| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 4.5-rc4
that resolve some reported issues.
One of them got reverted as it wasn't correct based on testing, and
all have been in linux-next for a while"
* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "8250: uniphier: allow modular build with 8250 console"
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
tty: Add support for PCIe WCH382 2S multi-IO card
serial/omap: mark wait_for_xmitr as __maybe_unused
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
8250: uniphier: allow modular build with 8250 console
tty: Drop krefs for interrupted tty lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"This has a few fixes from Filipe, along with a readdir fix from Dave
that we've been testing for some time"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: properly set the termination value of ctx->pos in readdir
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: remove no longer used function extent_read_full_page_nolock()
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fix from Dve Chinner:
"This contains a fix for an endian conversion issue in new CRC
validation in log recovery that was discovered on a ppc64 platform"
* tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix endianness error when checking log block crc on big endian platforms
|
|
The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.
There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.
We can get to that situation like that:
* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX
Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.
The report from Victor at
(http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
print shows that pattern:
Overflow: e
Overflow: 7fffffff
Overflow: 7fffffffffffffff
PAX: size overflow detected in function btrfs_real_readdir
fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
context: dir_context;
CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
Call Trace:
[<ffffffff81742f0f>] dump_stack+0x4c/0x7f
[<ffffffff811cb706>] report_size_overflow+0x36/0x40
[<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
[<ffffffff811dafc8>] iterate_dir+0xa8/0x150
[<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
[<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
Overflow: 1a
[<ffffffff811db070>] ? iterate_dir+0x150/0x150
[<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83
The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.
The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.
References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284
Reported-by: Victor <services@swwu.com>
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Since the checksum function and the field are both __le32, don't
perform endian conversion when comparing the two. This fixes mount
failures on ppc64.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Considering current pty code and multiple devpts instances, it's possible
to umount a devpts file system while a program still has /dev/tty opened
pointing to a previosuly closed pty pair in that instance. In the case all
ptmx and pts/N files are closed, umount can be done. If the program closes
/dev/tty after umount is done, devpts_kill_index will use now an invalid
super_block, which was already destroyed in the umount operation after
running ->kill_sb. This is another "use after free" type of issue, but now
related to the allocated super_block instance.
To avoid the problem (warning at ida_remove and potential crashes) for
this specific case, I added two functions in devpts which grabs additional
references to the super_block, which pty code now uses so it makes sure
the super block structure is still valid until pty shutdown is done.
I also moved the additional inode references to the same functions, which
also covered similar case with inode being freed before /dev/tty final
close/shutdown.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: stable@vger.kernel.org # 2.6.29+
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
radix-tree: fix oops after radix_tree_iter_retry
MAINTAINERS: trim the file triggers for ABI/API
dax: dirty inode only if required
thp: make deferred_split_scan() work again
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
um: asm/page.h: remove the pte_high member from struct pte_t
mm, hugetlb: don't require CMA for runtime gigantic pages
mm/hugetlb: fix gigantic page initialization/allocation
mm: downgrade VM_BUG in isolate_lru_page() to warning
mempolicy: do not try to queue pages from !vma_migratable()
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
vmstat: make vmstat_update deferrable
mm, vmstat: make quiet_vmstat lighter
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
memblock: don't mark memblock_phys_mem_size() as __init
dump_stack: avoid potential deadlocks
mm: validate_mm browse_rb SMP race condition
m32r: fix build failure due to SMP and MMU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"We have a few wire protocol compatibility fixes, ports of a few recent
CRUSH mapping changes, and a couple error path fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: MOSDOpReply v7 encoding
libceph: advertise support for TUNABLES5
crush: decode and initialize chooseleaf_stable
crush: add chooseleaf_stable tunable
crush: ensure take bucket value is valid
crush: ensure bucket id is valid before indexing buckets array
ceph: fix snap context leak in error path
ceph: checking for IS_ERR instead of NULL
|
|
In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.
For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().
We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events. IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface. It also adds some shared state that we'd have
store somewhere. I don't think anybody will want to bloat
__wait_queue_head for this.
I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT. So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list. Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()). We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.
Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.
Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event. Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.
EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previously the pfn_mkwrite() fault handler for raw block devices called
bldev_dax_fault() -> __dax_fault() to do a full DAX page fault.
Really what the pfn_mkwrite() fault handler needs to do is call
dax_pfn_mkwrite() to make sure that the radix tree entry for the given
PTE is marked as dirty so that a follow-up fsync or msync call will
flush it durably to media.
Fixes: 5a023cdba50c ("block: enable dax for raw block devices")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While doing some tests I ran into an hang on an extent buffer's rwlock
that produced the following trace:
[39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166]
[39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165]
[39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[39389.800016] irq event stamp: 0
[39389.800016] hardirqs last enabled at (0): [< (null)>] (null)
[39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800016] softirqs last disabled at (0): [< (null)>] (null)
[39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000
[39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158
[39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202
[39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101
[39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001
[39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000
[39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98
[39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40
[39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000
[39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0
[39389.800016] Stack:
[39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0
[39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895
[39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c
[39389.800016] Call Trace:
[39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60
[39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41
[39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44
[39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs]
[39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs]
[39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs]
[39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs]
[39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs]
[39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs]
[39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs]
[39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15
[39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8
[39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[39389.800012] irq event stamp: 0
[39389.800012] hardirqs last enabled at (0): [< (null)>] (null)
[39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35
[39389.800012] softirqs last disabled at (0): [< (null)>] (null)
[39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1
[39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000
[39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72
[39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206
[39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000
[39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c
[39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000
[39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98
[39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00
[39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000
[39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0
[39389.800012] Stack:
[39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98
[39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00
[39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58
[39389.800012] Call Trace:
[39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c
[39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41
[39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs]
[39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs]
[39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs]
[39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs]
[39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs]
[39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs]
[39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28
[39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs]
[39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf
[39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc
[39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs]
[39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs]
[39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44
[39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs]
[39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs]
[39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs]
[39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs]
[39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs]
[39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7
[39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7
[39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00
This happens because in the code path executed by the inode_paths ioctl we
end up nesting two calls to read lock a leaf's rwlock when after the first
call to read_lock() and before the second call to read_lock(), another
task (running the delayed items as part of a transaction commit) has
already called write_lock() against the leaf's rwlock. This situation is
illustrated by the following diagram:
Task A Task B
btrfs_ref_to_path() btrfs_commit_transaction()
read_lock(&eb->lock);
btrfs_run_delayed_items()
__btrfs_commit_inode_delayed_items()
__btrfs_update_delayed_inode()
btrfs_lookup_inode()
write_lock(&eb->lock);
--> task waits for lock
read_lock(&eb->lock);
--> makes this task hang
forever (and task B too
of course)
So fix this by avoiding doing the nested read lock, which is easily
avoidable. This issue does not happen if task B calls write_lock() after
task A does the second call to read_lock(), however there does not seem
to exist anything in the documentation that mentions what is the expected
behaviour for recursive locking of rwlocks (leaving the idea that doing
so is not a good usage of rwlocks).
Also, as a side effect necessary for this fix, make sure we do not
needlessly read lock extent buffers when the input path has skip_locking
set (used when called from send).
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
Signed-off-by: Yan, Zheng <zyan@redhat.com>
|
|
ceph_osdc_alloc_request() returns NULL on error, it never returns error
pointers.
Fixes: 5be0389dac66 ('ceph: re-send AIO write request when getting -EOLDSNAP error')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Not needed after the previous patch named
"Btrfs: fix page reading in extent_same ioctl leading to csum errors".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
In the extent_same ioctl, we were grabbing the pages (locked) and
attempting to read them without bothering about any concurrent IO
against them. That is, we were not checking for any ongoing ordered
extents nor waiting for them to complete, which leads to a race where
the extent_same() code gets a checksum verification error when it
reads the pages, producing a message like the following in dmesg
and making the operation fail to user space with -ENOMEM:
[18990.161265] BTRFS warning (device sdc): csum failed ino 259 off 495616 csum 685204116 expected csum 1515870868
Fix this by using btrfs_readpage() for reading the pages instead of
extent_read_full_page_nolock(), which waits for any concurrent ordered
extents to complete and locks the io range. Also do better error handling
and don't treat all failures as -ENOMEM, as that's clearly misleasing,
becoming identical to the checks and operation of prepare_uptodate_page().
