summaryrefslogtreecommitdiff
path: root/fs/xfs/xfs_mount.c
AgeCommit message (Collapse)Author
2016-05-26Merge tag 'xfs-for-linus-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs updates from Dave Chinner: "A pretty average collection of fixes, cleanups and improvements in this request. Summary: - fixes for mount line parsing, sparse warnings, read-only compat feature remount behaviour - allow fast path symlink lookups for inline symlinks. - attribute listing cleanups - writeback goes direct to bios rather than indirecting through bufferheads - transaction allocation cleanup - optimised kmem_realloc - added configurable error handling for metadata write errors, changed default error handling behaviour from "retry forever" to "retry until unmount then fail" - fixed several inode cluster writeback lookup vs reclaim race conditions - fixed inode cluster writeback checking wrong inode after lookup - fixed bugs where struct xfs_inode freeing wasn't actually RCU safe - cleaned up inode reclaim tagging" * tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits) xfs: fix warning in xfs_finish_page_writeback for non-debug builds xfs: move reclaim tagging functions xfs: simplify inode reclaim tagging interfaces xfs: rename variables in xfs_iflush_cluster for clarity xfs: xfs_iflush_cluster has range issues xfs: mark reclaimed inodes invalid earlier xfs: xfs_inode_free() isn't RCU safe xfs: optimise xfs_iext_destroy xfs: skip stale inodes in xfs_iflush_cluster xfs: fix inode validity check in xfs_iflush_cluster xfs: xfs_iflush_cluster fails to abort on error xfs: remove xfs_fs_evict_inode() xfs: add "fail at unmount" error handling configuration xfs: add configuration handlers for specific errors xfs: add configuration of error failure speed xfs: introduce table-based init for error behaviors xfs: add configurable error support to metadata buffers xfs: introduce metadata IO error class xfs: configurable error behavior via sysfs xfs: buffer ->bi_end_io function requires irq-safe lock ...
2016-05-20Merge branch 'xfs-4.7-error-cfg' into for-nextDave Chinner
2016-05-18xfs: add "fail at unmount" error handling configurationCarlos Maiolino
If we take "retry forever" literally on metadata IO errors, we can hang at unmount, once it retries those writes forever. This is the default behavior, unfortunately. Add an error configuration option for this behavior and default it to "fail" so that an unmount will trigger actuall errors, a shutdown and allow the unmount to succeed. It will be noisy, though, as it will log the errors and shutdown that occurs. To fix this, we need to mark the filesystem as being in the process of unmounting. Do this with a mount flag that is added at the appropriate time (i.e. before the blocking AIL sync). We also need to add this flag if mount fails after the initial phase of log recovery has been run. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18xfs: configurable error behavior via sysfsCarlos Maiolino
We need to be able to change the way XFS behaviours in error conditions depending on the type of underlying storage. This is necessary for handling non-traditional block devices with extended error cases, such as thin provisioned devices that can return ENOSPC as an IO error. Introduce the basic sysfs infrastructure needed to define and configure error behaviours. This is done to be generic enough to extend to configuring behaviour in other error conditions, such as ENOMEM, which also has different desired behaviours according to machine configuration. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-05xfs: improve kmem_reallocChristoph Hellwig
Use krealloc to implement our realloc function. This helps to avoid new allocations if we are still in the slab bucket. At least for the bmap btree root that's actually the common case. This also allows removing the now unused oldsize argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-06Merge branch 'xfs-misc-fixes-4.6-2' into for-nextDave Chinner
2016-03-06Merge branch 'xfs-buf-macro-cleanup-4.6' into for-nextDave Chinner
2016-03-01xfs: fix up inode32/64 (re)mount handlingEric Sandeen
inode32/inode64 allocator behavior with respect to mount, remount and growfs is a little tricky. The inode32 mount option should only enable the inode32 allocator heuristics if the filesystem is large enough for 64-bit inodes to exist. Today, it has this behavior on the initial mount, but a remount with inode32 unconditionally changes the allocation heuristics, even for a small fs. Also, an inode32 mounted small filesystem should transition to the inode32 allocator if the filesystem is subsequently grown to a sufficient size. Today that does not happen. This patch consolidates xfs_set_inode32 and xfs_set_inode64 into a single new function, and moves the "is the maximum inode number big enough to matter" test into that function, so it doesn't rely on the caller to get it right - which remount did not do, previously. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-10xfs: remove XBF_DONE flag wrapper macrosDave Chinner
