compiler optimization. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove nilfs_bmap_delete_blockRyusuke Konishi
nilfs_bmap_delete_block() is a wrapper function calling nilfs_btnode_delete(). This removes it for simplicity. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: remove nilfs_bmap_put_blockRyusuke Konishi
nilfs_bmap_put_block() is a wrapper function calling brelse(). This eliminates the wrapper for simplicity. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10nilfs2: unify bmap operations starting use of indirect block addressRyusuke Konishi
This simplifies some low level functions of bmap. Three bmap pointer operations, nilfs_bmap_start_v(), nilfs_bmap_commit_v(), and nilfs_bmap_abort_v(), are unified into one nilfs_bmap_start_v() function. And the related indirect function calls are replaced with it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-04-07nilfs2: replace BUG_ON and BUG calls triggerable from ioctlRyusuke Konishi
Pekka Enberg advised me: > It would be nice if BUG(), BUG_ON(), and panic() calls would be > converted to proper error handling using WARN_ON() calls. The BUG() > call in nilfs_cpfile_delete_checkpoints(), for example, looks to be > triggerable from user-space via the ioctl() system call. This will follow the comment and keep them to a minimum. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07nilfs2: clean up indirect function calling conventionsPekka Enberg
This cleans up the strange indirect function calling convention used in nilfs to follow the normal kernel coding style. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07nilfs2: B-tree based block mappingKoji Sato
This adds declarations and functions of NILFS2 B-tree. Two variants are integrated in the NILFS2 B-tree. The B-tree for the most files points to the child nodes or data blocks with virtual block addresses, whereas the B-tree of the DAT uses actual block addresses. Signed-off-by: Koji Sato <sato.koji@lab.ntt.co.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>