The use of extent_read_full_page_nolock() was required before
commit f441460202cb ("btrfs: fix deadlock with extent-same and readpage"),
as we had the range locked in an inode's io tree before attempting to
read the pages.
Fixes: f441460202cb ("btrfs: fix deadlock with extent-same and readpage")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
In the extent_same ioctl we are getting the pages for the source and
target ranges and unlocking them immediately after, which is incorrect
because later we attempt to map them (with kmap_atomic) and access their
contents at btrfs_cmp_data(). When we do such access the pages might have
been relocated or removed from memory, which leads to an invalid memory
access. This issue is detected on a kernel with CONFIG_DEBUG_PAGEALLOC=y
which produces a trace like the following:
186736.677437] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[186736.680382] Modules linked in: btrfs dm_flakey dm_mod ppdev xor raid6_pq sha256_generic hmac drbg ansi_cprng acpi_cpufreq evdev sg aesni_intel aes_x86_64
parport_pc ablk_helper tpm_tis psmouse parport i2c_piix4 tpm cryptd i2c_core lrw processor button serio_raw pcspkr gf128mul glue_helper loop autofs4 ext4
crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last
unloaded: btrfs]
[186736.681319] CPU: 13 PID: 10222 Comm: duperemove Tainted: G W 4.4.0-rc6-btrfs-next-18+ #1
[186736.681319] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[186736.681319] task: ffff880132600400 ti: ffff880362284000 task.ti: ffff880362284000
[186736.681319] RIP: 0010:[<ffffffff81264d00>] [<ffffffff81264d00>] memcmp+0xb/0x22
[186736.681319] RSP: 0018:ffff880362287d70 EFLAGS: 00010287
[186736.681319] RAX: 000002c002468acf RBX: 0000000012345678 RCX: 0000000000000000
[186736.681319] RDX: 0000000000001000 RSI: 0005d129c5cf9000 RDI: 0005d129c5cf9000
[186736.681319] RBP: ffff880362287d70 R08: 0000000000000000 R09: 0000000000001000
[186736.681319] R10: ffff880000000000 R11: 0000000000000476 R12: 0000000000001000
[186736.681319] R13: ffff8802f91d4c88 R14: ffff8801f2a77830 R15: ffff880352e83e40
[186736.681319] FS: 00007f27b37fe700(0000) GS:ffff88043dda0000(0000) knlGS:0000000000000000
[186736.681319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[186736.681319] CR2: 00007f27a406a000 CR3: 0000000217421000 CR4: 00000000001406e0
[186736.681319] Stack:
[186736.681319] ffff880362287ea0 ffffffffa048d0bd 000000000009f000 0000000000001000
[186736.681319] 0100000000000000 ffff8801f2a77850 ffff8802f91d49b0 ffff880132600400
[186736.681319] 00000000000004f8 ffff8801c1efbe41 0000000000000000 0000000000000038
[186736.681319] Call Trace:
[186736.681319] [<ffffffffa048d0bd>] btrfs_ioctl+0x24cb/0x2731 [btrfs]
[186736.681319] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[186736.681319] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[186736.681319] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[186736.681319] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[186736.681319] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[186736.681319] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[186736.681319] Code: 0a 3c 6e 74 0d 3c 79 74 04 3c 59 75 0c c6 06 01 eb 03 c6 06 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 31 c9 48 89 e5 48 39 d1 74 13 <0f> b6
04 0f 44 0f b6 04 0e 48 ff c1 44 29 c0 74 ea eb 02 31 c0
(gdb) list *(btrfs_ioctl+0x24cb)
0x5e0e1 is in btrfs_ioctl (fs/btrfs/ioctl.c:2972).