They only set/clear/check a flag, no need for obfuscating this with a macro. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09xfs: mode di_mode to vfs inodeDave Chinner
Move the di_mode value from the xfs_icdinode to the VFS inode, reducing the xfs_icdinode byte another 2 bytes and collapsing another 2 byte hole in the structure. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-03Merge branch 'xfs-misc-fixes-for-4.4-2' into for-nextDave Chinner
2015-11-03xfs: don't leak uuid table on rmmodDarrick J. Wong
Don't leak the UUID table when the module is unloaded. (Found with kmemleak.) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12xfs: per-filesystem stats in sysfsBill O'Donnell
This patch implements per-filesystem stats objects in sysfs. It depends on the application of the previous patch series that develops the infrastructure to support both xfs global stats and xfs per-fs stats in sysfs. Stats objects are instantiated when an xfs filesystem is mounted and deleted on unmount. With this patch, the stats directory is created and populated with the familiar stats and stats_clear files. Example: /sys/fs/xfs/sda9/stats/stats /sys/fs/xfs/sda9/stats/stats_clear With this patch, the individual counts within the new per-fs stats file(s) remain at zero. Functions that use the the macros to increment, decrement, and add-to the per-fs stats counts will be covered in a separate new patch to follow this one. Note that the counts within the global stats file (/sys/fs/xfs/stats/stats) advance normally and can be cleared as it was prior to this patch. [dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so it is down before/after any path that uses the per-mount stats. ] Signed-off-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19xfs: clean up root inode properly on mount failureBrian Foster
The root inode is read as part of the xfs_mountfs() sequence and the reference is dropped in the event of failure after we grab the inode. The reference drop doesn't necessarily free the inode, however. It marks it for reclaim and potentially kicks off the reclaim workqueue. The workqueue is destroyed further up the error path, which means we are subject to crash if the workqueue job runs after this point or a memory leak which is identified if the xfs_inode_zone is destroyed (e.g., on module removal). Both of these outcomes are reproducible via manual instrumentation of a mount error after the root inode xfs_iget() call in xfs_mountfs(). Update the xfs_mountfs() error path to cancel any potential reclaim work items and to run a synchronous inode reclaim if the root inode is marked for reclaim. This ensures that no jobs remain on the queue before it is destroyed and that the root inode is freed before the reclaim mechanism is torn down. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18xfs: don't leave EFIs on AIL on mount failureBrian Foster
Log recovery occurs in two phases at mount time. In the first phase, EFIs and EFDs are processed and potentially cancelled out. EFIs without EFD objects are inserted into the AIL for processing and recovery in the second phase. xfs_mountfs() runs various other operations between the phases and is thus subject to failure. If failure occurs after the first phase but before the second, pending EFIs sit on the AIL, pin it and cause the mount to hang. Update the mount sequence to ensure that pending EFIs are cancelled in the event of failure. Add a recovery cancellation mechanism to iterate the AIL and cancel all EFI items when requested. Plumb cancellation support through the log mount finish helper and update xfs_mountfs() to invoke cancellation in the event of failure after recovery has started. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01Merge branch 'xfs-sparse-inode' into for-nextDave Chinner
2015-05-28xfs: sparse inode chunks feature helpers and mount requirementsBrian Foster
The sparse inode chunks feature uses the helper function to enable the allocation of sparse inode chunks. The incompatible feature bit is set on disk at mkfs time to prevent mount from unsupported kernels. Also, enforce the inode alignment requirements required for sparse inode chunks at mount time. When enabled, full inode chunks (and all inode record) alignment is increased from cluster size to inode chunk size. Sparse inode alignment must match the cluster size of the fs. Both superblock alignment fields are set as such by mkfs when sparse inode support is enabled. Finally, warn that sparse inode chunks is an experimental feature until further notice. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-28xfs: inode and free block counters need to use __percpu_counter_compareDave Chinner