2967 dst_addr = kmap_atomic(dst_page);
2968
2969 flush_dcache_page(src_page);
2970 flush_dcache_page(dst_page);
2971
2972 if (memcmp(addr, dst_addr, cmp_len))
2973 ret = BTRFS_SAME_DATA_DIFFERS;
2974
2975 kunmap_atomic(addr);
2976 kunmap_atomic(dst_addr);
So fix this by making sure we keep the pages locked and respect the same
locking order as everywhere else: get and lock the pages first and then
lock the range in the inode's io tree (like for example at
__btrfs_buffered_write() and extent_readpages()). If an ordered extent
is found after locking the range in the io tree, unlock the range,
unlock the pages, wait for the ordered extent to complete and repeat the
entire locking process until no overlapping ordered extents are found.
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
|
|
Merge fixes from Andrew Morton:
"18 fixes"
[ The 18 fixes turned into 17 commits, because one of the fixes was a
fix for another patch in the series that I just folded in by editing
the patch manually - hopefully correctly - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix memory leak in copy_huge_pmd()
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
mm/vmpressure.c: fix subtree pressure detection
mm: polish virtual memory accounting
mm: warn about VmData over RLIMIT_DATA
Documentation: cgroup-v2: add memory.stat::sock description
mm: memcontrol: drop superfluous entry in the per-memcg stats array
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
proc: revert /proc/<pid>/maps [stack:TID] annotation
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
MAINTAINERS: update Seth email
ocfs2/cluster: fix memory leak in o2hb_region_release
lib/test-string_helpers.c: fix and improve string_get_size() tests
thp: limit number of object to scan on deferred_split_scan()
thp: change deferred_split_count() to return number of THP in queue
thp: make split_queue per-node
|
|
Pull NFS client bugfix and cleanup from Trond Myklebust:
"Bugfix:
- pNFS: Fix for missing layoutreturn calls
Cleanup:
- pNFS: rename NFS_LAYOUT_RETURN_BEFORE_CLOSE for code clarity"
* tag 'nfs-for-4.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSE
pNFS: Fix missing layoutreturn calls
|
|
Commit b76437579d13 ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.
Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.
The cost is not in proportion to the usefulness as described in the
patch.
Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.
The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.
Siddesh said:
"The end users needed a way to identify thread stacks programmatically and
there wasn't a way to do that. I'm afraid I no longer remember (or have
access to the resources that would aid my memory since I changed
employers) the details of their requirement. However, I did do this on my
own time because I thought it was an interesting project for me and nobody
really gave any feedback then as to its utility, so as far as I am
concerned you could roll back the main thread maps information since the
information is available in the thread-specific files"
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When working with hugetlbfs ptes (which are actually pmds) is not valid to
directly use pte functions like pte_present() because the hardware bit
layout of pmds and ptes can be different. This is the case on s390.
Therefore we have to convert the hugetlbfs ptes first into a valid pte
encoding with huge_ptep_get().
Currently the /proc/<pid>/numa_maps code uses hugetlbfs ptes without
huge_ptep_get(). On s390 this leads to the following two problems:
1) The pte_present() function returns false (instead of true) for
PROT_NONE hugetlb ptes. Therefore PROT_NONE vmas are missing
completely in the "numa_maps" output.
2) The pte_dirty() function always returns false for all hugetlb ptes.
Therefore these pages are reported as "mapped=xxx" instead of
"dirty=xxx".
Therefore use huge_ptep_get() to correctly convert the hugetlb ptes.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
o2hb_region_release currently doesn't free o2hb_debug_buf
hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create. Also
we should call debugfs_remove before freeing its data, to prevent the risk
accessing debugfs rightly after its data has been freed.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
"This looks like a lot but it's a mixture of regression fixes as well
as fixes for longer standing issues.
1) Fix on-channel cancellation in mac80211, from Johannes Berg.
2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
module, from Eric Dumazet.
3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
Dumazet.
4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
bound, from Craig Gallek.
5) GRO key comparisons don't take lightweight tunnels into account,
from Jesse Gross.
6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
Dumazet.
7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
register them, otherwise the NEWLINK netlink message is missing
the proper attributes. From Thadeu Lima de Souza Cascardo.
8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
Schimmel
9) Handle fragments properly in ipv4 easly socket demux, from Eric
Dumazet.
10) Don't ignore the ifindex key specifier on ipv6 output route
lookups, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
tcp: avoid cwnd undo after receiving ECN
irda: fix a potential use-after-free in ircomm_param_request
net: tg3: avoid uninitialized variable warning
net: nb8800: avoid uninitialized variable warning
net: vxge: avoid unused function warnings
net: bgmac: clarify CONFIG_BCMA dependency
net: hp100: remove unnecessary #ifdefs
net: davinci_cpdma: use dma_addr_t for DMA address
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
netlink: not trim skb for mmaped socket when dump
vxlan: fix a out of bounds access in __vxlan_find_mac
net: dsa: mv88e6xxx: fix port VLAN maps
fib_trie: Fix shift by 32 in fib_table_lookup
net: moxart: use correct accessors for DMA memory
ipv4: ipconfig: avoid unused ic_proto_used symbol
bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
bnxt_en: Ring free response from close path should use completion ring
net_sched: drr: check for NULL pointer in drr_dequeue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2016-01-30
Here's a set of important Bluetooth fixes for the 4.5 kernel:
- Two fixes to 6LoWPAN code (one fixing a potential crash)
- Fix LE pairing with devices using both public and random addresses
- Fix allocation of dynamic LE PSM values
- Fix missing COMPATIBLE_IOCTL for UART line discipline
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Dynamically enabling DAX requires that the page cache first be flushed
and invalidated. This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees. Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Dave had a small collection of fixes to the new free space tree code,
one of which was keeping our sysfs files more up to date with feature
bits as different things get enabled (lzo, raid5/6, etc).
I should have kept the sysfs stuff for rc3, since we always manage to
trip over something. This time it was GFP_KERNEL from somewhere that
is NOFS only. Instead of rebasing it out I've put a revert in, and
we'll fix it properly for rc3.
Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
use-after-free in our tracepoints that Dave Jones reported"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "btrfs: synchronize incompat feature bits with sysfs files"
btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
btrfs: sysfs: check initialization state before updating features
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
btrfs: async-thread: Fix a use-after-free error for trace
Btrfs: fix race between fsync and lockless direct IO writes
btrfs: add free space tree to the cow-only list
btrfs: add free space tree to lockdep classes
btrfs: tweak free space tree bitmap allocation
btrfs: tests: switch to GFP_KERNEL
btrfs: synchronize incompat feature bits with sysfs files
btrfs: sysfs: introduce helper for syncing bits with sysfs files
btrfs: sysfs: add free-space-tree bit attribute
btrfs: sysfs: fix typo in compat_ro attribute definition
|
|
This reverts commit 14e46e04958df740c6c6a94849f176159a333f13.
This ends up doing sysfs operations from deep in balance (where we
should be GFP_NOFS) and under heavy balance load, we're making races
against sysfs internals.
Revert it for now while we figure things out.
Signed-off-by: Chris Mason <clm@fb.com>
|
|
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a
layoutreturn is needed, either due to a layout recall or to a
layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order
to clarify its purpose.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The HCIUARTGETDEVICE, HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctl are
missing the COMPATIBLE_IOCTL declaration.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
This was copied incorrectly from the __vmalloc call.
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
|
|
If the mount phase is not finished, we can't update the sysfs files.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
The layoutreturn code currently relies on pnfs_put_lseg() to initiate the
RPC call when conditions are right. A problem arises when we want to
free the layout segment from inside an inode->i_lock section (e.g. in
pnfs_clear_request_commit()), since we cannot sleep.
The workaround is to move the actual call to pnfs_send_layoutreturn()
to pnfs_put_layout_hdr(), which doesn't have this restriction.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This reverts commit 696249132158014d594896df3a81390616069c5c. The
cleaner thread can block freezing when there's a snapshot cleaning in
progress and the other threads get suspended first. From the logs
provided by Martin we're waiting for reading extent pages:
kernel: PM: Syncing filesystems ... done.
kernel: Freezing user space processes ... (elapsed 0.015 seconds) done.
kernel: Freezing remaining freezable tasks ...