Because the counters use a custom batch size, the comparison functions need to be aware of that batch size otherwise the comparison does not work correctly. This leads to ASSERT failures on generic/027 like this: XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099 ------------[ cut here ]------------ .... Call Trace: [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0 [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0 [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580 [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260 [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0 [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250 [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200 [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0 [<ffffffff811f3958>] evict+0xb8/0x190 [<ffffffff811f433b>] iput+0x18b/0x1f0 [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320 [<ffffffff811d548a>] ? filp_close+0x5a/0x80 [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40 [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71 This is a regression introduced by commit 501ab32 ("xfs: use generic percpu counters for inode counter"). This patch fixes the same problem for both the inode counter and the free block counter in the superblocks. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: remove xfs_mod_incore_sb APIDave Chinner
Now that there are no users of the bitfield based incore superblock modification API, just remove the whole damn lot of it, including all the bitfield definitions. This finally removes a lot of cruft that has been around for a long time. Credit goes to Christoph Hellwig for providing a great patch connecting all the dots to enale us to do this. This patch is derived from that work. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: replace xfs_mod_incore_sb_batchedDave Chinner
Introduce helper functions for modifying fields in the superblock into xfs_trans.c, the only caller of xfs_mod_incore_sb_batch(). We can then use these directly in xfs_trans_unreserve_and_mod_sb() and so remove another user of the xfs_mode_incore_sb() API without losing any functionality or scalability of the transaction commit code.. Based on a patch from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: introduce xfs_mod_frextentsDave Chinner
Add a new helper to modify the incore counter of free realtime extents. This matches the helpers used for inode and data block counters, and removes a significant users of the xfs_mod_incore_sb() interface. Based on a patch originally from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: Remove icsb infrastructureDave Chinner
Now that the in-core superblock infrastructure has been replaced with generic per-cpu counters, we don't need it anymore. Nuke it from orbit so we are sure that it won't haunt us again... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: use generic percpu counters for free block counterDave Chinner
XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: use generic percpu counters for free inode counterDave Chinner
XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free inode counter is not used for any limit enforcement - the per-AG free inode counters are used during allocation to determine if there are inode available for allocation. Hence we don't need any of the complexity of the hand-rolled counters and we can simply replace them with generic per-cpu counters similar to the inode counter. This version introduces a xfs_mod_ifree() helper function from Christoph Hellwig. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23xfs: use generic percpu counters for inode counterDave Chinner
XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. There are some warts around the use of them for the inode counter as the hand rolled counter is designed to be accurate at zero, but has no specific accurracy at any other value. This design causes problems for the maximum inode count threshold enforcement, as there is no trigger that balances the counters as they get close tothe maximum threshold. Instead of designing new triggers for balancing, just replace the handrolled per-cpu counter with a generic counter. This enables us to update the counter through the normal superblock modification funtions, but rather than do that we add a xfs_mod_icount() helper function (from Christoph Hellwig) and keep the percpu counter outside the superblock in the struct xfs_mount. This means we still need to initialise the per-cpu counter specifically when we read the superblock, and vice versa when we log/write it, but it does mean that we don't need to change any other code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21xfs: sanitise sb_bad_features2 handlingDave Chinner
We currently have to ensure that every time we update sb_features2 that we update sb_bad_features2. Now that we log and format the superblock in it's entirety we actually don't have to care because we can simply update the sb_bad_features2 when we format it into the buffer. This removes the need for anything but the mount and superblock formatting code to care about sb_bad_features2, and hence removes the possibility that we forget to update bad_features2 when necessary in the future. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21xfs: consolidate superblock logging functionsDave Chinner