kernel: Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0):
kernel: btrfs-cleaner D ffff88033dd13bc0 0 152 2 0x00000000
kernel: ffff88032ebc2e00 ffff88032e750000 ffff88032e74fa50 7fffffffffffffff
kernel: ffffffff814a58df 0000000000000002 ffffea000934d580 ffffffff814a5451
kernel: 7fffffffffffffff ffffffff814a6e8f 0000000000000000 0000000000000020
kernel: Call Trace:
kernel: [<ffffffff814a58df>] ? bit_wait+0x2c/0x2c
kernel: [<ffffffff814a5451>] ? schedule+0x6f/0x7c
kernel: [<ffffffff814a6e8f>] ? schedule_timeout+0x2f/0xd8
kernel: [<ffffffff81076f94>] ? timekeeping_get_ns+0xa/0x2e
kernel: [<ffffffff81077603>] ? ktime_get+0x36/0x44
kernel: [<ffffffff814a4f6c>] ? io_schedule_timeout+0x94/0xf2
kernel: [<ffffffff814a4f6c>] ? io_schedule_timeout+0x94/0xf2
kernel: [<ffffffff814a590b>] ? bit_wait_io+0x2c/0x30
kernel: [<ffffffff814a5694>] ? __wait_on_bit+0x41/0x73
kernel: [<ffffffff8109eba8>] ? wait_on_page_bit+0x6d/0x72
kernel: [<ffffffff8105d718>] ? autoremove_wake_function+0x2a/0x2a
kernel: [<ffffffff811a02d7>] ? read_extent_buffer_pages+0x1bd/0x203
kernel: [<ffffffff8117d9e9>] ? free_root_pointers+0x4c/0x4c
kernel: [<ffffffff8117e831>] ? btree_read_extent_buffer_pages.constprop.57+0x5a/0xe9
kernel: [<ffffffff8117f4f3>] ? read_tree_block+0x2d/0x45
kernel: [<ffffffff8116782a>] ? read_block_for_search.isra.34+0x22a/0x26b
kernel: [<ffffffff811656c3>] ? btrfs_set_path_blocking+0x1e/0x4a
kernel: [<ffffffff8116919b>] ? btrfs_search_slot+0x648/0x736
kernel: [<ffffffff81170559>] ? btrfs_lookup_extent_info+0xb7/0x2c7
kernel: [<ffffffff81170ee5>] ? walk_down_proc+0x9c/0x1ae
kernel: [<ffffffff81171c9d>] ? walk_down_tree+0x40/0xa4
kernel: [<ffffffff8117375f>] ? btrfs_drop_snapshot+0x2da/0x664
kernel: [<ffffffff8104ff21>] ? finish_task_switch+0x126/0x167
kernel: [<ffffffff811850f8>] ? btrfs_clean_one_deleted_snapshot+0xa6/0xb0
kernel: [<ffffffff8117eaba>] ? cleaner_kthread+0x13e/0x17b
kernel: [<ffffffff8117e97c>] ? btrfs_item_end+0x33/0x33
kernel: [<ffffffff8104d256>] ? kthread+0x95/0x9d
kernel: [<ffffffff8104d1c1>] ? kthread_parkme+0x16/0x16
kernel: [<ffffffff814a7b5f>] ? ret_from_fork+0x3f/0x70
kernel: [<ffffffff8104d1c1>] ? kthread_parkme+0x16/0x16
As this affects a released kernel (4.4) we need a minimal fix for
stable kernels.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108361
Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
CC: stable@vger.kernel.org # 4.4
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().
Fix the user-after-free bug by move the trace line before queue_work().
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
An fsync, using the fast path, can race with a concurrent lockless direct
IO write and end up logging a file extent item that points to an extent
that wasn't written to yet. This is because the fast fsync path collects
ordered extents into a local list and then collects all the new extent
maps to log file extent items based on them, while the direct IO write
path creates the new extent map before it creates the corresponding
ordered extent (and submitting the respective bio(s)).
So fix this by making the direct IO write path create ordered extents
before the extent maps and make the fast fsync path collect any new
ordered extents after it collects the extent maps.