We now have several superblock loggin functions that are identical except for the transaction reservation and whether it shoul dbe a synchronous transaction or not. Consolidate these all into a single function, a single reserveration and a sync flag and call it xfs_sync_sb(). Also, xfs_mod_sb() is not really a modification function - it's the operation of logging the superblock buffer. hence change the name of it to reflect this. Note that we have to change the mp->m_update_flags that are passed around at mount time to a boolean simply to indicate a superblock update is needed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-01-21xfs: remove bitfield based superblock updatesDave Chinner
When we log changes to the superblock, we first have to write them to the on-disk buffer, and then log that. Right now we have a complex bitfield based arrangement to only write the modified field to the buffer before we log it. This used to be necessary as a performance optimisation because we logged the superblock buffer in every extent or inode allocation or freeing, and so performance was extremely important. We haven't done this for years, however, ever since the lazy superblock counters pulled the superblock logging out of the transaction commit fast path. Hence we have a bunch of complexity that is not necessary that makes writing the in-core superblock to disk much more complex than it needs to be. We only need to log the superblock now during management operations (e.g. during mount, unmount or quota control operations) so it is not a performance critical path anymore. As such, remove the complex field based logging mechanism and replace it with a simple conversion function similar to what we use for all other on-disk structures. This means we always log the entirity of the superblock, but again because we rarely modify the superblock this is not an issue for log bandwidth or CPU time. Indeed, if we do log the superblock frequently, delayed logging will minimise the impact of this overhead. [Fixed gquota/pquota inode sharing regression noticed by bfoster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-12-03Merge branch 'xfs-misc-fixes-for-3.19-2' into for-nextDave Chinner
Conflicts: fs/xfs/xfs_iops.c
2014-12-03xfs: move type conversion functions to xfs_dir.hDave Chinner
These are currently considered private to libxfs, but they are widely used by the userspace code to decode, walk and check directory structures. Hence they really form part of the external API and as such need to bemoved to xfs_dir2.h. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28Merge branch 'xfs-consolidate-format-defs' into for-nextDave Chinner
2014-11-28xfs: merge xfs_inum.h into xfs_format.hChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28xfs: merge xfs_ag.h into xfs_format.hChristoph Hellwig
More on-disk format consolidation. A few declarations that weren't on-disk format related move into better suitable spots. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28xfs: merge xfs_dinode.h into xfs_format.hChristoph Hellwig
More consolidatation for the on-disk format defintions. Note that the XFS_IS_REALTIME_INODE moves to xfs_linux.h instead as it is not related to the on disk format, but depends on a CONFIG_ option. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-28xfs: allow lazy sb counter sync during filesystem freeze sequenceBrian Foster
The expectation since the introduction the lazy superblock counters is that the counters are synced and superblock logged appropriately as part of the filesystem freeze sequence. This does not occur, however, due to the logic in xfs_fs_writable() that prevents progress when the fs is in any state other than SB_UNFROZEN. While this is a bug, it has not been exposed to date because the last thing XFS does during freeze is dirty the log. The log recovery process recalculates the counters from AGI/AGF metadata to ensure everything is correct. Therefore should a crash occur while an fs is frozen, the subsequent log recovery puts everything back in order. See the following commit for reference: 92821e2b [XFS] Lazy Superblock Counters We might not always want to rely on dirtying the log on a frozen fs. Modify xfs_log_sbcount() to proceed when the filesystem is freezing but not once the freeze process has completed. Modify xfs_fs_writable() to accept the minimum freeze level for which modifications should be blocked to support various codepaths. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-01Merge branch 'xfs-buf-iosubmit' into for-nextDave Chinner
2014-10-01xfs: check xfs_buf_read_uncached returns correctlyDave Chinner
xfs_buf_read_uncached() has two failure modes. If can either return NULL or bp->b_error != 0 depending on the type of failure, and not all callers check for both. Fix it so that xfs_buf_read_uncached() always returns the error status, and the buffer is returned as a function parameter. The buffer will only be returned on success. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-29xfs: xfs_kset should be static Dave Chinner