Note that making the fsync handler call inode_dio_wait() (after acquiring
the inode's i_mutex) would not work and lead to a deadlock when doing
AIO, as through AIO we end up in a path where the fsync handler is called
(through dio_aio_complete_work() -> dio_complete() -> vfs_fsync_range())
before the inode's dio counter is decremented (inode_dio_wait() waits
for this counter to have a value of zero).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
The executive summary:
- ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
- Avoid useless rebuilds for zboot.
- jz4780: Add NEMC, BCH and NAND device tree nodes
- Initial support for the MicroChip's DT platform. As all the device
drivers are missing this is still of limited use.
- Some Loongson3 cleanups.
- The unavoidable whitespace polishing.
- Reduce clock skew when synchronizing the CPU cycle counters on CPU
startup.
- Add MIPS R6 fixes.
- Lots of cleanups across arch/mips as fallout from KVM.
- Lots of minor fixes and changes for IEEE 754-2008 support to the
FPU emulator / fp-assist software.
- Minor Ralink, BCM47xx and bcm963xx platform support improvments.
- Support SMP on BCM63168"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
MIPS: Update trap codes
MIPS: Move Cause.ExcCode trap codes to mipsregs.h
MIPS: KVM: Make kvm_mips_{init,exit}() static
MIPS: KVM: Refactor added offsetof()s
MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
"The two main changes are aio support in CephFS, and a series that
fixes several issues in the authentication key timeout/renewal code.
On top of that are a variety of cleanups and minor bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: remove outdated comment
libceph: kill off ceph_x_ticket_handler::validity
libceph: invalidate AUTH in addition to a service ticket
libceph: fix authorizer invalidation, take 2
libceph: clear messenger auth_retry flag if we fault
libceph: fix ceph_msg_revoke()
libceph: use list_for_each_entry_safe
ceph: use i_size_{read,write} to get/set i_size
ceph: re-send AIO write request when getting -EOLDSNAP error
ceph: Asynchronous IO support
ceph: Avoid to propagate the invalid page point
ceph: fix double page_unlock() in page_mkwrite()
rbd: delete an unnecessary check before rbd_dev_destroy()
libceph: use list_next_entry instead of list_entry_next
ceph: ceph_frag_contains_value can be boolean
ceph: remove unused functions in ceph_frag.h
|
|
Pull SMB3 fixes from Steve French:
"A collection of CIFS/SMB3 fixes.
It includes a couple bug fixes, a few for improved debugging of
cifs.ko and some improvements to the way cifs does key generation.
I do have some additional bug fixes I expect in the next week or two
(to address a problem found by xfstest, and some fixes for SMB3.11
dialect, and a couple patches that just came in yesterday that I am
reviewing)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
cifs: fix race between call_async() and reconnect()
Prepare for encryption support (first part). Add decryption and encryption key generation. Thanks to Metze for helping with this.
cifs: Allow using O_DIRECT with cache=loose
cifs: Make echo interval tunable
cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary
Print IP address of unresponsive server
cifs: Ratelimit kernel log messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull final vfs updates from Al Viro:
- The ->i_mutex wrappers (with small prereq in lustre)
- a fix for too early freeing of symlink bodies on shmem (they need to
be RCU-delayed) (-stable fodder)
- followup to dedupe stuff merged this cycle
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: abort dedupe loop if fatal signals are pending
make sure that freeing shmem fast symlinks is RCU-delayed
wrappers for ->i_mutex access
lustre: remove unused declaration
|
|
Pull NFS client bugfixes and cleanups from Trond Myklebust:
"Bugfixes:
- pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
- pNFS/flexfiles: Improve merging of errors in LAYOUTRETURN
Cleanups:
- NFS: Simplify nfs_request_add_commit_list() arguments"
* tag 'nfs-for-4.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
NFS: Simplify nfs_request_add_commit_list() arguments
pNFS/flexfiles: Improve merging of errors in LAYOUTRETURN
|
|
If the program running dedupe receives a fatal signal during the
dedupe loop, we should bail out to avoid tying up the system.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are many locations that do
if (memory_was_allocated_by_vmalloc)
vfree(ptr);
else
kfree(ptr);
but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr(). Unless callers have special reasons, we can
replace this branch with kvfree(). Please check and reply if you found
problems.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