As it is accessed through the struct xfs_mount and can be set up entirely from fs/xfs/xfs_super.c Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-08-04Merge branch 'xfs-misc-fixes-3.17-2' into for-nextDave Chinner
2014-08-04Merge branch 'xfs-misc-fixes-3.17-1' into for-nextDave Chinner
2014-08-04xfs: fix coccinelle warningskbuild test robot
Removes unneeded semicolon, introduced by commit a70a4fa5 ("xfs: fix a couple error sequence jumps in xfs_mountfs"): fs/xfs/xfs_mount.c:858:24-25: Unneeded semicolon Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-08-04xfs: avoid false quotacheck after unclean shutdownEric Sandeen
The commit 83e782e xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD added a new function xfs_sb_quota_from_disk() which swaps on-disk XFS_OQUOTA_* flags for in-core XFS_GQUOTA_* and XFS_PQUOTA_* flags after the superblock is read. However, if log recovery is required, the superblock is read again, and the modified in-core flags are re-read from disk, so we have XFS_OQUOTA_* flags in memory again. This causes the XFS_QM_NEED_QUOTACHECK() test to be true, because the XFS_OQUOTA_CHKD is still set, and not XFS_GQUOTA_CHKD or XFS_PQUOTA_CHKD. Change xfs_sb_from_disk to call xfs_sb_quota_from disk and always convert the disk flags to in-memory flags. Add a lower-level function which can be called with "false" to not convert the flags, so that the sb verifier can verify exactly what was on disk, per Brian Foster's suggestion. Reported-by: Cyril B. <cbay@excellency.fr> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2014-07-29xfs: require 64-bit sector_tChristoph Hellwig
Trying to support tiny disks only and saving a bit memory might have made sense on an SGI O2 15 years ago, but is pretty pointless today. Remove the rarely tested codepath that uses various smaller in-memory types to reduce our test matrix and make the codebase a little bit smaller and less complicated. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24xfs: allow inode allocations in post-growfs disk spaceEric Sandeen
Today, if we perform an xfs_growfs which adds allocation groups, mp->m_maxagi is not properly updated when the growfs is complete. Therefore inodes will continue to be allocated only in the AGs which existed prior to the growfs, and the new space won't be utilized. This is because of this path in xfs_growfs_data_private(): xfs_growfs_data_private xfs_initialize_perag(mp, nagcount, &nagimax); if (mp->m_flags & XFS_MOUNT_32BITINODES) index = xfs_set_inode32(mp); else index = xfs_set_inode64(mp); if (maxagi) *maxagi = index; where xfs_set_inode* iterates over the (old) agcount in mp->m_sb.sb_agblocks, which has not yet been updated in the growfs path. So "index" will be returned based on the old agcount, not the new one, and new AGs are not available for inode allocation. Fix this by explicitly passing the proper AG count (which xfs_initialize_perag() already has) down another level, so that xfs_set_inode* can make the proper decision about acceptable AGs for inode allocation in the potentially newly-added AGs. This has been broken since 3.7, when these two xfs_set_inode* functions were added in commit 2d2194f. Prior to that, we looped over "agcount" not sb_agblocks in these calculations. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-14xfs: add xfs_mount sysfs kobjectBrian Foster
Embed a base kobject into xfs_mount. This creates a kobject associated with each XFS mount and a subdirectory in sysfs with the name of the filesystem. The subdirectory lifecycle matches that of the mount. Also add the new xfs_sysfs.[c,h] source files with some XFS sysfs infrastructure to facilitate attribute creation. Note that there are currently no attributes exported as part of the xfs_mount kobject. It exists solely to serve as a per-mount container for child objects. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-14xfs: fix a couple error sequence jumps in xfs_mountfs()Brian Foster
xfs_mountfs() has a couple failure conditions that do not jump to the correct labels. Specifically: - xfs_initialize_perag_data() failure does not deallocate the log even though it occurs after log initialization - xfs_mount_reset_sbqflags() failure returns the error directly rather than jump to the error sequence Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25xfs: global error sign conversionDave Chinner
Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-22xfs: Nuke XFS_ERROR macroEric Sandeen
XFS_ERROR was designed long ago to trap return values, but it's not runtime configurable, it's not consistently used, and we can do similar error trapping with ftrace scripts and triggers from userspace. Just nuke XFS_ERROR and associated bits. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-09Merge branch 'xfs-misc-fixes-3-for-3.16' into for-nextDave Chinner